Search NASA⌕ Search

SEARCH · Search NASA

Results for “NEUTRON LEAKAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Measurements of the atmospheric neutron leakage rate

The atmospheric neutron leakage rate in the energy range from 0.01 to 10,000,000 eV has been measured as a function of latitude, altitude, and time with a neutron detector on board the Ogo 6 satellite. The latitude dependence of the neutron leakage is in reasonable agreement with that predicted by Lingenfelter (1963) and Light et al. (1973) if the neutron energy spectrum has the shape calculated by Newkirk (1963). The change in the neutron latitude dependence with the cosmic ray modulation agrees with the predictions of Lingenfelter and Light et al. For several solar proton events enhancements were observed in the neutron counting rates at lambda greater than or equal to 70 deg. Such events, however, provide an insignificant injection of protons at E less than or equal to 20 MeV into the radiation belts. An isotropic angular distribution of the neutron leakage in the energy range from 0.1 keV to 10 MeV best fits the observed altitude dependence of the neutron leakage flux.

Lockwood, J. A.↗
DOE OSTI2022

Neutron Leakage Spectra Sensitivities for ICSBEP Benchmarks

Neutron leakage spectra have been measured, simulated, and investigated by many groups. These spectra have many uses, including determining shielding requirements and calculating dose for radiation protection purposes, validating nuclear data, and determining material composition. It has even been proposed to use measurements of neutron leakage spectra to determine the soil composition of Mars. As part of the Los Alamos National Laboratory (LANL) Experiments Underpinned by Computational Learning for Improvements in nuclear Data (EUCLID) Laboratory Directed Research Development (LDRD) project, the authors are working on developing methods to calculate sensitivities to neutron leakage spectra. This may allow nuclear data evaluators to better use neutron leakage spectra data to constrain or adjust nuclear data. This may also be particularly useful as many neutron leakage spectra measurements do not require fissile material and can be performed with well characterized neutron sources. Neutron leakage spectra measurements are usually performed by placing a detector at the outside of a nuclear system. This may be a reactor, a neutron generator, or a neutron source. Certain detection systems can use pulse height data to infer neutron energies, other detector systems rely on other ways of determining neutron energy (for example, a Bonner sphere with multiple moderator thicknesses can be used to measure neutron spectrum). These measurements typically rely on some unfolding of the measured results. For pulsed systems like the "Livermore Pulsed Spheres," time-of-flight information can also help to constrain the neutron energy spectra data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

Measurement of leakage neutron spectra for zirconium with D-T neutrons and validation of evaluated nuclear data

Integral neutronics experiments have been a powerful tool and method for examining the reliability of evaluated nuclear data. In the present paper, the accuracy of evaluated nuclear data for Zirconium has been validated by comparing measured leakage neutron spectra with calculated ones. Leakage neutron spectra from the irradiation of D-T neutrons on Zirconium samples were experimentally measured at 60° and 120° by using a time-of-flight method. Theoretical calculations are carried out by Monte Carlo neutron transport code MCNP-4C with evaluated nuclear data of the ENDF/B-VII.0, ENDF/B-VIII.0, JENDL-4.0 and CENDL-3.1 libraries. From the comparisons, it is found that the calculations with JENDL-4.0 gives better agreements with the experiments at 60° while a large discrepancies are observed in the 4–13.5 MeV energy range at 120°. However, the calculated spectra using the data from ENDF/B-VII.0, ENDF/B-VIII.0 and CENDL-3.1 libraries showed some discrepancies with the measured ones, especially caused by the difference of the elastic and inelastic angular distributions and the secondary neutron energy distributions in the continuum inelastic scattering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Fast neutron leakage spectra of the EUCLID experiment

Special nuclear material in sub-critical and critical configurations measured in integral experiments are important for validation and adjustment of nuclear data. Many different evaluations of nuclear data exist, and these different evaluations can provide different values for individual cross sections that vary due to the uncertainties in differential experiments or lack of such data. For integral experiments, differences in these individual cross sections can have compensating errors, which lead to the same answer. One example of this is the Jezebel critical assembly, where k eff of the system is correctly computed by both ENDF/B-VIII.0 and JEFF-3.3, despite having substantially different underlying evaluated values for specific reactions (such as elastic and inelastic cross sections). To reduce compensating errors in nuclear data, the Experiments Underpinned by Computational Learning for Improvements in Nuclear Data (EUCLID) project has utilized machine learning to design a set of sub-critical and critical experiments. These experiments include slab- and cube-like configurations of 239 Pu in the form of the ZPPR plates. Six different responses were measured on a total of thirteen different configurations. One of these responses, the neutron leakage spectrum, was measured using an EJ301D detector. Finally, the results of the neutron leakage spectra show good agreement (within 1–2 σ ) with the expected spectrum from simulations and will be used in the subsequent nuclear data adjustment done by the EUCLID team.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

Neutron Leakage Spectra of the EUCLID Experiment [Abstract]

Integral experiments with sub-critical and critical configurations of special nuclear material are performed in support of nuclear data validation and adjustment. Different nuclear data evaluations may have different values for individual cross sections due to uncertainties in (or lack of) differential experiments, but compensating errors in these data sets can lead to the same k eff results for one application while vastly different for another application. One example of this is 239 Pu, where both ENDF/B-VIII.0 and JEFF-3.3 correctly compute k eff of the Jezebel critical assembly, but the individual contributions from each reaction are vastly different. To help resolve this specific case, the Experiments Underpinned by Computational Learning for Improvements in Nuclear Data (EUCLID) project used machine learning to design a set of experiments to help resolve the compensating errors in 239 Pu. A total of six responses were measured during the experimental campaign, which constrain the data in ways that k eff alone cannot and will be used for adjustment of the nuclear data. One of these responses is the neutron leakage spectrum, which recent work has shown to be useful for constraining the prompt fission neutron spectrum and inelastic scattering. The neutron leakage spectra were measured utilizing a 3 in. right cylinder EJ-301D detector. The measured signal in the detector was deconvoluted using spectrum unfolding techniques, which are presented and compared to simulations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1971

The energy dependence of the cosmic-ray neutron leakage flux in the range 0.01-10 MeV.

Measurement of the cosmic-ray neutron leakage flux and energy spectrum in the range 1 to 10 MeV by a neutron detector on the Ogo 6 satellite from June 7 to Sept. 30, 1969. The same detector simultaneously measured the total leakage flux, having 75% of its response to the leakage flux in the interval from 1 keV to 1 MeV. For a neutron energy spectrum of the form AE to the minus gamma in the range from 1 to 10 MeV, the upper limit to gamma for polar regions was found to be 1.0 and for the equatorial regions was 1.2. For the polar regions, the lower limit to gamma was found to be 0.8. This energy spectrum at 1 to 10 MeV is slightly flatter than Newkirk (1963) predicted.

Jenkins, R. W.↗
DOE OSTI2020

SSA Monte Carlo and Master Equation Modeling of Neutron Leakage Distributions

Strongly stochastic neutron populations in highly subcritical multiplying media containing weak spontaneous fission sources are unique indicators of the presence of SNM. For instance, in neutron multiplicity counting, an extended tail in the count number probability distribution is observed that is a characteristic of and sensitive to the amount of SNM present. Theoretical modeling and efficient computation of stochastic neutron distributions are complementary to experimental measurements and moreover shed light on the fundamental interactions and transport processes that underlie nuclear signatures. Modeling approaches that are intermediate between gross-system level models and high-fidelity but computationally demanding Monte Carlo simulations are of particular interest in this regard. Furthermore we present three advances on existing work in point kinetic or lumped geometry: (i) implementation of the Stochastic Simulation Algorithm (SSA), a system state-updating Monte Carlo method that is more e cient than single-event Monte Carlo in lumped geometries, (ii) application of the backward Master equation to obtain time-gated count moments, and (iii) reconstructing the count number distribution from the deterministically computed moments using a generalized Laguerre polynomial expansion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1973

Transport analysis of measured neutron leakage spectra from spheres as tests of evaluated high energy cross sections

Integral tests of evaluated ENDF/B high-energy cross sections have been made by comparing measured and calculated neutron leakage flux spectra from spheres of various materials. An Am-Be (alpha,n) source was used to provide fast neutrons at the center of the test spheres of Be, CH2, Pb, Nb, Mo, Ta, and W. The absolute leakage flux spectra were measured in the energy range 0.5 to 12 MeV using a calibrated NE213 liquid scintillator neutron spectrometer. Absolute calculations of the spectra were made using version 3 ENDF/B cross sections and an S sub n discrete ordinates multigroup transport code. Generally excellent agreement was obtained for Be, CH2, Pb, and Mo, and good agreement was observed for Nb although discrepancies were observed for some energy ranges. Poor comparative results, obtained for Ta and W, are attributed to unsatisfactory nonelastic cross sections. The experimental sphere leakage flux spectra are tabulated and serve as possible benchmarks for these elements against which reevaluated cross sections may be tested.

Bogart, D. D.↗
NASA NTRS2015

A Study of Neutron Leakage in Finite Objects

A computationally efficient 3DHZETRN code capable of simulating High charge (Z) and Energy (HZE) and light ions (including neutrons) under space-like boundary conditions with enhanced neutron and light ion propagation was recently developed for simple shielded objects. Monte Carlo (MC) benchmarks were used to verify the 3DHZETRN methodology in slab and spherical geometry, and it was shown that 3DHZETRN agrees with MC codes to the degree that various MC codes agree among themselves. One limitation in the verification process is that all of the codes (3DHZETRN and three MC codes) utilize different nuclear models/databases. In the present report, the new algorithm, with well-defined convergence criteria, is used to quantify the neutron leakage from simple geometries to provide means of verifying 3D effects and to provide guidance for further code development.

Wilson, John W.↗
DOE OSTI2017

Heterogeneous Neutron Leakage Model for PWR Pin-by-pin Calculation

In the last few decades, the nodal diffusion calculation accompanied with the assembly homogenization has been widely employed. The single assembly calculation with the reflective boundary condition (BC) would be carried out to determine the assembly-homogenized parameters. Because of the reflective BC, no axial and/or radial leakage rates have been taken into accounted for the lattice calculation. To represent the global influence of the reactor core on an assembly calculation, one mostly frequently uses a procedure called leakage model to approximately take into account the absorption due to the macroscopic structure of the physical flux in a heterogeneous situation. For the assembly homogenization, this absorption is introduced as the product of the leakage coefficient and the buckling obtained for an equivalent homogeneous medium using the well-known homogeneous B1 theory. Clearly, this is an imperfect representation of leakages in a heterogeneous medium. However, the errors introduced by the foregoing procedure are small for the whole? -assembly homogenization in a PWR. When it comes to the pin-by-pin calculation, it is not the case. The leakage rate? will be affected by the neutron streaming effect caused by the heterogeneity of the assembly. Especially when poison pins or empty channels are present, the streaming effect becomes important. The errors introduced appear particularly visible. The heterogeneous leakage model? which assumes that the neutron flux is variational and the leakage rate is not uniform over the lattice pitch is a more appropriate choice. When the heterogeneous leakage model is applied in the lattice calculation for the pin-cell homogenization, the pin-homogenized problem would be changed compared with the original assembly problem without any homogenization technique. So, the Cooperation of the heterogeneous leakage model with the pin-cell homogenization theory is unsettled. In this paper, both homogenous and heterogeneous leakage models are evaluated in pin-by-pin calculation. Their implements used in pin-cell homogenization of the lattice calculation are studied. The diffusion coefficient obtained from transport cross-section and the space-dependent leakage coefficient together with the two leakage models are analyzed for the practical reactor-core applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

The Need for a New LLNL Pulsed Sphere Neutron Leakage Spectra Series

Here, it is shown that spectra measured as part of the Lawrence Livermore National Laboratory Pulsed Sphere (LPS) program offer decisive information to locate formatting or physics issues in nuclear data of key interest for fusion reactor simulations. However, experiments from this measurement series are not benchmarks. For instance, their uncertainties are incomplete. There are also many open questions—e.g., on the setup, the detector response, and whether LPS are accurately modeled—that cannot be answered anymore given the limited documentation and that many of the experimenters are no longer actively working. This limited knowledge has implications when one tries to adjust nuclear data to LPS spectra. Usually, one adjusts to benchmarks representing an application with the hope to get more precise nuclear data for the application of interest where differential data might be scarce and/or to reduce nuclear data uncertainties in the application simulations. However, it is demonstrated that adjustment with LPS spectra without accounting for missing uncertainties and modeling potential biases in the experimental data leads to adjusted data that are highly unphysical. That means adjusted data differ significantly from evaluated data based on information from differential experiments; also, application quantities predicted with the adjusted data deviate distinctly from experimental ones. While we can approximate our limited knowledge on these experiments with Gaussian processes in the adjustment process, this modeling of bias is arbitrary rather than based on a physics explanation, calling into doubt the validity of resulting adjusted data. Thus, we discuss here the need for a new measurement series, learning from the strengths and weaknesses of the LPS program, to yield decisive and well-benchmarked integral experiments to support fusion reactor research.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1991

Lunar neutron leakage fluxes as a function of composition and hydrogen content

Areas of the moon that might have enhanced concentrations of hydrogen are discussed. The fluxes of thermal, epithermal, and fast neutrons escaping from the lunar surface were calculated for eight different compositions and several hydrogen contents. These flux ratios depend on composition and are very sensitive to the hydrogen content. Their measurement using flight-proven techniques from lunar orbit should allow detection and identification of hydrogen residing in either permanently shaded cold traps near the lunar poles or mature regoliths. Knowledge of composition, especially of Fe and Ti, improves the thresholds for hydrogen detection and also could allow identification of Gd and Sm.

Feldman, W. C.↗
DOE OSTI2023

Validating ENDF/B-VIII.1beta1 with LLNL Pulsed-Sphere Neutron-Leakage Spectra [Slides]

In this presentation 6 Li Distinct changes are observed. 235 U Discussion shows Improvements (seen in VIII.1beta0) are coming from new PFNS informed by Chi-Nu experimental data. Additionally, 239 Pu large changes coming from inelastic scattering. 9 Be ENDF/B-VIII.0 shows to be better right after elastic peak while 16 O had slight changes. 19 F had small improvements in ENDF/B-VIII.1 and 56 Fe had noticeable changes in thicker spheres. Examples of negligible changes for the sake of completeness are given.

16-Oxygen↗
DOE OSTI2023

Validating ENDF/B-VIII.1beta2 with LLNL Pulsed-Sphere Neutron-Leakage Spectra [Slides]

This presentation covers noteworthy changes from VIII.1beta0/1 to VIII.1beta2. 6 Li has been fixed (also seen in 7 Li sphere). For 9 Be: we would recommend studying what nuclear data led to an increase in C/E right after peak. For Pb isotopes: we are concerned about new structures introduced after peak. Finally discussed for 239 Pu: Is it worth improving right now?

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗