Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multi-component”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Mathematical model for two-dimensional multi-component airfoils in viscous flow.

A computerized analytical model of a multi-component airfoil in viscous, subsonic flow has been developed. The model, representing attached flow, defines viscous pressure distributions, lift, moments, and local boundary-layer properties on each element of an arbitrarily arranged slotted airfoil. The final viscous solution is obtained by an iterative technique for successively combining an inviscid solution with boundary-layer displacement thicknesses. Ordinary boundary-layers include laminar, transition, and turbulent types. A significant feature of the program is an analytical model representing the merging of the upper surface boundary layer with the slot efflux. Typical correlations with experiment are provided and program applications are discussed.

Stevens, W. A.↗

One- and multi-component models of the upper photosphere based on molecular spectra. I - The violet system of CN /0, 0/

Spectroheliograms taken in the CN (0, 0) violet band near 3883 A show very small scale network and cell structures with high contrast. The bandhead itself, which is a broad feature due to overlap of several CN lines, allows the diagnostic simplicity of a continuum since motions, magnetic fields, and broadening mechanisms are unimportant. We have obtained spectroheliograms in the bandhead and center-to-limb photoelectric spectra of CN (0, 0) at Kitt Peak National Observatory. From the photoelectric spectra and a detailed analysis of the formation of the CN (0, 0) spectrum we derive a best-fit one-component upper photospheric model differing from that of the HSRA and recommend a change in solar carbon abundance from the HSRA value.

Mount, G. H.↗

Forced vibrations of multi-component compliant tanks and feedlines

An analytical and experimental research program was performed to investigate the effects of flexible tanks and lines and the total system dynamic response of a simple physical system which had some of the essential features of a liquid-fueled launch vehicle. Several vessel-wall materials were used to obtain a range of elastic moduli. Water was used to simulate the fuel and an electromagnetic shaker provided external excitation such as might originate from a rocket-propulsion system. Experimental data were compared to values obtained from mathematical models for the many degree-of-freedom lumped-mass representation.

Smith, H. W.↗

Prediction of electron density in the boundary layer on entry vehicles with ablation

A rather general computer code has been developed for the numerical solution of the laminar boundary layer and thin shock layer (stagnation point only) equations for a multi-component gas mixture with finite reaction rates. The purpose of this paper is to indicate the capabilities of this computer program by presenting solutions for pure air flows and flows with carbon ablation. At the body surface the effects of oxidation and sublimation of carbon are taken into account with the following species included in the gas model: 0 2 , N 2 , O, N, NO, NO + , C 1 , C 2 , C 3 , CN, CO, and CO 2 . Results for the boundary layer along a 10° half-angle hyperboloid with ablation of carbon are compared to pure air results. Shock layer results for several wall temperatures and altitudes are presented and compared to pure air results. Other types of problems that can be solved with this computer code are indicated.

F. G. Blottner↗

Theoretical and experimental study of a new method for prediction of profile drag of airfoil sections

Theoretical and experimental studies are described which were conducted for the purpose of developing a new generalized method for the prediction of profile drag of single component airfoil sections with sharp trailing edges. This method aims at solution for the flow in the wake from the airfoil trailing edge to the large distance in the downstream direction; the profile drag of the given airfoil section can then easily be obtained from the momentum balance once the shape of velocity profile at a large distance from the airfoil trailing edge has been computed. Computer program subroutines have been developed for the computation of the profile drag and flow in the airfoil wake on CDC6600 computer. The required inputs to the computer program consist of free stream conditions and the characteristics of the boundary layers at the airfoil trailing edge or at the point of incipient separation in the neighborhood of airfoil trailing edge. The method described is quite generalized and hence can be extended to the solution of the profile drag for multi-component airfoil sections.

Goradia, S. H.↗

Neutral composition gravity waves in the thermosphere observed by ESRO 4

Neutral composition waves with a wave length of about 5000 km and a wave period of about 2.5 hours were observed by ESRO 4 in the altitude region of 250 km. The amplitudes are of the order of 25 percent for Ar, 15 percent for N2, and roughly 10 percent for He and O at 25 percent geographic latitude. The wave amplitudes are seen to decrease towards lower latitudes suggesting that the composition waves are launched by auroral sources. Simultaneous ground based ionosonde measurements of the F2 layer critical frequency at mid and low latitudes show a wave period consistent with the satellite observations. The theoretical investigation with a multi-component model shows that diffusion plays a major role in explaining these wave phenomena. The phase and amplitude relation between atmospheric constituents are sensitive to the altitude region in which energy is deposited thus suggesting that Joule heating or soft particle precipitation are the predominant energy sources.

Trinks, H.↗

Iron line emission from a high temperature plasma in Cas A

The X-ray spectrum of Cassiopeia A was observed for several days by the proportional counter experiment on board OSO-8. The high energy ( 5 keV) data are fit well by a thermal spectrum. A narrow iron line which is predicted by the thermal model is also observed. The low energy (2-5 keV) data show an excess over the high temperature component which is consistent with the presence of an additional low temperature thermal component. Iron abundance in the source relative to normal cosmic abundance is discussed, as in the relation of this observation to shock wave and multi-component thermal models for supernova remnants.

Pravdo, S. H.↗

Viscous/potential flow about multi-element two-dimensional and infinite-span swept wings: Theory and experiment

The viscous subsonic flow past two-dimensional and infinite-span swept multi-component airfoils is studied theoretically and experimentally. The computerized analysis is based on iteratively coupled boundary layer and potential flow analysis. The method, which is restricted to flows with only slight separation, gives surface pressure distribution, chordwise and spanwise boundary layer characteristics, lift, drag, and pitching moment for airfoil configurations with up to four elements. Merging confluent boundary layers are treated. Theoretical predictions are compared with an exact theoretical potential flow solution and with experimental measures made in the Ames 40- by 80-Foot Wind Tunnel for both two-dimensional and infinite-span swept wing configurations. Section lift characteristics are accurately predicted for zero and moderate sweep angles where flow separation effects are negligible.

Olson, L. E.↗

Viscous/potential flow about multi-element two-dimensional and infinite-span swept wings - Theory and experiment

The viscous subsonic flow past two-dimensional and infinite-span swept multi-component airfoils is studied theoretically and experimentally. The computerized analysis is based on iteratively coupled boundary-layer and potential-flow analysis. The method, which is restricted to flows with only slight separation, gives surface pressure distribution, chordwise and spanwise boundary-layer characteristics, lift, drag, and pitching moment for airfoil configurations with up to four elements. Merging confluent boundary layers are treated. Theoretical predictions are compared with an exact theoretical potential flow solution and with experimental measures made in the Ames 40- by 80-Foot Wind Tunnel for both two-dimensional and infinite-span swept wing configurations. Section lift characteristics are accurately predicted for zero and moderate sweep angles where flow separation effects are negligible.

Olson, L. E.↗

Crystal growth from the vapour phase (ASTP experiment MA-085)

The positive effects of microgravity on crystal quality and fundamental properties of the vapor transport reaction were established by analyzing the results of three transport experiments on multi-component systems performed during the Apollo Soyuz Test Project (ASTP) mission. The systems employed were GeSe(0.99)Te(0.01) - GeI4 (A), GeS(0.98)Se(0.02) - GeCl4 (B), and GeS - GeCl4-Ar (C). The crystallographic analysis is based on a direct comparison of space and ground-based (prototype) crystals, employing X-ray diffraction, microprobe, microscopic, and chemical etching techniques. The results demonstrate a considerable improvement of the space-grown crystals in terms of chemical and crystalline homogeneity, surface morphology, and bulk perfection relative to ground specimens. The confirmation of greater mass transport rates than predicted for micro-gravity by present vapor transport models is of basic scientific and practical importance for the improvement of transport models and techniques on earth and for the development of a transport model for space conditions. The internal consistency and agreement between ASTP and Skylab results obtained for different compounds, transport agents, and temperature gradients strongly support the validity of these observations. The combined findings of improved crystal quality and high mass transport rates are of technological significance for space-processing applications.

Wiedemeier, H.↗