Search NASA⌕ Search

SEARCH · Search NASA

Results for “NAVAL RESEARCH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Development of Metal Boride/Carbide Precursors for MOCVD Applications (Office of Naval Research Research Performance Progress Report)

Annual Report for Office of Naval Research (ONR) program office. Highlights the synthetic and corresponding computational efforts surrounding the synthesis and processing of chemical precursors and their subsequent processing for formation of metal carbide products. Focus of this annual report is largely directed toward the computational effort as that manuscript is being finalized for submission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Broadband laser output by application of stimulated rotational Raman scattering during high-intensity propagation of laser pulses with modified spectral profiles

Research at the Naval Research Laboratory pursues advanced laser technologies that can mitigate laser plasma instabilities (LPI) in applications such as inertial confinement fusion. Increased laser bandwidth is currently being developed as a strategy to suppress LPI. In particular, stimulated rotational Raman scattering (SRRS) has been demonstrated using the Nike krypton fluoride (KrF) laser facility as a viable method for enhancing bandwidth. The technique is applicable to other large laser facilities. Through a combination of high-intensity propagation and optimization of the laser spectrum in the low-energy stages of the laser, the output spectrum of Nike has been broadened with SRRS from its standard operating value of 1 THz full width at half-maximum (FWHM) bandwidth to span a range greater than 4.5 THz. This amount of bandwidth has been shown in simulations to be effective for mitigation of slow-growth laser plasma instabilities, such as cross-beam energy transport (CBET).

Optics↗
DOE OSTI2021

DOE Support for the North American meeting of the International Society for Microbial Electrochemistry and Technology

The objective of the North American meeting of the International Society for Microbial Electrochemistry and Technology (NA-ISMET 2021, postponed from 2020 due to COVID-19) was to provide a welcoming space for an interdisciplinary group of researchers, primarily based in North America, to discuss their latest discoveries and innovative ideas on both basic science and applied technology in the field of microbial electrochemistry. After two years of limited travel and research interactions due to COVID-19, an in-person meeting was urgently needed to facilitate conversations and collaborations that help move the field forward. NA-ISMET 2021 was co-organized by Moh El-Naggar from the University of Southern California (USC) and Orianna Bretschger from Aquacycl Inc. The meeting took place on November 17 – 19, 2021 at the Michelson Center for Convergent Biosciences of USC. We hosted a total number of 65 registered participants from across the United States and several international participants. Thanks to the generous support from the Department of Energy, Air Force Office of Scientific Research, Office of Naval Research, the Army Research Office, the ISMET organization, and Gamry Instruments Inc., we were able to waive registration fees for all participants and reduce travel cost for several early-career researchers. The scientific program included 28 talks (16 from early-career researchers) and 24 posters that highlighted recent advances in microbial electrochemistry.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Absolute Hugoniot measurements in low-density plastic foams on the NIKE shock compression platform

The propagation of Mbar-range shock waves in low-density foam materials is of interest to target design in all approaches to inertial confinement fusion, high energy density physics, and laboratory astrophysics. We report absolute Hugoniot measurements for CH 1.72 N 0.086 O 0.37 plastic foams with 73 and 94 mg/cm 3 densities in the 32–107 km/s shock velocity range. The experiments were performed on the shock compression platform developed on the NIKE KrF laser facility at the U.S. Naval Research Laboratory. NIKE's 4 or 8-ns long flat-top laser pulses drive steady shock waves into foam targets at the ablative pressures of 1–7 Mbar. The propagation of the ablation and shock fronts is tracked continuously in time using streaked side-on monochromatic x-ray imaging radiography. The straight x−t trajectories of the shock and ablation fronts in the recorded streak images confirmed their steadiness. The SESAME tabulated equation of state predictions generally agrees with our Hugoniot data within a 95% confidence band. The experimental uncertainty of the evaluated shock density compression ratios remains large, indicating the need for more experiments and improved theoretical understanding of the strong shock propagation mechanisms in dry foams.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Air-sea interactions yielding rapid Beaufort Sea ice losses during the 2021 ONR THINICE Pilot Field Campaign

Seasonal sea ice coverage has declined in the Pacific Arctic region. Losses of the ice cover have modified the region’s surface heat and momentum fluxes providing weather systems more direct interaction with the upper ocean. For example, recent cyclones that have passed over these waters have initiated multiple air-sea interactions and have impacted mixed layer depth, wave properties, and sea ice mass budgets due to diabatic and/or advective processes. As a United States Office of Naval Research (ONR) Departmental Research initiative, one key component of the ONR THINICE program was to advance knowledge on Arctic cyclone coupling with the ocean surface, its ice cover, and understand how such coupling can lead to rapid ice loss. Leading up to the primary field campaign in August 2022, a pilot field campaign from 19 August to 13 September 2021 focused in Utqiagvik, Alaska and Longyearbyen, Svalbard was carried out. This period was marked by frequent Arctic cyclones, periods of strong low-level winds, and stints of extreme short-term Beaufort Sea ice area losses. Cyclones traversed these waters much more frequently than usual during this 26-day period, but did not exhibit extreme central pressures indicative of high intensity and impactful storms. Using ERA5 atmospheric reanalysis fields, CERES and AIRS surface flux retrievals, and in situ sensor data collected from ice-tethered profilers and ice mass balance buoys, we highlight air-sea-ice interactions in the Beaufort Sea during and between these cyclones leading up to extreme ice loss events. Our case study analysis is aimed at understanding how Arctic cyclones, including air-sea interactions prompted by their passage over the marginal ice zone, influence the end-of-summer ice conditions and ice loss events. This study provides an example where frequent, yet weak storms drive rather large marginal sea-scale losses albeit with heterogenous sea ice effects at local scales.

Ballinger, Thomas [International Arctic Research C↗
DOE OSTI2025

Unprecedented Beaufort Sea ice loss in late summer 2021 and its relationship to an extended period of unusually stormy weather

Previous case studies have linked cyclone-induced atmospheric forcing and/or upper-ocean processes to notable Arctic sea ice loss events in the summers of 2012 and 2016. This study examines a more recent and noteworthy case in late summer 2021 in which substantial sea ice loss followed a period of surface meteorological extremes in the Beaufort Sea region of the Arctic. We focus on the period from mid-August to mid-September 2021 that coincided with the Office of Naval Research THINICE Pilot Field Campaign and investigate stormy and windy conditions with respect to air-sea processes impacting sea ice conditions. We find that during the stormy first half of the campaign, cyclone-induced energy fluxes into the marginal ice zone and surrounding waters preconditioned the ice pack for more rapid melt later in the campaign. The second half of the campaign, in contrast, was marked by non-cyclone wind events that enhanced turbulent (namely sensible) heat fluxes into the ice and upper ocean that increased melt. Moreover, this latter period had enhanced advection of the Beaufort Sea ice pack into above-freezing waters, increasing bottom melt to >1 cm d −1 over the remainder of the campaign. While findings are shown to vary by surface type and at relatively small (i.e. ice-floe) scales, insights are offered on the roles of late summer coupled processes on rapid ice loss events in today’s Arctic environment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Identifying synoptic controls on boundary layer thermodynamic and cloud properties in a regional forecast model

Although most of our understanding of boundary layer cloudiness is based on idealized, subtropical, barotropic marine environments, boundary layer clouds exist across a range of conditions. In this study, we use the Naval Research Laboratory's Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS) and an automated cold-front-relative analysis framework to explore the boundary layer structure associated with low clouds across a transect through the cold front of a midlatitude synoptic cyclone. The model credibly captures boundary layer structure in line with conceptual models of midlatitude cyclones and ground-based observations at Graciosa Island in the Azores. The warm sector is conditionally unstable, with clouds that are too shallow and with too little liquid water, compared to cloud property retrievals from satellite and surface-based instruments. The cold-frontal region exhibits convection associated with weak stability and ascent. Northwest of the cold front, the boundary layer is well mixed, deeper, and capped by a strong inversion maintained by large-scale subsidence. Simulated clouds in frontal and post-frontal regions are mostly too thick, with too much liquid water and too little cloud base drizzle. The post-frontal clouds are associated with grid-scale updrafts, which appear to be the model's attempt to represent mesoscale organization of cellular convection typically observed in the cold sector of midlatitude cyclones. The deep, well-mixed post-frontal boundary layers and cloudiness are maintained by strong surface fluxes, as in cold air outbreaks. Our analysis framework serves as a unique approach to model verification, and our results offer insights into differences in boundary layer cloud behavior between subtropical and synoptic cold-sector regimes.

Eissner, Jordan M. [Univ. of Kansas, Lawrence, KS ↗
DOE OSTI2021

An approach to characterizing spatial aspects of image system blur

Quantitative X-ray radiographic imaging systems that utilize a charged couple device (CCD) camera connected to a thick, monolithic scintillator can exhibit blur that varies spatially across the field of view, especially for thick scintillators used in pulse-power radiography of dynamically compressed objects. Here, a three-point approach to estimating and accounting for this effect is demonstrated by (a) using a local estimation technique to measure the effect of blurring a calibration object at key locations across the field of view, (b) combining each of the local estimates into a spatially varying blurring function via partitions of unity interpolation, and (c) resolving the effects of that blur on the image by solving an ill-posed inverse problem using a spatially varying regularization term. The technique is demonstrated on synthetic examples and actual radiographs collected at the Naval Research Laboratory’s (NRL)Mercury pulsed power facility.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Tight-binding study of beryllium

In this work, we have applied the Naval Research Laboratory Tight-binding (NRL-TB) Method to the hcp alkaline-earth metal Beryllium. This approach consists of fitting to energy band and total energy data generated by the Linearized Augmented Plane Wave (LAPW) for the fcc, bcc, sc, and hcp structures as a function of volume. First, we found that using the Generalized Gradient Approximation (GGA) for the input data secures a better agreement to experimental volumes than the LDA. Second, we found that including small volumes to the fit is needed to get TB parameters that are transferable enough to successfully predict the energies of structures that were not fitted, and to perform molecular dynamics (MD) simulations. The non-orthogonal Hamiltonian obtained, is successful in correctly predicting the hcp lattice as the ground state of Be and finding eight other structures, that were not fitted to LAPW, positioned at higher energies. In addition, the NRL-TB produces accurate energy bands, densities of states, elastic constants, the Bain path and several quantities derived from MD simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Stable and unstable supersonic stagnation of an axisymmetric rotating magnetized plasma

The Naval Research Laboratory ‘Mag Noh problem’, described in this paper, is a self-similar magnetized implosion flow, which contains a fast magnetohydrodynamic (MHD) outward propagating shock of constant velocity. We generalize the classic Noh ( OSTI Tech. Rep. 577058, 1983) problem to include azimuthal and axial magnetic fields as well as rotation. Our family of ideal MHD solutions is five parametric, each solution having its own self-similarity index, gas gamma, magnetization, the ratio of axial to the azimuthal field and rotation. While the classic Noh problem must have a supersonic implosion velocity to create a shock, our solutions have an interesting three-parametric special case with zero initial velocity in which magnetic tension, instead of implosion flow, creates the shock at $t=0+$ . Our self-similar solutions are indeed realized when we solve the initial value MHD problem with the finite volume MHD code Athena. We numerically investigated the stability of these solutions and found both stable and unstable regions in parameter space. Stable solutions can be used to test the accuracy of numerical codes. Unstable solutions have also been widely used to test how codes reproduce linear growth, transition to turbulence and the practically important effects of mixing. Now we offer a family of unstable solutions featuring all three elements relevant to magnetically driven implosions: convergent flow, magnetic field and a shock wave.

Mechanics↗
DOE OSTI2022

Validation of ablation model for polyethylene using pulsed x-ray and proton exposures

The surface erosion of polyethylene is interrogated using pulsed x rays at the Z Machine (Sandia National Laboratories) and with proton beams at the Gamble II generator (Naval Research Laboratory) to validate a coupled model for volumetric thermal ablation, photoionization, finite-rate decomposition, and molecular recombination of radicals. The intense radiation pulses (up to ∼1014W/m2 over tens of nanoseconds) are used to generate one-dimensional vapor flows with low ionization fractions and a simplified geometry compared to typical laser ablation, allowing for evaluation of the model under local thermal equilibrium conditions. Areal momentum carried by the ensuing uniaxial hydrodynamic shock is used to indicate the extent of ablation. The threshold fluence for ablation is found to be in close correspondence with the bulk melt transition, and reasonable agreement with the model is obtained for peak temperatures in polyethylene up to 5500 K and heating rates up to 1011K/s where thermal decomposition reactions are also active.

Moore, N. W. (ORCID:0000000272259674)↗
DOE OSTI2020

Direct drive with the argon fluoride laser as a path to high fusion gain with sub-megajoule laser energy

Argon fluoride (ArF) is currently the shortest wavelength laser that can credibly scale to the energy and power required for high gain inertial fusion. ArF's deep ultraviolet light and capability to provide much wider bandwidth than other contemporary inertial confinement fusion (ICF) laser drivers would drastically improve the laser target coupling efficiency and enable substantially higher pressures to drive an implosion. Our radiation hydrodynamics simulations indicate gains greater than 100 are feasible with a sub-megajoule ArF driver. Our laser kinetics simulations indicate that the electron beam-pumped ArF laser can have intrinsic efficiencies of more than 16%, versus about 12% for the next most efficient krypton fluoride excimer laser. We expect at least 10% ‘wall plug' efficiency for delivering ArF light to target should be achievable using solid-state pulsed power and efficient electron beam transport to the laser gas that was demonstrated with the U.S. Naval Research Laboratory's Electra facility. These advantages could enable the development of modest size and lower cost fusion power plant modules. This would drastically change the present view on inertial fusion energy as being too expensive and the power plant size too large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Response to Comment on “Radiation-Belt Remediation Using Space-Based Antennas and Electron Beams” by G. Ganguli and C. Crabtree

Ganguli and Crabtree have written a comment about a recent article by the authors listed above on radiation-belt remediation. They have objected to our evaluation of the Naval Research Laboratory’s chemical release concept which states that this concept may be impractical due to an apparently low overall efficiency. In their comment, they provide a scientific argument and refer to the published literature to counter our statement. Here, in this response, we provide more details on our numerical calculations and experimental results which led to this evaluation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Calculation of the First Moment of Energy Using D-T Reactivity Formalisms Under the Maxwell-Boltzmann Distribution (Pt. 1)

Nuclear fusion science is an example of a scientific field with a rich history of expert involvement and scientific publications, which together, form an expert-knowledge base. One example of this history is the utilization of published reaction rates from a variety of authors. Investigators for Deuterium-Tritium (D-T) ion fusion can choose from using frequently cited methods: the Bosch and Hale reactivity, thermonuclear reaction rates from Caughlan and Fowler, and the reactivity evaluation from Miley, Towner & Ivich which forms the basis of the Naval Research Lab (NRL) formulary. There are other choices available. Each of the reactivity formulations considered here, are based upon the Maxwell- Boltzmann velocity distribution for D-T fusion ion reactants. Numerical methods for computer codes simulating hot, energetic plasmas, include tabulations of the reactivity, and the first moment of energy. The purpose of this study is to answer the question: what is the first moment of energy, and how has it been formulated? This report is part of a series of reports by the authors on D-T fusion-reaction formalism. The present focus is on defining the mathematical relationship of the first moment of D-T fusion ion kinetic energy, $\langle$E$\rangle$, with the fusion crosssection, fusion reactivity and its derivative with respect to ion-temperature. Three variants of the first moment $\langle$E$\rangle$ are analytically developed and explored: 1) constant cross-section, 2) a normalized first moment, and 3) a particular function of the first moment. Much of the mathematical development is relegated to the Appendices, for a concise presentation of topics and results. A research component of this discussion is our comparison of some of the reactivity and its derivative results between evaluations (1) versus (2) and (3), which the authors have not found in any other publication to date. This investigation is useful for validation, verification (V&V) and uncertainty quantification (UQ) as it compares the work of several authors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Calculation Of The First Moment Of Energy Using D-T Reactivity Formalisms Under The Maxwell-Boltzmann Distribution--Part II

Nuclear fusion science is an example of a scientific field with a rich history of expert involvement and scientific publications, which together, form an expert-knowledge base. One example of a nuclear fusion formalism is the utilization of published reaction rates from a variety of authors. Investigators for Deuterium- Tritium (D-T) ion fusion can choose from using frequently cited methods: the Bosch and Hal reactivity, thermonuclear reaction rates from Caughlan and Fowler, and the reactivity evaluation from Miley, Towner & Ivich which forms the basis of the Naval Research Lab (NRL) formulary. There are other choices available. Each of the reactivity formulations considered here, are based upon the Maxwell-Boltzmann velocity distribution for D-T fusion ion reactants. Numerical methods for computer codes simulating hot, energetic plasmas, include tabulations of the reactivity, and the first moment of energy. This report continues the step toward building understanding of nuclear fusion reactivity formalisms. It is part of a series of reports with the same goal, [5-10] and is the continuation of the Part I paper for defining the mathematical relationship of the first moment of D-T fusion ion kinetic energy, <$E$>, with the fusion cross-section, fusion reactivity and its derivative with ion-temperature. In Part I, three variants of the first moment <$E$> were analytically developed and explored: 1) constant cross-section, 2) a normalized first moment, and 3) a particular function of the first moment from Brysk. In Part II, attention is given to the definition of <$K$>, originally described as a ratio of moments from Brysk, and its relationship to the first moment definitions from Part I. One measure of the progress made in these documents is the identification that Brysk’s ratio of the second moment to the first moment ratio, <$K$>, does not correspond to his provided solution of the first moment of energy. Another measure of (our) progress from this work is the comparison of first moment variants. That comparison includes confirming the importance of cross sections defined in terms of energy. The analytical relationships we have developed among important physics quantities are useful tools in validation and verification (V&V). For example, we can calculate the kinetic energy as a mean or as a first moment, or as a function of the first moment. These analytically-determined values can be compared directly with numerically-determined values, supplied to the authors, representing <$E$>.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Electron Linear Accelerator Additive Manufacturing

Superconducting electron linear accelerators open up new opportunities for advanced materials processing. High energy electrons penetrate deeper within materials, increase the processing depth and rate and enables production of far-from-equilibrium materials and selective processing within a material surface and subsurface. With support from the Office of Naval Research, NASA, and DoE, Mainstream Engineering commissioned a superconducting linear electron accelerator to investigate advanced materials processing and additive manufacturing. The goal of Mainstream's Electron Beam Enabled Advanced Manufacturing (EBEAM) center is to develop unique, far-from-equilibrium materials and alleviate significant technological deficiencies. We will present results of irradiating various metals and their unique material properties. Monte Carlo simulations electron beam and sample interaction were used to optimize the processing parameters and study far-from-equilibrium processing conditions. Applications include stainless steel additive manufacturing for small modular nuclear reactors and dissimilar metal bonding of corrosion-resistant cladding for next-generation molten salt reactors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Low-Flow Marine Hydrokinetic Turbine for Small Autonomous Unmanned Mobile Recharge Stations

A prototype low-flow marine current turbine for deployment from a small unmanned mobile floating platform has been developed for autonomously seeking and harnessing tidal/coastal currents. The support platform is an unmanned surface vehicle (USV), in the form of a catamaran with two electric outboard motors and with capabilities for autonomous navigation. The USV utilized is a WAM-V 16 vehicle that has been developed separately with support from the Office of Naval Research (ONR) [1]. The marine current turbine is based on a freestream waterwheel (FSWW), also known as an undershot waterwheel (FSWW), mounted on the stern of the USV. The concept of operation involves the USV autonomously navigating to a designated marine current resource. Upon arrival, the USV anchors itself, aligns with the current, and deploys the FSWW turbine using a custom cable-lift mechanism. The turbine harnesses the local current, and an onboard power-take-off (PTO) device converts the mechanical energy into electricity, which is stored in an onboard battery bank. When energy harvesting is completed, the turbine and the anchor are retrieved and the USV navigates to a selected location. These unmanned at-sea platforms can provide power to other unmanned maritime systems. Specifically, in this project, the power generated onboard can be used to charge aerial drones via a custom flight deck that has been developed for the USV. The recharging capabilities offered by a fleet of such strategically placed recharging stations can significantly benefit aerial drones operating in the maritime domain by eliminating the need to travel back and forth to land or ship based charging stations. The project has resulted in the development of subcomponents, including the FSWW turbine, a novel PTO, an automated anchoring system for the USV, an automated turbine deployment system, and a flight deck with capabilities onboard the USV for landing, direct-contact charging and takeoff of aerial drones. The design and development of these subsystems have culminated in the overall prototype marine hydrokinetic platform (MHK Platform, Fig. 1). Comprehensive lab and field testing have been conducted to validate the functionality and performance of the platform and its components. The project demonstrates the potential for autonomous, unmanned systems to harness renewable energy from marine currents, and provide sustainable power solutions for maritime applications such as coastal surveillance and environmental monitoring; shoreline mapping; search and rescue; oceanographic research; inspection and maintenance of offshore energy installations like wind turbines and oil rigs; oil spill response; maritime disaster response; and aerial surveys, as well as facilitation of data transfer drones and shore stations.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

CRADA Final Report: CRADA Number NFE-22-09330 with General Fusion

General Fusion is developing a magnetized target fusion (MTF) approach that involves compressing an initial magnetically confined plasma inside a cavity formed in liquid metal. This approach builds from concepts initially developed under the Linus program at the U.S. Naval Research Laboratory and combines it with advances from compact toroid experiment (CTX) and sustained spheromak plasma experiment (SSPX) in compact toroid plasmas and coaxial Marshall gun systems. Modeling the tokamak during compression is central to designing a successful MTF device. The plasma is formed by coaxial helicity injection in the General Fusion device. Immediately after formation, the plasma has a diverted tokamak configuration with a single null. As the wall moves inwards, the plasma is repelled from the conducting surface and driven inwards by currents induced by its magnetic field in the liquid metal wall. As the liquid metal closes (or bridges) the opening of the coaxial plasma injector, the magnetic field topology alters to remove the null. Due to this, the plasma moves from a diverted to a wall-limited configuration. The liquid metal liner continues to close in and change shape, reducing in radius by a factor of ten at the peak of plasma compression. A model of the MTF plasma must be able to handle this continually varying geometry, and to be predictive, it must faithfully include the real imperfections arising in the process. In this project, we pursued a Monte Carlo approach to closures for MHD by computing kinetic electron trajectories in an MHD plasma background from simulations of GF devices. This requires enhancing the capabilities of the KORC-T code for running large ensembles of kinetic trajectories by porting it to GPU architectures and enabling workflows for large ensembles on OLCF machines. With these capabilities, it is possible to produce a large library of kinetic calculations of electron orbits evolving in plasma configurations spanning the magnetic configurations and plasma density profiles, including non-axisymmetry, arising in the General Fusion’s existing PI3 spherical tokamak device. Using ensembles will capture particles passing a single point in space in a given magnetic configuration, and the entire dataset will cover a range of global magnetic field geometries. By sampling around many starting points, this dataset will capture the spatial dependence of the plasma parameters. From this large dataset, it is possible to produce a reduced model for the kinetic effects not captured in MHD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗