Search NASA⌕ Search

SEARCH · Search NASA

Results for “NO dissociation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ring Opening in Cycloheptane and Dissociation of 1-Heptene at High Temperatures

Cycloalkanes and alkenes are important components of real fuels but there is little kinetic and mechanistic data on the dissociation of most large cyclic and olefinic molecules at elevated temperatures. We present here the first experimental and theoretical investigation of dissociation of cycloheptane and the initial product from ring opening, 1-heptene. Experiments were performed in a diaphragmless shock tube using laser schlieren densitometry. Pyrolysis of cycloheptane (0.5-4% in Kr) was studied over 1450-2000 K and 30-120 Torr. Experiments with 1-heptene (1-4% in Kr) covered 1200-1650 K and 30-120 Torr. A newly developed chemical kinetic mechanism for pyrolysis of cycloheptane and 1-heptene is presented herein. Simulations are in very good agreement with the experimental measurements. Rate coefficients for the initial ring-opening process in cycloheptane, k 1 , and dissociation of 1-heptene, k 2 , were determined from the experiments. Both k 1 and k 2 are in falloff, and the pressure and temperature dependencies were well reproduced by theoretical calculations allowing extrapolation to conditions beyond the scope of this work. These calculations yielded the following expressions for k 1 and k 2 with the uncertainties estimated as +/- 40% and +/- 50% respectively: k 1 , infinity = 5 . 94 & times; 10 17 exp ( & minus;44 T, 521 ) s & minus;1 and k 2 , infinity = 8 . 86 & times; 10 16 exp ( & minus;35 , 887 T ) s & minus;1 . The results of this study indicate that cycloheptane dissociates similarly to cyclopentane and cyclohexane, i.e. ring-opening via C -C scission to a diradical that rapidly isomerizes to a conjugate 1-alkene. The secondary chemistry is dominated by the dissociation products of the 1-alkenes i.e. allyl and n-alkyl radicals. Furthermore, rates of dissociation of the cycloalkanes are size dependent and k cyclopentane << k cyclohexane < k cycloheptane . (c) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Chemical kinetics↗
DOE OSTI2024

ASMS 2024 Investigation of Uranyl Perchlorate Anion Complexes in the Gas Phase via Infrared Multiphoton Dissociation and Collision Induced Dissociation

Investigation of Uranyl Perchlorate Anion Complexes in the Gas Phase via Infrared Multiphoton Dissociation and Collision Induced Dissociation Brittany D. M. Hodges, Christopher A. Zarzana, JungSoo Kim, Jonathan Martens, and W. C. M. Berden Introduction (120 words max) Effects of electronic structure on chemical bonding and reactivity play critical roles shaping the chemical bonding and reactivity behaviors of heavy elements. Understanding the role of f electrons in bond formation between the actinide-series elements like uranium with other ligands is critical for solving technical challenges associated with these heavy elements, important to nuclear fuel cycles, efficient separations of rare earth metals, and understanding the chemistry of stored nuclear fuels and related environmental management sites. In this study, we further examine the interactions between uranyl and the perchlorate ion in order to understand the structures of these ions through the use of IRMPD. Here we report the IRMPD spectra of [UO2(ClO4)3]-, [UO3(ClO4)2]-, and a proposed transition state. Methods (120 word max) IRMPD spectra and CID spectra were acquired using a Bruker amaZon QIT/MS instrument at the Free-Electron Lasers for Infrared eXperiments (FELIX) laboratory at Radboud University. The FELIX QIT/MS is modified to allow for the high-intensity tunable IR beam from FELIX to be directed into the ion packet, resulting in multiphoton dissociation that is measured only when the IR frequency is in resonance with an adequately high absorption vibrational mode of the mass-selected complex. DFT geometry optimizations and frequency calculations using the Gaussian suite of programs were performed using B3LYP, TPSSh, and PBE0 level of theory with 6-31+G(d) basis for the O, C, H, and N atoms and the SDD basis set for U. The SDD basis set employs the Stuttgart/Dresden effective core potential. Preliminary Data or Plenary Speakers Abstract (300 words max) Metal ion clusters of uranyl perchlorate were formed via direct electrospray ionization. For each metal ligand complex of interest, the parent ion was isolated and collision induced dissociation fragmentation and Infrared Multiphoton Dissociation (IRMPD) fragmentation spectra were acquired. Results presented here are the first look at the IRMPD spectra of [UO3(ClO4)2]-, [UO2(ClO4)3]-. Structures were examined using Gaussian at different levels of theory B3LYP level of theory, TPPSh and PBE0 levels, to reflect the behaviors of uranium metal ligand complexes most accurately. In these structures, we identified an overlap between each of these uranyl stretches resulting in their largely being obscured by a perchlorate mode. The CID product spectra agree with similar structures reported by Groenewold for uranyl nitrate in 2006 (10.1021/ja058106n).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Investigation of Uranyl Perchlorate Anion Complexes in the Gas Phase via Infrared Multiphoton Dissociation and Collision‐Induced Dissociation

The infrared multiphoton dissociation spectrum of the gas-phase uranyl perchlorate anion ([UO 2 (ClO 4 ) 3 ] − ) was measured. Here, the asymmetric uranyl stretch lies somewhere between 930 and 1030 cm −1 , though it could not be deconvoluted from a closely located perchlorate stretching mode. The experimentally measured spectrum was in good agreement with spectra calculated using density functional theory with the B3LYP and TPSSh functionals and Grimme's D3 dispersion corrections with Becke–Johnson damping. The calculations suggest that the asymmetric uranyl stretch lies in the range of 970–980 cm −1 , about 20–30 cm −1 higher than for the analogous uranyl trinitrato complex and consistent with perchlorate as a weaker ligand than nitrate. Like the uranyl trinitrato anion, fragmentation of [UO 2 (ClO 4 ) 3 ] − by collision-induced dissociation resulted in loss of a ClO 3 • radical to form [UO 3 (ClO 4 ) 2 ] − . Infrared multiphoton dissociation measurements of [UO 3 (ClO 4 ) 2 ] − indicate that the structure of the product ion has an O − ligand bound to the uranyl in a T-arrangement and two perchlorate ligands, matching the findings from uranyl nitrato complexes. The uranyl stretch in this complex was slightly separated from the perchlorate modes and was measured at 906 cm −1 , slightly higher than for the analogous nitrate complex, again consistent with perchlorate as a weaker ligand than nitrate in the gas phase.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2022

Influence of Long-Range Forces on the Transition States and Dynamics of NaCl Ion-Pair Dissociation in Water

We study NaCl ion-pair dissociation in a dilute aqueous solution using computer simulations both for the full system with long-range Coulomb interactions and for a well-chosen reference system with short-range intermolecular interactions. Analyzing results using concepts from Local Molecular Field (LMF) theory and the recently proposed AI-based analysis tool “State predictive information bottleneck” (SPIB), we show that the system with short-range interactions can accurately reproduce the transition rate for the dissociation process, the dynamics for moving between the underlying metastable states, and the transition state ensemble. Contributions from long-range interactions can be largely neglected for these processes because long-range forces from the direct interionic Coulomb interactions are almost completely canceled (>90%) by those from solvent interactions over the length scale where the transition takes place. Thus, for this important monovalent ion-pair system, short-range forces alone are able to capture detailed consequences of the collective solvent motion, allowing the use of physically suggestive and computationally efficient short-range models for the dissociation event. Here, we believe that the framework here should be applicable to disentangling mechanisms for more complex processes such as multivalent ion disassociation, where previous work has suggested that long-range contributions may be more important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sequential Bond Dissociation Energies of Th + (CO) x , x = 3–6: Guided Ion Beam Collision-Induced Dissociation and Quantum Computational Studies

Collision-induced dissociation (CID) of [Th,xC,xO] + , x = 3–6, with Xe is performed using a guided ion beam tandem mass spectrometer (GIBMS). Products are formed exclusively by the loss of CO ligands. Analyses of the kinetic energy-dependent CID product cross sections yield bond dissociation energies (BDEs) of (CO) x–1 Th + –CO at 0 K as 1.09 ± 0.05, 0.82 ± 0.07, 0.63 ± 0.05, and 0.70 ± 0.05 eV, respectively. Different structures of [Th,xC,xO] + were explored using various electronic structure methods, and BDEs for CO ligand loss from precursor [Th,xC,xO] + complexes were computed. Both experimental and theoretical results corroborate that the structures of [Th,xC,xO] + , x = 3–6, formed experimentally are homoleptic thorium cation carbonyl complexes, Th + (CO) x . The nonmonotonic trend in experimental BDEs is reproduced theoretically, although ambiguities in the spin states of the x = 4–6 complexes (doublet or quartet) remain. BDEs calculated at the coupled cluster with single, double, and perturbative triple excitations (CCSD(T))/cc-pVXZ//B3LYP/cc-PVXZ (X = T and Q) level and a complete basis set (CBS) extrapolation agree reasonably well with the experimental values for all complexes. Thorium oxide ketenylidene carbonyl cations, OTh + CCO(CO) y , y = 1–4, were calculated to be the most stable structures of [Th,xC,xO] + , x = 3–6, respectively; however, these are not observed in our experiment. Potential energy profiles (PEPs) having either quartet or doublet spin calculated at the B3LYP/cc-pVQZ level suggest that the failure to observe OTh + CCO(CO) y , y = 1–4, is the result of a barrier corresponding to the C–C bond formation, making the formation of OTh + CCO(CO) y inaccessible kinetically under the present experimental conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Theory-Enabled High-Throughput Screening of Ion Dissociation Explains Conductivity Enhancements in Diluted Ionic Liquid Mixtures

The growing demand for room-temperature ionic liquids (RTILs) for energy applications necessitates the development of an efficient screening platform. Here, in this study, we successfully developed a fully automated high-throughput RTIL screening platform specifically designed for assessing ionic conductivity. By utilizing the 96 wells of a microtiter plate as individual electrolysis cells, we measured the ionic conductivity of 22 different RTILs, encompassing various combinations of cations and anions, and benchmarked the values with existing literature. We also employed the screening platform to investigate the conductivities of RTIL mixtures with a nonaqueous solvent, ethylene glycol (EG). Specific combinations of RTILs with EG result in approximately 200% enhancement in the conductivity values compared to the pure RTILs. To understand the underlying mechanisms responsible for this enhancement, we developed a theoretical framework for ionic conductivity that considers factors such as the degree of dissociation, viscous forces, and molal volume of the RTIL-EG mixtures. The optimized electrolyte mixture was then employed in the migration-assisted moisture gradient (MAMG) CO 2 capture process to study the effects of improved ionic conductivity on the energy efficiency of the process. Notably, the enhanced conductivity of the RTIL-EG mixture led to a nearly 50% reduction in energy consumption for capturing CO 2 . These outcomes highlight the effectiveness of our strategy in screening RTILs and improving existing processes. Moreover, this fully automated high-throughput setup, combined with the developed theoretical framework, provides a comprehensive platform for screening and studying RTIL mixtures with different solvents, enabling their application in various fields.

25 ENERGY STORAGE↗
DOE OSTI2023

Computational Screening of Supported Metal Oxide Nanoclusters for Methane Activation: Insights into Homolytic versus Heterolytic C–H Bond Dissociation

Since its discovery in zeolites, the [CuOCu] 2+ motif has played an important role in our understanding of selective methane activation over supported metal oxide nanoclusters. Although there are two known C-H bond dissoci-ation mechanisms, namely homolytic and heterolytic cleavage, most computational studies on optimizing metal oxide nanoclusters for improved methane activation reactivity have focused only on the homolytic mechanism. In this work, both mechanisms were examined for a set of 21 mixed metal oxide complexes of the form of [M 1 OM 2 ] 2+ (M 1 , M 2 = Mn, Fe, Co, Ni, Cu, Zn). Except for pure copper, heterolytic cleavage was found to be the dominant C-H bond activation pathway for all systems. Furthermore, mixed systems including [CuOMn] 2+ , [CuONi] 2+ , and [CuOZn] 2+ are predicted to possess similar methane activation activity as pure [CuOCu] 2+ . Furthermore, these results suggest that both homolytic and heterolytic mechanisms should be considered in computing methane activation energies on supported metal oxide nanoclusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Density Functional Theory Study of the Adsorption and Dissociation of Copper(I) Acetamidinates on Ni(110): The Effect of the Substrate

In order to assess the role of a metal substrates on the thermal chemistry of adsorbed acetamidinate metalorganic compounds, we have studied the surface chemistry of copper(I)–N,N'-dimethylacetamidinate on Ni(110) using density functional theory and contrasted it with similar calculations we previously carried out on Cu(110). At low coverages, it was found that, in its most stable configuration, the molecular adsorption of copper(I)–N,N'-dimethylacetamidinate dimers occurs with the Cu atoms occupying surface hollow sites. In this work, the ligands reorient away from those metal centers, and the N atoms develop new direct bonds with surface Ni atoms. However, this configuration is not stable and decomposes by losing both ligands to the surface. In the final state, the two ligands bind via their N atoms to Ni sites one lattice space away from the sites where the Cu atoms remain, with their molecular planes perpendicular to that of the surface. This is in contrast with what happens in the case of adsorption on Cu(110), where the Cu atoms from the metalorganic complex still occupy hollow sites but where only one of the ligands breaks away and binds directly to the surface; the other remains on top of the two Cu ions. In terms of the energetics of adsorption and decomposition, the reactions on Ni(110) are much more exothermic than on Cu(110). Further analysis of the distribution of charge within the adsorbates shows a minor reduction of the Cu atoms of the dimer upon interaction with the surface; full reduction to metallic copper is complete only when both ligands have fully migrated to their new Ni surface sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Quantifying the Relevance of Prompt Dissociations of Resonance Stabilized Free Radicals in Flames

In prior studies from our laboratory we have shown that weakly-bound free radicals have a propensity to promptly dissociate at elevated temperatures relevant to flames. Dissociation can occur so rapidly at high temperatures in such weakly-bound radicals that it interferes with collisional relaxation of internal energies leading to prompt dissociation. While prompt dissociation is a ubiquitous feature in such free radical dissociations, we have hypothesized that its relevance to global combustion observables such as flame speeds depends on satisfying specific criteria. Two criteria that motivate the present study are that the free radicals must play a central role in the oxidation mechanism and that their thermal dissociation rate coefficients should be small enough. Resonance stabilized radicals have bond strengths ~ 50 kcal/mol (or larger) and consequently are known to dissociate slowly and persist even in high temperature environments. In this work we have calculated prompt dissociation probabilities for some simple allylic (allyl, methyl allyl, and dimethyl allyl) radicals. Flame simulations were performed to quantify the relevance of including prompt dissociations of these allylic radicals.

Allyl Radicals↗
DOE OSTI2022

Mechanisms of Complete Dissociation of CO 2 on Iron Clusters

Dissociation of CO 2 on iron clusters was studied by using semilocal density functional theory and basis sets of triple-zeta quality. Fe 2 , Fe 4 , and Fe 16 clusters were selected as the representative host clusters. When searching for isomers of Fe n CO 2 , n=2, 4 and 16 corresponding to carbon dioxide attachment to the host clusters, its reduction to O and CO, and to the complete dissociation, it was found that the total spin magnetic moments of the lowest energy states of the isomers are often quenched with respect to those of initial reagents Fe n +CO 2 . Dissociation pathways of the Fe 2 +CO 2 , Fe 4 +CO 2 , and Fe 16 +CO 2 reactions contain several transition states separated by the local minima states; therefore, a natural question is where do the spin flips occur? Since lifetimes of magnetically excited states were shown to be of the order of 100 fs, the search for the CO 2 dissociation pathways was performed under the assumption that magnetic deexcitation may occur at the intermediate local minima. Two dissociation pathways were obtained for each Fe n +CO 2 reaction using the gradient-based methods. It was found that the Fe 2 +CO 2 reaction is endothermic with respect to both reduction and complete dissociation of CO 2 , whereas the Fe 4 +CO 2 and Fe 16 +CO 2 reactions are exothermic to both reduction and complete dissociation of carbon dioxide. Finally, the CO 2 reduction was found to be more favorable than its complete dissociation in the Fe 4 case.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

The role of energy transfer and competing bimolecular reactions in characterizing the unimolecular dissociations of allylic radicals

Resonantly stabilized radicals (RSR's) such as allylic radicals typically have bond energies exceeding 45 kcal/mol and are therefore reasonably long-lived up to quite high temperatures. Consequently, kinetics of the unimolecular dissociations and bimolecular reactions of these long-lived RSR's assume significance in high temperature chemically reacting systems such as in flames. Our recent analyses (J. Cho et al., Proc. Comb. Inst., 2022) of the uncertainty propagated by the energy transfer parameters for 1-methylallyl (1MA) dissociation to the laminar flame speed, indicates an intricate coupling between the kinetics of 1MA dissociation (chain propagation) and its reaction with H-atoms (chain-termination). Here, this work extends such analyses to other C 3 – C 5 allylic radicals: allyl, 2-methylallyl, 1,1-dimethylallyl, 1,2-dimethylallyl, and 1,3-dimethylallyl. Theoretical kinetics for the C 3 – C 4 allylic radicals were taken from prior literature studies (J.A. Miller et al., J. Phys. Chem., 2008; J. Cho et al., Proc. Comb. Inst., 2022; R.S. Tranter et al., Proc. Comb. Inst., 2017). Potential energy surfaces were newly computed for the dissociations of the larger C5 allylic radicals and the reactions of these radicals with H-atoms. These PES's were then used to calculate rate constants for the relevant unimolecular and bimolecular reactions. Energy transfer has a crucial role to play in these pressure-dependent reactions and therefore the present kinetics calculations relied on a-priori predictions of collisional energy transfer parameters to best characterize the branching between chain propagating unimolecular dissociations of these allylic radicals and chain terminating bimolecular reactions of these RSR's with H-atoms. Prompt dissociations are now established to be a universal feature of free radical dissociations. Here we have also characterized the propensity for prompt dissociations in these more-stable allylic RSR's and their role in combustion simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Modeling dissociation of ionic liquids with electrolyte NRTL model

Dissociation of ionic liquids (ILs) is critical to electrochemical process performance by affecting ionic conductivity. Prior studies of thermodynamic modeling either assumed no dissociation or complete dissociation that were not consistent with experimental observations. This work presented an eNRTL model for three aqueous imidazolium-based IL systems: [Emim][EtSO 4 ], [Emim][TFA], and [Emim][TfO]. The model accurately correlates the IL dissociation and VLE data in the entire concentration range from pure IL to infinite dilution aqueous solution. The system non-ideality is dominated by the dissociation chemistry. Dissociation behavior is driven by strong short-range interaction of the molecular IL-water pair relative to the dissociated IL-water pair, consistent with prior studies indicating that molecular IL and water can form an energetically favorable complex. The interaction energy parameters calculated in this work qualitatively agrees with the hydrogen bonding ability of the anions previously reported. This research not only provides a model that well describes the IL dissociation but also demonstrates the physical significance of eNRTL model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Effects of Field Strength and Silver Nanowire Size on Plasmon-Enhanced N 2 Dissociation

Dissociation of the nitrogen molecule via plasmon-enhanced catalysis using noble metal nanoparticles has been investigated both experimentally and computationally in recent years. However, the mechanism of plasmon-enhanced nitrogen dissociation is still not very clear. In this work, we apply theoretical approaches to examine the dissociation of a nitrogen molecule on atomically-thin Ag n nanowires (n = 6, 8, 10, 12) and a Ag 19 + nanorod. Ehrenfest dynamics provides information about the motion of nuclei during the dynamics process and real-time TDDFT calculations show the electronic transitions and population of electrons over the first 10s of fs time scale. The activation and dissociation of nitrogen is typically enhanced when the electric field strength increases. However, the enhancement is not always monotonic with field strength. As the length of the Ag wire increases, nitrogen is typically easier to dissociate and thus requires lower field strengths, even though the plasmon frequency is lower. The Ag 19 + nanorod leads to faster dissociation of N 2 than the atomically-thin nanowires. Altogether, our detailed study yields insights into the mechanisms involved in plasmon-enhanced N 2 dissociation, as well as provides information about factors that can be used to improve adsorbate activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Investigating the Elusive Nature of Atomic O from CO 2 Dissociation on Pd(111): The Role of Surface Hydrogen

CO 2 dissociation is a key step in CO 2 conversion reactions to produce value-added chemicals typically through hydrogenation. In many cases, the atomic O produced from CO 2 dissociation can potentially block adsorption sites or change the oxidation state of the catalyst. Here, we used ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and density functional theory (DFT) calculations to investigate the presence of surface species from the dissociation of CO 2 on Pd(111). AP-XPS results show that CO 2 was dissociated to produce adsorbed CO, but dissociated atomic O was not observed at room temperature. We were only able to observe atomic O when CO 2 was introduced at 500 K. Further investigations of O-covered Pd(111) revealed that chemisorbed O could be easily removed by low pressures of CO and H 2 . Notably, the effect of H 2 is quite prominent since it could react with chemisorbed O at a pressure as low as 2 × 10 -9 Torr, and the presence of H2 at ambient pressure prevented CO 2 dissociation. DFT calculations showed that in the presence of background H 2 , facile CO 2 dissociation took place via the reverse water–gas shift (rWGS) reaction, which resulted in the formation of adsorbed CO and removal of O by H 2 . DFT also identified the possible variation of surface species on simultaneous exposure of CO 2 and H 2 over Pd(111) depending on temperature and pressure, which opens alternative opportunities to tune the CO 2 hydrogenation catalysis by controlling the reaction conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Spot the difference: hydrogen adsorption and dissociation on unsupported platinum and platinum-coated transition metal carbides

Hydrogenation reactions are involved in several processes in heterogeneous catalysis. Platinum is the best-known catalyst; however, there are limitations to its practical use. Therefore, it is necessary to explore alternative materials and transition metal carbides (TMCs) have emerged as potential candidates. We explore the possibility of using cheap TMCs as supports for a Pt monolayer, aiming to reduce the amount of the noble metal in the catalyst without a significant loss of its activity towards H 2 dissociation. Hence, analyzing H 2 dissociation from a fundamental point of view is a necessary step towards a further practical catalyst. By means of periodic DFT calculations, we analyze H 2 adsorption and dissociation on Pt/β-Mo 2 C and Pt/α-WC surfaces, as a function of hydrogen surface coverage ( Θ H ), resembling a more realistic model of a catalyst. H 2 dissociation rates were analyzed as a function of the reaction temperature. Overall, the results show that Pt/C-WC and Pt/Mo-Mo 2 C have a Pt-like behavior for H 2 dissociation at Θ H > 1/2 ML. At a particular temperature of 298 K, Pt/C-WC and Pt/Mo-Mo2C have low energy barriers for H 2 * → 2H* (0.13 and 0.11 eV, respectively), close to the value of Pt (0.06 eV). For the highest coverage, i.e. Θ H = 1, Pt/C-WC has a lower activation energy and a higher reaction rate than Pt. Finally, the H 2 dissociation rate is higher in Pt/Mo-Mo 2 C than in Pt when increasing the temperature above 298 K. Our results put Pt/C-WC and Pt/Mo-Mo 2 C under the spotlight as potential catalysts for H 2 dissociation, with a similar performance to Pt, paving the way for further experimental and/or theoretical studies, addressing the capability of Pt/TMC as practical catalysts in hydrogenation reactions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Dissociation-induced depletion of high-energy reactant molecules as a mechanism for pressure-dependent rate constants for bimolecular reactions

In 1922, Lindemann proposed the now-well-known mechanism for pressure-dependent rate constants for unimolecular reactions: reactant molecules with sufficiently high energies dissociate more quickly than collisions can reestablish the Boltzmann distribution of the internal energies of the molecule during its dissociation at low pressures – yielding pressure-dependent rate constants for unimolecular reactions due to the preferential depletion of the high energy states capable of dissociation. In the last century, incredible progress has been made in achieving a far greater understanding of and quantitative predictions for unimolecular and association reactions. In the modern era, pressure-dependent phenomenological rate constants are now nearly universally used to describe the rates of unimolecular and associative reactions in phenomenological kinetic modeling. However, there is a second, more indirect, implication of Lindemann’s mechanism that relates to how these dissociation-induced non-equilibrium distributions impact bimolecular reactions, including non-associative bimolecular reactions – which are generally not considered to have pressure-dependent rate constants. Yet, as we show herein, the same high energy states depleted due to dissociation would otherwise react most rapidly in high-activation-energy bimolecular reactions – yielding a mechanism for pressure-dependent rate constants for bimolecular reactions (including non-associative reactions). Here, we present results from a case study for CH 2 O dissociation, isomerization, and bimolecular reaction with O2 to explore this question. Results from our master equation calculations indicate that the effect of dissociation-induced non-equilibrium distributions on bimolecular reactions can be substantial – even when chemical timescales are well separated from internal energy relaxational timescales (i.e. when the traditional rate constant description would be thought to apply). This effect is found to be more pronounced – and more complex – for bimolecular reactions involving molecular entities whose chemical timescales are merged with the internal energy relaxational timescales. Lastly, we present some ideas for discussion regarding what should be considered as “chemical species” in phenomenological kinetic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO Dissociation on model Co/SiO 2 catalysts – effect of adsorbed hydrogen

Here we found experimental evidence that shows the effect that adsorbed hydrogen can have on CO dissociation. For cobalt nanoparticles supported on SiO 2 , adsorbed hydrogen enhances CO dissociation. In contrast, adsorbed hydrogen inhibits CO dissociation on a cobalt film supported on SiO 2 . Considering the nature of cobalt deposited by physical vapor deposition, these results can be explained by a preference for CO dissociation to follow the hydrogen-assisted dissociation mechanism on FCC cobalt and step-edges, while the direct dissociation mechanism is preferred on HCP cobalt. These results are in agreement with previous theoretical results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗