Search NASA⌕ Search

SEARCH · Search NASA

Results for “NIOBIUM 100”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Nuclear Data Sheets for A = 100

The evaluated experimental data are presented for 15 known nuclides of mass 100 (Kr, Rb, Sr, Y, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Ag, Cd, In, Sn). High spin excitations are known for {sup 100}Sr, {sup 100}Zr, {sup 100}Mo, {sup 100}Tc, {sup 100}Ru, {sup 100}Rh, {sup 100}Pd, {sup 100}Ag, and {sup 100}Cd. The neutron capture data are available for {sup 100}Tc and {sup 100}Ru. Particle transfer data exist for structures in {sup 100}Nb, {sup 100}Mo, {sup 100}Tc and {sup 100}Ru. The two-neutrino {beta}{beta} decay mode in {sup 100}Mo is fully established with measured half-life and population of the g.s. and 1130,0+ state in {sup 100}Ru. The absolute energy of the isomer in {sup 100}Nb is now well established from recent Penning-trap mass measurements. Excited state data are nonexistent for {sup 100}Kr, {sup 100}Rb and {sup 100}Sn; and only one excited state is known in {sup 100}In. Except for isotopic identification, no information is available for the decay of the {sup 100}Kr isotope and very little is known about the decay properties of the {sup 100}Sn isotope. In the case of {sup 100}Pd, there are many recent studies of high-spin structures but the agreement in the orderings of the {gamma}-ray cascades and {gamma}-ray inventory between various studies remains poor at high (>9 MeV) excitation energies. The energy difference between the g.s. an isomer in {sup 100}Y has recently been precisely measured in Penning-Penning-trap mass measurements, however, the assignments of the two previously known half-lives and J{pi}'s to the respective states (g.s. and the 145-keV isomer) in {sup 100}Y remains to be established. Static moments in {sup 100}Y have also been recently measured for one of these states in {sup 100}Y but it is not definitely known as to which of the two states (g.s. or the isomer) is connected with these measurements. This work supersedes earlier full evaluations of A = 100 by 1997Si09, 1990Si05 and 1974Ko37.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Exclusive photoproduction of f{sub 1}(1285) meson off the proton in kinematics available at the Jefferson Laboratory experimental facilities

We calculated the exclusive f{sub 1}(1285) meson photoproduction cross section at an energy of a few GeV within the Regge approach. The calculation shows that the cross section is sizable, being in the range of 100 nb, and much larger than the expected cross section of the {eta}(1295) meson photoproduction at the same energy. These two facts make it possible to use this reaction to study the poor known properties of the f{sub 1}(1285) meson in the JLab kinematics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Undercooling of niobium-germanium alloys in a 100 meter drop tube

The undercoolings of pure Nb and Nb-Ge alloys are examined using the 100-m drop tube of the Marshall Space Flight Center. The temperatures of the samples prior to release were measured, and IR detectors were utilized to monitor recalescence from solidification. It is observed that the Nb and Nb-Ge samples undercooled to the homogeneous nucleation limit. The data reveal that all the samples displayed a dendritic primary phase, except for alloys nucleating in the beta-phase field, which had a cellular phase. The composition of these phases are studied using EDXA; it is detected that the composition of the phases corresponds to the Jorda (1978) phase diagram.

Hofmeister, W. H.↗

An ultra-fast superconducting Nb nanowire single-photon detector for soft x-rays

Although superconducting nanowire single-photon detectors (SNSPDs) are well studied regarding the detection of infrared/optical photons and keV-molecules, no studies on continuous x-ray photon counting by thick-film detectors have been reported so far. We fabricated a 100 nm thick niobium x-ray SNSPD (an X-SNSPD) and studied its detection capability of photons with keV-energies in continuous mode. The detector is capable to detect photons even at reduced bias currents of 0.4%, which is in sharp contrast to optical thin-film SNSPDs. No dark counts were recorded in extended measurement periods. Strikingly, the signal amplitude distribution depends significantly on the photon energy spectrum.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructures of niobium-germanium alloys processed in inert gas in the 100 meter drop tube

The 100 meter drop tube at NASA's Marshall Space Flight Center has been used for a series of experiments with niobium-germanium alloys. These experiments were conducted with electromagnetic levitation melting in a 200 torr helium environment. Liquid alloys experienced large degrees of undercooling prior to solidification in the drop tube. Several interesting metastable structures were observed. However, the recalescence event prevented extended solid solubility of germanium in the A-15 beta phase. Liquids of eutectic composition were found to undercool in the presence of solid alpha and solid Nb5Ge3.

Bayuzick, R. J.↗

Observation of High Field Q-Slope in 3 GHz Nb Cavities

A degradation of the unloaded quality factor is commonly observed above about 100 mT in elliptical niobium cavities. The cause of this degradation has not been fully understood yet, but the empirically found solution of heating to about 100-120 C for 24-48 hrs. eliminates the degradation in electropolished fine grain or large grain niobium cavities. While numerous experiments related to this phenomenon have been done at 1.3 GHz and 1.5 GHz, little data exists at other frequencies, and the frequency dependence of this degradation is not clear. We have measured the unloaded quality factor of 3 GHz fine grain niobium cavities, which were chemically polished as the final treatment before RF tests in a vertical Dewar and observed the characteristic degradation in two cavities. The measurement of the quality factor degradation at different bath temperatures points to a field-dependent rather than a temperature-related effect.

Eremeev, Grigory V.↗

Chemical Analysis of Tantalum Thin Films compared to Niobium Thin Films using SIMS and XPS

Superconducting qubits are a leading platform for quantum computation. These circuits are typically made from superconducting materials like aluminum or niobium. However, the amorphous niobium oxide and aluminum oxide on the surface of these circuits introduce considerable RF loss due to the presence of two-level systems (TLS), which limits the maximum coherence times T1 to ~100 μs. Capping the niobium qubits with a tantalum layer leads to a 3- 5x improvement [Bal et al., 2024]. But even in this case, tantalum forms an amorphous surface oxide that introduces loss. In an effort to devise strategies to eliminate the presence of this oxide, we present a comprehensive study on the nature of Ta oxide using x-ray photoemission spectroscopy (XPS) and secondary ion mass spectrometry (ToF-SIMS) as a function of heat treatment. The thin films were annealed in ultra-high vacuum conditions and analyzed in situ to characterize the composition and evolution of the native tantalum oxide layer and oxide-metal interface. Our analysis reveals two critical differences between tantalum and niobium oxides: Nb2O5 completely dissolves at 400°C, while Ta2O5 persists even at 800°C. Additionally, tantalum oxide contains only a single suboxide (TaO), in contrast to niobium's two suboxides (NbO and NbO2). The suboxide of tantalum contributes minimally to the total oxide content and shows a relative increase with temperature. Understanding the oxide’s behavior will open new pathways for optimizing coherence times in tantalum qubits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of metal encapsulation on bulk superconducting properties of niobium thin films used in qubits

Niobium metal occupies nearly 100% of the volume of a typical 2D transmon device. While the aluminum Josephson junction is of utmost importance, maintaining quantum coherence across the entire device means that pair-breaking in Nb leads, capacitive pads, and readout resonators can be a major source of decoherence. The established contributors are surface oxides and hydroxides, as well as absorbed hydrogen and oxygen. Metal encapsulation of freshly grown surfaces with non-oxidizing metals, preferably without breaking the vacuum, is a successful strategy to mitigate these issues. While the positive effects of encapsulation are undeniable, it is important to understand its impact on the macroscopic behavior of niobium films. We present a comprehensive study of the bulk superconducting properties of Nb thin films encapsulated with gold and palladium/gold, and compare them to those of bare Nb films. Magneto-optical imaging, magnetization, resistivity, and London and Campbell penetration depth measurements reveal significant differences in encapsulated samples. Both sputtered, and epitaxial Au-capped films exhibit the highest residual resistivity ratio and superconducting transition temperature, as well as the lowest upper critical field, London penetration depth, and critical current. These results are in good agreement with the microscopic theory of anisotropic normal and superconducting states of Nb. We conclude that pair-breaking in the bulk of niobium films, driven by disorder throughout the film rather than just at the surface, is a significant source of quantum decoherence in transmons. We also conclude that gold capping not only passivates the surface but also affects the properties of the entire film, significantly reducing the scattering rate due to defects likely induced by surface diffusion if the film is not protected immediately after fabrication.

Datta, Amlan [Ames Lab; Iowa State U.]↗

Frequency-tunable superconducting resonators via nonlinear kinetic inductance

We have designed, fabricated, and tested a frequency-tunable high-Q superconducting resonator made from a niobium titanium nitride film. The frequency tunability is achieved by injecting a DC through a current-directing circuit into the nonlinear inductor whose kinetic inductance is current-dependent. We have demonstrated continuous tuning of the resonance frequency in a 180 MHz frequency range around 4.5 GHz while maintaining the high internal quality factor Q{sub i} > 180 000. This device may serve as a tunable filter and find applications in superconducting quantum computing and measurement. It also provides a useful tool to study the nonlinear response of a superconductor. In addition, it may be developed into techniques for measurement of the complex impedance of a superconductor at its transition temperature and for readout of transition-edge sensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modification of the {omega} meson properties in the nuclear medium

We have investigated the in-medium modifications of {omega} mesons in photoproduction experiments using the Crystal Barrel(CB)/TAPS detector system at the ELSA accelerator facility in Bonn. The {omega}-mesons were reconstructed using the {omega}{yields}{pi}{sup 0}{gamma} channel. In a first analysis of the data set on a Nb target, published by Trnka et al. [Phys. Rev. Lett. 94(2005) 192303], evidence for an in-medium mass shift of the {omega}-meson was deduced from the observed {omega} line shape. The extracted signal shape was, however, found to be sensitive to the background subtraction. For this reason a re-analysis of the same data set was initiated with the goal to reduce the background and to deduce the shape and the absolute magnitude of the background directly from the data. Here we present recent results from this re-analysis. The omega signal resulting after background subtraction has been compared to different scenarios of GiBUU transport model calculations for the full incident photon energy range (900-2200 MeV) and near the production threshold (900-1300 MeV).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modification of the {omega}-Meson Lifetime in Nuclear Matter

Information on hadron properties in the nuclear medium has been derived from the photoproduction of {omega} mesons on the nuclei C, Ca, Nb, and Pb using the Crystal Barrel/TAPS detector at the ELSA tagged photon facility in Bonn. The dependence of the {omega}-meson cross section on the nuclear mass number has been compared with three different types of models: a Glauber analysis, a Boltzmann-Uehling-Uhlenbeck analysis of the Giessen theory group, and a calculation by the Valencia theory group. In all three cases, the inelastic {omega} width is found to be 130-150 MeV/c{sup 2} at normal nuclear matter density for an average 3-momentum of 1.1 GeV/c. In the rest frame of the {omega} meson, this inelastic {omega} width corresponds to a reduction of the {omega} lifetime by a factor {approx_equal}30. For the first time, the momentum dependent {omega}N cross section has been extracted from the experiment and is in the range of 70 mb.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Insight to the Duration of 120 °C Baking on the Performance of SRF Niobium Cavities

Low-temperature baking at 100 °C - 140 °C in ultra-high vacuum for several hours is the final cavity processing technique to achieve the highest accelerating gradient cavity by eliminating the high field Q-slope, typically on cavities made of high purity fine grain niobium and subjected to electropolishing. The temperature and duration of baking control the onset of the high field Q-slope and overall quality factor over the baseline measurements. The increase in quality factor is generally related to the reduction in the temperature-dependent surface resistance, which refers to BCS surface resistance due to the reduction in the electronic mean free path and elimination of high field Q-slope is still being actively investigated. Here, we present the results of a series of measurements on 1.3 GHz TESLA shape single-cell cavities with successive low-temperature baking at 120 °C up to 96 hours. The rf loss related to the trapping of residual magnetic field refer to flux trapping sensitivity was measured with respect to the duration of 120 °C bake.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dissipative hydride precipitates in superconducting niobium cavities

We report the first direct observation of the microstructural features exhibiting RF losses at high surface magnetic fields of above 100 mT in field emission free superconducting niobium cavities. The lossy areas were identified by advanced thermometry. Surface investigations using different techniques were carried out on cutout samples from lossy areas and showed the presence of dendritic niobium hydrides. This finding has possible implications to the mechanisms of RF losses in superconducting niobium at all field levels.

43 PARTICLE ACCELERATORS↗

Investigation of NbN x Thin Films and Nanoparticles Grown by Pulsed Laser Deposition and Thermal Diffusion

Niobium nitride films (NbN x ) were grown on Nb and Si (100) substrates using pulsed laser deposition (PLD), laser heating, and thermal diffusion methods. Niobium nitride films were deposited on Nb substrates using PLD with a Q-switched Nd: YAG laser (λ = 1064 nm, 40 ns pulse width, and 10 Hz repetition rate) at different laser fluences, different nitrogen background pressures and deposition temperatures. The effect of changing PLD parameters for films done by PLD was studied. The seen observations establish guidelines for adjusting the laser parameters to achieve the desired morphology and phase of the grown NbN x films. When the fabrication parameters are fixed, except for laser fluence, surface roughness, deposition rate, nitrogen content, and grain size increases with increasing laser fluence. Increasing nitrogen background pressure leads to change in the phase structure of the NbN x films from mixed -Nb 2 N and cubic δ-NbN phases to single hexagonal β-Nb 2 N. A change in substrate temperature led to a pronounced change in the preferred orientation of the crystal structure, the phase transformation, surface roughness, and composition of the films. The structural, electronic, and nanomechanical properties of niobium nitride PLD deposited at different nitrogen pressures (26.7-66.7 Pa) on Si(100) were investigated. The NbN x , films exhibited a cubic δ-NbN with a strong (111) orientation. A correlation between surface morphology, electronic, and superconducting properties was found. The highly-textured δ-NbN films have a T c up to 15.07 K. The film was deposited at a nitrogen background pressure of 66.7 Pa exhibited improved superconducting properties and showed higher hardness values as compared to films deposited at lower nitrogen pressures. NbN nanoclusters that were deposited on carbon coated Cu-grids using PLD at laser fluence of 8 J/cm 2 were observed. Niobium nitride is prepared by heating of Nb sample in a reactive nitrogen atmosphere (133 Pa) at a temperature of 900 °C. The results suggest that the niobium nitride was crystalline in the single phase of hexagonal β-Nb 2 N. As heating time increased, film growth continued with improvement in hardness and modulus. The XRD of samples prepared by a thermal diffusion method at low nitrogen pressure and high temperatures were reported. The samples were prepared at temperatures ranging from 1250-1500 °C. 2D-XRD images of samples, processed at temperature range from 1250 -1500 °C at pressure of 1.3×10 -3 Pa, showed the formation of an α phase. As pressure increased to 0.13 Pa, an α-NbN phase mixed with β-Nb 2 N phase appeared. Niobium nitride samples were prepared by laser nitridation using a Q-switched Nd: YAG nanosecond laser and Ti: sapphire femtosecond lasers. The effects of laser fluence on the formed phase, surface morphology, and electronic properties of the NbN x were investigated. Samples were prepared using Nd: YAG laser are of NbN x in the cubic δ-NbN phase. The femtosecond laser-nitrided samples were prepared by different laser fluences of 0.1-1.3 mJ/cm 2 at 4.0×10 4 Pa nitrogen pressure. NbN x samples with mixedα, β and δ phases were observed. The cubic δ-NbN structure is dominated over the other two phases.

Farha, Ashraf Hassan↗

MAGNETIC FLUX EXPULSION IN SUPERCONDUCTING RADIO-FREQUENCY NIOBIUM CAVITIES MADE FROM COLD WORKED NIOBIUM

Trapped residual magnetic field during the cool down of superconducting radio frequency (SRF) cavities is one of the primary sources of RF residual losses leading to lower quality factor. Historically, SRF cavities have been fabricated from high purity fine grain niobium with grain size ~50 to 100 µm as well as large grain with grain size of the order of few centimeters. Non-uniform recrystallization of fine-grain Nb cavities after the post fabrication heat treatment leads to higher flux trapping during the cool down, and hence the lower quality factor. We fabricated two 1.3 GHz single cell cavities from cold-worked niobium from different vendors and processed along with cavities made from SRF grade Nb. The flux expulsion and flux trapping sensitivity were measured after successive heat treatments in the range 800 to 1000°C. The flux expulsion from cold-worked fine-grain Nb cavities improves after 800°C/3h heat treatments and it becomes similar to that of standard fine-grain Nb cavities when the heat treatment temperature is higher than 900°C.

Khanal, B. D.↗

MAGNETIC FLUX EXPULSION IN SUPERCONDUCTING RADIO-FREQUENCY NIOBIUM CAVITIES MADE FROM COLD WORKED NIOBIUM

Trapped residual magnetic field during the cool down of superconducting radio frequency (SRF) cavities is one of the primary sources of RF residual losses leading to lower quality factor. Historically, SRF cavities have been fabricated from high purity fine grain niobium with grain size ~50 to 100 µm as well as large grain with grain size of the order of few centimeters. Non-uniform recrystallization of fine-grain Nb cavities after the post fabrication heat treatment leads to higher flux trapping during the cool down, and hence the lower quality factor. We fabricated two 1.3 GHz single cell cavities from cold-worked niobium from different vendors and processed along with cavities made from SRF grade Nb. The flux expulsion and flux trapping sensitivity were measured after successive heat treatments in the range 800 to 1000°C. The flux expulsion from cold-worked fine-grain Nb cavities improves after 800°C/3h heat treatments and it becomes similar to that of standard fine-grain Nb cavities when the heat treatment temperature is higher than 900°C.

Khanal, B. D.↗

Substitution features in the isomorphous replacement series for metal-organic compounds (Nb{sub x}Ta{sub 1-x}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2}, x=0.7, 0.5, 0.3-Single-source precursors of complex oxides with organized porosity

Trimetallic oxoalkoxide complexes (Nb{sub 0.7}Ta{sub 0.3}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (I), (Nb{sub 0.3}Ta{sub 0.7}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (II) and (Nb{sub 0.5}Ta{sub 0.5}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (III) were obtained by the interaction of rhenium heptoxide (VII) Re{sub 2}O{sub 7} with niobium and tantalum alkoxides M{sub 2}(OMe){sub 10} (M=Nb, Ta) in toluene. The centrosymmetric molecules (I)-(III) can be considered as a product of condensation of two M{sub 2}(OMe){sub 9}(OReO{sub 3}) molecules with the formation of two oxo-bridges. The specific feature of the structure is the uneven distribution of metal atoms in the crystallographic positions, where one symmetry-independent position, connected via {mu}-O with a perrhenate ReO{sub 4}{sup -} group, is predominantly occupied by niobium atoms, while the other one connected via alkoxide groups has a higher tantalum content. The distribution of Nb and Ta in the structure is truly even only for compound III. The niobium and tantalum content is varied to a different extent for I (less) and for II (more), which is apparently due to small differences in the sizes of these two cations, resulting in preferences for packing of different molecules in the structures. Thermal decomposition of (Nb{sub 1-x}Ta{sub x}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (x=0.3, 0.5, 0.7) in air leads to the formation of crystalline species of solid solutions based on tantalum and niobium oxides displaying semi-ordered pores with the size of 100-250 nm. In the dry nitrogen atmosphere, the decomposition leads to the amorphous complex oxides containing rhenium, niobium and tantalum. - Graphical abstract: Thermal decomposition of (Nb{sub 1-x}Ta{sub x}){sub 4}O{sub 2}(OMe){sub 14}(ReO{sub 4}){sub 2} (x=0.3, 0.5, 0.7), single-source complex precursors, in air leads to the formation of crystalline solid solutions based on tantalum and niobium oxides, displaying semi-ordered pores with the size of 100-250 nm. In the dry nitrogen atmosphere, the decomposition leads to the formation of amorphous complex oxides containing rhenium, niobium and tantalum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Silicidation of Niobium Deposited on Silicon by Physical Vapor Deposition

Niobium was deposited by physical vapor deposition (PVD) using e-beam evaporation on bare (100) silicon substrates and SiO2 surfaces. The formation of niobium silicide was investigated by annealing PVD Nb films in the temperatures range 400–1000°C. At all elevated annealing temperatures the resistivity of Nb silicide is substantially higher than that of Nb. The Nb silicidation as a function of temperature has been investigated and different NbXSiy compounds have been characterized. It has been observed that the annealing of the Nb film on Si is accompanied by a strong volume expansion of about 2.5 of the resulting reacted film. The films' structural properties were studied using X-Ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), and atomic force microscopy (AFM), which was not previously presented in the context of the extant NbSi literature. The X-Ray diffraction characterization of the Nb on Si sample annealed at 1000°C, showed the presence of hexagonal Nb5Si3 phases, with a dominant peak at the (200) plane, and NbSi2 phases. Fractal dimension calculations indicate a distinct transition from Stranski-Krastanov to Volmer-Weber film growth for NbSi formation at the annealing temperature of 600°C and above.

36 MATERIALS SCIENCE↗