Search NASA⌕ Search

SEARCH · Search NASA

Results for “NEUTRON TEMPERATURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

In situ synthesis and characterization of uranium carbide using high temperature neutron diffraction

Advances in neutron flux, neutron instrumentation, and sample environments over the past years allowed the development of unique techniques to characterize material synthesis and processing. The available infrastructure at LANL allows to apply these techniques to radioactive materials or materials containing actinides. Here, we present capabilities and results to characterize materials in situ at temperatures above 2000 Celsius degrees such as in loss-of-coolant accidents. Temperatures in excess of 2000 C. degrees are not readily achieved and neutrons are one of a few probes to characterize materials under these conditions. Research in refractory materials, phase diagram studies or accident scenarios for nuclear materials are research areas where such extreme conditions are required. As an example, we present the formation of UC{sub x} from UO{sub 2+x} and graphite in situ using high temperature neutron diffraction with particular focus on resolving the conflicting reports on the crystal structure of non-quenchable cubic UC{sub 2}. The ability to follow the reaction UO{sub 2}+C → UC{sub x}+CO{sub y} in situ with neutron diffraction allows us to conclude that the reaction occurs within minutes over a temperature range of 60 Celsius degrees. The initiation of the reaction is far below the reaction temperature of 2000 C. degrees reported for this reaction in standard text books on actinide chemistry. This may be due to the unusually small ∼100 nm grain size of our UO{sub 2} initial powder. Furthermore, the holding time of several hours reported in the literature would be unnecessary. The neutron diffraction data collected for the cubic high temperature UC{sub 2} phase unambiguously confirmed the disordered C-C dumbbells and excluded structures previously determined by X-ray diffraction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutron diffraction and electrical transport studies on magnetic ordering in terbium at high pressures and low temperatures

Neutron diffraction and electrical transport measurements have been carried out on the heavy rare earth metal terbium at high pressures and low temperatures in order to elucidate the onset of ferromagnetic order as a function of pressure. The electrical resistance measurements show a change in slope as the temperature is lowered through the ferromagnetic Curie temperature. The temperature of this ferromagnetic transition decreases from approximately 240 K at ambient pressure at a rate of –16.7 K/GPa up to a pressure of 3.6 GPa, at which point the onset of ferromagnetic order is suppressed. Neutron diffraction measurements as a function of pressure at temperatures ranging from 90 K to 290 K confirm that the change of slope in the resistance is associated with the ferromagnetic ordering, since this occurs at pressures similar to those determined from the resistance results at these temperatures. Furthermore, a change in ferromagnetic ordering as the pressure is increased above 3.6 GPa is correlated with the phase transition from the ambient hexagonal close packed (hcp) structure to an α-Sm type structure at high pressures.

36 MATERIALS SCIENCE↗

A high temperature neutron diffraction study of the double perovskite Ba{sub 2}{sup 154}SmMoO{sub 6}

Ba{sub 2}LnMoO{sub 6} double perovskites have been recently shown to display a wide range of interesting magnetic and structural properties; Ba{sub 2}{sup 154}SmMoO{sub 6} exhibits simultaneous antiferromagnetic order and a Jahn-Teller distortion. Here we report a high temperature neutron diffraction study of Ba{sub 2}{sup 154}SmMoO{sub 6} from 353 to 877 K. The results evidence a tetragonal to cubic phase transition at 423 K. Above this temperature the thermal displacement parameters of the oxygen atoms are modelled anisotropically as a result of a transverse vibration of the bridging oxygen. A smooth increase in the cell parameter a is observed with temperature for Ba{sub 2}{sup 154}SmMoO{sub 6}. - Graphical abstract: The high temperature crystal structure of Ba{sub 2}{sup 154}SmMoO{sub 6} evidencing a transverse oxygen vibration. Highlights: Black-Right-Pointing-Pointer A high temperature neutron diffraction study has been performed on an isotopically enriched sample of Ba{sub 2}{sup 154}SmMoO{sub 6}. Black-Right-Pointing-Pointer A cubic-tetragonal phase transition occurs below 423 K. Black-Right-Pointing-Pointer The thermal displacement parameters of the bridging oxygens are modelled anisotropically. Black-Right-Pointing-Pointer There is a transverse vibration of the bridging oxygen.

36 MATERIALS SCIENCE↗

High-Temperature Neutron Diffraction Study of Vanadium and Vanadium–Niobium Null-Matrix Alloy for Spectrum Normalization

This study systematically evaluates a vanadium–niobium (V 94.1 Nb 5.9 ) null-matrix alloy as a reference material for neutron spectrum normalization and compares its performance with that of pure vanadium under identical experimental conditions. Neutron diffraction experiments are conducted on the VULCAN Engineering Materials Diffractometer at the Spallation Neutron Source, Oak Ridge National Laboratory, over a temperature range from room temperature to 1200 °C under vacuum. Pure vanadium exhibited distinct Bragg peaks across all temperatures, with its diffraction behavior influenced by both sample orientation and temperature. As the temperature increased, the diffraction peaks shifted to larger d-spacings and decreased in intensity, while spectral deviation near d ≈ 2.8 Å exceeded 10% at 1200 °C. In contrast, the V–Nb alloy produced a nearly featureless spectrum over the full d-spacing range, confirming near-complete cancellation of coherent scattering over the wide temperature range. Its spectra were insensitive to sample orientation, temperature, and microstructural evolution, with spectral deviation around d ≈ 2.8 Å exceeded 5% at 1200 °C. In conclusion, these results demonstrate that the V–Nb null-matrix alloy provides a thermally stable, efficient, and reliable normalization standard for time-of-flight diffractometers or other instrument where it is needed, enabling reduced data acquisition time and improved data quality in high-temperature neutron diffraction experiments.

Alloys↗

D retention and depth profile behavior for single crystal tungsten with high temperature neutron irradiation

Single crystalline W (tungsten) samples irradiated at 633, 963 and 1073 K by neutrons to a damage level of 0.1 dpa were exposed to a high-flux D (deuterium) plasma at 673, 873 and 973 K, respectively, in TPE (Tritium Plasma Experiment) at INL (Idaho National Laboratory). Deuterium desorption was analyzed by TDS (Thermal Desorption Spectroscopy), and D depth profiles were determined by NRA (Nuclear Reaction Analysis) at SNL (Sandia National Laboratories). HIDT (Hydrogen Isotope Diffusion and Trapping) simulation code was applied to evaluate D behavior for neutron-damaged W at higher temperature. The D retention at depths up to 3 f.tm for the neutron-damaged sample at 673 K was two orders of magnitude larger than that for undamaged tungsten, and its D desorption spectrum had a single broad stage at around 900 K. As the neutron irradiation/plasma exposure temperature increased, D retention was largely reduced, and the desorption temperature was increased to higher temperatures above 1100 K. The D depth profiles by NRA also showed D migration toward bulk by higher temperature irradiation, compared to undamaged W. The HIDT simulation indicated that the major binding energy of D was changed from 1.43 eV to 2.07 eV at higher neutron irradiation and plasma exposure temperatures, suggesting that some vacancies and small vacancy clusters would aggregate to form larger voids, or depopulation of weak traps at high D plasma exposure temperatures. It can be said that more stable trapping sites played dominant roles in the D retention at higher neutron irradiation and plasma exposure temperature. The binding energy by HIDT simulation was almost consistent with the reported value by TMAP, but the consideration of not only total D retention measured by TDS but also D depth profile by NRA led to the more accurate D behavior in neutron-damaged W.

36 MATERIALS SCIENCE↗

Temperature dependence of the cation distribution in ZnFe{sub 2}O{sub 4} measured with high temperature neutron diffraction

ZnFe{sub 2}O{sub 4} has a spinel-type structure with Zn{sup 2+} ions located mainly on tetrahedral sites and Fe{sup 3+} ions located on octahedral sites. ZnFe{sub 2}O{sub 4} was synthesized in air by a solid state reaction and characterized with X-ray diffraction, high temperature neutron diffraction, resistivity measurements and dilatometry. The distribution of cations in ZnFe{sub 2}O{sub 4} was measured from 298 to 1243 K and results show that above 673 K the cations start to redistributed in the structure. ZnFe{sub 2}O{sub 4} has a semi-conducting behavior at room temperature, but at temperatures above 905 K the conductivity decreases as the result of an Fe-Fe interaction between octahedral sites. - High temperature in situ neutron powder diffraction, dilatometry and resistivity measurements was performed on the spinel-type oxide ZnFe{sub 2}O{sub 4}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Combined Variable-Temperature Neutron Diffraction and Thermogravimetric Analysis Study on a Promising Oxygen Electrode, SrCo 0.9 Nb 0.1 O 3–δ , for Reversible Solid Oxide Fuel Cells

The present study reported herein investigates the temperature–structure–stoichiometry relationship of a promising oxygen electrode SrCo 0.9 Nb 0.1 O 3-δ over a temperature (T) range from room temperature (RT) to 900 °C. The techniques employed are variable-temperature neutron diffraction (VTND) and thermogravimetric analysis (TGA). At $T$ < 75 °C, VTND reveals a tetragonal (P4/mmm) structure with a G-type magnetic ordering. Above 75 °C, the nucleus structure remains the same, while the magnetic ordering disappears. A phase transition from tetragonal ($P4/mmm$) to cubic ($Pm\overline3m$) is observed at 412 °C, where the two Co sites and three O sites in the $P4/mmm$ phase converge to one equivalent site, respectively. The phase transition temperature coincides with the peak temperature of oxygen uptake obtained by TGA. It is also observed that the Nb dopant has no preferred Co site to occupy. The oxygen vacancies are mostly located at the O3 site surrounding the Co2 site in the $P4/mmm$ structure. The intermediate-spin state of Co 3+ at the Co2 site is responsible for the observed distortions of CoO 6 octahedra, i.e., elongation of Co2O 6 octahedra and shortening of Co1O 6 octahedra along the c-axis, which is a phenomenon known as Jahn–Teller distortion. At high temperatures, large thermal displacement factor for O 2– is observed with high concentration of oxygen vacancies, providing a structural environment favorable to high O 2– conductivity in Nb-doped SrCoO 3 -based oxygen electrode materials.

25 ENERGY STORAGE↗

Room-temperature neutron and X-ray data collection of 3CL M pro from SARS-CoV-2

The replication of SARS-CoV-2 produces two large polyproteins, pp1a and pp1ab, that are inactive until cleavage by the viral chymotrypsin-like cysteine protease enzyme (3CL M pro ) into a series of smaller functional proteins. At the heart of 3CL M pro is an unusual catalytic dyad formed by the side chains of His41 and Cys145 and a coordinated water molecule. The catalytic mechanism by which the enzyme operates is still unknown, as crucial information on the protonation states within the active site is unclear. To experimentally determine the protonation states of the catalytic site and of the other residues in the substrate-binding cavity, and to visualize the hydrogen-bonding networks throughout the enzyme, room-temperature neutron and X-ray data were collected from a large H/D-exchanged crystal of ligand-free (apo) 3CL M pro .

3CL Mpro↗

Mechanical and Microstructural Characterization of Low-Temperature Neutron Irradiated Zircaloy-4

Zr-based alloys, namely Zircaloy-2, Zircaloy-4, ZIRLO, or M5, have been used in light water reactors (LWRs) as structural materials (cladding, pressure tubes, and etc.). Under irradiation conditions, especially at harsh pressurized water reactor (PWR) conditions, these Zr alloys can undergo embrittlement due to corrosion, hydriding, and irradiation induced stresses. This ultimately leads to the severe degradation of Zr-alloys and increase the probability of fuel failure. While various research efforts have been conducted in developing better Zr-based alloys to withstand these harsh environments, there is a considerable amount of Zr-alloy characteristics, such as change in mechanical properties under irradiation conditions and its relationship to the materials microstructure, that need to be studied. This present study has focused on investigation of mechanical and microstructural properties of Zircaloy-4 under low temperature (80 - 100 deg. C) neutron irradiation conditions. Some of the samples studied were also hydrided to evaluate influence of hydride precipitates in the material. (authors)

36 MATERIALS SCIENCE↗

Clamp cell with in situ pressure monitoring for low-temperature neutron scattering measurements

In this study, a clamp pressure cell for neutron scattering experiments at low temperatures and in external magnetic fields under pressure up to 2 GPa has been fabricated and tested. The cell provides optical access to the sample space that allows instantaneous pressure determination during sample loading, cooling and measuring using ruby and/or samarium doped strontium tetraborate fluorescence monitoring. Additionally, a new calibration curve of the pressure-induced shift of the 7 D 0 - 5 F 0 (0-0) line in the fluorescent spectrum of SrB 4 O 7 :Sm 2+ for moderate pressures, P≤2 GPa, is given.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Thermal expansion and decomposition of jarosite: a high-temperature neutron diffraction study

The structure of deuterated jarosite, KFe{sub 3}(SO{sub 4}){sub 2}(OD){sub 6}, was investigated using time-of-flight neutron diffraction up to its dehydroxylation temperature. Rietveld analysis reveals that with increasing temperature, its c dimension expands at a rate {approx}10 times greater than that for a. This anisotropy of thermal expansion is due to rapid increase in the thickness of the (001) sheet of [Fe(O,OH){sub 6}] octahedra and [SO{sub 4}] tetrahedra with increasing temperature. Fitting of the measured cell volumes yields a coefficient of thermal expansion, a = a{sub 0} + a{sub 1} T, where a{sub 0} = 1.01 x 10{sup -4} K{sup -1} and a{sub 1} = -1.15 x 10{sup -7} K{sup -2}. On heating, the hydrogen bonds, O1{hor_ellipsis}D-O3, through which the (001) octahedral-tetrahedral sheets are held together, become weakened, as reflected by an increase in the D{hor_ellipsis}O1 distance and a concomitant decrease in the O3-D distance with increasing temperature. On further heating to 575 K, jarosite starts to decompose into nanocrystalline yavapaiite and hematite (as well as water vapor), a direct result of the breaking of the hydrogen bonds that hold the jarosite structure together.

54 ENVIRONMENTAL SCIENCES↗

A high-temperature neutron diffraction study of Nb 2 AlC and TiNbAlC

In this paper, we report on the crystal structures of Nb 2 AlC and TiNbAlC actual composition (Ti 0.45 ,Nb 0.55 ) 2 AlC compounds determined from Rietveld analysis of neutron diffraction patterns in the 300-1173 K temperature range. The average linear thermal expansion coefficients of a Nb 2 AlC sample in the a and c directions are, respectively, 7.9(5)x10 -6 K -1 and 7.7(5)x10 -6 K -1 on one neutron diffractometer and 7.3(3)x10 -6 K -1 and 7.0(2)x10 -6 K -1 on a second diffractometer. The respective values for the (Ti 0.45 ,Nb 0.55 ) 2 AlC composition - only tested on one diffractometer - are 8.5(3)x10 -6 K -1 and 7.5(5)x10 -6 K -1 . These values are relatively low compared to other MAX phases. Like other MAX phases, however, the atomic displacement parameters show that the Al atoms vibrate with higher amplitudes than the Ti and C atoms, and 1 more along the basal planes than normal to them. In addition, when the predictions of the atomic displacement parameters obtained from density functional theory are compared to the experimental results, good quantitative agreement is found for the Al atoms. In case of the Nb and C atoms, the agreement was more qualitative.

36 MATERIALS SCIENCE↗

Impact of Low-Temperature Neutron Irradiation on Tensile Behavior of Base Metal and Electron-Beam Welded 316L Stainless Steel

Here, a study of 316L type stainless steel in its base metal and electron-beam (e-beam) welded conditions was performed to observe the effects of low-temperature (60 °C to 100 °C) neutron irradiation on the tensile behavior of the samples. Fractography was used in understanding the tensile-tested fracture surfaces of the 316L samples in these different forms with the characterization of the both base metal and welded samples using electron microscopy. Irradiation of the tensile specimens made free of defects of cutting and mechanical polishing showed a reduction in their tensile ductility with increased radiation-induced hardening up to 1.40 × 10 19 n/cm 2 (E > 0.1 MeV) fluence that corresponds to 1.1x 10 -2 dpa, even at the low irradiation temperatures. These low-temperature neutron irradiated base metal and e-beam welded 316L specimens also consisted of closely similar fracture surfaces characteristic of ductile rupture.

36 MATERIALS SCIENCE↗

Modeling of irradiation hardening of iron after low–dose and low–temperature neutron irradiation

Irradiation hardening is a prominent low-temperature degradation phenomena in materials, and is characterized both by an irradiation-induced increase in yield strength along with the loss of ductility. In this paper, a reaction–diffusion cluster dynamics model is used to predict the distribution of vacancy and interstitial clusters in iron following low-temperature (<373 K) and low-dose (<0.1 dpa) neutron irradiation. The predicted microstructure evolutions of high-purity iron samples are compared to published experimental data (positron annihilation spectroscopy and transmission electron microscopy) and show good agreement for neutron irradiation in this regime. The defect cluster distributions are then coupled to a dispersed barrier hardening model that assumes a strength factor, α, which varies with cluster type and size to compute the yield strength increase; the results of which agree reasonably well with tensile tests performed in previous studies. Furthermore, the modeling results presented here compare quite well to the experimental observations in the low-dose regime, and provide insight into the underlying microstructure–property relationships and the need for spatially dependent modeling to accurately predict the saturation behavior of yield strength changes observed experimentally at higher dose levels.

36 MATERIALS SCIENCE↗

Internal neutronics-temperature coupling in Serpent 2 - Reactivity differences resulting from choice of material property correlations

This paper describes the unique way of simultaneously solving the power and temperature distributions of a nuclear system with the Monte Carlo neutron transport code Serpent 2. The coupled solution is achieved through the implementation of an internal temperature solver and material property correlations in the code. The program structure is reviewed concerning the temperature solver and the internal correlations as well as the internal coupling between these two and the neutron transport part. To estimate the reactivity differences resulting from correlation choices a simple pin-cell case has been calculated. It is established, that some correlation choices may result in difference in reactivity of approximately 100 pcm. (authors)

97 MATHEMATICS AND COMPUTING↗

A Study of Low-Temperature Neutron Star Atmospheres

We present a study of how a low-temperature accreted atmosphere influences the emitted X-ray spectrum of a neutron star. The atmosphere models and spectra were computed with Zcode, a multigroup radiation transfer code developed at the Los Alamos National Laboratory. Though the underlying hot neutron star behaves as a blackbody, the atmosphere shifts the peak of spectrum away from a blackbody and toward higher energies, producing an emitted spectrum similar to a dilute blackbody. Quantifying the effects of this atmosphere will remove a source of uncertainty in X-ray observations and better constrain the mass-radius relation for neutron stars and thus the equation of state of dense matter. We present a suite of these atmospheres with varying compositions and temperatures as well as the resulting spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of low-temperature neutron irradiation on the microstructure and tensile properties of duplex 2304 stainless steel and its electron-beam welds

A lean duplex stainless steel material (2304-grade) in its base metal and electron beam (e-beam) welded conditions were studied microstructurally and mechanically as a function of irradiation conditions to evaluate its use as a structural material at low temperatures (60–100 °C). Neutron irradiation up to a fluence of 1.40 × 10 19 n/cm 2 (E > 0.1 MeV) or ~0.011 dpa decreased the total elongation of both base metal and e-beam welded samples. Overall, radiation hardening was observed in all the samples. The transversely cut irradiated samples showed some nonuniform quasi-cleavage and shearing in their fracture surfaces, indicating the variance of ductile nature of the two-phased (deformable austenite and harder ferrite) duplex structure. The e-beam welded samples also showed quasi-cleavage fracture, which is a characteristic of radiation-induced embrittlement. Furthermore, these observations of the e-beam welded samples were attributed to the formation of coarse ferrites, grain boundary and intragranular phases such as γ 2 and γ 3 , and minor impurity phases such as CrN and Cr 2 N in the weld pool and/or heat-affected zone of the samples. Radiation-induced elemental segregation was also identified in the post-irradiated base metal.

36 MATERIALS SCIENCE↗

High-dose, intermediate-temperature neutron irradiation effects on silicon carbide composites with varied fiber/matrix interfaces

SiC/SiC composites are promising structural candidate materials for various nuclear applications over the wide temperature range of 300–1000 °C. Accordingly, irradiation tolerance over this wide temperature range needs to be understood to ensure the performance of these composites. In this study, neutron irradiation effects on dimensional stability and mechanical properties to high doses (11–44 dpa) at intermediate irradiation temperatures (˜600 °C) were evaluated for Hi-Nicalon Type-S or Tyranno-SA3 fiber–reinforced SiC matrix composites produced by chemical vapor infiltration. The influence of various fiber/matrix interfaces, such as a 50–120 nm thick pyrolytic carbon (PyC) monolayer interphase and 70–130 nm thick PyC with a subsequent PyC (˜20 nm)/SiC (˜100 nm) multilayer, was evaluated and compared with the previous results for a thin-layer PyC (˜20 nm)/SiC (˜100 nm) multilayer interphase. Four-point flexural tests were conducted to evaluate post-irradiation strength, and SEM and TEM were used to investigate microstructure. Regardless of the fiber type, monolayer composites showed considerable reduction of flexural properties after irradiation to 11–12 dpa at 450–500 °C; and neither type showed the deterioration identified at the same dose level at higher temperatures (>750 °C) in a previous study. After further irradiation to 44 dpa at 590–640 °C, the degradation was enhanced compared with conventional multilayer composites with a PyC thickness of ˜20 nm. Multilayer composites have shown comparatively good strength retention for irradiation to ˜40 dpa, with moderate mechanical property degradation beginning at 70–100 dpa. As a result, irradiation-induced debonding at the F/M interface was found to be the major cause of deterioration of various composites.

36 MATERIALS SCIENCE↗