Search NASA⌕ Search

SEARCH · Search NASA

Results for “NICKEL BASE ALLOYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1966

Joining of Nickel and Nickel-Base Alloys

Nickel and nickel- base alloys are amenable to joining with many of the familiar joining processes. Some new joining processes also have been used successfully. In general, conventional joining procedures are used with only slight required modifications, depend­ing on the particular alloy to be welded. However, some special precautions must be taken. Harmful materials must be removed from the joint or surrounding areas or they may damage the weld and the nearby heated parent metal. Some high-strength age­ hardenable alloys are prone to cracking in or near joint areas, unless the material is in the proper condition of heat treatment prior to joining operations. Foreign material and flux residues left from joining operations can cause trouble in subsequent service if not removed. Procedures for joining these alloys have been developed that eliminate or minimize the usual difficulties that have been experienced. When proper procedures are employed, joining of nickel and nickel- base alloys can be performed satisfactorily.

Vagi, J. J.↗
NASA NTRS1977

Nickel base alloy

A nickel base superalloy for use at temperatures of 2000 F (1095 C) to 2200 F (1205 C) was developed for use as stator vane material in advanced gas turbine engines. The alloy has a nominal composition in weight percent of 16 tungsten, 7 aluminum, 1 molybdenum, 2 columbium, 0.3 zirconium, 0.2 carbon and the balance nickel.

Freche, J. C.↗
NASA NTRS1972

Welding and brazing of nickel and nickel-base alloys

The joining of four types of nickel-base materials is described: (1) high-nickel, nonheat-treatable alloys, (2) solid-solution-hardening nickel-base alloys, (3) precipitation-hardening nickel-base alloys, and (4) dispersion-hardening nickel-base alloys. The high-nickel and solid-solution-hardening alloys are widely used in chemical containers and piping. These materials have excellent resistance to corrosion and oxidation, and retain useful strength at elevated temperatures. The precipitation-hardening alloys have good properties at elevated temperature. They are important in many aerospace applications. Dispersion-hardening nickel also is used for elevated-temperature service.

Mortland, J. E.↗
DOE OSTI2023

Atomic Diffusion, Segregation, and Grain Boundary Migration in Nickel-Based Alloys from Molecular Dynamics Simulations

Grain boundary diffusion and metal mobility in alloys control material performance in many applications and yet remain poorly understood at a mechanistic level. With advances in accessible time and length scales for computational molecular simulations, and recent force field developments, we now possess tools to help unravel those mechanisms. Using large-scale molecular dynamics simulations, here we examined vacancy-mediated diffusion processes in Ni-5Cr alloy with low and high-energy grain boundaries. We show that atomic diffusion inside the grain boundary plane is about four times higher than bulk diffusion, at any temperature, and exhibits a typical Arrhenius behavior with a very small energy barrier (0~.8 eV for Cr and 0.7 eV for Ni within 1300-1600 K). Additionally, the fastest diffusing species inverts; Cr diffusion was faster than Ni in the bulk but slower in the grain boundaries. This is attributed to the creation of high cohesive energy clusters of Cr at the grain boundary. Grain boundary migration was also observed to be temperature dependent and appears to be two times higher in the 5% Cr alloy than in pure Ni, highlighting the important role of the alloying element on grain boundary motion.

Simonnin, Pauline GN↗
NASA NTRS1980

Recrystallization characteristics of oxide dispersion strengthened nickel-base alloys

Electron microscopy was employed to study the process of recrystallization in two oxide dispersion strengthened (ODS) mechanically alloyed nickel-base alloys, MA 754 and MA 6000E. MA 754 contained both fine, uniformly dispersed particles and coarser oxides aligned along the working direction. Hot rolled MA 754 had a grain size of 0.5 microns and high dislocation densities. After partial primary recrystallization, the fine grains transformed to large elongated grains via secondary (or abnormal) grain growth. Extruded and rolled MA 6000E contained equiaxed grains of 0.2 micron diameter. Primary recrystallization occurring during working eliminated virtually all dislocations. Conversion from fine to coarse grains was triggered by gamma prime dissolution; this was also a process of secondary or abnormal grain growth. Comparisons were made to conventional and oxide dispersion strengthened nickel-base alloys.

Hotzler, R. K.↗
NASA NTRS1975

High gas velocity oxidation and hot corrosion testing of oxide dispersion-strengthened nickel-base alloys

Several oxide dispersion strengthened (ODS) nickel-base alloys were tested in high velocity gases for cyclic oxidation resistance at temperatures to 1200 C and times to 500 hours and for hot corrosion resistance at 900 C for 200 hours. Nickel-chromium-aluminum ODS alloys were found to have superior resistance to oxidation and hot corrosion when compared to bare and coated nickel-chromium ODS alloys. The best of the alloys tested had compositions of nickel - 15.5 to 16 weight percent chromium with aluminum weight percents between 4.5 and 5.0. All of the nickel-chromium-aluminum ODS materials experienced small weight losses (less than 16 mg/sq cm).

Deadmore, D. L.↗
NASA NTRS2003

Near-Threshold Fatigue Crack Growth Behavior of Fine-Grain Nickel-Based Alloys

Constant-Kmax fatigue crack growth tests were performed on two finegrain nickel-base alloys Inconel 718 (DA) and Ren 95 to determine if these alloys exhibit near-threshold time-dependent crack growth behavior observed for fine-grain aluminum alloys in room-temperature laboratory air. Test results showed that increases in K(sub max) values resulted in increased crack growth rates, but no evidence of time-dependent crack growth was observed for either nickel-base alloy at room temperature.

Newman, John A.↗