Search NASA⌕ Search

SEARCH · Search NASA

Results for “Migration energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Migration energy barriers and diffusion anisotropy of point defects on tungsten surfaces

We report tungsten is one of the most promising candidates for plasma-facing materials in future fusion devices, owing to its high performance under extreme irradiation conditions. However, irradiation-induced surface morphology varies significantly, depending on the irradiation type, fluence, and flux. Therefore, it is critical to examine the dynamics of point defects on tungsten (W) surfaces to understand how irradiation affects surface morphology. In this study, we employ the Self-Evolving Atomistic Kinetic Monte Carlo (SEAKMC) method to search for potential migration paths of point defects on W (1 0 0), (1 1 0) and (1 1 1) surfaces. The first-principles calculations are then used to accurately determine the migration energy barriers. The obtained paths and barriers are incorporated into a kinetic Monte Carlo (KMC) model to determine trajectories and diffusivities, which are described by diffusion tensors to demonstrate their anisotropic features. Multiple diffusion mechanisms have been identified on different surfaces, with various anisotropy factors. Particularly, point defects on the W (1 1 0) surface have the highest diffusivities, with anisotropy factors independent of temperatures. In comparison, the anisotropy of the W (1 0 0) surface decreases as temperature increases, while the W (1 1 1) surface is isotropic for point defects. This study provides insights into defect transport properties on different surfaces, which are essential for understanding the early stages of irradiation-induced microstructural evolutions and surface morphology of tungsten.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Energy migration and scintillation kinetics in compositionally complex (Gd 1/4 Y 1/4 Tb 1/4 Lu 1/4 ) 3 Al 5 O 12 :Ce single crystal scintillator

It is well-established that compositional tuning through binary admixture can improve scintillation performance in several materials systems, including Ce-activated garnets. Although recent work on ternary or quaternary cation admixture shows promise, the impact of this increased compositional complexity on thermal stability and carrier-defect dynamics has not been addressed. Here, we investigate a compositionally complex garnet, (Gd 1/4 Y 1/4 Tb 1/4 Lu 1/4 ) 3 Al 5 O 12 :Ce (GYTLAG), grown by the Czochralski method using temperature-dependent photoluminescence (PL), PL decay, and thermoluminescence (TL). PL and PL decay measurements support a thermally activated Tb 3+ -Ce 3+ energy transfer, where Tb 3+ emission dominates below 60 K, but Ce 3+ emission increases from 20-300 K. Thermal quenching of Ce 3+ emission occurs around T 50 = 508 K, with an activation energy of 0.6 eV. TL and wavelength-resolved TL spectra from 20–500 K show that GYTLAG contains similar trap groups to LuAG but with a broader distribution of glow peaks below room temperature, possibly caused by quaternary cation mixing. A combination of dose dependence, partial cleaning and initial rise, and glow curve fitting to a first order continuous Gaussian distribution model are used to understand the contribution of electronic point defects to scintillation decay and afterglow at room temperature. Furthermore, these results inform how increased compositional complexity influences recombination dynamics in garnet scintillators.

Compositionally complex↗
DOE OSTI2020

Energy Migration Processes in Re(I) MLCT Complexes Featuring a Chromophoric Ancillary Ligand

We present herein the synthesis, structural characterization, electronic structure calculations, and ultrafast and supra-nanosecond photophysical properties of a series of five Re(I) bichromophores exhibiting metal to ligand charge transfer (MLCT) excited states based on the general formula fac -[Re(N ^ N)(CO) 3 (PNI-py)]PF 6, where PNI-py is 4-piperidinyl-1,8-naphthalimidepyridine and N ^ N is a diimine ligand ( Re1 – 5 ), along with their corresponding model chromophores where 4-ethylpyridine was substituted for PNI-py ( Mod1 – 5 ). The diimine ligands used include 1,10-phenanthroline (phen, 1 ), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (bcp, 2 ), 4,4'-di- tert -butyl-2,2'-bipyridine (dtbb, 3 ), 4,4'-diethyl ester-2,2'-bipyridine (deeb, 4 ), and 2,2'-biquinoline (biq, 5 ). In these metal–organic bichromophores, structural modification of the diimine ligand resulted in substantial changes to the observed energy transfer efficiencies between the two chromophores as a result of the variation in 3 MLCT excited-state energies. The photophysical properties and energetic pathways of the model chromophores were explored in parallel to accurately track the changes that arose from introduction of the organic chromophore pendant on the ancillary ligand. All relevant photophysical and energy transfer processes were probed and characterized using time-resolved photoluminescence spectroscopy, ultrafast and nanosecond transient absorption spectroscopy, and time-dependent density functional theory calculations. Of the five bichromophores in this study, four ( Re1 – 4 ) exhibited a thermal equilibrium between the 3 PNI-py and the 3 MLCT excited state, drastically extending the lifetimes of the parent model chromophores.

14 SOLAR ENERGY↗
DOE OSTI2026

Atomistic modeling of lanthanide diffusion in refractory body-centered cubic molybdenum

Lanthanide fission products can strongly interact with candidate cladding alloys, but their transport properties in refractory metals remain poorly understood. Here, in this work, we investigate the atomic-scale diffusion behavior of La, Ce, Pr, and Nd in body-centered cubic (bcc) molybdenum, a potential candidate for advanced nuclear cladding. Self-consistent mean-field transport modeling is performed to evaluate the fission product transport and vacancy mobility, informed by first-principles and nudged elastic band calculations of vacancy formation energies, migration barriers, and solute–vacancy binding characteristics. Compared with bcc Fe, lanthanide solutes in bcc Mo exhibit slower tracer diffusion due to higher vacancy formation and migration energies. Furthermore, the calculations reveal that the influence of fission products on migration barriers in bcc Mo are not as extensive in range compared to bcc Fe. Among the studied lanthanides, La exhibits the strongest vacancy binding while also being the fastest diffuser in Mo. These findings highlight how refractory bcc alloys can reduce fission product infiltration, offering valuable insight into the development of durable cladding systems for advanced reactors.

36 - MATERIALS SCIENCE↗
DOE OSTI2022

Xenon mobility in γ-uranium and uranium–molybdenum alloys

Diffusion in bcc uranium and U–Mo alloys is of great interest because fission gas and other fission products impact the performance of nuclear fuels. We investigate the mobility of xenon and molybdenum in bcc uranium (⁠$γ$-U) and metallic U–Mo alloys by calculating the migration energies of xenon and molybdenum for various local compositions using density functional theory. We also calculate the solute–vacancy binding energies of different solutes to vacancies in bcc uranium. We find that the solute–vacancy binding energy in bcc uranium is significantly higher than it is in other bcc metals (e.g., Fe and W). We also find that the migration energy of molybdenum is substantially higher than the migration energy of xenon, indicating that xenon is much more mobile than molybdenum in bcc uranium. The presence of molybdenum in the nearest-neighbor shell around a xenon atom typically increases the migration energy of xenon, which indicates a reduction of xenon mobility in U–Mo alloys compared to pure bcc uranium.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Influence of Hydrogen Isotopes on Vacancy Formation and Antisite Defect Diffusion in Palladium and Vanadium Metals

Density functional theory calculations are performed to study the interaction between hydrogen isotopes, vacancy, and antisite defects in Pd and V. Various defect configurations and defect-defect distances are systematically explored. Binding energies and migration energy barriers are calculated and tabulated. The study provides atomistic data for subsequent mesoscale simulations of tritium, vacancy, and antisite diffusion. In Pd, a strong binding is found between a vacancy and tritium (0.16 eV). This tritium binding increases the thermal concentration of vacancies by a factor of ~10 at 500 ?C. The increase in vacancy concentration enhances V antisite diffusion in Pd by a factor of ~6 at 500 ?C. The influence of tritium is even stronger in V, with a tritium and vacancy binding energy of 0.38 eV. Such a strong binding increases the thermal concentration of vacancies by a factor of ~300 at 500 ?C. The increase in vacancy concentration enhances Pd antisite diffusion in V by a factor of ~640 at 500 ?C. Vanadium and Pd exhibit a strong driving force to intermix with a formation energy of -1.57 eV for V antisite in Pd and -1.05 eV for Pd antisite in V. The results suggest vanadium diffusion into Pd is energetically stronger than the reverse. Zero-point-energy corrections are taken into account and calculations for hydrogen and tritium are presented.

Setyawan, Wahyu↗
DOE OSTI2025

Defect Stability in CdTe Based on Formation Energies and Migration Barriers

Native point defects are thought to play a key role in CdTe, either as compensation centers in intentionally doped material, as a source of conductivity in nominally undoped material, or as electron–hole recombination centers. Here, the discussion of their concentration and impact has often centered only on formation energies and transition levels. Using hybrid density functional calculations, including the effects of spin–orbit coupling (SOC), we discuss the stability of native point defects in CdTe based on their formation energies and migration barriers. We show that although Cd interstitials are the lowest energy donor defects, they are unstable at room temperature due to a low migration barrier. They are important for maintaining charge neutrality during growth or annealing at high temperatures, but once the material is brought to room temperature, they are not frozen in as often assumed and are expected to anneal out, leaving the other more stable defects to determine the conductivity. Taking this into account in the solution of the charge neutrality equation, we are able to predict the conductivity type and carrier concentrations that are in good agreement with experimental observations.

14 SOLAR ENERGY↗
DOE OSTI2022

Helium impurities and interactions in lithium

Here we investigate helium interactions with lithium using density functional theory. Like other body-centered cubic (bcc) metals, the lowest-energy site for interstitial helium is a tetrahedral site. However, helium in lithium shows a higher substitutional formation energy than either the tetrahedral or octahedral interstitial formation energies, which is unique. The calculated migration energies of helium in lithium are also very low ( ~ 1 meV), an order of magnitude lower than those in other bcc metals. We find an increase in the binding energy to a vacancy as the number of helium atoms bound to it increases. The extremely low migration energies suggest that helium transport in lithium will be very fast.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Stability and mobility of tungsten clusters on tungsten (110) surface: Ab initio and atomistic simulations

Quantifying the surface transport properties of tungsten (W) is of prime importance to understand the formation of nano-fuzz in fusion plasma-facing conditions. The stability and mobility of W adatom clusters (W n , n = 2-9) on the W(110) surface has been investigated by computer simulations, including ab initio calculations using density functional theory (DFT) and molecular statics (MS) simulations with multiple W interatomic potentials. The DFT results demonstrate that the sequential binding energy generally increases with number of W adatoms, except for the 5 th and 7 th W adatoms. The most common elemental migration steps of W n (n>2) clusters are observed to consist of monomer and dimer hops, while larger W n clusters can also diffuse by dissociation and recombination of smaller clusters. The threshold migration energy of W 9 is the highest, then followed by W 8 , W 4 , and W 6 , while W 3 , W 5 , and W 7 have similar migration energies. Compared to DFT, each interatomic potential evaluated overestimates the binding energies of W n clusters. Additionally, the embedded-atom potential developed by Juslin and Wirth adequately predicts the threshold migration energy of W n (n>2) clusters, although it predicts different underlying migration mechanisms. The results show that interaction mechanism between W adatoms controls the stability and mobility of W n clusters on the W(110) surface.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Analysis of position-dependent cavity parameters in irradiated metals to obtain insight on fundamental defect migration phenomena

Motion of point defects is a fundamental process that governs microstructure and properties of materials. Here, we examine the near-surface and grain boundary cavity swelling depth profiles in neutron- and ion-irradiated simple metals (Cu, Ni, and Fe-Cr) and investigate diffusional broadening of implanted Ni ions in Fe-Cr alloys. Vacancy migration energies and radiation-enhanced diffusion were experimentally estimated. Cavity denuded zone widths near planar sinks are shown to be dependent on temperature, damage rate, balance of point defects and sinks, and vacancy migration energies. An enhanced cavity swelling zone adjacent to the void-denuded zone was observed in specimens with low to moderate sink strength and interpreted as evidence of 1D gliding interstitial clusters. Radiation-enhanced diffusional broadening of implanted Ni ions (at 400–550 °C) in Fe and Fe-Cr was up to 250 nm toward the surface, which leads to a much broader near-peak-damage region where cavity swelling is suppressed. Diffusional broadening of implanted ions is calculated to be similarly pronounced for self-ion irradiations, particularly near the peak and higher swelling temperature regimes. Adequately high ion energies (~8–15 MeV) are recommended for ion-irradiation studies to provide a sufficiently broad midrange safe analysis region with minimized surface and injected ion effects.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interplay between defect transport and cation spin frustration in corundum-structured oxides

Despite the fundamental importance of mass transport, there is still a lack of knowledge regarding the mechanisms in many materials. In particular, how the magnetic spin structure interacts with migrating defects is unclear. In this work, using density functional theory to examine cation interstitial transport in antiferromagnetic corundum-structured oxides, we reveal an interplay between the migration of the interstitial and the magnetic structure of the oxide. The magnetic spin configuration impacts the migration energy of the migrating defect but, critically, the defect modifies the spin configuration. Thus, the two aspects change in concert to modify one another. This has profound implications for mass transport in magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Engineering defect energy landscape of CoCrFeNi high-entropy alloys by the introduction of additional dopants

The concept of high-entropy alloys (HEAs) focusing on tuning the overall chemical complexity represents a novel alloy design strategy. In contrast, alloying of a metallic matrix with minor doping elements with limited and localized tunability has been a common practice to improve material performance. Combining the idea of globally engineering defect energy landscape in HEAs and the localized doping strategy in dilute alloys, in this work, we explore doping effects of minor elements in a HEA matrix to further enhance the overall and localized chemical tunability, aiming to improve its irradiation resistance. Specifically, we study the influence of minor Al, Cu, Ti, and Pd substitutional doping elements on defect energetics in a CoCrFeNi model HEA based on density-functional theory (DFT) calculations. The DFT results indicate that the formation and migration energies of vacancies can be strongly influenced when a dopant is introduced at the first nearest neighbor shells around a vacancy. On the other hand, interstitial energetics are only slightly affected. Among the four elements, Ti and Pd generally decrease vacancy formation energies and increase vacancy migration energies more significantly than Al and Cu. The doping effects become more pronounced when the concentration of the substitutional dopants increases. Based on the energy distributions obtained from DFT, we build a kinetic Monte Carlo (kMC) model to assess the impact of dopants on vacancy-mediated diffusivity in the doped HEAs. Our results suggest that Ti and Pd can lower the tracer diffusivity in the considered HEAs and act as trapping sites, whereas Cu may enhance the atomic transport. This work indicates that substitutional doping in HEAs is an effective strategy in metallurgy to further tune the defect and transport properties of complex alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Development of interatomic potential and effect of ordering on defect properties in CrMnV

Developing materials that can withstand extreme environments, such as high radiation doses and elevated temperatures, is crucial for next-generation particle accelerators, including the 2.4 MW Long-Baseline Neutrino Facility. High-Entropy Alloys have emerged as promising candidates for beam window materials due to their superior mechanical strength, corrosion resistance, and radiation tolerance. In this study, we focus on the Cr–Mn–V alloy system, developing and employing machine-learning interatomic potentials (MLIPs) to investigate the formation of an ordered phase and its influence on defect properties. Using hybrid Monte Carlo-Molecular Dynamics simulations, we observe the formation of a B2-ordered phase at lower temperatures, consistent with Density Functional Theory (DFT) predictions. Ordered structures display a bimodal distribution of migration energies and reduced mean square displacement values, indicating suppressed vacancy diffusion. Our results also show that the migration energy barrier varies based on the atomic species, with Mn and V exhibiting the highest and lowest average barriers, respectively. These findings suggest that atomic ordering inhibits defect mobility, potentially enhancing the radiation resistance of CrMnV alloys. The validated MLIP provides a reliable framework for simulations that are faster than traditional DFT while maintaining the accuracy required to study defect and ordering properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Density functional theory study of formation and diffusion of hydrogen, deuterium, and tritium in Pd-V intermetallic compounds

Permeation of hydrogen isotopes in palladium/vanadium bimetallic membranes is known to deteriorate over time because of Pd-V interdiffusion. Additionally, intermetallic compounds may form in the interdiffusion region. Density functional theory is employed to study how Pd-V compounds may affect the permeation. Three compounds Pd 8 V, alpha-Pd 2 V, and PdV 4 are explored in this study. Formation and migration energies of hydrogen, deuterium, and tritium are calculated and subsequently compared to the data in pure Pd and V metals. The calculations show that both the formation and migration energies in the compounds are higher than in the pure metals. Thus, the permeation of these isotopes in the compounds is lower than in the pure metals. In addition, the least permeable compound is the one near the middle of the composition range, i.e. the alpha-Pd 2 V. The results provide atomistic insight for the permeation reduction in Pd/V membranes as interdiffusion progresses.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Predicting path-dependent diffusion barrier spectra in vast compositional space of multi-principal element alloys via convolutional neural networks

The emergent multi-principal element alloys (MPEAs) provide a vast compositional space to search for novel materials for technological advances. How to screen promising compositions from such an ample design space for targeted properties is a grand challenge. In this report, we demonstrate the state-of-the-art deep learning technology—convolutional neural network (CNN)—in predicting path-dependent vacancy migration energy barrier spectra, which are critical to diffusion behavior and many high-temperature properties, in the hyperdimensional composition space of MPEAs. The developed CNN model, fully capturing local chemical features surrounding each vacancy, accurately and efficiently predicts migration energy barrier of MPEAs with different degrees of chemical short-range order and at any unseen compositions. By varying the size of the local region encapsulating vacancy in the CNN model, we reveal that the length scale influencing vacancy migration is surprisingly extensive, up to its six nearest neighboring shells. The efforts of the CNN model make it promising for developing a database of diffusion barriers for various MPEA systems, which would have profound implications for accelerating alloy screening and discovering new compositions with desirable properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Atomistic modeling of interface strengthening in Al-Si eutectic alloys

Al-Si cast alloys are usually composed of α-Al and Al-Si eutectic. Si flakes and Al matrix generally hold cube-on-cube orientation relationship with the primary interface (111) Al ∥(111) Si . Extensive experimental studies demonstrated that Si flakes cannot significantly improve mechanical properties of Al-Si cast alloys. We hypothesize that the weak strengthening effect associated with Si flakes might be attributed to thermomechanical properties of Al-Si interfaces besides their morphologies. To characterize Al-Si interfaces with a large lattice mismatch (> 30%), we proposed the quasi-coincident site lattice (Q-CSL) as reference lattice, and demonstrated that the Q-CSL Al-Si coherent interface has three characteristic coherent structures, one stable and low energy structure and two metastable and high energy structures. The translation vectors for the same type of coherent Q-CSL structures are consistent with three displacement shift complete (DSC) vectors. The two metastable structures can be obtained by shifting the low energy structure with three partial DSC vectors. Semi-coherent interface is composed of the low energy Q-CSL patches and three sets of interface misfit dislocations with Burgers vectors same as the DSC vectors. Atomistic simulations revealed that Al-Si interface exhibits low shear resistance. Ideal shear strength of the Q-CSL coherent interface is 110 MPa and semi-coherent interface is 20 MPa. The low shear resistance is attributed to the glide of interface misfit dislocations. Al-Si interface also exhibits low formation and migration energies of point defects. Owing to low shear strength and low formation and migration energies of point defects, interface sliding or shear readily happen under mechanical loading or during dislocation-interface interactions. Lattice dislocations can cross slip onto or climb along Al-Si interfaces. These reactions decrease the number of accumulated dislocation loops around Si flakes and promote nucleation and emission of lattice dislocations from Al-Si interfaces to matrix, consequently reduce the repulsive force on approaching dislocations and weaken Si flakes strengthening effect. In situ tension and compression tests in a scanning electron microscope reveal relatively weak strengthening effect due to Si flakes, consistent with the computed dislocation interaction with interfaces and shear behavior of interfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Radiation-Enhanced Anion Transport in Hematite

The influence of radiation-induced (1 MeV energy H+ to ~0.1 dpa at 450°C), non-equilibrium point defect populations on mass transport is studied with an integrated campaign of experimental and theoretical methods. Using epitaxial thin films of hematite with embedded 18O tracer layers and nanoscale atom probe tomography measurements, it is shown that anion self-diffusion is enhanced by at least 2 orders of magnitude under irradiation compared to thermal diffusion alone. Complementary scanning transmission electron microscopy of vacuum annealed specimens, reveals associated microstructural changes in the oxide films, including local phase transformation to Fe3O4 and the development of nanoscale voids from vacancy coalescence. Point defect formation and migration energies were computed from density functional theory and applied within the context of chemical rate theory to analyze contributions from both interstitial and vacancy mechanisms to self-diffusion in thermal and irradiation conditions. Comparisons are made between calculated, literature and newly measured self-diffusion values, revealing good agreement on the magnitude of radiation-enhanced anion diffusion. Further, the model suggests a transition from vacancy to interstitialcy mechanisms at low temperatures and high oxygen activity, consistent with the varied activation energies reported from prior studies.

iron oxides, isotopic tracers, atom probe tomograp↗
DOE OSTI2021

Synthesis and Photophysical Properties of Light-Harvesting Gold Nanoclusters Fully Functionalized with Antenna Chromophores

The development of efficient light-harvesting systems is important to understand the key aspects of solar-energy conversion processes and to utilize them in various photonic applications. In this study, atomically well-defined gold nanoclusters are reported as a new platform to fabricate artificial light-harvesting systems. An efficient amide coupling method is developed to synthesize water-soluble Au 22 clusters fully protected with pyrene chromophores by taking advantage of their facile phase-transfer reaction. The synthesized Au 22 clusters with densely packed 18 pyrene chromophores (Au 22 –PyB 18 ) exhibit triple-emission in blue, green, and red wavelength regions arising respectively from pyrene monomer, pyrene excimer, and Au 22 emission, producing bright white light emission together. The photoluminescence of Au 22 is enhanced by more than tenfold, demonstrating that pyrenes at the periphery efficiently channel the absorbed energy to the luminescent Au 22 at the center. A combination of femtosecond transient absorption and anisotropy measurements of Au 22 –PyB 18 explicitly reveals three main decay components of 220 fs, 3.5 ps, and 160 ps that can be assigned to energy migration between pyrenes and energy transfer processes from pyrene monomer and excimer to the central Au 22 , respectively.

14 SOLAR ENERGY↗