Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multi-Angle Snowflake Camera”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Multi-Angle Snowflake Camera Instrument Handbook

The Multi-Angle Snowflake Camera (MASC) takes 9- to 37-micron resolution stereographic photographs of free-falling hydrometers from three angles, while simultaneously measuring their fall speed. Information about hydrometeor size, shape orientation, and aspect ratio is derived from MASC photographs. The instrument consists of three commercial cameras separated by angles of 36º. Each camera field of view is aligned to have a common single focus point about 10 cm distant from the cameras. Two near-infrared emitter pairs are aligned with the camera’s field of view within a 10-angular ring and detect hydrometeor passage, with the lower emitters configured to trigger the MASC cameras. The sensitive IR motion sensors are designed to filter out slow variations in ambient light. Fall speed is derived from successive triggers along the fall path. The camera exposure times are extremely short, in the range of 1/25,000th of a second, enabling the MASC to capture snowflake sizes ranging from 30 micrometers to 3 cm.

47 OTHER INSTRUMENTATION↗
DOE OSTI2016

Multi-Angle Snowflake Camera Value-Added Product

The Multi-Angle Snowflake Camera (MASC) addresses a need for high-resolution multi-angle imaging of hydrometeors in freefall with simultaneous measurement of fallspeed. As illustrated in Figure 1, the MASC consists of three cameras, separated by 36°, each pointing at an identical focal point approximately 10 cm away. Located immediately above each camera, a light aims directly at the center of depth of field for its corresponding camera. The focal point at which the cameras are aimed lies within a ring through which hydrometeors fall. The ring houses a system of near-infrared emitter-detector pairs, arranged in two arrays separated vertically by 32 mm. When hydrometeors pass through the lower array, they simultaneously trigger all cameras and lights. Fallspeed is calculated from the time it takes to traverse the distance between the upper and lower triggering arrays. The trigger electronics filter out ambient light fluctuations associated with varying sunlight and shadows. The microprocessor onboard the MASC controls the camera system and communicates with the personal computer (PC). The image data is sent via FireWire 800 line, and fallspeed (and camera control) is sent via a Universal Serial Bus (USB) line that relies on RS232-over-USB serial conversion. See Table 1 for specific details on the MASC located at the Oliktok Point Mobile Facility on the North Slope of Alaska. The value-added product (VAP) detailed in this documentation analyzes the raw data (Section 2.0) using Python: images rely on OpenCV image processing library and derived aggregated statistics rely on some clever averaging. See Sections 4.1 and 4.2 for more details on what variables are computed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Arctic observations and numerical simulations of surface wind effects on Multi-Angle Snowflake Camera measurements

Abstract. Ground-based measurements of frozen precipitation are heavily influenced by interactions of surface winds with gauge-shield geometry. The Multi-Angle Snowflake Camera (MASC), which photographs hydrometeors in free-fall from three different angles while simultaneously measuring their fall speed, has been used in the field at multiple midlatitude and polar locations both with and without wind shielding. Here, we present an analysis of Arctic field observations – with and without a Belfort double Alter shield – and compare the results to computational fluid dynamics (CFD) simulations of the airflow and corresponding particle trajectories around the unshielded MASC. MASC-measured fall speeds compare well with Ka-band Atmospheric Radiation Measurement (ARM) Zenith Radar (KAZR) mean Doppler velocities only when winds are light (≤5ms-1) and the MASC is shielded. MASC-measured fall speeds that do not match KAZR-measured velocities tend to fall below a threshold value that increases approximately linearly with wind speed but is generally <0.5ms-1. For those events with wind speeds ≤1.5ms-1, hydrometeors fall with an orientation angle mode of 12∘ from the horizontal plane, and large, low-density aggregates are as much as 5 times more likely to be observed. Simulations in the absence of a wind shield show a separation of flow at the upstream side of the instrument, with an upward velocity component just above the aperture, which decreases the mean particle fall speed by 55 % (74 %) for a wind speed of 5 m s−1 (10 m s−1). We conclude that accurate MASC observations of the microphysical, orientation, and fall speed characteristics of snow particles require shielding by a double wind fence and restriction of analysis to events where winds are light (≤5ms-1). Hydrometeors do not generally fall in still air, so adjustments to these properties' distributions within natural turbulence remain to be determined.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Multi-Angle Snowflake Camera b1

The b1 level data production for the Mutli-Angle Snowflake Camera contains snowflake fall speeds and the IDs of the images taken for each snowflake.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Multi-Angle Snowflake Camera, particle analysis

The c1 level data product for the Mutli-Angle Snowflake Camera contains snowflake fall speeds and particle size, among other analysis for images associated with each hydrometeor.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Multi-Angle Snowflake Camera, time bins

The c1 level data product for the Mutli-Angle Snowflake Camera contains snowflake fall speeds and particle size, among other analysis for images associated with each hydrometeor.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Snowflake Settling Speed Experiment Field Campaign Report

The goal of the Snowflake Settling Speed Experiment was to study the impacts of ambient turbulence on the average hydrometeor settling speed. The existing U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) third Mobile Facility (AMF3) deployed at Oliktok Point (OLI) on the North Slope of Alaska includes detailed measurements of air turbulence and ground-based measurements from the multi-angle snowflake camera (MASC) of hydrometeor size, type, orientation, and fallspeed. The existing MASC is surrounded by a double wind fence, which enables measurement of the terminal velocity in still air but limits the ability to study the correlation between ambient turbulence and hydrometeor fallspeed. The scientific objective of this campaign was to assess the impact of turbulence on hydrometeor fallspeed by placing a second MASC next to the DOE MASC and without a wind fence. The goal was to assess if the two instrument measured different fallspeeds as a function of ambient turbulence and winds that could be used to assess the impact of winds on MASC measurements and on hydrometeor settling speeds. The instrument used was the original University of Utah prototype built in 2011, and it was successfully deployed in November 2017. It appeared to run successfully for two weeks but then failed. Subsequent attempts by DOE Atmospheric System Research (ASR) personnel at OLI and later at Fairbanks did not find the cause of the failure and eventually the instrument was shipped back to Utah in July 2018.

North Slope of Alaska, Oliktok Point, multi-angle ↗
DOE OSTI2021

Mass and density of individual frozen hydrometeors

A new precipitation sensor, the Differential Emissivity Imaging Disdrometer (DEID), is used to provide the first continuous measurements of the mass, diameter, and density of individual hydrometeors. The DEID consists of an infrared camera pointed at a heated aluminum plate. It exploits the contrasting thermal emissivity of water and metal to determine individual particle mass by assuming that energy is conserved during the transfer of heat from the plate to the particle during evaporation. Particle density is determined from a combination of particle mass and morphology. A Multi-Angle Snowflake Camera (MASC) was deployed alongside the DEID to provide refined imagery of particle size and shape. Broad consistency is found between derived mass–diameter and density–diameter relationships and those obtained in prior studies. However, DEID measurements show a generally weaker dependence with size for hydrometeor density and a stronger dependence for aggregate snowflake mass.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Measurement and Analysis of the Microphysical Properties of Arctic Precipitation Showing Frequent Occurrence of Riming

Detailed ground-based observations of snow are scarce in remote regions, such as the Arctic. Here, Multi-Angle Snowflake Camera measurements of over 55,000 solid hydrometeors—obtained during a two-year period from August 2016 to August 2018 at Oliktok Point, Alaska—are analyzed and compared to similar measurements from an earlier experiment at Alta, Utah. In general, distributions of hydrometeor fall speed, fall orientation, aspect ratio, flatness, and complexity (i.e., riming degree) were observed to be very similar between the two locations, except that Arctic hydrometeors tended to be smaller. In total, the slope parameter defining a negative exponential of the size distribution was approximately 50% steeper in the Arctic as at Alta. Sixty-six percent of particles were observed to be rimed or moderately rimed with some suggestion that riming is favored by weak boundary layer stability. On average, the fall speed of rimed particles was not notably different from aggregates. However, graupel density and fall speed increase as cloud temperatures approach the melting point.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Shapes and Fall Orientations of Ice Particle Aggregates

Testing the often-made assumption that ice particle aggregates (snowflakes) are well represented by oblate spheroids, ellipsoid fits are applied to aggregate images. An algorithm to retrieve both the ellipsoidal parameters and the orientations of the fitted ellipsoids is applied to Multi-Angle Snowflake Camera measurements of ice particle aggregates observed in Alaska. The resulting ellipsoids have shapes closer to prolate spheroids than the oft-assumed oblate spheroids. A robust linear relationship exists between the two characteristic aspect ratios of the ellipsoids. The most probable orientation of the maximum dimension of the retrieved ellipsoids is not in the horizontal plane, and the rotational angles of the maximum dimensions in the horizontal plane are not uniform, but instead display some correlation with the wind direction at the times of the measurements. The retrieval results can be used to improve the representation of aggregates in microphysics and/or electromagnetic radiation scattering models applicable to radar and satellite measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

The Shape and Density Evolution of Snow Aggregates

Abstract Snow aggregates evolve into a variety of observed shapes and densities. Despite this diversity, models and observational studies employ fractal or Euclidean geometric measures that are assumed universal for all aggregates. This work therefore seeks to improve understanding and representation of snow aggregate geometry and its evolution by characterizing distributions of both observed and Monte Carlo–generated aggregates. Two separate datasets of best-fit ellipsoid estimates derived from Multi-Angle Snowflake Camera (MASC) observations suggest the use of a bivariate beta distribution model for capturing aggregate shapes. Product moments of this model capture shape effects to within 4% of observations. This mathematical model is used along with Monte Carlo simulated aggregates to study how combinations of monomer properties affect aggregate shape evolution. Plate aggregates of any aspect ratio produce a consistent ellipsoid shape evolution whereas thin column aggregates evolve to become more spherical. Thin column aggregates yield fractal dimensions much less than the often-assumed value of 2.0. Ellipsoid densities and fractal analogs of density (lacunarity) are much more variable depending on combinations of monomer size and shape. Simple mathematical scaling relationships can explain the persistent triaxial ellipsoid shapes that appear in both observed and modeled aggregates. Overall, both simulations and observations prove aggregates are rarely oblate. Therefore, the use of the proposed bivariate ellipsoid distribution in models will allow for similar-sized aggregates to exhibit a realistic dispersion of masses and fall speeds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Parameterization of arctic hydrometeor physics using new precipitation measurement technologies: Final Report

Predictions of precipitation are highly sensitive to the accuracy of parameterized growth and sedimentation processes, especially in remote regions such as the Arctic where observations are scarce. The goal of this study was to combine measurements of meteorological conditions and retrievals from passive and active remote sensors to provide refined parameterizations of precipitation properties and processes with a particular focus on the Arctic. To accomplish the project goals, new instrumentation was used from the Oliktok Point Mobile Facility and the Utqiagvik (Barrow) North Slope of Alaska ARM site focusing in particular on Multi-Angle Snowflake Camera (MASC) data. The MASC is the first device able to automatically photograph precipitation particles in free-fall from multiple angles while simultaneously measuring their fall speed. The MASC installed at the ARM Oliktok Point and Utqiagvik facilities was used to examine the nature of Arctic precipitation, taking particular advantage of the unique suite of precipitation, meteorological, and remote sensing instrumentation that is available at the high latitude sites. Combined with radiometer data we were able to explore the relationship between precipitation particle characteristics and the clouds where the snow is created. Ground-based wind measurements provided detailed data on turbulence. Further theoretical work explored the physical mechanisms controlling precipitation size distributions, the physics determining hydrometeor fallspeed, and the existence of general solutions to the Navier-Stokes equations for falling particles. Outreach work introduced hydrometeor classification to classrooms across the United States.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

A variational technique to estimate snowfall rate from coincident radar, snowflake, and fall-speed observations

Estimates of snowfall rate as derived from radar reflectivities alone are non-unique. Different combinations of snowflake microphysical properties and particle fall speeds can conspire to produce nearly identical snowfall rates for given radar reflectivity signatures. Such ambiguities can result in retrieval uncertainties on the order of 100–200 % for individual events. Here, we use observations of particle size distribution (PSD), fall speed, and snowflake habit from the Multi-Angle Snowflake Camera (MASC) to constrain estimates of snowfall derived from Ka-band ARM zenith radar (KAZR) measurements at the Atmospheric Radiation Measurement (ARM) North Slope Alaska (NSA) Climate Research Facility site at Barrow. MASC measurements of microphysical properties with uncertainties are introduced into a modified form of the optimal-estimation CloudSat snowfall algorithm (2C-SNOW-PROFILE) via the a priori guess and variance terms. Use of the MASC fall speed, MASC PSD, and CloudSat snow particle model as base assumptions resulted in retrieved total accumulations with a −18 % difference relative to nearby National Weather Service (NWS) observations over five snow events. The average error was 36 % for the individual events. Use of different but reasonable combinations of retrieval assumptions resulted in estimated snowfall accumulations with differences ranging from −64 to +122 % for the same storm events. Retrieved snowfall rates were particularly sensitive to assumed fall speed and habit, suggesting that in situ measurements can help to constrain key snowfall retrieval uncertainties. More accurate knowledge of these properties dependent upon location and meteorological conditions should help refine and improve ground- and space-based radar estimates of snowfall.

54 ENVIRONMENTAL SCIENCES↗