Results for “Model-based design of experiment”

NASA NTRS1991

Model-based displays for satellite ground control

With the emergence of new technology for both human-computer interaction and knowledge-based systems, a range of opportunities exists to enhance the effectiveness and efficiency of satellite ground controllers. The use of models of operator function to represent operator activity in the context of changing system events and operator functions is illustrated. Although there are many models, the operator function model (OFM) was used in this research. In addition to representing operator activities, the OFM can be used to design 'intelligent' operator displays and, in real time, control the displayed information so that the operator has the appropriate information, at the appropriate time, and at the appropriate level of abstraction. The OFM was demonstrated in the context of a NASA Goddard Space Flight Center satellite ground control system. To evaluate the effectiveness of the model-based workstation, an experiment was conducted to compare system performance with a conventional operator workstation versus the model based workstation.

Mitchell, Christine M.↗

NASA NTRS1993

C-SIDE: The control-structure interaction demonstration experiment

The Control-Structure Interaction Demonstration Experiment (C-SIDE) is sponsored by the Electro-Optics and Cryogenics Division of Ball Aerospace Systems Group. Our objective is to demonstrate methods of solution to structure control problems utilizing currently available hardware in a system that is an extension of our corporate experience. The larger space structures with which Ball has been associated are the SEASAT radar antenna, Shuttle Imaging Radar (SIR) -A, -B and -C antennas and the Radarsat spacecraft. The motivation for the C-SIDE configuration is to show that integration of active figure control in the radar's system-level design can relieve antenna mechanical design constraints. This presentation is primarily an introduction to the C-SIDE testbed. Its physical and functional layouts, and major components are described. The sensor is of special interest as it enables direct surface figure measurements from a remote location. The Remote Attitude Measurement System (RAMS) makes high-rate, unobtrusive measurements of many locations, several of which may be collocated easily with actuators. The control processor is a 386/25 executing a reduced order model-based algorithm with provision for residual mode filters to compensate for structure interaction. The actuators for the ground demonstration are non-contacting, linear force devices. Results presented illustrate some basic characteristics of control-structure interaction with this hardware. The testbed will be used for evaluation of current technologies and for research in several areas. A brief indication of the evolution of the C-SIDE is given at the conclusion.

Mohl, James B.↗

NASA NTRS1988

Robust model-based controller synthesis for the SCOLE configuration

The design of a robust compensator is considered for the SCOLE configuration using a frequency-response shaping technique based on the LQG/LTR algorithm. Results indicate that a tenth-order compensator can be used to meet stability-performance-robustness conditions for a 26th-order SCOLE model without destabilizing spillover effects. Since the SCOLE configuration is representative of many proposed spaceflight experiments, the results and design techniques employed potentially should be applicable to a wide range of large space structure control problems.

Armstrong, E. S.↗

NASA NTRS1988

Application of model based control to robotic manipulators

A robot that can duplicate humam motion capabilities in such activities as balancing, reaching, lifting, and moving has been built and tested. These capabilities are achieved through the use of real time Model-Based Control (MBC) techniques which have recently been demonstrated. MBC accounts for all manipulator inertial forces and provides stable manipulator motion control even at high speeds. To effectively demonstrate the unique capabilities of MBC, an experimental robotic manipulator was constructed, which stands upright, balancing on a two wheel base. The mathematical modeling of dynamics inherent in MBC permit the control system to perform functions that are impossible with conventional non-model based methods. These capabilities include: (1) Stable control at all speeds of operation; (2) Operations requiring dynamic stability such as balancing; (3) Detection and monitoring of applied forces without the use of load sensors; (4) Manipulator safing via detection of abnormal loads. The full potential of MBC has yet to be realized. The experiments performed for this research are only an indication of the potential applications. MBC has no inherent stability limitations and its range of applicability is limited only by the attainable sampling rate, modeling accuracy, and sensor resolution. Manipulators could be designed to operate at the highest speed mechanically attainable without being limited by control inadequacies. Manipulators capable of operating many times faster than current machines would certainly increase productivity for many tasks.

Petrosky, Lyman J.↗

NASA NTRS1987

Effect of control sampling rates on model-based manipulator control schemes

The effect of changing the control sampling period on the performance of the computed-torque and independent joint control schemes is discussed. While the former utilizes the complete dynamics model of the manipulator, the latter assumes a decoupled and linear model of the manipulator dynamics. Researchers discuss the design of controller gains for both the computed-torque and the independent joint control schemes and establish a framework for comparing their trajectory tracking performance. Experiments show that within each scheme the trajectory tracking accuracy varies slightly with the change of the sampling rate. However, at low sampling rates the computed-torque scheme outperforms the independent joint control scheme. Based on experimental results, researchers also conclusively establish the importance of high sampling rates as they result in an increased stiffness of the system.

Khosla, P. K.↗

NASA NTRS1989

Knowledge-based process control and diagnostics for orbital cryogen transfer

AFDex is a rule based system designed to provide intelligent process control, diagnosis, and error recovery for a Shuttle based cryogenic experiment, SHOOT (Superfluid Helium On-Orbit Transfer). This paper describes the AFDex system in the context of traditional associative, model-based, and qualitative systems and discusses the implications of this first expert system in space.

Raymond, Eric A.↗

NASA NTRS1991

Getting expert systems off the ground: Lessons learned from integrating model-based diagnostics with prototype flight hardware

As an initial attempt to introduce expert system technology into an onboard environment, a model based diagnostic system using the TRW MARPLE software tool was integrated with prototype flight hardware and its corresponding control software. Because this experiment was designed primarily to test the effectiveness of the model based reasoning technique used, the expert system ran on a separate hardware platform, and interactions between the control software and the model based diagnostics were limited. While this project met its objective of showing that model based reasoning can effectively isolate failures in flight hardware, it also identified the need for an integrated development path for expert system and control software for onboard applications. In developing expert systems that are ready for flight, artificial intelligence techniques must be evaluated to determine whether they offer a real advantage onboard, identify which diagnostic functions should be performed by the expert systems and which are better left to the procedural software, and work closely with both the hardware and the software developers from the beginning of a project to produce a well designed and thoroughly integrated application.

Stephan, Amy↗

NASA NTRS1995

An approach to verification and validation of a reliable multicasting protocol: Extended Abstract

This paper describes the process of implementing a complex communications protocol that provides reliable delivery of data in multicast-capable, packet-switching telecommunication networks. The protocol, called the Reliable Multicasting Protocol (RMP), was developed incrementally using a combination of formal and informal techniques in an attempt to ensure the correctness of its implementation. Our development process involved three concurrent activities: (1) the initial construction and incremental enhancement of a formal state model of the protocol machine; (2) the initial coding and incremental enhancement of the implementation; and (3) model-based testing of iterative implementations of the protocol. These activities were carried out by two separate teams: a design team and a V&V team. The design team built the first version of RMP with limited functionality to handle only nominal requirements of data delivery. This initial version did not handle off-nominal cases such as network partitions or site failures. Meanwhile, the V&V team concurrently developed a formal model of the requirements using a variant of SCR-based state tables. Based on these requirements tables, the V&V team developed test cases to exercise the implementation. In a series of iterative steps, the design team added new functionality to the implementation while the V&V team kept the state model in fidelity with the implementation. This was done by generating test cases based on suspected errant or off-nominal behaviors predicted by the current model. If the execution of a test in the model and implementation agreed, then the test either found a potential problem or verified a required behavior. However, if the execution of a test was different in the model and implementation, then the differences helped identify inconsistencies between the model and implementation. In either case, the dialogue between both teams drove the co-evolution of the model and implementation. We have found that this interactive, iterative approach to development allows software designers to focus on delivery of nominal functionality while the V&V team can focus on analysis of off nominal cases. Testing serves as the vehicle for keeping the model and implementation in fidelity with each other. This paper describes (1) our experiences in developing our process model; and (2) three example problems found during the development of RMP. Although RMP has provided our research effort with a rich set of test cases, it also has practical applications within NASA. For example, RMP is being considered for use in the NASA EOSDIS project due to its significant performance benefits in applications that need to replicate large amounts of data to many network sites.

Callahan, John R.↗

NASA NTRS1995

An approach to verification and validation of a reliable multicasting protocol

This paper describes the process of implementing a complex communications protocol that provides reliable delivery of data in multicast-capable, packet-switching telecommunication networks. The protocol, called the Reliable Multicasting Protocol (RMP), was developed incrementally using a combination of formal and informal techniques in an attempt to ensure the correctness of its implementation. Our development process involved three concurrent activities: (1) the initial construction and incremental enhancement of a formal state model of the protocol machine; (2) the initial coding and incremental enhancement of the implementation; and (3) model-based testing of iterative implementations of the protocol. These activities were carried out by two separate teams: a design team and a V&V team. The design team built the first version of RMP with limited functionality to handle only nominal requirements of data delivery. In a series of iterative steps, the design team added new functionality to the implementation while the V&V team kept the state model in fidelity with the implementation. This was done by generating test cases based on suspected errant or off-nominal behaviors predicted by the current model. If the execution of a test was different between the model and implementation, then the differences helped identify inconsistencies between the model and implementation. The dialogue between both teams drove the co-evolution of the model and implementation. Testing served as the vehicle for keeping the model and implementation in fidelity with each other. This paper describes (1) our experiences in developing our process model; and (2) three example problems found during the development of RMP.

Callahan, John R.↗

NASA NTRS1994

An Approach to Verification and Validation of a Reliable Multicasting Protocol

This paper describes the process of implementing a complex communications protocol that provides reliable delivery of data in multicast-capable, packet-switching telecommunication networks. The protocol, called the Reliable Multicasting Protocol (RMP), was developed incrementally using a combination of formal and informal techniques in an attempt to ensure the correctness of its implementation. Our development process involved three concurrent activities: (1) the initial construction and incremental enhancement of a formal state model of the protocol machine; (2) the initial coding and incremental enhancement of the implementation; and (3) model-based testing of iterative implementations of the protocol. These activities were carried out by two separate teams: a design team and a V&V team. The design team built the first version of RMP with limited functionality to handle only nominal requirements of data delivery. In a series of iterative steps, the design team added new functionality to the implementation while the V&V team kept the state model in fidelity with the implementation. This was done by generating test cases based on suspected errant or offnominal behaviors predicted by the current model. If the execution of a test was different between the model and implementation, then the differences helped identify inconsistencies between the model and implementation. The dialogue between both teams drove the co-evolution of the model and implementation. Testing served as the vehicle for keeping the model and implementation in fidelity with each other. This paper describes (1) our experiences in developing our process model; and (2) three example problems found during the development of RMP.

Callahan, John R.↗

NASA NTRS2000

Validation of a "Kane's Dynamics" Model for the Active Rack Isolation System

Many microgravity space-science experiments require vibratory acceleration levels unachievable without active isolation. The Boeing Corporation's Active Rack Isolation System (ARIS) employs a novel combination of magnetic actuation and mechanical linkages, to address these isolation requirements on the International Space Station (ISS). ARIS provides isolation at the rack (international Standard Payload Rack, or ISPR) level. Effective model-based vibration isolation requires (1) an isolation device, (2) an adequate dynamic (i.e., mathematical) model of that isolator, and (3) a suitable, corresponding controller, ARIS provides the ISS response to the first requirement. In November 1999, the authors presented a response to the second ("A 'Kane's Dynamics' model for the Active Rack Isolation System", Hampton and Beech) intended to facilitate an optimal-controls approach to the third. This paper documents the validation of that high-fidelity dynamic model of ARIS. As before, this model contains the full actuator dynamics, however, the umbilical models are not included in this presentation. The validation of this dynamics model was achieved by utilizing two Commercial Off the Shelf (COTS) software tools: Deneb's ENVISION, and Online Dynamics' AUTOLEV. ENVISION is a robotics software package developed for the automotive industry that employs 3-dimensional (3-D) Computer Aided Design (CAD) models to facilitate both forward and inverse kinematics analyses. AUTOLEV is a DOS based interpreter that is designed in general to solve vector based mathematical problems and specifically to solve Dynamics problems using Kane's method.

Beech, Geoffrey S.↗

NASA NTRS2000

The 13th Technology of Deep Space One - Abstract

On October 24th, 1998, the Deep Space One (DS-1) spacecraft launched aboard a Delta II rocket as the first step towards the bold task of testing and validating 12 new technologies for future missions. This launch also represented yet another thrilling event; namely, the successful test and validation of a 13th heretofore undisclosed technology: model-based code-generation of the spacecraft's system-level fault-protection (FP) software from behavioral state diagrams and structural models.In this paper, we describe the process we used to leverage model-based code generation from state diagrams and structural specifications to better respond to the evolving requirements and scope of DS- I's system-level fault-protection design, development, test and operation. The evolution of the high-level design and the low-level changes in the flight software architecture and interfaces contributed to multiplying the number and frequency of fault-protection software releases thereby creating a multitude of software integration issues. To address the resulting software integration issues, we broadened the scope of code -eneration to other forms of model- based analysis techniques more traditionally associated with first-principle's reasoning about physical models. Additionally, we describe our in-flight launch and initial acquisition experience.

Rouquette, Nicolas↗

NASA NTRS2000

Verification and Validation of Autonomy Software at NASA

Autonomous software holds the promise of new operation possibilities, easier design and development, and lower operating costs. However, as those system close control loops and arbitrate resources on-board with specialized reasoning, the range of possible situations becomes very large and uncontrollable from the outside, making conventional scenario-based testing very inefficient. Analytic verification and validation (V&V) techniques, and model checking in particular, can provide significant help for designing autonomous systems in a more efficient and reliable manner, by providing a better coverage and allowing early error detection. This article discusses the general issue of V&V of autonomy software, with an emphasis towards model-based autonomy, model-checking techniques, and concrete experiments at NASA.

Pecheur, Charles↗

NASA NTRS2000

Verification and Validation of Autonomy Software at NASA

Autonomous software holds the promise of new operation possibilities, easier design and development and lower operating costs. However, as those system close control loops and arbitrate resources on board with specialized reasoning, the range of possible situations becomes very large and uncontrollable from the outside, making conventional scenario-based testing very inefficient. Analytic verification and validation (V&V) techniques, and model checking in particular, can provide significant help for designing autonomous systems in a more efficient and reliable manner, by providing a better coverage and allowing early error detection. This article discusses the general issue of V&V of autonomy software, with an emphasis towards model-based autonomy, model-checking techniques and concrete experiments at NASA.

Pecheur, Charles↗

NASA NTRS1997

Evaluation of Model-Based Training for Vertical Guidance Logic

This paper will summarize the results of a study which introduces a structured, model based approach to learning how the automated vertical guidance system works on a modern commercial air transport. The study proposes a framework to provide accurate and complete information in an attempt to eliminate confusion about 'what the system is doing'. This study will examine a structured methodology for organizing the ideas on which the system was designed, communicating this information through the training material, and displaying it in the airplane. Previous research on model-based, computer aided instructional technology has shown reductions in the amount of time to a specified level of competence. The lessons learned from the development of these technologies are well suited for use with the design methodology which was used to develop the vertical guidance logic for a large commercial air transport. The design methodology presents the model from which to derive the training material, and the content of information to be displayed to the operator. The study consists of a 2 X 2 factorial experiment which will compare a new method of training vertical guidance logic and a new type of display. The format of the material used to derive both the training and the display will be provided by the Operational Procedure Methodology. The training condition will compare current training material to the new structured format. The display condition will involve a change of the content of the information displayed into pieces that agree with the concepts with which the system was designed.

Feary, Michael↗

NASA NTRS1997

A Generative Control Capability for a Model-based Executive

This paper describes Burton, a core element of a new generation of goal-directed model-based autonomous executives. This executive makes extensive use of component-based declarative models to analyze novel situations and generate novel control actions both at the goal and hardware levels. It uses an extremely efficient online propositional inference engine to efficiently determine likely states consistent with current observations and optimal target states that achieve high level goals. It incorporates a flexible generative control sequencing algorithm within the reactive loop to bridge the gap between current and target states. The system is able to detect and avoid damaging and irreversible situations, After every control action it uses its model and sensors to detect anomalous situations and immediately take corrective action. Efficiency is achieved through a series of model compilation and online policy construction methods, and by exploiting general conventions of hardware design that permit a divide and conquer approach to planning. The paper presents a formal characterization of Burton's capability, develops efficient algorithms, and reports on experience with the implementation in the domain of spacecraft autonomy. Burton is being incorporated as one of the key elements of the Remote Agent core autonomy architecture for Deep Space One, the first spacecraft for NASA's New Millenium program.

Williams, Brian C.↗

NASA NTRS1996

Effects of adaptive task allocation on monitoring of automated systems

The effects of adaptive task allocation on monitoring for automation failure during multitask flight simulation were examined. Participants monitored an automated engine status task while simultaneously performing tracking and fuel management tasks over three 30-min sessions. Two methods of adaptive task allocation, both involving temporary return of the automated engine status task to the human operator ("human control"), were examined as a possible countermeasure to monitoring inefficiency. For the model-based adaptive group, the engine status task was allocated to all participants in the middle of the second session for 10 min, following which it was again returned to automation control. The same occurred for the performance-based adaptive group, but only if an individual participant's monitoring performance up to that point did not meet a specified criterion. For the nonadaptive control groups, the engine status task remained automated throughout the experiment. All groups had low probabilities of detection of automation failures for the first 40 min spent with automation. However, following the 10-min intervening period of human control, both adaptive groups detected significantly more automation failures during the subsequent blocks under automation control. The results show that adaptive task allocation can enhance monitoring of automated systems. Both model-based and performance-based allocation improved monitoring of automation. Implications for the design of automated systems are discussed.

Task Performance and Analysis↗

NASA NTRSDate not supplied

ARCTRON: A Rapid Experimental Proving Ground for TPS Experiments and Arcjet Technology Development

Innovation in high-enthalpy facilities is fundamentally limited by the cost and risk of experimentation. New concepts for plasma control, diagnostics, facility components, and plasma-material interaction often require repeated iterations that are impractical to perform in production arcjets. As a result, promising ideas may remain unexplored or reach operational facilities only after significant development effort. ARCTRON is being developed as a rapid experimental proving ground where new ideas in plasma science, arcjet engineering, diagnostics, and material response can be conceived, tested, and quantitatively evaluated before transition to large-scale facilities. The platform combines radio-frequency (RF) and DC arc plasma generation, externally applied magnetic fields, configurable gas composition, reduced-pressure operation, laser heating, electrical biasing, and modular diagnostic access. These capabilities permit the plasma source, applied forcing, test article, and measurement configuration to be modified independently, allowing individual physical mechanisms to be isolated more readily than in a traditional test environment. One class of investigations addresses fundamental plasma-surface interaction physics. Conventional material tests often expose a specimen simultaneously to convective heating, reactive species, pressure, shear, radiation, and surface-current effects. The resulting material response may be measured accurately, while the contribution of each mechanism remains difficult to identify. ARCTRON is designed to vary these effects selectively. Plasma chemistry can be changed independently through configurable gas mixtures; magnetic fields and electrical biasing can modify charged-particle transport; laser heating can provide a non-plasma thermal input; and pressure, flow, and discharge mode can be varied over a broad operating space. This enables controlled tests of hypotheses involving surface catalycity, reactive-species transport, plasma-assisted oxidation, electromagnetic effects, shear, and the relative contributions of thermal and chemical loading. A second class of investigations enabled by this approach concerns the engineering of high-enthalpy facilities themselves. Arc-heated facilities are limited by electrode erosion, unstable arc attachment, localized heating, and damage to nozzles and other plasma-facing components. ARCTRON provides a lower-cost environment for testing concepts intended to mitigate these limitations. Candidate investigations include the use of applied magnetic fields to alter current paths and reduce plasma interaction with nozzle walls, ExB forcing to introduce controlled plasma rotation, magnetic or geometric approaches for distributing arc attachment, and alternative electrode or discharge configurations intended to reduce erosion and improve stability. Because the platform is reconfigurable, these concepts can be evaluated through repeated design--build--test cycles before they are considered for implementation in operational facilities. The platform also supports the development and validation of diagnostics that may be difficult to introduce initially into a large arcjet. Current and planned measurements include spatially resolved optical emission spectroscopy, electrostatic probes, fast imaging, pyrometry, calorimetry, laser-induced fluorescence, and absorption spectroscopy. These diagnostics are intended not merely to document a nominal operating condition, but to constrain the local plasma state and its relationship to component or material response. The modular facility geometry allows diagnostic concepts to be tested, calibrated, and compared under repeatable conditions before deployment in more demanding environments. ARCTRON is also supported by an integrated software suite. Automated control and data acquisition allow discharge parameters, gas composition, magnetic fields, diagnostic timing, and test configuration to be recorded as part of each experiment (STARDAC - Software for Testing, Analysis, Research Data, and Control). The Backend for Experiment Analysis, Storage, and Traceability (BEAST) is a database that provides the infrastructure needed to associate heterogeneous measurements with facility configuration, specimen identity, calibration state, geometry, and analysis provenance. This backend is particularly important for exploratory campaigns, in which many related configurations may be tested, and the value of an individual experiment depends on its connection to earlier and subsequent iterations. Complementary analysis capabilities, including computer-vision-based transient response measurements (arcjetCV), three-dimensional surface reconstruction (STARSCAN), and model-based Bayesian inference (SHIELD), and tomography data analysis (TOMATO, PuMA) can be incorporated when required by a specific hypothesis without becoming the focus of every campaign. The central objective of ARCTRON is therefore not to maximize heat flux or reproduce a complete flight environment. Its purpose is to reduce the cost and time required to ask consequential questions about plasma behavior, plasma-facing materials, diagnostics, and arcjet technology. By providing a controlled environment for rapid reconfiguration, mechanism isolation, quantitative measurement, and iterative engineering, ARCTRON can help mature concepts that would otherwise remain too speculative or too risky for evaluation in production facilities. The resulting knowledge can then guide the design of material models, focus test objectives in larger arcjets, reduce facility-development risk, and improve the physical basis of high-enthalpy ground testing. This work will present the ARCTRON architecture, operating modes, diagnostic suite, and digital experimental workflow. Initial experimental results from the first integrated operation of the facility will be presented, including flow characterization, power limitations, and deployment of the initial diagnostic suite. Ongoing development efforts aimed at catalycity characterization, magnetic plasma control, and advanced optical diagnostics will also be discussed, illustrating how the platform supports rapid iteration from concept to experiment.

experimental diagnostics↗