Nuclear Data Sheets for A = 147
The 1992 evaluation of A = 147 (1992De38) was updated using data available prior to Nov. 14, 2008.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The 1992 evaluation of A = 147 (1992De38) was updated using data available prior to Nov. 14, 2008.
We describe measurements of fission product data at Los Alamos that are important for determining the number of fissions that have occurred when neutrons are incident on plutonium and uranium isotopes. The fission-spectrum measurements were made using a fission chamber designed by the National Institute for Standards and Technology (NIST) in the BIG TEN critical assembly, as part of the Inter-laboratory Liquid Metal Fast Breeder Reactor (LMFBR) Reaction Rate (ILRR) collaboration. The thermal measurements were made at Los Alamos' Omega West Reactor. A related set of measurements were made of fission-product ratios (so-called R-values) in neutron environments provided by a number of Los Alamos critical assemblies that range from having average energies causing fission of 400-600 keV (BIG TEN and the outer regions of the Flattop-25 assembly) to higher energies (1.4-1.9 MeV) in the Jezebel, and in the central regions of the Flattop-25 and Flattop-Pu, critical assemblies. From these data we determine ratios of fission product yields in different fuel and neutron environments (Q-values) and fission product yields in fission spectrum neutron environments for {sup 99}Mo, {sup 95}Zr, {sup 137}Cs, {sup 140}Ba, {sup 141,143}Ce, and {sup 147}Nd. Modest incident-energy dependence exists for the {sup 147}Nd fission product yield; this is discussed in the context of models for fission that include thermal and dynamical effects. The fission product data agree with measurements by Maeck and other authors using mass-spectrometry methods, and with the ILRR collaboration results that used gamma spectroscopy for quantifying fission products. We note that the measurements also contradict earlier 1950s historical Los Alamos estimates by {approx}5-7%, most likely owing to self-shielding corrections not made in the early thermal measurements. Our experimental results provide a confirmation of the England-Rider ENDF/B-VI evaluated fission-spectrum fission product yields that were carried over to the ENDF/B-VII.0 library, except for {sup 99}Mo where the present results are about 4%-relative higher for neutrons incident on {sup 239}Pu and {sup 235}U. Additionally, our results illustrate the importance of representing the incident energy dependence of fission product yields over the fast neutron energy range for high-accuracy work, for example the {sup 147}Nd from neutron reactions on plutonium. An upgrade to the ENDF library, for ENDF/B-VII.1, based on these and other data, is described in a companion paper to this work.
We describe a new cumulated fission product yield (FPY) evaluation for fission spectrum neutrons on plutonium that updates the ENDF/B-VI evaluation by England and Rider, for the forthcoming ENDF/B-VII.1 database release. We focus on FPs that are needed for high accuracy burnup assessments; that is, for inferring the number of fissions in a neutron environment. Los Alamos conducted an experiment in the 1970s in the Bigten fast critical assembly to determine fission product yields as part of the Interlaboratory Reaction Rate (ILRR) collaboration, and this has defined the Laboratory's fission standard to this day. Our evaluation includes use of the LANL-ILRR measurements (not previously available to evaluators) as well as other Laboratory FPY measurements published in the literature, especially the high-accuracy mass spectrometry data from Maeck and others. Because the measurement database for some of the FPs is small - especially for {sup 99}Mo - we use a meta-analysis that incorporates insights from other accurately-measured benchmark FP data, using R-value ratio measurements. The meta-analysis supports the FP measurements from the LANL-ILRR experiment. Differences between our new evaluations and ENDF/B-VI are small for some FPs (less than 1-2%-relative for {sup 95}Zr, {sup 140}Ba, {sup 144}Ce), but are larger for {sup 99}Mo (4%-relative) and {sup 147}Nd (5%-relative, at 1.5 MeV) respectively. We present evidence for an incident neutron energy dependence to the {sup 147}Nd fission product yield that accounts for observed differences in the FPY at a few-hundred keV average energy in fast reactors versus measurements made at higher average neutron energies in Los Alamos' fast critical assemblies. Accounting for such FPY neutron energy dependencies is important if one wants to reach a goal of determining the number of fissions to accuracies of 1-2%. An evaluation of the energy-dependence of fission product yields is given for all A values based on systematical trends in the measured data, with a focus on the energy dependence over the fast neutron energy range from 0.2-2 MeV. Based on these trends, we present an evaluation of the FPY data at 0.5 and 2.0 MeV average incident neutron energies. This new set of ENDF/B-VII data will enable users to linearly interpolate between the pooled FPY data at {approx}0.5 MeV and our new data at 2 MeV to obtain FPYs at other energies.
Based on a He-jet apparatus coupled with a tape transport system, Very neutron-deficient isotopes {sup 145,147}Er, {sup 146}Ho, and {sup 129}Nd were identified by p-{gamma}(X) or {gamma}-{gamma}(X) coincidence measurements, and their radioactive decay properties were studied.
Cross sections and forward/backward ratios in the laboratory reference system were measured for the {sup 143}Nd(n,{alpha}){sup 140}Ce reaction at 4.0, 5.0, and 6.0 MeV and for the {sup 147}Sm(n,{alpha}){sup 144}Nd reaction at 5.0 and 6.0 MeV. A twin-gridded ionization chamber and large-area back-to-back {sup 143}Nd{sub 2}O{sub 3} samples and {sup 147}Sm{sub 2}O{sub 3} samples were employed. Experiments were performed at the 4.5 MV Van de Graaff accelerator of Peking University, China. Fast neutrons were produced through the {sup 2}H(d,n){sup 3}He reaction by using a deuterium gas target. A small {sup 238}U fission chamber was employed for absolute neutron flux determination, and a BF{sub 3} long counter was used as the neutron flux monitor. Present experimental data are compared with previous measurements, evaluations, and model calculations.
We have measured the {sup 149}Sm(n,alpha){sup 146}Nd cross section at 6.0 MeV to be 0.12+-0.018 mb. This is the first reported result for this cross section in the MeV region and so should be helpful for constraining nuclear data evaluations (which differ by a factor of 40 for this reaction at this energy) and for testing and improving nuclear models. The experiment was performed at the at the 4.5-MV Van de Graaff accelerator of Peking University. Neutrons were produced via the {sup 2}H(d,n){sup 3}He reaction using a deuterium gas target, and absolute neutron flux was determined with a small {sup 238}U fission chamber. Alpha particles were detected using a two-section gridded ionization chamber in which two large-area {sup 149}Sm{sub 2}O{sub 3} samples were placed back-to-back so that the cross section and forward/backward ratio were measured for nearly the entire 4pi solid angle. The data were compared to statistical-model predictions using the code talys. Good agreement between the measured and theoretical cross sections could be obtained with a small modification of the alpha-optical potential parameters from their default values in talys. However, we were not able to reproduce the measured forward/backward ratio. In addition, using the previously reported {sup 147}Sm(n,alpha){sup 144}Nd cross section at 6.0 MeV together with our new result, good agreement was found between the measured and predicted cross-section ratio for these two isotopes. Finally, none of the existing evaluated data libraries are in agreement with our new data to within the experimental uncertainties.
Following their fall to Earth, meteorites experience weathering. In this systematic study, we evaluate the trace element composition of ordinary chondrites from the Antarctic cold desert, and Atacama (Chile) and Lut (Iran) hot deserts, with an emphasis on rare earth elements (REE). Our data confirms that terrestrial weathering of meteorites in hot deserts changes their trace element (Sr, Ba, REE, Hf, Th, and U) concentrations. However, weathering effects in majority of Antarctic samples are limited to slight Ba, REE, Hf, and Th depletions and in some case to U enrichment. In comparison to the Antarctic meteorites, hot desert samples show greater disturbances and REE fractionation relative to the average fall values. We measured the Sm-Nd isotopic composition of the hot desert meteorites that have heavily affected REE compositions. Our Sm-Nd isotopic data show a significant effect of terrestrial weathering evidenced by non-CHUR (147)Sm/(144)Nd and (143)Nd/(144)Nd ratios. Measurements show a higher variation and lower values of (147)Sm/(144)Nd for the Atacama samples than those from the Lut Desert. Deviations from CHUR (147)Sm/(144)Nd value are in positive accordance with the degree of La/Lu fractionation caused by weathering. The ɛNd values of Atacama and Lut deserts meteorites range from −2.20 to +1.61, which is wider than the −1.07 to +0.64 range for falls. We suggest that disturbance of primary Sm/Nd ratios resulting from mixing with terrestrial components originating from soil during weathering is responsible for lower (147)Sm/(144)Nd ratio in these meteorites. The majority of the Atacama meteorites regardless of their weathering degrees have their REE compositions and ɛNd affected by terrestrial contamination. Both (147)Sm/(144)Nd ratio and ɛNd values show no straightforward relationship with weathering degree. However, in both cases the samples with the highest negative isotopic disturbances are H chondrites from the Atacama and Lut deserts. In addition, Ba concentration shows a negative correlation with (147)Sm/(144)Nd ratio. Care must be taken into account while dealing with samples collected from hot deserts, even fresh-looking ones.
Neutron cross section calculations for {sup 136}Ce(n, 2n){sup 135}Ce, {sup 138}Ce(n, 2n){sup 137}Ce, {sup 140}Ce(n, 2n){sup 139}Ce, {sup 142}Ce(n, 2n){sup 141}Ce, {sup 142}Nd(n, 2n){sup 141}Nd, {sup 144}Nd(n, 2n){sup 143}Nd, {sup 146}Nd(n, 2n){sup 145}Nd, {sup 148}Nd(n, 2n){sup 147}Nd, and {sup 150}Nd(n, 2n){sup 149}Nd were done in the incident energy range from 10 to 20 MeV. The calculations were performed using three codes TALYS-1.6 for two-component Exciton model, EMPIRE-3.2 Malta for Exciton model, and ALICE/ASH for the Geometry-Dependent Hybrid (GDH) model. The results of model calculations were compared with the available experimental data and also with the evaluated data in the TENDL-2015 (based on the modified TALYS code), ENDF/B-VII.1 libraries. The calculated cross section data were compared with the available experimental data obtained from EXFOR and also compared with semiempirical formulas around 14–15 MeV. The results of model calculation were found to be in good agreement with the experimental data given in literature and semiempirical data around 14–15MeV.