SEARCH · Search NASA
Results for “Mt. Simon”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Geology of The Mt. Simon Sandstone Storage Complex at the Wabash #1 Well, Vigo Co., Indiana (Subtask 7.2, Technical Report)
The Wabash CarbonSAFE project drilled the Wabash #1 stratigraphic test well (ID# 168045) at the Wabash Valley Resources (WVR) IGCC facility in Vigo County, Indiana, to characterize and evaluate the basal Cambrian Mt. Simon Sandstone for commercial-scale CO 2 storage near the site. This report presents an extensive geologic characterization of the Mt. Simon storage complex and relevant data collected from the Wabash #1 well, such as lithologic data collected from cuttings and core, geophysical logging, geomechanical analysis of core samples, and well testing and fluid sampling within the Mt. Simon Sandstone. The Mt. Simon storage complex comprises two major sections: the Mt. Simon Sandstone as the potential reservoir and the overlying Eau Claire Formation as its primary seal. Within the report, an extensive depositional, sedimentological, and geochronologic characterization of the Mt. Simon is included with supportive chapters on the regional geology and the geophysical, petrophysical, and petrologic data collected during the project. An overview of 2D seismic reflection data collected from and around the test well is presented. Also presented are chapters on the characterization of the sealing Eau Claire Formation, including a chapter on the capacity of the primary and secondary seals to the Mt. Simon as well as a chapter on geomechanical testing results of the Eau Claire Formation and Mt. Simon Sandstone. Some of the information discussed in this report was used in the development of static and dynamic geologic models of the Mt. Simon Sandstone storage complex. The static and dynamic modeling of CO 2 injection in the Mt. Simon Sandstone are discussed in a separate report (Dessenberger et al., 2022) under the Wabash CarbonSAFE project.
Geocellular Model of Mt. Simon Sandstone for University of Illinois at Urbana-Champaign DDU feasibility study
The geocellular model of the Mt. Simon Sandstone was constructed for the University of Illinois at Urbana-Champaign DDU feasibility study. Starting with the initial area of review (18.0 km by 18.1 km [11.2 miles by 11.3 miles]) the boundaries of the model were trimmed down to 9.7 km by 9.7 km (6 miles by 6 miles) to ensure that the model enclosed a large enough volume so that the cones of depression of both the production and injection wells would not interact with each other, while at the same time minimizing the number of cells to model to reduce computational time. The grid-cell size was set to 61.0 m by 61.0 m (200 feet by 200 feet) for 160 nodes in the X and Y directions. Within the model, 67 layers are represented that are parameterized with their sediment/rock properties and petrophysical data. The top surface of the Mt. Simon Sandstone was provided by geologists working on the project, and the average thickness of the formation was taken from the geologic prospectus they provided. An average thickness of 762 m (2500 feet) was used for the Mt. Simon Sandstone, resulting in 60 layers for the model. Petrophysical data was taken from available rotary sidewall core data (Morrow et al., 2017). As geothermal properties (thermal conductivity, specific heat capacity) are closely related to mineralogy, specifically the percentage of quartz, available mineralogical data was assembled and used with published data of geothermal values to determine these properties (Waples and Waples, 2004; Robertson, 1988). The Mt. Simon Sandstone was divided into three separate units (lower, middle, upper) according to similar geothermal and petrophysical properties, and distributed according to available geophysical log data and prevailing interpretations of the depositional/diagenetic history (Freiburg et al. 2016). Petrophysical and geothermal properties were distributed through geostatistical means according to the associated distributions for each lithofacies. The formation temperature was calculated, based on data from continuous temperature geophysical log from a deep well drilled into the Precambrian basement at the nearby Illinois Basin Decatur Project (IBDP) where CO2 is currently being sequestered (Schlumberger, 2012). Salinity values used in the model were taken from regional studies of brine chemistry in the Mt. Simon Sandstone, including for the IBDP (e.g., Panno et al. 2018). After being reviewed by the project's geologists, the model was then passed onto the geological engineers to begin simulations of the geothermal reservoir and wellbores.
Illitization in the Mt. Simon Sandstone, Illinois Basin, USA: Implications for carbon dioxide storage
Clay mineral cementation is one of the most important controls on sandstone reservoir properties. Here, in this paper, the diagenetic history of the Mt. Simon reservoir complex is studied to reveal the origin, timing, and controls of illitization. Samples of sandstone and shale from Mt. Simon reservoir complex were acquired from the Illinois Basin–Decatur Project (IBDP), a CO 2 storage demonstration project in the central Illinois Basin. Petrographic, SEM, TEM, XRD analyses and K/Ar age dating were completed to identify the major detrital and diagenetic components of the samples and reveal illite to be the major clay component in all samples. Illitic clay coatings in the lower Mt. Simon reservoir are identified as a major control on reservoir properties by inhibiting major precipitation of authigenic quartz during illitization, resulting in highly permeable sandstone, essential for CO 2 storage. The coating box-work morphology and mineralogy are indicative of a detrital smectite origin with subsequent illite growth associated with feldspar dissolution and kaolinite alteration. The mineralogy of bulk material and separate grain size fractions (2–0.6 μm; 0.6–0.2 μm; < 0.2 μm) with illite polytypes 2M 1 , 1M, and 1M d were quantified and age dated via 40 K- 40 Ar methods. The shales or reservoir seals contain the highest proportions of detrital illite with illite in the lower Mt. Simon Sandstone reservoir identified as solely diagenetic. Two major events of illitization are identified throughout the Mt. Simon with more porous reservoir rock exhibiting the older event from approximately 360 to 315 Ma and tighter sandstone units with reservoir properties too low to be considered reservoir exhibiting illite dates from 250 to 220 Ma. This partitioning of illitization is attributed to varied mineralogy controlled by depositional changes and evolution of the greater basin.
Multi-Scale 3D Imaging for Machine Learning Property Upscaling: Mt. Simon Sandstone Case Study
Petrographic properties of principal target reservoirs for carbon sequestration, such as the Mt. Simon Sandstone, are relevant to broad interest groups. The Mt. Simon Sandstone is a deep, saline, regionally extensive Cambrian sandstone, overlain by low permeability sealing formations, making it one of the viable geologic carbon storage reservoirs in the Midwestern US. Its thickness (exceeding 2400 ft in some localities), depth, and lateral extent, combined with high porosity and permeability make it a high-priority target of multiple ongoing geologic carbon sequestration efforts in the United States of America. The National Energy Technology Laboratory in Morgantown, West Virginia, has been engaged in characterization efforts of the Mt. Simon for over a decade, with a strong focus on Computed Tomographic data acquisition. Data generated during this period has been hitherto not accessible to the public. This archival effort focused on preservation of historical CT data and associated metadata, and facilitating their accessibility, culminating with the publication of the entire dataset on NETL’s Energy Data eXchange (EDX) and the associated Gill et. al (2024) paper.
Impact of Brine/CO 2 exposure on the transport and mechanical properties of the Mt Simon sandstone
When sandstone rocks are exposed to CO 2 -saturated brine, their transport and mechanical properties can change due to brine/CO 2 -induced chemical reactions. The present study investigates the change in the flow-through characteristics, porosity, and the mechanical behavior of Mt. Simon Sandstone samples caused by exposure to brine/CO 2 . The cores, extracted from a depth interval of 2110.4–2111.4 m (6924–6927 ft) in the Mt. Simon formation, were first characterized for their mechanical and transport properties, and then aged in CO 2 -saturated brine at pressures of 17.24 MPa (2500 psi) and temperature of 50°C for one to two weeks. Following that, the changes in the transport and mechanical properties of the samples were analyzed using He pycnometry, flow perporometry and triaxial testing. Our experiments show that the porosity of the Mt. Simon samples slightly increases after exposure to CO 2 /brine, while the permeability increases more substantially depending on the stress state. Measurements of the flow-through pore size distribution (PSD) are indicative of the changes occurring and are consistent with the observed increases in permeability. Nitrogen adsorption tests (BET), before and after incubation, show a significant loss of pore volume in the mesoporous range that is indicative of clay dissolution. Weakening of the materials was observed based on the mechanical properties studied, a result that is consistent with the observed dissolution of clays that play a central role in the cementation of the quartz grains. Finally, the analysis of the brine compositions reveals an increase in concentration of most cations after incubation with the Mt. Simon cores. This is also consistent with mineral/clay dissolution, confirmed by the porosity, transport, and mechanical property measurements as well as electron microscopy analysis of the same samples.
Mt. Simon Sandstone - High Resolution CT
High resolution micro-computed tomography images of sandstone from the Mt. Simon formation at different depths. These images provide an insight into the pore structure of the Mt. Simon sandstone (e.g. for potential CO2 storage). This data set can be used to further study the formation as a whole..
Impact of exposure to brine/CO 2 on the mechanical and transport properties of the Mt. Simon Sandstone
When sandstone rocks are exposed to CO 2 -saturated brine, their transport and mechanical properties can, potentially, change due to chemical reactions as a result of such exposure. This paper investigates changes in the flow-through characteristics, porosity, and the mechanical properties of Mt. Simon Sandstone samples caused by such exposure to brine/CO 2 . A core, extracted from the Mt. Simon formation, was first characterized for its porosity and relevant transport properties, and it was then aged for over 500 hr in CO 2 -saturated brine at formation-relevant pressure, temperature, and confining stress conditions. The deformation of the sample was measured in situ during aging via strain gauges attached to the core's surface. Following the aging experiment, the sample's porosity and transport properties were again analyzed. Our experiments show that both the porosity and permeability of the Mt. Simon sandstone sample increase due to exposure to brine/CO 2 , with the impact on permeability being more significant. The deformation measurements employing strain gauges indicate a weakening of the core material. Analysis of the composition of the brine at the conclusion of the testing reveals changes, specifically, an increase in the concentration of several of the cations. These changes are indicative of mineral/clay dissolution, consistent with the porosity, permeability, and strain gauge measurements.
Influence of geochemical reactions on the creep behavior of Mt. Simon sandstone
The capture and subsurface storage of carbon dioxide is a sustainable option that is currently pursued worldwide to mitigate greenhouse gas effect. However, predicting the long-term mechanical integrity of CO 2 underground storage systems remains a challenge. To address that question, it is essential to understand the influence of fluid-rock chemo-mechanical interactions on the long-term and on the time-dependent mechanical properties. In turn, the long-term mechanical response and the time-dependent mechanical behavior can be represented by the creep response. We investigate the impact of CO 2 -induced geochemical reaction on the creep response of Mt. Simon sandstone with a 50–400 micron grain size. We perform static and dynamic flow experiments on Mt. Simon sandstone specimens under geological conditions, at a temperature of T = 50 - 53 °C and for CO 2 pressures of P = 8:62; 17:2 MPa under both static flow and dynamic flow-through conditions. After aging, we employ creep indentation testing, high-resolution SEM-EDS, computer vision, machine learning, and micromechanics modeling to probe changes on the microstructure and mechanical properties. Following both static and dynamic flow-through experiments, we observe a 10–22% decrease in quartz volume fraction and an increase in both the microporosity (7–28%) and nanoporosity (60–65%). Additional CO 2 -induced microstructural changes include an enlargement of pore throats and the formation of channels. These observations point to the presence of CO 2 -induced K-feldspar dissolution and clay dissolution reactions. Here, the macroscopic creep behavior is logarithmic and the macroscopic creep modulus varies depending on the microporosity and the relative quartz and feldspar content. As a result of these geochemical reactions and of the related microstructural changes, a 55-60% decrease in the macroscopic logarithmic creep modulus is predicted.
CO2 Capture from Biofuels Production and Storage into the Mt Simon Sandstone
Advanced carbon capture and storage (CCS) technologies offer significant potential for reducing anthropogenic carbon dioxide (CO2) emissions, while minimizing the cost of employing these technologies. Under the Industrial Carbon Capture and Storage (ICCS) Program, the U.S. Department of Energy (DOE) collaborated with industry in cost-sharing arrangements to demonstrate technologies that captured CO2 emissions from industrial sources and either stored or beneficially re-use them. The technologies included in the ICCS program progressed beyond the research and development stage to a scale that can be deployed into commercial practice within the industry. The Illinois Industrial Carbon Capture and Storage (IL-ICCS) project sought to demonstrate the ability of the Mt. Simon Sandstone to accept and retain industrial-scale volumes of carbon dioxide (CO2) from an anthropogenic source for permanent geologic sequestration. The project was a collaboration of Archer Daniels Midland (ADM) Company, the Illinois State Geological Survey (ISGS), Schlumberger Carbon Services (SCS), and Richland Community College (RCC), and had average annual injection rate of between 1,500 and 2,400 metric tons per day (MTPD) or 0.5 to 0.7 million metric tons (MMT) annually. The project site is in Decatur, Illinois on the property of ADM and RCC (Fig 1) and is directly adjacent to the Illinois Basin – Decatur Project (IBDP), a large scale pilot project of the Midwest Geological Sequestration Consortium (MGSC), which collected and injected CO2 from the ADM fuel ethanol production unit, where high purity biogenic CO2 is produced during the anaerobic fermentation of sugars to alcohol. The IL-ICCS project had an operational period of approximately six (6) years, in which 3.5 MMT of CO2 was captured, compressed, injected, and permanently stored in the Mt Simon Sandstone.
CO 2 –Brine Contact Angle Measurements on Navajo, Nugget, Bentheimer, Bandera Brown, Berea, and Mt. Simon Sandstones
In this study, contact angles were measured for CO 2 bubbles on six different sandstones (Navajo, Nugget, Bentheimer, Bandera Brown, Berea, and Mt. Simon) that could potentially represent properties of CO 2 storage depositional environments. The impacts of pressure and temperature were studied by focusing on the CO 2 phase behavior in three different scenarios: gaseous, liquid, and supercritical conditions. Despite controlling the sample preparation and cleanliness, CO 2 -brine equilibration conditions, and pressure and temperature, there were inconsistencies in contact angle trends that could largely be attributed to natural sample heterogeneity resulting from localized variations in topography, surface roughness, and mineral composition across the surface. Despite these variations, the analysis of 298 measurements from this study showed that 81% of the contact angles were below 40° representing strongly water-wet to (moderately) water-wet behaviors. Also, 17.3% of the measurements were between 40° and 60° (weakly water-wet) and primarily belonged to small CO 2 bubbles (< 500 μm) that were heavily impacted by localized surface heterogeneity in natural sandstone samples. Additionally, only 1.7% of the measurements had angles greater than 60° and could be classified as CO 2 -wet behavior, but these measurements occurred on extremely small bubbles (100-200 μm) that were very dependent on localized surface heterogeneity. While some of the detailed physics of the CO 2 -brine-sandstone interface is still poorly understood, from an application standpoint, the sandstones of this study were best characterized as strongly water-wet to (moderately) water-wet.
Advanced Geomechanical Model to Predict the Impact of CO2-Induced Microstructural Alterations on the Cohesive-Frictional Behavior of Mt. Simon Sandstone
We investigated the influence of CO2-induced geochemical reactions on the cohesive-frictional properties of host rock within the context of CO2 storage in a saline aquifer and focused on the Mt. Simon sandstone. The research objective was to model geo-mechanical changes due to host rock exposure to CO2-saturated brine while accounting for heterogeneity, double-scale porosity, and granular structure. We formulated a three-level multi-scale model for host rocks. We conducted scanning electron microscopy analyses to probe the microstructure and grid nanoindentation to measure the mechanical response. We derived new nonlinear strength upscaling solutions to correlate the effective strength characteristics and the macroscopic yield surface to the micro-structure at the nano-, micro-, and meso-scales. Specifically, our theoretical model links CO2-induced microstructural alterations to a reduction in the size of the yield surface, and a drop in the value of the friction coefficient. In turn, regarding the Illinois Basin Decatur Project, the CO2-induced drop in friction coefficient is linked to an increase in the risk of fault slip and a higher probability of induced microseismicity during and after the end of CO2 underground injection operations. The theoretical model presented is essential for the geo-mechanical modeling of CO2 underground injection operations at multiple length-scales.
Comparison of lattice Boltzmann method and pore-network modeling of CO2 and brine flow in Mt Simon Sandstone
Presented by NETL at 8th International Conference on Porous Media; InterPore2016; 5/2016
Microstructure of the Mt Simon Sandstone and its interaction with simulated reservoir brine and CO2 under reservoir pressure conditions
Presented by NETL at 8th International Conference on Porous Media; InterPore2016; 5/16
Reactive alteration of a Mt. Simon Sandstone due to CO2-rich brine displacement
Not Available