Search NASA⌕ Search

SEARCH · Search NASA

Results for “Mechanism reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Defect-reduction mechanism for improving radiative efficiency in InGaN/GaN light-emitting diodes using InGaN underlayers

The influence of a dilute In{sub x}Ga{sub 1-x}N (x ∼ 0.03) underlayer (UL) grown below a single In{sub 0.16}Ga{sub 0.84}N quantum well (SQW), within a light-emitting diode (LED), on the radiative efficiency and deep level defect properties was studied using differential carrier lifetime (DCL) measurements and deep level optical spectroscopy (DLOS). DCL measurements found that inclusion of the UL significantly improved LED radiative efficiency. At low current densities, the non-radiative recombination rate of the LED with an UL was found to be 3.9 times lower than the LED without an UL, while the radiative recombination rates were nearly identical. This suggests that the improved radiative efficiency resulted from reduced non-radiative defect concentration within the SQW. DLOS measurement found the same type of defects in the InGaN SQWs with and without ULs. However, lighted capacitance-voltage measurements of the LEDs revealed a 3.4 times reduction in a SQW-related near-mid-gap defect state for the LED with an UL. Quantitative agreement in the reduction of both the non-radiative recombination rate (3.9×) and deep level density (3.4×) upon insertion of an UL corroborates deep level defect reduction as the mechanism for improved LED efficiency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The connector space reduction mechanism

The Connector Space Reduction Mechanism (CSRM) is a simple device that can reduce the number of electromechanical devices on the Payload Interface Adapter/Station Interface Adapter (PIA/SIA) from 4 to 1. The device uses simplicity to attack the heart of the connector mating problem for large interfaces. The CSRM allows blind mate connector mating with minimal alignment required over short distances. This eliminates potential interface binding problems and connector damage. The CSRM is compatible with G and H connectors and Moog Rotary Shutoff fluid couplings. The CSRM can be used also with less forgiving connectors, as was demonstrated in the lab. The CSRM is NASA-Goddard exclusive design with patent applied for. The CSRM is the correct mechanism for the PIA/SIA interface as well as other similar berthing interfaces.

Milam, M. Bruce↗

An uncertainty-aware strategy for plasma mechanism reduction with directed weighted graphs

In this work, we present a framework for the analysis and reduction of plasma mechanisms by means of weighted directed graphs, in which reactions and species are both treated as nodes. The methodology consists of two distinct analyses. The first, which is qualitative, relies on graph spatializations via force-directed algorithms to discover the predominant global patterns in the chemical model. The second ranks the reactions based on their shortest paths' lengths from/to the species of interest and their relative contributions to the power balance. Further, this quantitative investigation enables a strategy for mechanism reduction that is fully automatized, as it does not require any expert knowledge, highly effective, as it generates reduced mechanisms that are highly accurate while relying on a small number of processes, and easily interpretable, as the algorithm justifies the importance of the retained reactions by outputting their related chemical pathways. Additionally, the work proposes a methodology extension that employs ensembles of graphs to improve the robustness of the reduced mechanism to reaction parameter uncertainties. The approach, here tested for steady-state predictions of a plasma system characterizing negative hydrogen ion sources, is general and can be used in a wide variety of applications outside the particular nuclear fusion context demonstrated in this work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the ion-bombardment reduction mechanism

Recent laboratory studies of solar-wind reduction mechanisms on the lunar surface are discussed, emphasizing the effects of the electronic configurations of transition metals and the effects of covalent bonding. A series of experiments is described which involved argon ion bombardment of extremely thin targets consisting of simple halides and cyanides of first-row transition metals. Experimental results are summarized which imply that the cyanides generally have much higher reduction efficiencies than the halides. It is suggested that although reduction and sputtering take place concurrently under ion bombardment, they may actually be two independent processes.

Yin, L.↗

Temperature Dependence of the Oxygen Reduction Mechanism in Nonaqueous Li–O 2 Batteries

The temperature dependence of the oxygen reduction mechanism in Li-O 2 batteries was investigated using carbon nanotube-based air electrodes and 1,2-dimethoxyethane-based electrolyte within a temperature range of 20C to 40C. It is found that the discharge capacity of the Li-O 2 batteries decreases from 7,492 mAh g -1 at 40C to 2,930 mAh g -1 at 0C. However, a sharp increase in capacity was found when the temperature was further decreased and a very high capacity of 17,716 mAh g -1 was observed at 20C at a current density of 0.1 mA cm-2. When the temperature increases from 20C to 40C, the morphologies of the Li 2 O 2 formed varied from ultra-small spherical particles to small flakes and then to large flake-stacked toroids. The lifetime of superoxide and the solution pathway play a dominate role on the battery capacity in the temperature range of -20C to 0C, but the electrochemical kinetics of oxygen reduction and the surface pathway dominate the discharge behavior in the temperature range of 0C to 40C. These findings provide fundamental understanding on the temperature dependence of oxygen reduction process in a Li-O 2 battery and will enable a more rational design of Li-O 2 batteries.

25 ENERGY STORAGE↗

Friction and Wear Reduction Mechanism of Polyalkylene Glycol-Based Engine Oils

Polyalkylene glycols (PAG) have been explored as a possible base stock for engine oil formulation. The friction, wear, and load-carrying capacity of five different PAG chemistries were evaluated either as a base stock or as formulated oils in pure sliding and sliding-rolling conditions using various laboratory bench test rigs operating under boundary and mixed lubrication regimes. The results were compared against GF-5 SAE 5W-20 and a mineral-based oil. The wear surfaces were also characterized using various surface-sensitive techniques for analysis of tribofilms to understand the mechanism of friction reduction. The results indicated that PAG oils show lower friction/traction coefficients and improved load-carrying capability, depending on the formulation, than those of the GF-5 SAE 5W-20 and mineral-based oil. The adsorption of PAG molecules on the surface appeared to be responsible for the lower friction characteristics.

AES↗

Polyakov model in ’t Hooft flux background: a quantum mechanical reduction with memory

We construct a compactification of Polyakov model on T 2 × $\mathbb{R}$ down to quantum mechanics which remembers non-perturbative aspects of field theory even at an arbitrarily small area. Standard compactification on small T 2 × $\mathbb{R}$ possesses a unique perturbative vacuum (zero magnetic flux state), separated parametrically from higher flux states, and the instanton effects do not survive in the Born-Oppenheimer approximation. By turning on a background magnetic GNO flux in co-weight lattice corresponding to a non-zero ’t Hooft flux, we show that N-degenerate vacua appear at small torus, and there are N - 1 types of flux changing instantons between them. We construct QM instantons starting with QFT instantons using the method of replicas. For example, SU(2) gauge theory with flux reduces to the double-well potential where each well is a fractional flux state. Despite the absence of a mixed anomaly, the vacuum structure of QFT and the one of QM are continuously connected. We also compare the quantum mechanical reduction of the Polyakov model with the deformed Yang-Mills, by coupling both theories to TQFTs. In particular, we compare the mass spectrum for dual photons and energy spectrum in the QM limit. We give a detailed description of critical points at infinity in the semi-classical expansion, and their role in resurgence structure.

nonperturbative effects↗

ESCA studies on solar-wind reduction mechanisms

In a continuing study of solar-wind darkening on the lunar surface, ESCA techniques have been used to examine surface reduction and optical darkening by ion bombardment. Experimental results on transition metal fluorides have shown that ion-bombardment reduction is (a) accompanied by the loss of anion species, (b) relatively independent of the incident ion mass, and (c) not simply related to physical sputtering itself. The reduction mechanism may be more chemical in nature and the rate may be determined primarily by the transition metal ion

Yin, L.↗

Examination of the discharge mechanism of Li/CF(x) cells: Comparison of the electrochemical reduction mechanisms of PTFE and (CF(x))n by lithium

Swelling of (CF(x))(sub n) electrodes in commercial Li/(CF(x))(sub n) cells presents a limiting factor in cell design optimization. Examination of cathodes from such cells, after discharge, reveals a relation between cell operating temperatures and cathode swelling. Attempts to explain the swelling using the prevailing model for the cathode reaction have failed. A more suitable reaction mechanism is proposed based on the observed behavior of (CF(x))(sub n) electrodes on discharge and a comparison of the reaction products of (CF(x))(sub n) and polytetra fluoroethylene (PTFE) with lithium amalgams. The proposed mechanism is in agreement with the experimental data found in the literature.

Baxam, Carl C.↗

Vanguard Satellite Spin-Reduction Mechanism

The Cloud Cover Satellite flown in Vanguard vehicles SLV-3 and SLV-4 required a spin rate of 55 r.p.m. when entering orbit. Since the third-stage rocket was spin-stabilized in flight, and because other considerations required that the satellite remain attached long enough to acquire more than the desired 55 r.p.m., a satellite spin-reduction mechanism was developed. Although the mechanisms functioned properly in both flights, the desired spin rate was not achieved owing to uncontrollable flight effects. These effects make the prediction of satellite spin rates after a long pre-separation coasting period extremely difficult. To meet future requirements a control system is needed which can orient a payload according to a predetermined scheme and maintain that orientation for the desired period.

Baumann, Robert C.↗

Dual-Site Cascade Oxygen Reduction Mechanism on SnO x /Pt–Cu–Ni for Promoting Reaction Kinetics

Designing highly active oxygen reduction reaction (ORR) catalysts is crucial to boost the fuel cell economy. Previous research has mainly focused on Pt-based alloy catalysts in which surface Pt is the solely active site and the activity improvement was challenged by the discovered scaling relationship. In this paper, we report a new concept of utilizing dual active sites for the ORR and demonstrate its effectiveness by synthesizing a SnO x /Pt-Cu-Ni heterojunctioned catalyst. A maximum of 40% enhancement in the apparent specific activity, which corresponds to 10-fold enhancement on interface sites, is measured compared with pure Pt-Cu-Ni. Detailed investigations suggest an altered dual-site cascade mechanism wherein the first two steps occur on SnO x sites and the remaining steps occur on adjacent Pt sites, allowing a significant decrease in the energy barrier. This study with the suggested dual-site cascade mechanism shows the potential to overcome the ORR energy barrier bottleneck to develop highly active catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reduction mechanism of sulfur in lithium-sulfur battery: From elemental sulfur to polysulfide

In this study, the polysulfide ions formed during the first reduction wave of sulfur in Li–S battery were determined through both in-situ and ex-situ derivatization of polysulfides. By comparing the cyclic voltammetric results with and without the derivatization reagent (methyl triflate) as well as the in-situ and ex-situ derivatization results under potentiostatic condition, in-situ derivatization was found to be more appropriate than its ex-situ counterpart, since subsequent fast chemical reactions between the polysulfides and sulfur may occur during the timeframe of ex-situ procedures. It was found that the major polysulfide ions formed at the first reduction wave of elemental sulfur were the S 4 2– and S 5 2– species, while the widely accepted reduction products of S 8 2– and S 6 2– for the first reduction wave were in low abundance.

25 ENERGY STORAGE↗

An Examination of Drag Reduction Mechanisms in Marine Animals, with Potential Applications to Uninhabited Aerial Vehicles

Previous engineering research and development has documented the plausibility of applying biomimetic approaches to aerospace engineering. Past cooperation between the Virginia Institute of Marine Science (VIMS) and NASA focused on the drag reduction qualities of the microscale dermal denticles of shark skin. This technology has subsequently been applied to submarines and aircraft. The present study aims to identify and document the three-dimensional geometry of additional macroscale morphologies that potentially confer drag reducing hydrodynamic qualities upon marine animals and which could be applied to enhance the range and endurance of Uninhabited Aerial Vehicles (UAVs). Such morphologies have evolved over eons to maximize organismal energetic efficiency by reducing the energetic input required to maintain cruising speeds in the viscous marine environment. These drag reduction qualities are manifested in several groups of active marine animals commonly encountered by ongoing VIMS research programs: namely sharks, bony fishes such as tunas, and sea turtles. Through spatial data acquired by molding and digital imagery analysis of marine specimens provided by VIMS, NASA aims to construct scale models of these features and to test these potential drag reduction morphologies for application to aircraft design. This report addresses the efforts of VIMS and NASA personnel on this project between January and November 2001.

Musick, John A.↗

Hydrogen reduction mechanisms of ilmenite between 823 and 1353 K

In situ gravimetric measurements and microscopic examinations were used to determine the mechanisms of oxygen removal from synthetic ilmenite disks between 823 and 1353 K. Under a hydrogen atmosphere, iron was observed to form a layer of low porosity on the surface of samples early in the reduction. This created diffusion limitations for hydrogen to the reaction front and for the escape of water vapor. A shrinking core reduction model, modified to include the growth of this iron film, was capable of predicting the conversion-time relationships of ilmenite samples. An activation energy of 43.2 +/- 2.6 kcal/gmole was determined to be representative of reaction control over the temperature range 823-1023 K.

Briggs, R. A.↗

Revealing EDL-driven reduction mechanisms in binary, ternary, and quaternary fluorinated electrolytes via an integrated MD–DFT–ML framework

Accurately predicting solid electrolyte interphase (SEI) formation requires explicitly resolving the electric double layer (EDL) structure, which deviates significantly from that of the bulk electrolyte. Although an established molecular dynamics (MD) and Density Functional Theory (DFT) framework can model SEI formation by evaluating reduction reactions of local clusters in the EDL, it suffers from a combinatorial computational bottleneck. To overcome this limitation, we introduce a machine-learning-accelerated simulation workflow (MD–DFT–ML), integrating a gradient-boosted regression model trained on EDL composition data to efficiently predict reduction potentials. We apply this framework to seven fluorinated electrolytes comprising fluorinated anions, a fluorinated ester solvent, two types of diluent (ion-solvating ester vs. non-solvating ether), and an FEC additive. The analysis shows that the EDL selectively accumulates cation-binding species; consequently, the non–cation-binding ether diluent rarely enters the EDL and makes minimal contributions to SEI formation. DFT calculations on statistically representative EDL clusters provide reduction potentials and fluorine-release pathways, while the ML model, which substantially reduces the DFT workload, predicts cluster reduction energies with a mean absolute error of 0.1 eV. The combined MD–DFT–ML approach also quantifies contributions from different sources to LiF formation in the SEI. This methodology establishes a generalizable route for multiscale modeling electrolyte and interphase design for next-generation electrochemical energy-storage systems.

DFT-MD-ML workflow↗