Search NASA⌕ Search

SEARCH · Search NASA

Results for “NOTCH STRENGTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Notch strength of composites

The notch strength of composites is discussed. The point stress and average stress criteria relate the notched strength of a laminate to the average strength of a relatively long tensile coupon. Tests of notched specimens in which microstrain gages have been placed at or near the edges of the holes have measured strains much larger that those measured in an unnotched tensile coupon. Orthotropic stress concentration analyses of failed notched laminates have also indicated that failure occurred at strains much larger than those experienced on tensile coupons with normal gage lengths. This suggests that the high strains at the edge of a hole can be related to the very short length of fiber subjected to these strains. Lockheed has attempted to correlate a series of tests of several laminates with holes ranging from 0.19 to 0.50 in. Although the average stress criterion correlated well with test results for hole sizes equal to or greater than 0.50 in., it over-estimated the laminate strength in the range of hole sizes from 0.19 to 0.38 in. It thus appears that a theory is needed that is based on the mechanics of failure and is more generally applicable to the range of hole sizes and the varieties of laminates found in aircraft construction.

Whitney, J. M.↗
NASA NTRS1988

Analytical and experimental investigation of the notched strength of thick laminates with surface notches

Experimental and analytical investigations of the fracture of a graphite/epoxy laminate with part-through semielliptic surface notches have been conducted. Experimental values of notched strength were determined for a variety of notch aspect ratios and notch depths. Analytical predictions of laminate failure were obtained from three different models. The three models were equally successful in predicting the fracture of laminates with deep notches. The experimental results of laminates with shallow notches indicated more notch sensitivity (that is greater strength reduction) than did the analytical models.

Harris, Charles E.↗
NASA NTRS1972

Notched strength of beryllium powder and ingot sheets.

The effects of notches in thin beryllium sheets were studied as functions of material variables and notch severity. Double edge notched samples having stress concentration factors of 1.0 to 15.4 were prepared by milling to size, etching, and electrical discharge machining the notches. Strength was not reduced greatly by sharp notches, and duller notches were more deleterious than sharp notches. The trend was for reduced strength for dull notches, increased strength for sharper notches, and reduced strength for very sharp notches. Differences in material purity or source of the sheet had little affect on notch sensitivity. The most important factors appear to be oxide content and directionality of the sheet microstructure; high oxide content and highly directional microstructure tend to give more notch sensitivity than low oxide content, and more bidirectional microstructure. Postulated causes of the change in notched/unnotched strength are given.

Moss, R. G.↗
NASA NTRS1985

Notched strength of composite laminates: Predictions and experiments - A review

A self-contained review of several semiempirical fracture models for predicting notched strength of composite laminates is presented, based on notched strength data on 70 different laminate configurations of graphite/epoxy, boron/aluminum, and graphite/polyimide. Emphasis is placed on experimental results concerning such failure factors as delamination, splitting, and size of damage zone. Moreover, the fracture model parameters are correlated with the notch sensitivity of composite laminates, and the applicability of the correlations in describing the material notch sensitivity is evaluated. The predictions provided by the different models were found to be identical for all practical purposes.

Awerbuch, J.↗
NASA NTRS1977

Sharply notch cylindrical tension specimen for screening plane-strain fracture toughness. I - Influence of fundamental testing variables on notch strength. II Applications in aluminum alloy quality assurance of fracture toughness

A description is presented of studies which have been conducted to establish an improved technology base for a use of the sharply notched cylindrical specimen in quality assurance tests of aluminum alloy products. The results are presented of an investigation of fundamental variables associated with specimen preparation and testing, taking into account the influence of the notch root radius, the eccentricity of loading, the specimen diameter, and the notch depth on the sharp notch strength. Attention is given to the statistical procedures which are necessary to establish correlations between the sharp notch strength and the plane-strain fracture toughness for high-strength aluminum alloys.

Jones, M. H.↗
NASA NTRS2013

Notched Strength Allowables and Inplane Shear Strength of AS4/VRM-34 Textile Laminates

Notched and unnotched strength allowables were developed for a textile composite to provide input data to analytical structural models based on the Pultruded Rod Stiffened Efficient Unitized Structure (PRSEUS) concept. Filled-hole tensile strength, filled-hole compressive strength, and inplane shear strength along stitch lines have been measured. The material system evaluated in this study is based on warp-knitted preforms of AS4 carbon fibers and VRM-34 epoxy resin, which have been processed via resin infusion and oven curing. All specimens were tested in as-fabricated (dry) condition. Filled-hole strengths were evaluated with and without through-thickness stitching. The effects of scaling on filled-hole tensile strength were evaluated by testing specimens in two widths, but with identical width / hole-diameter ratios. Inplane shear specimens were stitched in two configurations, and two specimen thicknesses were tested for each stitch configuration.

Grenoble, Ray W.↗
NASA NTRS1991

Effect of fiber-matrix debonding on notched strength of titanium metal matrix composites

Two specimen configuration of a (0/90)2s SCS-6/Ti-15-3 laminate were tested and analyzed: a center hole (CH) specimen and a double edge notch (DEN) specimen. The two specimen configurations failed at similar stress levels. Two analytical techniques, a 3-D finite-element analysis and a macro-micromechanical analysis were used to predict the overall stress-deformation behavior and the notch-tip fiber-matrix interface stresses in both configurations.

Bigelow, C. A.↗
NASA NTRS1987

A fractographic investigation of the influence of stacking sequence on the strength of notched laminated composites

The fracture behavior of T300/5208 CFRP laminate panels with 12 different combinations of ply orientation and stacking sequence is investigated experimentally, using optical microscopy, SEM, and X-ray radiography to characterize the notch-tip damage zones and fracture surfaces of center-cracked tension specimens subjected to tensile loading at constant crosshead displacement rate 20 micron/s. The results are presented graphically and analyzed in detail. Significant differences in notched strength are found for different ply fiber orientations and stacking sequences; the laminates with few major delaminations had a greater percentage of fracture due to broken fibers and also higher notched strength.

Harris, Charles E.↗
NASA NTRS1989

A comparison of predicted and measured strengths of thick notched graphite/epoxy laminates

The effect of thickness on the notched strength of three graphite/epoxy laminates is studied. The strength of the laminates is shown to be a function of laminate thickness. The notched strength of (0/+ or - 45/90)ns and (0/90)ns laminates decreased toward asymptotic values with increasing laminate thickness, while that of the (0/+ or - 45)ns laminate increased toward an asymptotic value with increasing laminate thickness. For all three laminate types, the notched strength decreased with increasing notch size, regardless of thickness. The fracture of the thick laminates was essentially uniform and self-similar with the notch. The 'universal' value of the general toughness parameter developed by Poe (1981) successfully predicts the notched strength of the thick laminates.

Harris, C. E.↗
NASA NTRS1985

On the use of crack-tip-opening displacement to predict the fracture strength of notched graphite/epoxy laminates

Using the center-cracked tension specimen geometry, the fracture strength of notched graphite/epoxy laminates is measured experimentally. Four replicate tests are conducted for a variety of laminate-stacking sequences, thicknesses, and notch lengths. Extensive notch-tip damage prior to fracture is characteristic of most laminates. The values of critical crack-tip-opening displacement (CTOD) are calculated from values of crack-opening displacement measured at the notch center line at failure and are found to be independent of notch size for the laminates studied. A Dugdale (1950) model is used along with the estimated CTOD to predict notched laminate strength.

Harris, C. E.↗
NASA NTRS1981

Effect of ply constraint on fatigue damage development in composite material laminates

It is shown that the effects of constraint on the response of composite materials can be classified as (1) in-plane effects, and (2) through-the-thickness effects; with in-plane constraint being the principal contributor to notched strength and changes in notched strength under quasi-static loading. It is also determined that the constraint situations that produce the greatest static strength do not minimize the extent of damage that develops under either static or cyclic loading, and that through-the-thickness constraint controls the pattern and spacing of transverse cracks in the characteristic damage state that determines those of strength and stress in unnotched laminates. It is concluded that the mode and the extent of damage in notched and unnotched constrained plies is governed by the stress state in those plies, as determined by the constraining ones, and the relationship of stress and strength states.

Stinchcomb, W. W.↗
NASA NTRS2007

Notch Fatigue Strength of a PM Disk Superalloy

New powder metallurgy (PM) disk superalloys, such as ME3, LSHR, and Alloy 10, have been developed in recent years which enable rim temperatures in turbine disk applications to approach 1300 F. Before these alloys can be utilized at 1300 F their long term durability must be ensured. One of the key requirements for disk rims is notch fatigue strength. This issue is extremely important and is a direct result of the blade attachment geometry employed at the disk rim. Further, the imposition of a dwell at maximum load, associated with take off and landing, can also affect notch fatigue strength. For these reasons a study has been undertaken to assess the notch dwell fatigue strength of a modern PM disk alloy through spin pit evaluation of a prototypical disk. The first element of this program involves screening potential heat treatments with respect to notch fatigue strength at 1300 F utilizing a conventional notch fatigue specimen with a stress concentration factor (K(sub t)) of 2 and a 90 sec dwell at peak load. The results of this effort are reported in this paper including the downselect of an optimal heat treatment, from a notch fatigue standpoint.

Gayda, John↗
NASA NTRS1985

Fracture of thick graphite/epoxy laminates with part-through surface flaws

Fracture behavior of tensile specimens containing through-the-thickness flaws and part-through semi-elliptic surface flaws was investigated. The material was T300/5208 graphite/epoxy, with a stacking sequence 0/+ or - 45/90 sub ns. Laminate thicknesses ranged from 8 to 120 plies. Fracture toughness for specimens with through-the-thickness flaws was a function of laminate thickness. Fracture toughness was also independent of crack size. Fracture toughness for the thick laminates was also independent of specimen geometry (center-cracked tension specimen, compact tension specimen, and three-point bend specimen). Using the asymptotic value of facture toughness and linear elastic isotropic fracture mechanics, the notched strength of tensile specimens with semi-elliptic surface flaws was predicted. The strength ratio is a function of the flaw depth (a/t) and flaw aspect (a/c) ratios. Comparisons between predicted and experimental strengths are good for large values of a/t. The notched strength of filament wound graphite/epoxy tensile specimens with part-through surface flaws was also predicted.

Morris, D. H.↗
NASA NTRS1986

Fracture of thick graphite/epoxy laminates with part-through surface flaws

Fracture behavior of tensile specimens containing through-the-thickness flaws and part-through semi-elliptic surface flaws was investigated. The material was T300/5208 graphite/epoxy, with a stacking sequence 0/+ or - 45/90 sub ns. Laminate thicknesses ranged from 8 to 120 plies. Fracture toughness for specimens with through-the-thickness flaws was a function of laminate thickness. Fracture toughness was also independent of crack size. Fracture toughness for the thick laminates was also independent of specimen geometry (center-cracked tension specimen, compact tension specimen, and three-point bend specimen). Using the asymptotic value of fracture toughness and linear elastic isotropic fracture mechanics, the notched strength of tensile specimens with semi-elliptic surface flaws was predicted. The strength ratio is a function of the flaw depth (a/t) and flaw aspect (a/c) ratios. Comparisons between predicted and experimental strengths are good for large values of a/t. The notched strength of filament wound graphite/epoxy tensile specimens with part-through surface flaws was also predicted.

Harris, C. E.↗