Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metal(IV) phosphates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

On phosphorus chemical shift anisotropy in metal (IV) phosphates and phosphonates: A 31 P NMR experimental study

The phosphorus chemical shift anisotropies, 31 PΔcs, and asymmetry parameters η were measured by the 31 P{ 1 H} NMR experiments in static and low-frequency spinning samples of the zirconium phosphates and phosphonates and also in the mixed Zr (IV)/Sn (IV) phosphate/phosphonate material. The data obtained have shown a 111 connectivity in the HPO 4 and PO 3 groups, which does not change at modification and intercalation of the materials. The 31 PΔcs values of the phosphonate groups (43–49 ppm) significantly surpass the values characterizing the HPO 4 groups (23–37 ppm). The 31 P Δcs values obtained for the metal (IV) phosphates were discussed in terms of P-O distances. Finally, the 31 P chemical shift anisotropy parameters can help at elucidation of local structures in phosphate and phosphonate materials.

1H MAS NMR↗
DOE OSTI2023

Interaction of methanol with a layered α-Sn(IV) phosphate on its surface: A solid-state NMR study

Here, a layered crystalline phosphate, α-Sn(HPO 4 ) 2 ·H 2 O, treated with CD 3 OD was characterized by the 31 P, 119 Sn, 1 H and 2 H solid-state NMR techniques. The 2 H solid-echo MAS NMR spectra of the product have unexpectedly revealed deuterated hydronium ions on the surface of this material instead of intercalated methanol. According to the 13 C NMR and GC–MS studies, these ions are formed by water molecules following a dehydration of the methanol-d 4 to yield deuterated dimethyl ether.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Electrodeposited Aluminum Oxide as Alternative to Conventional Pretreatments

Iron and zinc phosphate pretreatments are still heavily used in both the oil & gas and automotive industries as adhesion promoters for paints and E-coat systems. These solutions are known to generate hazardous sludges and rinse water which must be periodically disposed of, a problem made worse by the increasing desire for aluminum alloy incorporation in vehicles. This presentation will introduce novel electrodeposited aluminum oxide pretreatments as a sustainable alternative to phosphates. The aluminum oxide coatings improve corrosion resistance and paint adhesion, generate no hazardous waste streams, are cost-effective, and can be applied to any metal surface. This new type of surface pretreatment can conform to TT-C-490 Type IV and VI for Military applications on both ferrous and non-ferrous surfaces as well as automotive specifications for equivalent civilian markets. The thin aluminum oxide treatment also supports the development of lightweight coatings systems for automotive and aerospace applications without sacrificing performance and is a perfect complement to the E-coating process. Since aluminum oxide uses a chemical binding mechanism for paints, the surface can even be modified to offer excellent paint adhesion and corrosion resistance directly to top-coats without the need for primer. This opens a pathway to fewer coating steps for simplified paint application and lightweight, next-generation coatings systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hydroxypyridinone-based stabilization of Np(IV) enabling efficient U/Np/Pu separations in the Adapted PUREX process

The classical process to recover uranium (U) and plutonium (Pu) from used nuclear fuel using tributyl phosphate (TBP), namely the Plutonium Uranium Redox EXtraction (PUREX) process, is complicated by the persistent presence of neptunium (Np) and thus requires extra purification steps. The concept of Adapted PUREX seeks to achieve Np recovery by adjusting the valence of the metal more effectively, thereby controlling its behavior more precisely. This study introduces the use of an aqueous hydroxypyridinone chelator, 3,4,3-LI(1,2-HOPO) (abbreviated as HOPO), to dictate the behavior of Np for recovery and meanwhile simplify cumbersome reprocessing steps. The interactions between Np and HOPO were probed mechanistically by way of absorption spectrophotometry, in conjunction with cyclic voltammetry. UV–Vis-NIR spectra illustrated the reduction of NpO 2 2+ to Np 4+ , with a fast reaction rate. Cyclic voltammetry revealed quasi-reversible processes between the oxidized and reduced forms of the ligand and its Np complexes. The corresponding heterogeneous rate constants (k 0 ) were estimated from the peak-to-peak separation potentials (ΔE p ), at ~ 4 – 35 μm/s for both HOPO and NpHOPO, with scan rates of 0.01 – 0.4 V/s. Meanwhile, the electromotive force (E MF ) as well as the change of Gibbs free energy (ΔG) were assessed from the half-wave potential (E 1/2 ), demonstrating the completeness of NpO 2 2+ reduction to Np 4+ by HOPO. The cumulative formation constant of the resulting NpHOPO complex (logβ 101 ) was determined by metal competition titration to be 42.0 ± 0.6, corroborating the extraordinarily high affinity of HOPO to tetravalent metal ions. Here, the prowess of valence control by HOPO and the high stability of the formed complex resulted in enhanced separations of Np from U and of Pu from U, with a maximum separation factor of ~7000 for both, nearly 90- and 10300-fold higher, respectively, than the values obtained using conventional PUREX formulae.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

Quantification of uranium metal and total uranium in U-UO 2 mixtures using H 3 PO 4 -HCl

Here, the selective dissolution of uranium metal from its mixtures with UO 2 was studied to establish a simple and rapid quantitative method. Uranium metal was found to selectively dissolve as U(IV) into a solution of phosphoric and hydrochloric acids, with quantitative dissolution occurring within 1 h. Total dissolution of uranium as U(VI) could then be obtained by nitric acid addition and heating for 0.5–1 h. Analysis of the resulting U(IV) and U(VI) solutions by ICP-OES or UV–Vis spectroscopy yielded uranium metal-to-UO 2 ratios with an accuracy of ± 10% or better. Accuracy of the ICP-OES method was slightly better than UV–Vis, but the simplicity of the latter makes it an attractive option for some applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Spin diffusion in the Phosphorus-31 NMR relaxation in a layered crystalline α-Sn(IV) phosphate contaminated by paramagnetic impurities

The study of a layered crystalline Sn(IV) phosphate by solid-state NMR has demonstrated that the 31 P T 1 relaxation of phosphate groups, dependent on spinning rate is completely controlled by the limited spin diffusion to paramagnetic ions found by EPR. The spin-diffusion constant, D(SD), was estimated as 2.04 10 –14 cm 2 s –1 . Finally, the conclusion was supported by the 31 P T 1 time measurements in zirconium phosphate 1–1, also showing paramagnetic ions and in diamagnetic compound (NH 4 ) 2 HPO 4 .

1H MAS NMR↗
DOE OSTI2025

Direct Evidence for Buffer-Enhanced Proton-Coupled Electron Transfer Generation of a High-Valent Metal-Oxo Complex

Here, the oxidation of metal-aquo and -hydroxo complexes to generate the high-valent metal-oxo species used in oxidative catalysis is often kinetically slow due to sluggish proton transfer between ligated −H 2 O/–OH in the proton-coupled electron transfer (PCET) chemistry. In this research, a ruthenium water oxidation catalyst anchored to a conductive tin-doped indium oxide (ITO) thin film, abbreviated ITO|Ru II –OH 2 , was characterized by spectroscopic and electrochemical methods in acetate or phosphate buffers. The deprotonated intermediate, Ru II –OH, was observed spectroscopically in the PCET half-reaction ITO(e – )|Ru III –OH + H + → ITO|Ru II –OH 2 indicating an underlying stepwise ET-PT mechanism. In contrast, at elevated buffer concentrations, this intermediate was absent, and a 2–4 order of magnitude increase in the proton transfer rate constant was observed. Kinetic data for this PCET reaction measured as a function of the driving force provided the reorganization energy λ = 1.05 eV and was assigned to a concerted electron–proton transfer (EPT) mechanism. In addition, the standard heterogeneous rate constants for two PCET equilibria, Ru III –OH + H + + e – ⇌ Ru II –OH 2 and Ru IV = O + H + + e – ⇌ Ru III –OH were enhanced by these same buffers. Collectively, the data show that the added buffers can enhance the kinetics and thermodynamics for PCET reactions relevant to oxidative catalysis.

Catalysts↗