Laser-assisted nanofabrication of multielement complex oxide core–shell nanoparticles
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Search NASA
Results for “Multielement oxide”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Irreversible Multielement Diffusion and the Resulting Compositional and Processing Flexibility in the Synthesis and Densification of Lithium Aluminum Lanthanum Zirconium Oxide
Despite the broad interest in Al-doped lithium lanthanum zirconium oxide (LLZO), the wide range of reported ionic conductivities suggests that the effect of processing parameters on the resulting phase purity and bulk conductivity is not well-understood. Here, in this work, we synthesized six separate series of LLZO with variations in Al concentration, Li excess, Li addition order, Li source, densification method, and mother powder to determine the effect on the composition, phase purity, density, and bulk conductivity. We found that a wider range of compositions (6.08–7.61 mol of Li and 0.06–0.23 mol of Al) than previously reported can result in cubic phase stability and that nearly all elements (Li, Al, Zr, and La) are lost to the MgO crucible during calcination and sintering. The manner in which different elements are lost is affected by the processing parameters. We observed that Al-doped LLZO shows great compositional flexibility in stabilizing the cubic phase, offering an explanation for the range of electrochemical performance metrics reported in the literature.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Probing Dopant Redistribution, Phase Propagation, and Local Chemical Changes in the Synthesis of Layered Oxide Battery Cathodes
Achieving the targeted control of layered oxide properties calls for more fundamental studies to mechanistically probe their evolution during their synthesis. Herein, dopant distribution, phase propagation, and local chemical changes as well as their interplay in multielement-doped LiNiO 2 materials are investigated using spectroscopic, imaging, and scattering techniques. It is shown that dopants undergo dynamic redistribution in the Ni(OH) 2 host lattice at the early stage of calcination (below 300 °C). Such redistribution behavior exhibits strong dopant-dependent characteristics, allowing for targeted surface and bulk doping control. The Ni oxidation process exhibits depth-dependent characteristics and the most rapid Ni oxidation takes place between 300 and 700 °C. Using Ni oxidation state as the proxy for the phase transformation, the buildup of heterogenous phase propagation in the early stage of calcination is shown, especially along the radial direction of secondary particles. Furthermore, the radial heterogenous phase distribution gradually decreases upon completing the calcination. However, a high degree of mosaic-like heterogeneity may still be present in the final product, departing from the perfect layered oxide. Overall, the present study offers fundamental insights into manipulating multiscale materials properties during calcination for obtaining stable, high-energy layered oxide cathodes.
36 MATERIALS SCIENCE↗
Understanding the Stability of Manganese Chromium Antimonate Electrocatalysts through Multimodal In Situ and Operando Measurements
Herein, we utilize an on-line electrochemical flow cell coupled with an inductively coupled plasma-mass spectrometer (ICP-MS) to characterize the impact of composition and reactant gas on the multielement dissolution of Mn(-Cr)-Sb-O electrocatalysts. Compared to Mn 2 O 3 and Cr 2 O 3 oxides, we find that the antimonate framework stabilizes Mn at OER potentials and Cr at both ORR and OER potentials. Furthermore, dissolution of Mn and Cr from Mn(-Cr)-Sb-O is found to be driven by ORR reaction rate, with minimal dissolution under N 2 . We observe preferential dissolution of Cr totaling 13% over 10 minutes at 0.3, 0.6, and 0.9 V vs RHE, with only 1.5% loss of Mn, indicating an enrichment of Mn at the surface of the particles. Despite this asymmetric dissolution, in situ X-ray absorption spectroscopy (XAS) showed no measurable changes in the Mn K-edge at comparable potentials. This lack of change could suggest that modification to the Mn oxidation state in the surface layer is too small or that layer is too thin to be measured with the bulk XAS measurement. Lastly, on-line ICP-MS was used to assess the effects of applied potential, scan rate, and current of Mn-Cr-Sb-O during cyclic voltammetry and accelerated stress tests. With this deeper understanding of the interplay between oxygen reduction and dissolution, testing procedures were identified to maximize both activity and stability. This work highlights the use of multi-modal in situ characterization techniques in tandem to build a more complete model of stability and develop protocols for optimizing catalyst performance.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Efficient Control of Atom Arrangement in Ternary Metal Chalcogenide Nanoparticles Using Precursor Oxidation State
Controlling both the concentration and the distribution of elements in a given material is often crucial to extracting and optimizing synergistic properties of the various constituents. An interesting class of such multielement materials is metal chalcogenide nanoparticles, which exhibit a wide range of composition-dependent optoelectronic properties including both bandgap-mediated processes and localized surface plasmon resonance properties, each of which is useful in applications ranging from energy conversion to sensing. Because metal chalcogenide nanoparticles can support several different metal elements in a variety of chalcogen lattices, this material class has particularly benefited from the ability to control both atom concentration and atom arrangement to tailor final particle properties. The primary method to access complex, multimetallic chalcogenide particles is via a postsynthetic cation exchange strategy. One-pot syntheses have been less explored to access these complex particles, although this route is desirable for economy and scalability. In this work, we compare the composition and morphology outcomes from cation exchange and one-pot preparation approaches using a Cu/Ag/Se system, which is already known to exhibit both binary and ternary metal chalcogenide phases. We show that at similar concentrations of the two metal cations, initial reaction conditions for the one-pot method yield multicomponent nanoparticles, whereas cation exchange yields homogeneous ternary metal chalcogenide structures. We then show that by tuning the precursor oxidation state for the one-pot method, this approach can be used to access homogeneous ternary metal chalcogenide particles that are similar in atom arrangement to the particles obtained using cation exchange. Taken together, our results demonstrate reliable synthetic methods that yield a variety of controlled compositions and composition morphologies in the Cu/Ag/Se system. Importantly, we demonstrate that this entire collection of architectures can all be accessed via a one-pot method simply by modifying metal precursor chemistry. The mechanistic insights gained and the resulting streamlined syntheses outlined indicate pathways to easily scaled, highly tailorable syntheses for rapid translation into downstream technologies.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗