SEARCH · Search NASA

Results for “NMP”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Can Greener Cyrene Replace NMP for Electrode Preparation of NMC 811 Cathodes?

N-methyl-2-pyrrolidone (NMP) is the normally used solvent for cathode processing in lithium battery field. However, its high toxicity attracted more and more environmental scrutiny and was restricted by many chemical legislations in industry applications. So, it is necessary to find a greener and safer alternative to replace it. Dihydrolevoglucosenone (Cyrene), a newly reported green dipolar aprotic solvent, has very similar solvent properties as NMP, making it a very attractive candidate. The possibility to use Cyrene to replace NMP for NMC 811 cathode fabrication was studied. Although PVDF binder has very poor solubility in Cyrene at room temperature, increasing temperature can significantly change this. High temperature (above 80 °C) electrode processing with Cyrene gives promising performance, which is comparable to the conventional NMP fabricated electrode. A proof of principle was provided: Cyrene can be a good green alternative to replace NMP. So, the positive results reported here may also lead to a search for more Cyrene-like green solvents that have a higher solubility for PVDF, or of PVDF-like binders that are more soluble in Cyrene, to help making the electrode processing much greener.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Effect of overcharge on Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 cathodes: NMP-soluble binder. II — Chemical changes in the anode

For this study, cells based on nickel manganese cobalt oxide (NMC)/graphite electrodes, which contained polyvinylidene difluoride (PVDF) binders in the electrodes, were systematically charged to 100, 120, 140, 160, 180, and 250% state of charge (SOC). Characterization of the anodes by inductively-coupled-plasma mass spectrometry (ICP-MS), X-ray photoelectron spectroscopy (XPS), and high-performance liquid chromatography coupled with electrospray ionization mass spectrometry (HPLC-ESI-MS) showed several extent-of-overcharge-dependent trends. The concentrations (by wt) of nickel, manganese, and cobalt in the negative electrode increased with SOC, but the metals remained in the same ratio as that of the positive. Electrolyte reaction products, such as LiF:LiPO 3 , increased with overcharge, as expected. Three organic products were found by HPLC-ESI-MS. From an analysis of the mass spectra, two of these compounds seem to be organophosphates, which were formed by the reaction of polymerized electrolyte decomposition products and PF 3 or O=PF 3 . Their concentration tended to reach a constant ratio. The third was seen at 250% SOC only.

25 ENERGY STORAGE↗

DOE OSTI2025

High-Energy and High-Power NMP-Free, Designer NMC 811 Cathodes with Ultra-Thick Architectures Processed by Electrophoretic Deposition

This project focused on electrode engineering and reducing the weight of inactive components in the battery cells. Additionally, the project focused on optimizing the ‘electrophoretic deposition’ technique developed by PPG industries for aqueous processing of electrodes. During this project team has screened several binders suitable for electrophoretic deposition of electrodes. Additionally, we developed a nice strategy to deposit a low cost and scalable oxide coating on the surface of cathode materials. ORNL team performed the research under this CRADA at DOE’s Battery Manufacturing Facility (BMF) at ORNL.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2025

High-Energy and High-Power NMP-Free, Designer NMC 811 Cathodes with Ultra-Thick Architectures Processed by Electrophoretic Deposition

25 ENERGY STORAGE↗

DOE OSTI2020

Effect of binder on the overcharge response in LiFePO 4 -containing cells

Two types of small pouch cells based on LiFePO 4 /graphite, one containing a N-methyl pyrrolidinone (NMP)-soluble binder, poly(vinylidene difluoride), and the other an aqueous-soluble binder, styrene-butadiene rubber/carboxymethylcellulose were systematically charged to 100, 120, 140, 160, 180, and 250% state of charge (SOC). The cells were then discharged to 3.0 V at room temperature before being disassembled for postmortem analysis. Microstructural changes in the anode associated with increasing SOC were more pronounced in the aqueous processed cells in comparison to the NMP-processed cells. Dendrite formation was observed on the aqueous-processed anode at 120% SOC, while the NMP-processed anode surface does not show dendrites until 250% SOC. Overall, the aqueous-processed anode surfaces displayed more evidence of microstructural degradation as a function of increasing SOC. In the NMP-processed cells, four organic compounds on the anode surface were found to show a dependence on SOC, while only two displayed a similar dependency in the aqueous-processed cells. The nature of the binder changed the number and composition of the species found at the anode.

25 ENERGY STORAGE↗

DOE OSTI2020

Towards Understanding of Cracking during Drying of Thick Aqueous-Processed LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathodes

Replacing N-methyl-2-pyrrolidone (NMP) with water for processing of lithium-ion battery (LIB) electrodes has both cost and environmental benefits, which include reduced drying time, lower dryer capital cost, elimination of NMP recovery capital equipment, and no release of volatile organic compounds (VOCs) into the environment. However, aqueous-processed thick cathodes (≳4 mAh/cm 2 ) typically exhibit detrimental cracking during drying that is not observed for the NMP-based counterpart. The reasons for cracking of these water-based thick electrodes are still not well understood due to the complex nature of the colloidal dispersions used in the LIB electrode processing steps. In this work, the contributions of various factors responsible for cracking are discussed. We show that eliminating hydrogen evolution due to corrosion of the aluminum current collector eliminated the majority of the cracks regardless of the coating thickness, identifying the gas evolution as the primary reason for electrode cracking. Some secondary cracks and pinhole-type defects remained after addressing the aluminum current collector corrosion, which are thought to be caused by an inferior binding network formed by carbon black and binder in aqueous-processed cathodes compared to those processed with NMP. The thick aqueous processed cathodes are not able to sufficiently withstand the drying stresses without crack formation. We demonstrate reduction of these secondary defects by either improving the binding network or by reducing the drying stress. The former was achieved by replacing carbon black with vapor grown graphite tubes (VGGTs) that caused a more efficient utilization of the emulsion binder. Here, the latter was achieved by adding a small amount of IPA as a co-solvent that has been shown to reduce capillary stresses.

25 ENERGY STORAGE↗

DOE OSTI2023

Rheo-electric measurements of carbon black suspensions containing polyvinylidene difluoride in N -methyl-2-pyrrolidone

Lithium-ion battery cathode slurries have a microstructure that depends sensitively on how they are processed due to carbon black's (CB) evolving structure when subjected coating flows. While polyvinylidene difluoride (PVDF), one of the main components of the cathode slurry, plays an important role in modifying the structure and rheology of CB, a quantitative understanding is lacking. In this work, we explore the role of PVDF in determining the structural evolution of Super C65 CB in N-methyl-2-pyrrolidinone (NMP) with rheo-electric measurements. We find that PVDF enhances the viscosity of NMP resulting in a more extensive structural erosion of CB agglomerates with increasing polymer concentration and molecular weight. We also show that the relative viscosity of all suspensions can be collapsed by the fluid Mason number (Mnf), which compares the hydrodynamic forces imposed by the medium to cohesive forces holding CB agglomerates together. Using simultaneous rheo-electric measurements, we find at high Mnf, the dielectric strength (Δε) scales with Mnf, and the power-law scaling can be quantitatively predicted by considering the self-similar break up of CB agglomerates. The collapse of the relative viscosity and scaling of Δε both suggest that PVDF increases the hydrodynamic force of the suspending medium without directly changing the CB agglomerate structure. These findings are valuable for optimizing the rheology of lithium ion battery cathode slurries. We also anticipate that these findings can be extended to understand the microstructure of similar systems under flow.

Mechanics↗

DOE OSTI2018

Coordination polymers based on zinc(II) and manganese(II) with 1,4-cyclohexanedicarboxylic acid

Three new metal-organic coordination polymers were obtained namely, [Mn{sub 3}(chdc){sub 3}-(NMP){sub 2}(DMF){sub 2}] (1, chdc{sup 2–} is trans-1,4-cyclohexanedicarboxylate, NMP is N-methylpyrrolidone, DMF is N,N-dimethylformamide), [Zn{sub 3}(chdc){sub 3}(NMP){sub 2}]•2NMP (2), and [Zn{sub 3}(chdc){sub 3}(ur)-(DMF){sub 0.5}]•DMF (3, ur is the urotropine). The crystal structures of polymers 1, 2, and 3 were determined by single-crystal X-ray crystallography. All three compounds were found to contain a trinuclear secondary building unit {M_3(OOC)_6}. Coordination polymers 1 and 2 have a layered structure, while polymer 3 has a three-dimensional coordination framework with isolated pores formed due to the presence of urotropine bridging molecules. Compounds 1 and 3 were characterized by IR spectroscopy, thermogravimetric and elemental analysis data, powder X-ray diffraction. Compound 3 was also characterized by UV-Vis diffuse reflectance spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2019

Metal-organic frameworks based on magnesium(II): adsorption and luminescence properties

Two new metal-organic frameworks based on magnesium(II) ions, [Mg{sub 4}(bdc){sub 3}(dma){sub 6}(NO{sub 3}){sub 2}]•DMA (1; bdc is 1,4-benzenedicarboxylate; dma, DMA is N,N-dimethylacetamide) and [Mg{sub 3}(bpdc){sub 3}(nmp){sub 4}] (2; bpdc is 4,4´-biphenyldicarboxylate; nmp is N-methylpyrrolidone), were synthesized in DMA or NMP, respectively. According to the single-crystal X-ray diffraction data, compound 1 is built of binuclear carboxylate units {Mg_2(O_2CR)_3}, which were previously not observed in metal-organic frameworks. Compound 2 is based on trinuclear carb oxylate units {Mg_3(O_2CR)_6}. Compound 1 has a layered structure (hcb topology), whereas compound 2 has a distorted three-dimensional cubic structure (pcu topology). The phase purity and chemical identity of the compounds were confirmed by IR spectroscopy, thermogravimetry, elemental analysis, and powder X-ray diffraction. Photoluminescence properties of both compounds are indicative of intraligand charge-transfer transitions of one (for 1) or two (for 2) types. Textural characteristics of an activated sample of 1 were measured by nitrogen and hydrogen adsorption at 77 K and by carbon dioxide adsorption at 195 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

A cradle-to-grave life-cycle-assessment of dry-processed Li-ion batteries for electric vehicles

Maxwell-type dry processing has emerged as a promising manufacturing technology for high-areal-loading Li-ion battery electrodes, offering a significant advantage by eliminating the use of the toxic and costly NMP solvent. This study developed a cradle-to-grave life-cycle-assessment model to evaluate the environmental impacts of this innovative technology, benchmarking the results against the conventional NMP-based technique for a configured 42 kWh NMC622-graphite battery pack. Furthermore, the findings reveal that the dry-processing method merits a 4.8% lower energy consumption and achieves environmental impacts up to 47.5% lower in 12 out of 13 categories, highlighting its environmental benefits compared with the NMP-based manufacturing processes.

Electrode↗

DOE OSTI2022

Investigating the impact of micropore volume of aminosilica functionalized SBA-15 on catalytic activity for amine-catalyzed reactions

Mesoporous materials such as SBA-15 are used in many applications since the materials are robust and have tunable properties. Whereas these materials are thought to be ideal, the materials are complex with the common synthesis methods producing materials that contain micropores. This work will investigate the impact of micropores on catalytic activity of aminosilica materials. For comparison, materials are formed using a standard method that produces materials with micropores (REG-SBA-15) and using a modified method that produces materials with negligible micropore volume (NMP-SBA-15). After grafting the calcined support with an aminosilane (either (N-methyl amino propyl) trimethoxy silane (denoted as 2°Am) or (N,N-diethyl-3-amino propyl) trimethoxy silane (3°Am)), catalytic testing experiments reveal that NMP-SBA-15 functionalized materials are more active than REG-SBA-15 functionalized materials for a range of reactions. The reactions include (a) glucose isomerization where amines interacting with surface silanols limit catalytic activity and (b) aldol and Knoevenagel chemistry where amine-silanol interactions increase the reaction rate. For aldol chemistry, the observed difference in rate is further investigated using site quantification experiments. Interestingly, the results reveal that three types of sites exist for each material, including sites that are (1) highly active, (2) intermediate active, and (3) inactive. Additionally, NMR experiments indicate that amines immobilized on REG-SBA-15 supports are less mobile than amines on NMP-SBA-15. For REG-SBA-15, the materials are found to have aminosilanes that have limited mobility and the largest fraction of inactive sites, which suggests that the inactive catalytic sites are in the micropores. Overall, the design of highly active catalytic materials can be achieved using materials that have limited micropore volumes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Chain Conformations of TEMPO-Based Organic Radical Polymers with Varying Radical Loading and Temperature in Battery-Relevant Solvents

Poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) (PTMA) is an organic radical polymer that is a promising active material in organic batteries. The proximity of the radical groups impacts the nature of charge transfer, in which closer packing promotes electron exchange; however, the chain conformation of PTMA is not well understood. Here, the conformation of PTMA in, and its thermodynamic interactions with, battery-relevant solvents is determined using small-angle neutron scattering (SANS). N-methyl-2-pyrrolidone (NMP) and 50:50 (wt %) ethylene carbonate/dimethyl carbonate (EC/DMC) mixtures with PTMA of varying radical content (68 vs 98%) and temperature (25 and 60 °C) are examined. Both solvents are theta solvents for PTMA irrespective of radical loading and temperature. PTMA attains an expanded chain conformation in NMP and a more compact polymer chain conformation in EC/DMC. Lastly, the electrochemical performance of PTMA films formed from EC/DMC shows improved performance relative to those cast from NMP, which is interpreted to indicate that the compact conformation of PTMA in EC/DMC enables improved inter- and intrachain charge transfer.

25 ENERGY STORAGE↗

DOE OSTI2022

In-Situ Liquid Cell Transmission Electron Microscopy of Nanoparticles from Spent Nuclear Fuel

Noble Metal Particles (NMP) that are present in SNF play an important role in the Fuel Matrix Degradation (FMD) Model that is being considered for predicting the release rate of radionuclides from a waste package. Previous characterization of chemically separated NMP from SNF showed that these were well-crystallized nanoparticles containing Mo, Tc, Ru, Rh, and Pd with some evidence of actinides. These same chemically separated particles were re-characterized following 10 years of storage as the separated material in water. Scanning Transmission Electron Microscopy (STEM) analysis revealed that significant alteration had occurred in this material during storage, resulting in the almost complete degradation of the NMP. We hypothesized that radiolytic damaged had occurred in the material. To support these concepts, we synthesized a mixed Ru-Pd nanoparticle and subjected it to irradiation in the electron microscope in an in-situ liquid cell. We demonstrated that intense radiation can lead to the decomposition of these metallic particles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2018

Modeling and analysis of solvent removal during Li-ion battery electrode drying

In this paper, we study the design aspects and process dynamics of solvent removal from Lithium-ion battery electrode coatings. For this, we use a continuum level mathematical model to describe the physical phenomenon of cathode drying involving coupled simultaneous heat and mass transfer with phase change. Our results indicate that around 90% of solvent is removed in less than half of the overall drying time. We study the effect of varying temperature and air velocity on the drying process. We show that the overall drying energy can be reduced by at least 50% by using a multi-zone drying process. Also, the peak solvent flux can be reduced by at least 40%. We further present the effect of using an aqueous solvent instead of N-Methyl-2-pyrrolidone (NMP) in electrode drying. Our results indicate that Water dries nearly 4.5 times faster as compared to NMP and requires nearly 10 times less overall drying energy per kg of solvent.

25 ENERGY STORAGE↗

DOE OSTI2021

Enabling aqueous processing for LiNi 0.80 Co 0.15 Al 0.05 O 2 (NCA)-based lithium-ion battery cathodes using polyacrylic acid

Replacing N-methyl-2-pyrrolidone (NMP) with water in the production of lithium-ion battery cathodes is critical to realizing process cost savings and improved worker safety. LiNi 0.80 Co 0.15 Al 0.05 O 2 (NCA) is a poor fit for aqueous processing due to destructive Al current collector corrosion resulting from highly basic slurries and detrimental surface reconstruction reactions that occur in water. In this study, polyacrylic acid (PAA, MW = 450,000 g·mol -1 ) is examined as a corrosion-mitigating and surface-stabilizing agent. Adding PAA to an aqueous NCA slurry can provide a stable pH (4.0–8.5) for at least 4 h, since the carboxyl groups from PAA dissociate and increase the proton concentration in the slurry. Further, these groups can also adsorb to the surface of NCA particles and provide electrostatic stability from active material particle agglomeration, as revealed by zeta potential measurements. Minor cracking does occur at the electrode surface; this cracking likely caused poorer adhesion to the Al current collector in the aqueous-processed film when compared to the NMP-processed baseline. Electrochemically, the leached Li does cause a lower initial capacity for the aqueous-processed cathode, though the capacity retention of the aqueous-processed cathode is better than the baseline. The cracks in the coating led to a rise in charge transfer resistance that hindered rate capability above 1C.

25 ENERGY STORAGE↗

DOE OSTI2019

Amino-functionalized graphene quantum dots (aGQDs)-embedded thin film nanocomposites for solvent resistant nanofiltration (SRNF) membranes based on covalence interactions

Solvent resistant nanofiltration (SRNF) membranes are highly demanded in processing organic solutions especially those contain large molecules with molecular weight between 200 to 2000 Da, yet they have some drawbacks such as relatively poor solvent resistance and low solvent permeance. The current work presented an innovative class of amino-functionalized graphene quantum dots (aGQDs) embedded thin film nanocomposites (TFN) for SRNF membranes which were prepared via interfacial polymerization (IP) and subsequent steps (chemical imidization, crosslinking, and solvent activation). The prepared membranes enabled covalent interactions not only between the IP skin layer and the substrate, but also between the IP layer and the embedded aGQDs. The ethanol permeance and surface porosity increased by 44% and 69%, respectively, with the embedment of aGQDs under the optimal conditions, while the Rhodamine B (RDB, 479 Da) rejection maintained essentially stable above 99%. Furthermore, our novel membranes exhibited excellent long-term stability, with a rejection of over 99% for Rose Bengal (RB, 1017 Da) during the continuous filtration of 100 mg L -1 RB/N,N-dimethyl formamide (DMF) solution at room temperature for more than 768 h. They also exhibited good organic solvent resistance and high-temperature tolerance in both DMF and NMP solvents, with a RDB rejection of over 99% and an ethanol permeance of about 38 L m -2 h -1 MPa -1 after being immersed in DMF at 80 °C for 248 h, and a RDB rejection of over 99% and an ethanol permeance of about 41 L m -2 h -1 MPa -1 after being immersed in NMP at 80 °C for 232 h. The results demonstrated that the aGQDs-embedded TFN OSN membrane has vast potential in SRNF applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Highly permeable polyethersulfone substrates with bicontinuous structure for composite membranes in CO 2 /N 2 separation

Substrate morphology has a significant effect on the CO 2 transport performance of a thin-film composite (TFC) membrane. In this study, a new mixed solvent comprising 2-pyrrolidone (2-PD) and 2-methoxyethanol (2-ME) was used to prepare polyethersulfone (PES) substrates with bicontinuous structure by water vapor-induced phase separation, followed by immersion in water as nonsolvent. Here, compared with the commonly used solvent, N-methyl-2-pyrrolidone (NMP), the 2-PD/2-ME mixed solvent is more hydrophilic and can decrease the thermodynamic stability of the casting solution significantly. As a result, the phase separation was induced via the spinodal decomposition mechanism. The open morphology bestowed the optimized substrate with a very high CO 2 permeance of 133,226 ± 3,870 GPU (1 GPU = 10 –6 cm 3 (STP) s –1 cm –2 cmHg –1 = 3.3464 × 10 -9 kg-mol s –1 m –2 Pa –1 ), which was 5 times more permeable than the baseline substrate synthesized with NMP. By using this new substrate, the prepared TFC membrane containing amines showed an increased CO 2 permeance of 908 ± 8 GPU at 57°C, which was 48 GPU higher than that with the baseline substrate. Meanwhile, the CO 2 /N 2 selectivity was retained at 162 ± 4 at 57°C. In addition, the good scalability of the new PES substrate was demonstrated by roll-to-roll fabrication of a 50' long scale-up PES substrate with a width of 21".

2-Pyrrolidone↗

DOE OSTI2021

Preparation of defect-free asymmetric gas separation membranes with dihydrolevoglucosenone (Cyrene TM ) as a greener polar aprotic solvent

Nonsolvent-induced phase separation (NIPS) is widely used to prepare asymmetric gas separation membranes. Most industrial NIPS casting solution formulations are limited to a small group of glassy polymers and, importantly, require toxic polar aprotic solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), or N-methyl-2-pyrrolidone (NMP). Growing restrictions on the use of such solvents are spurring the search for more benign casting solution formulations that do not compromise membrane performance. Herein this study reports high-flux, defect-free asymmetric polysulfone (PSf) gas separation membranes prepared using dihydrolevoglucosenone (Cyrene TM ), a polar aprotic solvent that is believed to be safer than DMAc, DMF, and NMP, as the majority casting solution component. Optimized formulations and casting conditions produce membranes with hydrogen permeances exceeding 100 gas permeance units (GPU) and selectivities at or above those of dense PSf films. Dry/wet NIPS membrane performance improved with shorter dry step times and increased Cyrene TM loadings relative to the volatile solvent, tetrahydrofuran (THF), in the casting solution. The high water-Cyrene TM Flory-Huggins interaction parameter, $\mathcal{X}12$ , and high casting solution viscosities help suppress the formation of skin layer defects and sublayer macrovoids. In some cases, membrane selectivities were influenced by substructure resistance, providing insight into the relationship between sublayer morphology and membrane performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗