Search NASA⌕ Search

SEARCH · Search NASA

Results for “NIOBATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Investigation of a Solid-State Tuning Behavior in Lithium Niobate

Electric field-based frequency tuning of acoustic resonators at the material level provides an enabling technology for building complex tunable filters. Tunable acoustic resonators were fabricated in thin plates (h/λ ~ 0.05) of X-cut lithium niobate (90°, 90°, ψ = 170°). Lithium niobate is known for its large electromechanical coupling (SH: K 2 40%) and thus applicability for low-insertion loss and wideband filter applications. We demonstrate the effect of a DC bias to shift the resonant frequency by ~0.4% by directly tuning the resonator material. The mechanism is based on the nonlinearities that exist in the piezoelectric properties of lithium niobate. Devices centered at 332 MHz achieved frequency tuning of 12 kHz/V through application of a DC bias.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

High-efficiency second harmonic generation of blue light on thin-film lithium niobate

The strength of interactions between photons in a χ (2) nonlinear optical waveguide increases at shorter wavelengths. These larger interactions enable coherent spectral translation and light generation at a lower power, over a broader bandwidth, and in a smaller device: all of which open the door to new technologies spanning fields from classical to quantum optics. Stronger interactions may also grant access to new regimes of quantum optics to be explored at the few-photon level. One promising platform that could enable these advances is thin-film lithium niobate (TFLN), due to its broad optical transparency window and possibility for quasi-phase matching and dispersion engineering. In this Letter, we demonstrate second harmonic generation of blue light on an integrated thin-film lithium niobate waveguide and observe a conversion efficiency of η 0 = 33, 000%/W- cm 2 , significantly exceeding previous demonstrations.

Park, Taewon↗
DOE OSTI2021

Ultralow-threshold thin-film lithium niobate optical parametric oscillator

Materials with strong second-order ( χ <#comment/> ( 2 ) ) optical nonlinearity, especially lithium niobate, play a critical role in building optical parametric oscillators (OPOs). However, chip-scale integration of low-loss χ <#comment/> ( 2 ) materials remains challenging and limits the threshold power of on-chip χ <#comment/> ( 2 ) OPO. Here we report an on-chip lithium niobate optical parametric oscillator at the telecom wavelengths using a quasi-phase-matched, high-quality microring resonator, whose threshold power ( ∼ <#comment/> 30 µ <#comment/> W ) is 400 times lower than that in previous χ <#comment/> ( 2 ) integrated photonics platforms. An on-chip power conversion efficiency of 11% is obtained from pump to signal and idler fields at a pump power of 93 µW. The OPO wavelength tuning is achieved by varying the pump frequency and chip temperature. With the lowest power threshold among all on-chip OPOs demonstrated so far, as well as advantages including high conversion efficiency, flexibility in quasi-phase-matching, and device scalability, the thin-film lithium niobate OPO opens new opportunities for chip-based tunable classical and quantum light sources and provides a potential platform for realizing photonic neural networks.

Lu, Juanjuan (ORCID:0000000319389119)↗
DOE OSTI2022

Spectral control of nonclassical light pulses using an integrated thin-film lithium niobate modulator

Abstract Manipulating the frequency and bandwidth of nonclassical light is essential for implementing frequency-encoded/multiplexed quantum computation, communication, and networking protocols, and for bridging spectral mismatch among various quantum systems. However, quantum spectral control requires a strong nonlinearity mediated by light, microwave, or acoustics, which is challenging to realize with high efficiency, low noise, and on an integrated chip. Here, we demonstrate both frequency shifting and bandwidth compression of heralded single-photon pulses using an integrated thin-film lithium niobate (TFLN) phase modulator. We achieve record-high electro-optic frequency shearing of telecom single photons over terahertz range (±641 GHz or ±5.2 nm), enabling high visibility quantum interference between frequency-nondegenerate photon pairs. We further operate the modulator as a time lens and demonstrate over eighteen-fold (6.55 nm to 0.35 nm) bandwidth compression of single photons. Our results showcase the viability and promise of on-chip quantum spectral control for scalable photonic quantum information processing.

Optics↗
DOE OSTI2023

Visible-telecom tunable dual-band optical isolator based on dynamic modulation in thin-film lithium niobate

Optical isolators are an essential component of photonic systems. Current integrated optical isolators have limited bandwidths due to stringent phase-matching conditions, resonant structures, or material absorption. Here, we demonstrate a wideband integrated optical isolator in thin-film lithium niobate photonics. We use dynamic standing-wave modulation in a tandem configuration to break Lorentz reciprocity and achieve isolation. We measure an isolation ratio of 15 dB and insertion loss below 0.5 dB for a continuous wave laser input at 1550 nm. In addition, we experimentally show that this isolator can simultaneously operate at visible and telecom wavelengths with comparable performance. Isolation bandwidths up to ∼100 nm can be achieved simultaneously at both visible and telecom wavelengths, limited only by the modulation bandwidth. Our device’s dual-band isolation, high flexibility, and real-time tunability can enable novel non-reciprocal functionality on integrated photonic platforms.

Shah, Manav↗
DOE OSTI2020

Cavity electro-optics in thin-film lithium niobate for efficient microwave-to-optical transduction

Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large-scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical pump power to overcome weak EO coupling and reach high efficiency. Here, we create an EO transducer in thin-film lithium niobate, a platform that provides low optical loss and strong EO coupling. We demonstrate on-chip transduction efficiencies of up to and of optical pump power. The transduction efficiency can be improved by further reducing the microwave resonator’s piezoelectric coupling to acoustic modes, increasing the optical resonator quality factor to previously demonstrated levels, and changing the electrode geometry for enhanced EO coupling. We expect that with further development, EO transducers in thin-film lithium niobate can achieve near-unity efficiency with low optical pump power.

Holzgrafe, Jeffrey (ORCID:0000000160121451)↗
DOE OSTI2020

Toward 1% single-photon anharmonicity with periodically poled lithium niobate microring resonators

The absence of the single-photon nonlinearity has been a major roadblock in developing quantum photonic circuits at optical frequencies. In this paper, we demonstrate a periodically poled thin film lithium niobate microring resonator (PPLNMR) that reaches 5,000,000%/W second-harmonic conversion efficiency—almost 20-fold enhancement over the state-of-the-art—by accessing its largest χ <#comment/> ( 2 ) tensor component d 33 via quasi-phase matching. The corresponding single-photon coupling rate g / 2 π <#comment/> is estimated to be 1.2 MHz, which is an important milestone as it approaches the dissipation rate κ <#comment/> / 2 π <#comment/> of best-available lithium niobate microresonators developed in the community. Using a figure of merit defined as g / κ <#comment/> , our device reaches a single-photon nonlinear anharmonicity approaching 1%. We show that, by further scaling of the device, it is possible to improve the single-photon anharmonicity to a regime where photon blockade effect can be manifested.

Lu, Juanjuan (ORCID:0000000319389119)↗
DOE OSTI2020

A heterogeneously integrated silicon photonic/lithium niobate travelling wave electro-optic modulator

Silicon photonics is a platform that enables densely integrated photonic components and systems and integration with electronic circuits. Depletion mode modulators designed on this platform suffer from a fundamental frequency response limit due to the mobility of carriers in silicon. Lithium niobate-based modulators have demonstrated high performance, but the material is difficult to process and cannot be easily integrated with other photonic components and electronics. In this manuscript, we simultaneously take advantage of the benefits of silicon photonics and the Pockels effect in lithium niobate by heterogeneously integrating silicon photonic-integrated circuits with thin-film lithium niobate samples. We demonstrate the most CMOS-compatible thin-film lithium niobate modulator to date, which has electro-optic 3 dB bandwidths of 30.6 GHz and half-wave voltages of 6.7 V×cm. These modulators are fabricated entirely in CMOS facilities, with the exception of the bonding of a thin-film lithium niobate sample post fabrication, and require no etching of lithium niobate.

42 ENGINEERING↗
DOE OSTI2021

Mitigating photorefractive effect in thin-film lithium niobate microring resonators

Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-film lithium niobate. In this paper, we show that the dielectric cladding on a lithium niobate microring resonator has a significant influence on the photorefractive effect. By removing the dielectric cladding layer, the photorefractive effect in lithium niobate ring resonators can be effectively mitigated. Our work presents a reliable approach to control the photorefractive effect on thin-film lithium niobate and will further advance the performance of integrated classical and quantum photonic devices based on thin-film lithium niobate.

42 ENGINEERING↗
DOE OSTI2024

High acoustic velocity x -cut lithium niobate sub-terahertz electromechanics

Micromechanical resonators operating above 100 GHz are favorable candidates for quantum physics studies due to their stronger ability to withstand thermal fluctuations, allowing them to remain in the quantum ground state even at kelvin temperatures. Furthermore, electromechanical resonators at sub-terahertz frequencies enable high-speed data transfer in modern communication technologies, making them attractive for communication industries. Recently, sub-terahertz electromechanics has been demonstrated on z-cut thin-film lithium niobate. Yet, the x-cut thin-film lithium niobate is more advantageous for scaling above 100 GHz due to its faster acoustic velocity. Here, we report sub-terahertz electromechanics on x-cut thin-film lithium niobate utilizing the thickness-longitudinal mode. In addition, we study the orientation dependence of these mechanical resonators due to the anisotropy of lithium niobate. We find that devices with a cross section close to the xy plane can be more efficiently excited, in contrast to those near the xz plane. This difference stems from the orientation-dependent nature of the e12 piezoelectric coupling element of the x-cut lithium niobate film. This investigation could assist in optimizing resonator designs by choosing the crystallographic direction that offers the best performance for specific functionalities.

Physics↗
DOE OSTI2018

Hydrothermal synthesis of bismuth niobates and their application in azo-dyes photo-discoloration

Highlights: • A new method of synthesis for obtaining pure phase bismuth niobates is proposed. • α-BiNbO{sub 4} and β-BiNbO{sub 4} were obtained by the calcination of an amorphous precursor. • Nanosized bismuth niobates have shown high band gap energies (3.2–3.4 eV). • Bismuth niobates are very efficient in the photo-discoloration of methyl orange. - Abstract: Bismuth niobates were obtained by hydrothermal synthesis using bismuth (III) nitrate pentahydrate [Bi(NO{sub 3}){sub 3}·5H{sub 2}O] and a Lindqvist potassium hexaniobate [K{sub 8-x}H{sub x}Nb{sub 6}O{sub 19}.nH{sub 2}O] as soluble precursors. Pure crystalline Bi{sub 5}Nb{sub 3}O{sub 15}, β-BiNbO{sub 4} and α- BiNbO{sub 4} were obtained as pure phases through co-precipitation at pH = 8, followed by hydrothermal treatment and calcination at 600, 700 or 800 °C, respectively, which are milder temperatures than those used in solid state, citrate sol-gel and ball milling methods. Band gap energies of α-BiNbO{sub 4} and β-BiNbO{sub 4} were estimated by UV–vis diffuse reflectance spectroscopy (DRS) as 3.2–3.4 eV, which are higher than experimental values reported in the literature. The materials were evaluated in the methyl orange azo-dye photo-discoloration under UV irradiation and complete bleach was attained. The triclinic phase presented a better efficiency as a photocatalyst than the orthorhombic phase. Unexpectedly, the mixture of both phases resulted in the highest photocatalytic efficiency, similar to that found for Degussa P25 commercial catalyst.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Edge treatment for spurious mode suppression in thin-film lithium niobate resonators

Abstract Thin-film lithium niobate is an attractive material for RF acoustic devices because of its high electromechanical coupling. However, due to the large coupling and the high anisotropy, thin-film lithium niobate resonators are prone to accidental resonances called spurious modes. These modes compromise the frequency response of the resonators, limiting their use in filter and oscillator applications. In this work, we present a novel method of spurious mode suppression through a special edge treatment etch process. Two thin-film lithium niobate resonators were fabricated, one with smooth sidewalls and one with the edge treatment. It was found that the edge-treated resonators show a weaker spurious mode response. This is potentially a new way to mitigate spurious resonances, a major issue in lithium niobate Lamb wave devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Thermal Modulation of Gigahertz Surface Acoustic Waves on Lithium Niobate

Surface-acoustic-wave (SAW) devices have a wide range of applications in microwave signal processing. Microwave SAW components benefit from higher quality factors and much smaller crosstalk when compared to their electromagnetic counterparts. Efficient routing and modulation of SAWs are essential for building large-scale and versatile acoustic wave circuits. Here, we demonstrate integrated thermoacoustic modulators using two SAW platforms: bulk lithium niobate and thin-film lithium niobate on sapphire. In both approaches, the gigahertz-frequency SAWs are routed by integrated acoustic waveguides, while on-chip microheaters are used to locally change the temperature, and thus, control the phase of the SAW. Using this approach, we achieve phase changes of over 720° with the responsibility of 2.6°/mW for bulk lithium niobate and 0.52°/mW for lithium niobate on sapphire. Furthermore, we demonstrate amplitude modulation of SAWs using acoustic Mach-Zehnder interferometers. Our thermoacoustic modulators can enable reconfigurable acoustic signal processing for next-generation wireless communications and microwave systems.

42 ENGINEERING↗