Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nanophosphors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Er3+-Yb3+/Er3+-Yb3+-Li+/Er3+-Yb3+-Zn2+:Gd2O3 nanophosphors for efficient frequency upconverter and temperature sensing applications

Highlights: • The Er{sup 3+}-Yb{sup 3+}:Gd{sub 2}O{sub 3} nanophosphors infer the enhancement in UC emission intensity via incorporation of Li{sup +} and Zn{sup 2+} ions. • The average particles size of the developed nanophosphors is found to be lie in nanometer range by XRD and TEM analysis. • The maximum sensitivity ∼ 0.0116 K{sup −1} has been reported in the Er{sup 3+}-Yb{sup 3+}-Zn{sup 2+}:Gd{sub 2}O{sub 3} nanophosphors. • The colour coordinate for the developed Er{sup 3+}-Yb{sup 3+}-Zn{sup 2+}:Gd{sub 2}O{sub 3} nanophosphors lie in the greenish yellow colour region. - Abstract: Er{sup 3+}/Yb{sup 3+}/Li{sup +}/Zn{sup 2+}:Gd{sub 2}O{sub 3} nanophosphors synthesized via combustion synthesis method have been structurally and optically characterized. The average particles size of the developed nanophosphors has been found to be ∼ 25 nm by Transmission Electron Microscopy (TEM) analysis which is in good agreement with the X-rays Diffraction (XRD) results. The significant enhancement in upconversion (UC) emission intensity for green (∼ 20 and 70 times) and red (∼ 7 and 20 times) band have been observed after codoping with Li{sup +} and Zn{sup 2+} ions respectively in Er{sup 3+}-Yb{sup 3+}:Gd{sub 2}O{sub 3} system. The temperature sensing capability of the optimized nanophosphors has been studied corresponding to two thermally coupled {sup 2}H{sub 11/2} and {sup 4}S{sub 3/2} levels of the Er{sup 3+} ions. The sensitivity ∼ 0.0096 K{sup -1}, 0.00109 K{sup -1} and 0.0116 K{sup -1} have been reported in the Er{sup 3+}-Yb{sup 3+}:Gd{sub 2}O{sub 3}, Er{sup 3+}-Yb{sup 3+}- Li{sup +}:Gd{sub 2}O{sub 3} and Er{sup 3+}-Yb{sup 3+}- Zn{sup 2+}:Gd{sub 2}O{sub 3} nanophosphors respectively. The photometric characterizations of the developed nanophosphors have also been reported.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of oxygen vacancy and photoluminescence in calcium tungstate nanophosphors with different particle sizes

Highlights: • CaWO{sub 4} nanophosphors with different particle sizes were prepared by hydrothermal processes through controlling the concentration of surfactant. • Green emission band of oxygen vacancy in CaWO{sub 4} nanophosphor was clearly observed upon the irradiation of 350 nm excitation. • The concentration of oxygen vacancy in CaWO{sub 4} nanophosphor could be increased by reducing its size. - Abstract: Calcium tungstate (CaWO{sub 4}) nanophosphors with the particle sizes from 35 to 90 nm were synthesized by a hydrothermal process through exactly controlling the pre-treated conditions. The influence of particle size on oxygen vacancy and photoluminescence properties in CaWO{sub 4} nanophosphors was investigated and discussed. The crystal structure of the CaWO{sub 4} nanophosphors presented a certain level of distortion due to the high concentration of oxygen vacancy. Under 350 nm excitation, a clear green emission aroused by oxygen vacancy was observed. The possible luminescence processes for the matrix and oxygen vacancy were proposed. The luminescence spectra of the nanophosphors revealed that the emission and absorption intensity aroused by oxygen vacancy were both enhanced when the size is decreased. On the basis of the above results, the essential relationship between particle size and oxygen vacancy in CaWO{sub 4} nanophosphors was concluded that the concentration of oxygen vacancy could be increased by reducing its size, which was further confirmed by decay lifetimes.

36 MATERIALS SCIENCE↗

Preparation, photoluminescent properties and luminescent dynamics of BaAlF{sub 5}:Eu{sup 2+} nanophosphors

Graphical abstract: Rice-shaped BaAlF{sub 5}:Eu{sup 2+} nanophosphors were synthesized via one-pot hydrothermal process. The as-prepared BaAlF{sub 5}:Eu{sup 2+} are composed of many particles with an average diameter of 40 nm. When excited at 260 nm, the sharp line emission located at 361 nm of Eu{sup 2+} was observed. The optimum doping concentration of Eu{sup 2+} was confirmed to be 5 mol%. The strong ultraviolet emission of Eu{sup 2+} ions in BaAlF{sub 5}:Eu{sup 2+} nanoparticles suggests that these nanoparticles may have potential applications for sensing, solid-state lasers and spectrometer calibration. - Highlights: • BaAlF{sub 5}:Eu{sup 2+} nanophosphors were synthesized via a mild hydrothermal process. • The Van and Huang models were used to research the mechanism of concentration quenching. • The optimum doping concentration of Eu2+ was confirmed to be 5 mol%. - Abstract: Eu{sup 2+}-doped BaAlF{sub 5} nanophosphors were synthesized via a facile one-pot hydrothermal method. The final products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectroscopy. XRD results showed that the prepared samples are single-phase. The FE-SEM and TEM images indicated that the prepared BaAlF{sub 5}:Eu{sup 2+} nanophosphors are composed of many rice-shaped particles with an average diameter of 40 nm. When excited at 260 nm, BaAlF{sub 5}:Eu{sup 2+} nanophosphors exhibit the sharp line emissions of Eu{sup 2+} at room temperature. The optimum doping concentration of Eu{sup 2+} was confirmed to be 5 mol%. The Van and Huang models were used to study the mechanism of concentration quenching and the electric dipole–dipole interaction between Eu{sup 2+} can be deduced to be a dominant for quenching fluorescence in BaAlF{sub 5}:Eu{sup 2+} nanophosphors. The strong ultraviolet emission of Eu{sup 2+} in BaAlF{sub 5}:Eu{sup 2+} nanophosphors suggests that these nanoparticles may have potential applications for sensing, spectrometer calibration and solid-state lasers.

36 MATERIALS SCIENCE↗

Thermoluminescence and glow curves analysis of γ-exposed Eu{sup 3+} doped K{sub 3}Y(PO{sub 4}){sub 2} nanophosphors

Highlights: • First time, a detailed comparative study of the glow curves and kinetic parameters was made on K{sub 3}Y(PO{sub 4}){sub 2} nanophosphor. • Combustion method was employed to synthesize the Eu{sup 3+} doped K{sub 3}Y(PO{sub 4}){sub 2} nanophosphor. • The nanophosphor exhibited sublinear response suggesting that it is suitable for TL dosimetry. - Abstract: Eu{sup 3+} doped K{sub 3}Y(PO{sub 4}){sub 2} nanophosphor was synthesized by combustion synthesis using urea as a fuel. The crystal structure and particle morphology of the nanophosphor were investigated by using X-ray diffraction and transmission electron microscopy, respectively. A Thermoluminescence (TL) study was carried out after exposing the samples to gamma radiation. The TL glow curves exhibited a prominent peak at 407 K and a small hump at 478 K. The intensity of the peaks increased with the increase in the dose of the gamma rays (0.01–5 kGy). The K{sub 3}Y(PO{sub 4}){sub 2}: Eu{sup 3+} (2.5 mol%) nanophosphor exhibited sublinear TL response to γ-radiation over a wide range of gamma doses (0.01–5 kGy). The TLanal program was used to analyze the glow curves of the K{sub 3}Y(PO{sub 4}){sub 2} nanophosphor at different doses (0.2–5 kGy) and different heating rates (3–10 K/s). A comparative study was done for kinetic trapping parameters that were determined by the peak shape methods of Chen, Grossweiner and Lushchik. The frequency factors (s) for each glow peak were also calculated. The values of the activation energy (E) obtained by the TLanal program were in good agreement with those obtained by the peak shape methods. The effect of different amount of doses and different heating rates are discussed.

36 MATERIALS SCIENCE↗

Structural and photoluminescence investigations of Sm{sup 3+} doped BaY{sub 2}ZnO{sub 5} nanophosphors

Highlights: • BaY{sub 2(1−x)}Sm{sub 2x}ZnO{sub 5} nanophosphors have been synthesized via solution combustion. • The nanophosphors have been characterized by XRD, TEM and PL spectroscopy. • The crystal structure reveals influence of doping on lattice parameters. • This nanophosphor executes orange–red emission under near UV excitation. - Abstract: BaY{sub 2}ZnO{sub 5}:Sm{sup 3+} nanophosphor was successfully synthesized using solution combustion process. XRD and photoluminescence (PL) techniques were used to analyze the structural and photoluminescence properties. Morphological study of the thermally stable powder was carried out using transmission electron microscope (TEM). Rietveld refinement technique has been used to analyze the samples qualitatively as well as quantitatively. X-Ray diffraction analysis confirms that the highly crystalline single phased Sm{sup 3+} doped BaY{sub 2}ZnO{sub 5} nanophosphor crystallizes in orthorhombic lattice with Pbnm space group. The average particle size lies in the range 80–90 nm with spherical morphology. The photoluminescence excitation at 411 nm yields an intense orange–red emission centered at 610 nm due to {sup 4}G{sub 5/2}–{sup 6}H{sub 7/2} transition. The concentration dependent luminescent behavior of BaY{sub 2(1−x)}Sm{sub 2x}ZnO{sub 5} nanophosphor shows that the optimum concentration for best luminescence is 3 mol%. These results indicate that these nanophosphors find potential applications in the field of phosphor-converted white LED systems.

36 MATERIALS SCIENCE↗

Luminescent properties of Mn{sup 2+} doped apatite nanophosphors

Nanophosphors have been extensively investigated during the last decade due to their various high-performance application potential such as lamp industry, radiation dosimetry, X-ray imaging and colour display. The synthesis of inorganic nanophosphors using both ionizing radiation (IR) or UV light represents very promising technological field. Alkaline earth nanophosphors gathered a lot of attention in past decades because they are considered to be excellent host materials. Transition-metal oxides are well known luminescent emitters in the visible spectral region. Mn{sup 2+} doped calcium-lithium hydroxyapatite (CLHA) nanophosphors were prepared by mechanochemical synthesis. The prepared samples were characterized by photoluminescence studies. Photoluminescence spectra of Mn{sup 2+} doped CLHA nanophosphors exhibited green and strong orange emission bands at 534, 577 nm respectively under the excitation wavelength of 365 nm. The CIE chromaticity coordinates were also calculated from emission spectra for Mn{sup 2+} doped CLHA nanophosphors.

36 MATERIALS SCIENCE↗

Nanophosphor composite scintillator with a liquid matrix

An improved nanophosphor scintillator liquid comprises nanophosphor particles in a liquid matrix. The nanophosphor particles are optionally surface modified with an organic ligand. The surface modified nanophosphor particle is essentially surface charge neutral, thereby preventing agglomeration of the nanophosphor particles during dispersion in a liquid scintillator matrix. The improved nanophosphor scintillator liquid may be used in any conventional liquid scintillator application, including in a radiation detector.

McKigney, Edward Allen↗

Nanophosphor composite scintillators comprising a polymer matrix

An improved nanophosphor composite comprises surface modified nanophosphor particles in a solid matrix. The nanophosphor particle surface is modified with an organic ligand, or by covalently bonding a polymeric or polymeric precursor material. The surface modified nanophosphor particle is essentially charge neutral, thereby preventing agglomeration of the nanophosphor particles during formation of the composite material. The improved nanophosphor composite may be used in any conventional scintillator application, including in a radiation detector.

Muenchausen, Ross Edward↗

Swift heavy ion induced structural and optical properties of Y{sub 2}O{sub 3}:Eu{sup 3+} nanophosphor

Highlights: ► Europium doped yttrium oxide nanophosphor was synthesized via combustion method. ► Prepared nanophosphor was irradiated by 150 MeV Swift heavy ion (Ni{sup 7+}). ► Structural (XRD, FTIR, and TEM) and optical properties (DR and PL) after ion irradiation were studied. ► Band gap increases with ion fluence due to the decrease in average crystallite size. -- Abstract: This paper reports the structural and optical modifications of Y{sub 2}O{sub 3}:Eu{sup 3+} nanophosphor induced by 150 MeV Ni{sup 7+} swift heavy ions (SHI) in the fluence range 1 × 10{sup 11} to 1 × 10{sup 13} ions/cm{sup 2}. The XRD, TEM and FTIR studies confirm the loss of crystallinity of the nanophosphors after ion irradiation. Diffuse reflectance spectrum shows a blue shift in the absorption band for SHI induced nanophosphors. An increase in the intensity of photoluminescence peaks without any shift in the peak positions was observed.

36 MATERIALS SCIENCE↗

The solution combustion synthesis of nanophosphors

Nanophosphors are defined as nano-sized (1-100mn), insulating, inorganic materials that emit light under particle or electromagnetic excitation. Their unique luminescence properties provide an excellent potential for applications in radiation detection and imaging. Herein, solution combustion synthesis (SCS) is presented as a method to prepare nanophosphor powders, while X-ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL), photoluminescence excitation (PLE), and other techniques were used to characterize their structural and optical properties. The goal of this work is to synthesize bright, high-quality powders of nanophosphors, consolidate them into bulk materials and study their structural and optical properties using XRD, TEM, PL, and PLE. SCS is of interest because it is a robust, inexpensive, and facile technique, which yields a significant amount of a wide variety of oxide materials, in a short amount of time. Several practical nanophosphors were synthesized and investigated in this work, including simple oxides such as Y{sub 2}O{sub 3}:Bi, Y{sub 2}O{sub 3}:Tb, Y{sub 2}O{sub 3}:Eu and Gd{sub 2}O{sub 3}:Eu, complex oxides such as Gd{sub 2}SiO{sub 5}:Ce, Y{sub 2}SiO{sub 5}:Ce, Lu{sub 2}SiO{sub 5}:Ce, Zn{sub 2}SiO{sub 4}:Mn, and Y{sub 3}Al{sub 5}O{sub 12}:Ce. Results demonstrate that altering the processing parameters such as water content of the precursor solution, ignition temperature, fuel type and amount, and post-synthesis annealing can significantly improve light output, and that it is possible to optimize the luminescence output of oxyorthosilicates by reducing the amount of silica in the precursor mixture.

36 MATERIALS SCIENCE↗

Alpha-particle-induced luminescence of rare-earth-doped Y{sub 2}O{sub 3} nanophosphors

The feasibility of utilizing Y{sub 2}O{sub 3}:Tb{sup 3+} and Y{sub 2}O{sub 3}:Eu{sup 3+} as radioluminescent nanophosphors under alpha-particle excitation is investigated. Materials synthesized by the urea homogeneous precipitation method were characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The XRD analysis of as-produced precipitates and nanophosphors fired at temperatures ranging from 950 to 1100 deg. C indicated the presence of highly crystalline cubic Y{sub 2}O{sub 3} with crystallite sizes of {approx}40 nm. SEM and TEM analysis revealed that particles with average diameters of {approx}200 nm and comprised of {approx}40 nm grains were obtained. High-resolution radioluminescence and photoluminescence spectra were used to investigate the unwanted radioluminescence saturation effects associated with the high ionization rate of alpha-particles. Additionally, the radioluminescence intensity as a function of rare-earth ion dopant concentration is investigated for these materials under alpha-particle excitation. The prospect for utilizing these materials as intermediate absorbers in indirect-conversion radioisotope batteries is discussed. - Graphical abstract: The photoluminescence and radioluminesce emission from rare-earth doped Y{sub 2}O{sub 3} nanophosphors are being investigated. Below is a representative image of the photoluminescence from Y{sub 2}O{sub 3}:Eu{sup 3+} (left) and Y{sub 2}O{sub 3}:Tb{sup 3+} (right) under UV-light excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoluminescence and thermoluminescence properties of Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2} nanophosphor

Energy level diagram of Tb{sup 3+} ion in the K{sub 3}Gd(PO{sub 4}){sub 2} host lattice. - Highlights: • First time, a detailed TL and PL study on undoped and Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2} nanophosphor. • Combustion method was employed to synthesize the Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2} nanophosphor. • Mechanism of excitation and emission in undoped and Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2} nanophosphor was given. - Abstract: Tb{sup 3+} doped nanoparticulate K{sub 3}Gd(PO{sub 4}){sub 2} phosphor was prepared by combustion method using urea as a fuel. The structure, optical and luminescent properties of the phosphor were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PL), and thermoluminescence (TL) spectroscopy. In undoped K{sub 3}Gd(PO{sub 4}){sub 2}, the excitation and emission peaks at 273 nm and 323 nm belongs to the {sup 8}S{sub 7/2} → {sup 6}I{sub J(J=7/2)} and {sup 6}P{sub J(J=7/2)} → {sup 8} S{sub 7/2} transitions of Gd{sup 3+} while green emission was observed in the Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2}. TL study was carried out after exposing the samples to γ-radiations (0.1–5 kGy) in the K{sub 3}Gd(PO{sub 4}){sub 2}:Tb{sup 3+} (1.5 mol%). The calculated kinetic parameters were compared with different methods. The band gap of the phosphor was estimated as 5.80 eV. The green shade of the Tb{sup 3+} ion with the CIE coordinates (x, y) as (0.29, 0.54) was in good agreement with the well known green phosphors.

36 MATERIALS SCIENCE↗

Synthesis and photoluminescence study of Dy{sup 3+} doped Sr{sub 3}B{sub 2}O{sub 6}: Nanophosphors

In present paper, the combustion method synthesis of Dy{sup 3+} doped Sr{sub 3}B{sub 2}O{sub 6} nanophosphor and their luminescent properties have been reported. The crystalline structure and morphology of nanophosphors was confirmed and verify by the Xray powder diffraction (XRD) and transmission electron microscopy (TEM). The spectral properties of the Sr{sub 3}B{sub 2}O{sub 6}:Dy{sup 3+} nanophosphors have been studied with the photoluminescence (PL) spectroscopy. Under 300nm excitation, the PL emission shows three peaks at 482, 575 and 664 nm, corresponding to the {sup 4}F{sub 9/2}→{sup 6}H{sub 15/2}, {sup 4}F{sub 9/2}→{sup 6}H{sub 13/2} and {sup 4}F{sub 9/2}→{sup 4}H{sub 11/2} transition states. The 1931 CIE diagram gives the coordinates (x, y) as (0.38099, 0.40418) correspond to the shade of yellowish white emission of the Dy{sup 3+} ion which can be used as w-LED phosphors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MO-G-BRF-07: Optical Characterization of Novel Terbium-Doped Nanophosphors Excited by Clinical Electron and Photon Beams for Potential Use in Molecular Imaging Or Photodynamic Therapy

Purpose: Optical properties of terbium (Tb3+)-doped gadolinium trifluoride (GdF3) nanoplates irradiated by electron and photon beams were investigated for their potential as optical probes. The contribution of induced Cerenkov radiation in exciting the nanophosphors was investigated as well. Methods: The emission spectra of Terbium-doped GdF3 dispersed in hexane, embedded in tissue mimicking phantoms were collected by an optical fiber connected to a CCD-coupled spectrograph, while the samples were irradiated by a medical linear accelerator with electron beams of energies 6, 9, 12, 16, and 20 MeV or X-ray beams of energies of 6, and 15 MV. The contribution of induced Cerenkov radiation in exciting the nanophosphores was investigated in a dedicated experimental apparatus through optical isolation of the samples and also by using 125 kVp X-ray beams whose energy is below the threshold for generating Cerenkov radiation in that medium. Results: Terbium-doped GdF3 nanoplates show characteristic cathodoluminescence emission peaks at 488, 543, 586, and 619 nm, which are responsible for the characteristic f-f transition of terbium ion. In a series of experiments, the contribution of Cerenkov radiation in the luminescence of such nanophosphors was ruled out. Conclusion: We have characterized the optical properties of Terbium-doped GdF3 nanoplates. Such nanocrystals with emission tunability and high surface area that facilitates attachment with targeting reagents are promising in situ light source candidates for molecular imaging or exciting a photosensitizer for ultralow fluence photodynamic therapy. This work is supported by the Department of Radiation Oncology at the University of Pennsylvania, the American Cancer Society through IRG-78-002-28, and the University of Pennsylvania's Nano/Bio Interface Center through NSEC DMR08-32802.

07 ISOTOPE AND RADIATION SOURCES↗

Combustion synthesis and up-conversion luminescence of La{sub 2}O{sub 2}S:Er{sup 3+},Yb{sup 3+} nanophosphors

La{sub 2}O{sub 2}S:Er{sup 3+},Yb{sup 3+} nanocrystalline up-converting phosphors were synthesized by a combustion method at low temperature, using ethanol as pre-ignition fuel and thioacetamide as sulfurizing agent and organic fuel. The phosphors were characterized by powder X-ray diffractometry, scanning electron microscopy, UV/Vis/NIR spectroscopy and fluorescence spectroscopy. Pure and well-crystallized La{sub 2}O{sub 2}S:Er{sup 3+},Yb{sup 3+} nanoparticles, of the order of 50–200 nm, are obtained after a post-treatment in a H{sub 2}S/N{sub 2} flow for 2 h at 1000 °C. The efficient energy transfer from Yb{sup 3+} to Er{sup 3+} results in a strong up-conversion upon excitation at 980 nm. The emission spectra show the intense green emissions corresponding to the ({sup 2}H{sub 11/2}, {sup 4}S{sub 3/2})→{sup 4}I{sub 15/2} transitions and a red emission corresponding to the {sup 4}F{sub 9/2}→{sup 4}I{sub 15/2} transition. Additionally, within the investigated co-doping concentrations, no significant concentration quenching effect and back energy transfer from Er{sup 3+} to Yb{sup 3+} were evidenced. This research highlights the influence of the sulfurization treatment on the purity/crystallinity/morphology of the nanocrystals and the luminescence efficiency. - Graphical abstract: Up-conversion luminescence of La{sub 2}O{sub 2}S:Er{sup 3+},Yb{sup 3+} nanophosphors prepared by combustion synthesis. - Highlights: • La{sub 2}O{sub 2}Er{sup 3+}, Yb{sup 3+} up-converter nanophosphors were prepared by combustion synthesis. • The synthesis method results in phosphor nanoparticles of the order of 50–200 nm. • Energy transfer from Yb3{sup +} to Er{sup 3+} results in a strong UPL upon excitation at 980 nm. • No concentration quenching effect and back energy transfer were evidenced. • We report the importance of the post-treatment in a H{sub 2}S/N{sub 2} flow on UPL efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural characterization, thermoluminescence and EPR studies of Nd{sub 2}O{sub 3}:Co{sup 2+} nanophosphors

Graphical abstract: Display Omitted Highlights: ► Nd{sub 2}O{sub 3}:Co{sup 2+} (1–4 mol%) nanophosphors have been prepared at much lower temperatures. ► Phosphors are well characterized by PXRD, SEM, TEM, FTIR, Raman, UV–vis spectroscopy. ► EPR and thermoluminescence properties were also reported. ► TL intensity increases linearly with γ dose suggesting usage in radiation dosimetry. -- Abstract: Nd{sub 2}O{sub 3}:Co{sup 2+} (1–4 mol%) nanophosphors (15–25 nm) have been prepared via low temperature solution combustion method. Scanning electron micrograph (SEM) shows that the product is highly porous in nature. The stokes line in the Raman spectrum at ∼2000 cm{sup −1} is assigned to F{sub g} mode and the anti-stokes lines are assigned to a combination of A{sub g} + E{sub g} modes. With increase of Co{sup 2+} concentration, the intensity of F{sub g} mode decreases, whereas the combination of A{sub g} + F{sub g} modes completely disappears. Electron paramagnetic resonance (EPR) spectrum exhibits two resonance signals with effective g values at g = 2.25 and g = 2.03. Thermoluminescence (TL) response of Nd{sub 2}O{sub 3}:Co{sup 2+} nanopowders with γ dose 0.23–2.05 kGy was studied. The activation energy (E) and frequency factor (s) are estimated using Chen's glow peak shape method and obtained to be in the range 0.45–1.67 eV and 1.8 × 10{sup 4} to 4.0 × 10{sup 12} s{sup −1}, respectively. It is observed that the TL glow peak intensity at 430 K increases linearly with γ dose which is suitable for radiation dosimetry.

36 MATERIALS SCIENCE↗

Impact of pH and urea content on size and luminescence of upconverting Y2O3:Yb, Er nanophosphors

Highlights: • The granula size, morphology and upconversion luminescence of Y{sub 2}O{sub 3}:Yb{sup 3+}, Er{sup 3+} nanophosphors was tuned via altering the pH values and urea contents. • Steady state and transient spectroscopy along with FTIR analysis are performed to clarify the insight photophysical mechanism. • Nonradiative transition probability modulation due to the OH{sup −} group variation could be responsible for improved R/G intensity ratio. - Abstract: The pH value and urea concentration of precursor dramatically impact on the particle size, morphology and upconversion luminescence of Y{sub 2}O{sub 3}:Yb{sup 3+} , Er{sup 3+} nanophosphors. The lower pH leads to the smaller granula size of the final product, for instance, the crystalline size reduces from ∼30 nm to ∼16 nm as pH value varies from 9.3 to 6.7. The intensity of green (2H11/2, 4S3/2 → 4I15/2) and red emission (4F9/2 → 4I15/2) can be effectively and readily tuned by adjusting the pH value and urea content of precursor solution. The sample derived at pH of 6.7 and urea content of 384 mg/mL exhibits the highest red to green ratio, as a result of more surface defects and hydroxyl residues. Besides, the upconversion lifetime investigation further proved that the quenching and nonradiative relaxation from 2H11/2 and 4S3/2 to 4F9/2 caused by the surface defects could be responsible for the relative enhancement of the red emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

TL kinetics study of LiF nanophosphors for high exposures of gamma-rays

We report the thermoluminescence (TL) kinetics study of LiF nanophosphors synthesized by chemical co-precipitation at 8.00 pH and exposed to high gamma dose. XRD and TEM studies confirm the formation of single phase LiF nanophosphors. TL properties of LiF phosphors irradiated with gamma rays at different doses of 100 Gy - 70 KGy shows a major peak around 395 K in addition to other low intensity peaks. The major peak in the TL glow curve is almost resolved from other peaks, which has been analyzed using Chen's peak shape method to determine the TL kinetic parameters. TL intensity almost increases linearly with gamma dose, however TL glow curve shift slightly to lower temperature values as a function of gamma exposure.

36 MATERIALS SCIENCE↗