Search NASA⌕ Search

SEARCH · Search NASA

Results for “Moisture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Use of midlatitude soil moisture and meteorological observations to validate soil moisture simulations with biosphere and bucket models

Soil moisture observations in sites with natural vegetation were made for several decades in the former Soviet Union at hundreds of stations. In this paper, the authors use data from six of these stations from different climatic regimes, along with ancillary meteorological and actinometric data, to demonstrate a method to validate soil moisture simulations with biosphere and bucket models. Some early and current general circulation models (GCMs) use bucket models for soil hydrology calculations. More recently, the Simple Biosphere Model (SiB) was developed to incorporate the effects of vegetation on fluxes of moisture, momentum, and energy at the earth's surface into soil hydrology models. Until now, the bucket and SiB have been verified by comparison with actual soil moisture data only on a limited basis. In this study, a Simplified SiB (SSiB) soil hydrology model and a 15-cm bucket model are forced by observed meteorological and actinometric data every 3 h for 6-yr simulations at the six stations. The model calculations of soil moisture are compared to observations of soil moisture, literally 'ground truth,' snow cover, surface albedo, and net radiation, and with each other. For three of the stations, the SSiB and 15-cm bucket models produce good simulations of seasonal cycles and interannual variations of soil moisture. For the other three stations, there are large errors in the simulations by both models. Inconsistencies in specification of field capacity may be partly responsible. There is no evidence that the SSiB simulations are superior in simulating soil moisture variations. In fact, the models are quite similar since SSiB implicitly has a bucket embedded in it. One of the main differences between the models is in the treatment of runoff due to melting snow in the spring -- SSiB incorrectly puts all the snowmelt into runoff. While producing similar soil moisture simulations, the models produce very different surface latent and sensible heat fluxes, which would have large effects on GCM simulations.

Robock, Alan↗
NASA NTRS1980

Evaluation of gravimetric ground truth soil moisture data collected for the agricultural soil moisture experiment, 1978 Colby, Kansas, aircraft mission

Soil moisture data acquired to support the development of algorithms for estimating surface soil moisture from remotely sensed backscattering of microwaves from ground surfaces are presented. Aspects of field uniformity and variability of gravimetric soil moisture measurements are discussed. Moisture distribution patterns are illustrated by frequency distributions and contour plots. Standard deviations and coefficients of variation relative to degree of wetness and agronomic features of the fields are examined. Influence of sampling depth on observed moisture content an variability are indicated. For the various sets of measurements, soil moisture values that appear as outliers are flagged. The distribution and legal descriptions of the test fields are included along with examinations of soil types, agronomic features, and sampling plan. Bulk density data for experimental fields are appended, should analyses involving volumetric moisture content be of interest to the users of data in this report.

Arya, L. M.↗
DOE OSTI2026

Cyclic moisture reactivation of calcium sorbents for long duration thermochemical energy storage

The transition to a flexible and reliable energy infrastructure, using electro-thermal energy generation technologies such as geothermal, concentrated solar power, and nuclear, usually demands simultaneous advancement of thermal energy storage (TES) to support on-demand electricity generation and industrial applications while mitigating the inherent intermittency of renewable energy sources and power outages from direct energy generation. Among TES technologies, thermochemical energy storage (TCES) based on calcium looping emerges as a compelling high-power energy storage candidate due to its high reaction enthalpy, compatibility with elevated operating temperatures, and abundance of low-cost materials. However, the long-term durability of calcium-based sorbents for TCES is hindered by surface sintering and particle aggregation, leading to performance degradation over repeated thermal cycles. This study explores a moisture hydration-based strategy to regenerate a degraded calcium sorbent and mitigate performance degradation for long duration TCES. The addition of moisture transforms calcium oxide into calcium hydroxide and produces intercalation water layers, associated with a regenerated surface area and reduced calcium oxide crystallite size. Both these effects are beneficial in restoring the sorbents' reactivity for carbonization. Additionally, an optimized hydration-assisted reactivation protocol balances the recovered energy storage capacity with heating penalty required for moisture removal from hydrated samples, resulting in an enhanced energy storage capacity up to 176% compared to benchmark sorbents that undergo cycling without reactivation after 60 cycles. In conclusion, these results highlight the potential of hydration-assisted reactivation to enhance the long-term performance of TCES, providing an effective pathway to advancing electro-thermal storage technologies.

36 MATERIALS SCIENCE↗
NASA NTRS1973

Detection of moisture and moisture related phenomena from Skylab

The author has identified the following significant results. This is a preliminary report on the ability to detect soil moisture variation from the two different sensors on board Skylab. Initial investigations of S190A and Sl94 Skylab data and ground truth has indicated the following significant results. (1) There was a decrease in Sl94 antenna temperature from NW to SE across the Texas test site. (2) Soil moisture increases were measured from NW to SE across the test site. (3) There was a general increase in precipitation distribution and radar echoes from NW to SE across the site for the few days prior to measurements. This was consistent with the soil moisture measurements and gives more complete coverage of the site. (4) There are distinct variations in soil textures over the test site. This affects the moisture holding capacity of soils and must be considered. (5) Strong correlation coefficients were obtained between S194 antenna temperature and soil moisutre content. As the antenna temperature decreases soil moisture increases. (6) The Sl94 antenna temperature correlated best with soil mositure content in the upper two inches of the soil. A correlation coefficient of .988 was obtained. (7) Sl90A photographs in the red-infrared region were shown to be useful for identification of Abilene clay loam and for determining the distribution of this soil type.

Eagleman, J. R.↗
NASA NTRS1974

Detection of moisture and moisture related phenomena from Skylab

The author had identified the following significant results. Soil moisture and precipitation variations were not detectable as tonal variations on the S19OA IR B and W photography. Some light tonal areas contained high precipitation .83 inches and high moisture content 21.1% while other light tonal areas contained only .02 inches precipitation and as little as 0.7% moisture. Similar variations were observed in dark tonal areas. This inconsistency may be caused by a lapse of 3 to 4 days from the time precipitation occurred until the photographs were taken and the fact that in the first inch of soil the measured soil moisture was generally less than 5.0%. For overall tonal contrast, the aerial color, color IR and aerial B and W appear to be the best. Cities stand out from the landscape best in the aerial color and color IR, however, to see major street patterns a combination of the two aerial B and W bands and the two IR B and W bands may be desirable. For mapping roads it is best use all 6 bands. For lake detection, the IR B and W bands would be the best but for streams the aerial B and W band would be better. The aerial color, color IR, and the two IR B and W bands are best for distinguishing cultivated and non-cultivated areas, whereas the two aerial B and W bands are better for seeing local relief. Clouds may be best seen in the aerial color and color IR bands.

Eagleman, J. R.↗
NASA NTRS1980

Plan of research for integrated soil moisture studies. Recommendations of the Soil Moisture Working Group

Soil moisture information is a potentially powerful tool for applications in agriculture, water resources, and climate. At present, it is difficult for users of this information to clearly define their needs in terms of accuracy, resolution and frequency because of the current sparsity of data. A plan is described for defining and conducting an integrated and coordinated research effort to develop and refine remote sensing techniques which will determine spatial and temporal variations of soil moisture and to utilize soil moisture information in support of agricultural, water resources, and climate applications. The soil moisture requirements of these three different application areas were reviewed in relation to each other so that one plan covering the three areas could be formulated. Four subgroups were established to write and compile the plan, namely models, ground-based studies, aircraft experiments, and spacecraft missions.

Source record↗
NASA NTRS1994

Superconducting YBa2Cu3O7 Powder: Reduction of Carbon, Moisture, and Impurity Phase Concentrations in Commercial Powders and the Reactivity with Moisture and Carbon Dioxide

The purpose of this study was to determine the experimental parameters under which commercially pure YBa2Cu3O7 (1237) powders would be converted into a single phase (1237) powder only. Carbon (present as carbonate) and impurity phase concentrations in the (1237) powder are very dependent upon the firing temperatures, heat-treating temperatures and times, and atmosphere, while the moisture concentration is not. YBa2Cu3O7 powder with about 0.03 wt/%, carbon, 0.03 wt% moisture, and low impurity phase concentrations was obtained. Moisture and carbon concentrations in heat-treated powders did not increase significantly after 48 and 72 h of exposure to air, respectively, and after 144 h of exposure they were less than 0.26 and 0.08 wt/%, respectively. The (1237) powder first reacts with moisture and then hydroxide reacts with CO2. Firing the as received powders in air led to the decomposition of the superconducting (1237) phase.

Stecura, Stephan↗
NASA NTRS1986

Moisture transports and budgets of 'moisture bursts'

The paper discusses moisture fluxes and budgets associated with a pair of 'moisture bursts' in the eastern North Pacific Ocean area, described by Smith et al. (1985). The moisture fluxes were calculated using data obtained during the first Special Observing Period (SOP-1) of the FGGE. The area specifically examined extended from the equator to the latitude 20 deg N and from longitude 180 deg to 100 deg W, with concentration on the region south and southeast of the Hawaiian Islands. From the comparison of the calculations based on dropwindsonde and radiosonde data and reports from commercial and military aircraft, it is concluded that the calculations of water vapor flow across latitude lines probably provide a fair representation of reality, especially when based on the dropwindsonde data. However, water vapor flow out of small volumes is not well represented by the results from either data.

Thompson, A. H.↗
NASA NTRS1992

An overview of the measurements of soil moisture and modeling of moisture flux in FIFE

Measurements of soil moisture and calculations of moisture transfer in the soil medium and at the air-soil interface were performed over a 15-km by 15-km test site during FIFE in 1987 and 1989. The measurements included intensive soil moisture sampling at the ground level and surveys at aircraft altitudes by several passive and active microwave sensors as well as a gamma radiation device.

Wang, J. R.↗
DOE OSTI2026

Observed Temperature and Moisture Advection Characteristics in the Southern Great Plains

Until recently, advection profiles in the planetary boundary layer have been difficult to quantify from observations. As a result, not much is known about its basic characteristics, like magnitude and diurnal cycles, or how these differ as a function of large-scale environments. Here, to provide insight into advective characteristics, a Green’s Theorem–based method for calculating profiles of advection in the lowest 3 km from an array of ground-based thermodynamic and kinematic profiling instruments has been applied to 2 years of observations from the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observing site. Since advection largely depends on synoptic-scale forcing, a self-organizing map (SOM) was used to classify days based on mean sea level pressure analyses; from that, the diurnal evolution of vertical profiles of advection for different synoptic environments was quantified. The overall mean magnitude of the potential temperature advection is approximately ±3 K h −1 , while the moisture advection is approximately ±1.5 g kg −1 h −1 , with substantial variability in the sign and magnitude of the advective tendencies at different heights and throughout the diurnal cycle. Advection magnitude is strongly connected to the strength of synoptic-scale forcing, which varies depending on the time of year. Variability in advection is larger for potential temperature than it is for moisture, and strongly forced environments, like midlatitude cyclones, feature greater variability in the advection magnitude than weakly forced or quiescent environments.

advection↗
NASA NTRS1973

Detection of moisture and moisture related phenomena from Skylab

The author has identified the following significant results. Correlations between the S-194 antenna temperature and soil moisture have been obtained for three sets of data; one for Skylab 2 and two for Skylab 3. The best correlations were obtained for the surface to one inch depth in two cases and for the surface to two inches for the third case. Correlation coefficients for the surface to one inch depth were -0.98, -0.95, and -0.82. The lowest correlation coefficient was obtained with total soil moisture variations less than 4% across the test site.

Eagleman, J. R.↗
NASA NTRS1974

Detection of moisture and moisture related phenomena from Skylab

The author has identified the following significant results. Skylab 2 data for June 5, 1973 (Texas site) relates favorably with previously calculated aircraft data when correlating brightness temperature to soil moisture. However, more detailed work is needed to determine the corrected surface temperature. In addition, correlations between the S194 antenna temperature and soil moisture have been obtained for five sets of Skylab data. The best correlations were obtained for the surface to one inch depth in four cases and for surface to two inches depth for the fifth case. Correlation coefficients for the surface to one inch depth were -0.98, -0.95, -0.90, -0.82, and -0.80.

Eagleman, J. R.↗
NASA NTRS1974

Detection of moisture and moisture related phenomena from Skylab

The author has identified the following significant results. Data from five Skylab passes were combined to give a composite relationship between the S194 antennae temperature and soil moisture content in the surface to one inch layer. The five data sets were comparable and resulted in a correlation coefficient of -0.97. The regression equation was used to predict soil moisture content across the United States for one particular pass on August 5, 1973.

Eagleman, J. R.↗
NASA NTRS1985

Moisture-temperature degradation in module encapsulants: The general problem of moisture in photovoltaic encapsulants

A general research approach was outlined toward understanding water-module interactions and the influence of temperature involving the need to: quantify module performance loss versus level of accumulated degradation, establish the dependence of the degradation reaction rate on module moisture and temperature levels, and determine module moisture and temperature levels in field environments. These elements were illustrated with examples drawn from studies of the now relatively well understood module electrochemical degradation process. Research data presented include temperature and humidity-dependent equilibrium leakage current values for multiparameter module material and design configurations. The contributions of surface, volume, and interfacial conductivities was demonstrated. Research directions were suggested to more fully understand the contributions to overall module conductivity of surface, volume, and interfacial conductivities over ranges of temperature and relative humidity characteristic of field environments.

Mon, G. R.↗
NASA NTRS1974

Detection of moisture and moisture related phenomena from Skylab

The author has identified the following significant results. The high correlations between radiometric temperature and soil moisture content are shown to remain quite high for independent footprints of the S194 sensor. Since an analysis based on overlapping footprints had previously been reported with a high correlation, it was necessary to verify that the correlation did not arise from dependent data.

Eagleman, J. R.↗
NASA NTRS1977

Moisture convergence from a combined mesoscale moisture analysis and wind field for 24 April 1975

Precipitable water values inferred from the Vertical Temperature Profile Radiometer data of the polar orbiting NOAA-4 satellite are used in conjunction with wind-field analyses obtained from Synchronous Meteorological Satellite visible-channel data to study the moisture convergence in the boundary layer immediately preceding a storm. This combination of data simulates the information that will be available from the Visible and Infrared Spin-Scan Radiometer on board the GOES-D satellite, which is scheduled to begin operation in the 1980s. Serviceable representations of boundary layer flow are developed through analysis of the satellite infrared cumulus velocities, although the flow representations are not exactly located in the vertical.

Negri, A. J.↗