Search NASA⌕ Search

SEARCH · Search NASA

Results for “National Energy Technology Lab”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Phase-field modeling of orientation-dependent crack growth in ductile single crystals with anisotropic elasticity

Crack growth in ductile single crystals (DuSCs) is orientation dependent due to the anisotropies of crystal plasticity and elastic tensor. This study develops a phase-field model incorporating both crystal plasticity and crack growth and proposes a general method to decompose the elastic energy into compressive and tensile parts to prevent crack growth under compression in the phase-field description. The phase-field model, in combination with three Euler angles, is employed to simulate orientation-dependent crack growth in DuSCs. The contributions from crystal plasticity and anisotropic elasticity are compared, and the former is found to dominate in the anisotropy of crack growth in copper single crystals. Furthermore, the simulation results demonstrate that crystal orientation strongly affects the heterogeneous distribution of plastic strain and the interaction between plastic strain and crack growth. High-throughput phase-field simulations are performed with exhaustive crystal orientations, and the results are explained based on the anisotropy of the Taylor factor.

Computational Solid Mechanics↗
DOE OSTI2025

Post synthetic amine functionalization of MOF-808 for CO 2 sorption via ligand exchange and Michael addition

Post synthetic modification of metal organic frameworks presents a viable route for amine functionalization which can significantly enhance CO 2 sorption capacity. We present a facile means of amine incorporation using limited synthetic steps and low-cost reagents that results in a high density of primary alkyl amines distributed through a zirconium-based metal organic framework (MOF). Both the MOF synthesis and the post synthetic modification take place under aqueous conditions and result in strongly bound molecular amines available for sorbate interaction throughout the MOF pores. Furthermore, this amine incorporation protocol results in a significantly increased CO 2 capacity compared with the unmodified MOF-808. Specifically, CO 2 isotherms collected at 298 K for the unmodified MOF-808 show uptakes of 0.06, 0.2, and 1.2 mmol/g at 4, 15, and 100 kPa, respectively, which can be compared with 0.3, 0.7, and 2.5 mmol/g for the glycine grafted MOF-808 and 0.5, 0.9, and 2.3 mmol/g for ethylenediamine grafted MOF-808.

Amine sorbent↗
DOE OSTI2024

First principles density functional theory study of tritium species adsorption on Ni(111) surface and diffusion in nickel-sublayer for tritium storage

The nickel-plated zircaloy-4 is used as a tritium ( 3 H) getter in the tritium-producing burnable absorber rods (TPBARs) to capture 3 H produced in the 6 Li-riched annular γ-LiAlO 2 pellet under neutron irradiation. The experimental data and our previous theoretical results showed that the 3 H species produced from the γ-LiAlO 2 pellet were mainly 3 H 2 and 3 H 2 O. These 3 H species diffuse from the surface of the LiAlO 2 pellet across vacuum to the nickel-plated zircaloy-4 getter and then further diffuse into the getter to chemically form metal hydrides. While a number of studies show that oxygen binds strongly as compared to 3 H on the nickel (Ni) layer, the detailed mechanism of 3 H species absorption and diffusion across the Ni plate and Ni/Zr interface are still unclear. By employing density functional theory calculations, here we explored the 3 H 2 and 3 H 2 O species adsorption and dissociation on the Ni(111) surface and diffusion into the Ni sublayer. Our results indicated that the 3 H 2 and 3 H 2 O dissociate on the Ni(111) surface. The NiO x and Ni(O 3 H) x could be formed in the Ni layer due to the higher oxygen (O) diffusion energy barrier and formation of Ni vacancy defects. The oxygen was found to be retained in the Ni layer from diffusing across the Ni–Zr interface. This was revealed by comparing the diffusion barriers for 3 H with O. 3 H was found to have nearly three times smaller diffusion barrier than for O, making 3 H comparatively easier to diffuse through the Ni layer. In conclusion, the obtained results provide guidelines for experimental measurements on 3 H retention behavior in TPBARs and may open further avenues to explore the impurity effects on 3 H diffusion and storage at the Ni/zircaloy interfaces.

Tafen, De Nyago [National Energy Technology Lab. (↗
DOE OSTI2025

Direct Air Capture Case Studies: Sorbent System (Rev. 1)

In 2022, the National Energy Technology Laboratory published a techno-economic assessment (TEA) examining the performance and cost of a generic solid sorbent-based direct air capture (DAC) system, “Direct Air Capture Case Studies: Sorbent System”. Revision 1 of this report builds on the previous effort by updating assumptions to reflect the evolving industry and recent developments in the DAC research and development (R&D) portfolio. Revision 1 of the report also expands the case list to examine a variety of sorbent DAC system configurations. The objective of this series is to present transparent and independent TEAs that can serve as a guideline for sorbent DAC TEA development and highlight potential avenues for cost reductions that can inform R&D. The sorbent considered is not reflective of any one material type; rather, it represents an approximate average of reported material performance in the literature. The base cases presented in this series do not represent optimized systems due to the nascence of the technology and lack of publicly available information. The base cases serve as a reference for informative sensitivity analyses.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Quality Guidelines for Energy System Studies: Process Modeling Design Parameters

The National Energy Technology Laboratory (NETL) conducts systems analysis studies that require a large number of inputs, from ambient conditions to parameters for Aspen Plus ® (Aspen) process blocks. The sheer number of assumptions required makes it impractical to document all of them in each issued report. The purpose of the Quality Guidelines for Energy System Studies (QGESS) is to document the assumptions most commonly used in system analysis studies and the basis for those assumptions. In order to develop the systems analysis models presented in various NETL reports, significant vendor data have been obtained, and these data enhance the model outputs. Much of the vendor data obtained are considered proprietary and not suitable for public release or attribution to a specific vendor. As such, several sub-systems common in NETL reports and their process parameter data are not reported in this document to protect proprietary vendor information. The values and ranges of values presented in this report represent assumptions that have been made in previous studies.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Reservoir Dynamics in Proposed Operational Scenarios Where CO 2 -EOR Fields are Transitioned From CO 2 -Flood Enhanced Oil Recovery to Dedicated Carbon Storage: A Field Case Study

This study models the transition of CO 2 -enhanced oil recovery (CO 2 -EOR) fields to dedicated carbon storage using a generalized reservoir model informed by real field data, SACROC. Through scenario-based simulations, the work evaluates how reservoir depletion levels, boundary conditions, fluid properties, and domain size affect pressure buildup, CO 2 plume migration, and long-term containment performance. The results inform practices for repurposing oil fields into reliable CO 2 storage sites.

02 PETROLEUM↗
DOE OSTI2024

Life Cycle Analysis of Natural Gas Extraction and Power Generation: U.S. 2020 Emissions Profile

This analysis expands upon previous life cycle analyses (LCAs) of natural gas systems performed by the National Energy Technology Laboratory (NETL). It provides a complete inventory of emissions to air and water, water consumption, and land use change. These environmental burdens are detailed for all supply chain steps from natural gas production through natural gas distribution. This package includes the report, the NETL Natural Gas Model, and appendices that include several Excel workbooks and a python script to provide transparent access to the calculations and resulting data.<p>To access the NETL Natural Gas Lifecycle model, visit https://doi.org/10.18141/2476250.</p><p>To access the 2020 Report Appendices, visit https://doi.org/10.18141/2438472.</p>

03 NATURAL GAS↗
DOE OSTI2025

Computed Tomography Scanning and Geophysical Measurements of the Clinton Formation in Ohio

Computed tomography and multi-sensor core logging of core material from twelve Ohio wells held by the Ohio Department of Natural Resources, Division of Geological Survey to make publicly available core information from the Early Silurian Clinton Formation in Eastern Ohio. Describes data available can be accessed from NETL’s Energy Data eXchange (EDX) online system, https://edx.netl.doe.gov/dataset/ct-and-geophysical-data-of-ohio-clinton-sands.

58 GEOSCIENCES↗
DOE OSTI2025

Targeted Chemical Looping Materials Discovery by an Inverse Design

Chemical looping with oxygen uncoupling (CLOU) materials is actively sought for combustion of carbonaceous materials to achieve complete conversion and capture of carbon dioxide. These materials may play a vital role in reducing atmospheric carbon via negative carbon output. However, there is no one‐size‐fits‐all approach as different operating conditions and feedstocks may require different CLOU materials. As a result, the exploration and discovery of high‐performance CLOU materials can be a slow process. To address this challenge, a high‐throughput inverse machine learning workflow that identifies optimum materials from perovskite oxides for a given set of targets is developed—temperature and Gibbs free energy of oxygen formation. The model is trained on high‐throughput density functional theory calculations of CLOU materials and inverts the materials design process using a genetic algorithm to produce realistic substituted SrFeO 3‐δ compositions as output. Using the inverse model, it is able to identify several interesting new families of CLOU materials: Sr 1‐ x A x Fe 1‐ y B y O 3‐δ (e.g., A = Ca or K; B = Mg, Bi, Mn, Ni, Co, Cu, or Zn). These materials have shown promising properties, and some of them even outperform the benchmark material in terms of oxygen release kinetics under relevant CLOU operating conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ammonium-coordinated exchanger (ACE) functionalized silica sorbents for recovering/removing aqueous anionic contaminants

There are limited studies of functionalized silica anion exchange sorbents used for critical/heavy metal recovery/removal relative to polymeric and other inorganic materials. This work features ammonium-coordinated exchanger (ACE) anion exchange particle sorbents prepared by either acid-washing epoxy-crosslinked polyethylenimine (PEI) hydrogen bonded within/to a silica particle sorbent (two-step method) or reacting a di-chlorinated crosslinker, α,α-dichloro-p-xylene (DPX), with PEI within silica (single-step method). Energy dispersive X-ray spectroscopy (EDS) and infrared spectroscopy confirmed the presence of -NH 2 + ···Cl - and -NH 3 + ···Cl - groups, which removed oxyanionic species –arsenate, selenate, chromate, sulfate, phosphate, and nitrate– plus bromide from ideal solutions, authentic acid mine drainage (AMD), and authentic flue gas desulfurization (FGD) wastewater. Affinity of the anions for ACE varied across single- and mixed-element solutions. However, affinity for CrO 4 2- was among the highest in both cases. Total anion uptake by the optimized ACE, PEI-E3-HCl_1.1, reached 1.2 mmol anion/g-sorb. (0.56 mmol CrO 4 2- /g), or ∼2.3 mmol negative charge/g-sorb. This was close to the 0.52 mmol CrO 4 2- /g of a commercial anion exchange resin. Near-consistent removal of 20–80 % of each anion from FGD during an eight-cycle adsorption-desorption (1 M NaCl) test predicted good ACE viability for testing under practical conditions at larger scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Development of Self-Assembly Supports Enabling Transformational Membrane Performance for Cost-Effective Carbon Capture

This final technical report describes work conducted by Membrane Technology and Research, Inc. (MTR) for the U.S. Department of Energy (DOE), National Energy Technology Lab (NETL) on the development of membranes with transformational performance for carbon capture under award number DE-FE0031596. The work was performed from June 1, 2018 through May 31, 2024. For more than a decade, MTR has worked in partnership with DOE to develop an innovative membrane-based CO 2 capture process. This effort has included the first test of membrane modules with coal-fired flue gas at the Arizona Public Services (APS) Cholla plant in 2010; the accumulation of >11,000 hours of flue gas operation for Polaris modules on a bench-scale 1 tonne/day (TPD) system at the National Carbon Capture Center (NCCC); scale-up of first-generation (Gen-1) Polaris to a 20 TPD small pilot system, and successful operation of this system on a flue gas slipstream at NCCC and in integrated boiler testing at Babcock & Wilcox (B&W). Through continued development efforts, a second-generation (Gen-2) version of the Polaris membrane has been scaled-up to pilot production. This membrane offers 70% higher CO 2 permeance with similar selectivity to the base case Polaris. MTR also developed planar modules designed specifically for the low-pressure, high-volumetric flow rate process conditions of flue gas operation. These new modules have significantly lower pressure-drop values compared to the type originally used (spiral-wound modules), which results in significant energy savings. The goal of the work described in this report was to improve on the Polaris Gen-2 membrane with the ultimate aim to reduce the cost of carbon capture. The majority of the effort was to develop improved support membranes for the multi-layer composite structure of MTR’s Polaris membrane. Earlier work at MTR had identified the support structure as limiting membrane permeances, not because the support itself represents a permeation resistance, but because the distribution of pores at the surface of the support imposes a geometric restriction to diffusion in the layers above it. Support membranes were prepared from a range of polymers, including commercially available block copolymers and a custom synthesized block copolymer alternative. The best support membranes developed in this project reduced the geometric restriction by a factor of two to three. These supports then were used to produce Polaris composite membranes with improved permeances. The second topic was to create a high-selectivity version of the Polaris membrane. The high-selectivity version uses a novel selective polymeric material and high selectivities were confirmed in experiments at MTR. The material is not easily made into very thin films. Consequently, the permeances are significantly lower than the Polaris Gen-2 membrane. The utility of this membrane is therefore limited to the carbon dioxide purification step that produces liquid CO 2 . A Technical and Economic Analysis (TEA) was performed for a carbon capture system that uses both advanced membrane types. The TEA shows the novel advanced membranes reduce the cost of capture by 10%, from $63.32/tonne CO 2 to $56.90/tonne CO 2 (2022 USD). Most of the development work was carried out with laboratory-scale casting and coating equipment. A number, but not all, of the improvements identified have been implemented on commercial-scale manufacturing equipment. The focus of future work at MTR is to incorporate the advancements made into the Polaris membrane manufacturing process.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2026

Characterization of γ′/γ″ compact and sandwich type precipitates during long-term high-temperature exposure in Ni-based superalloys

Here, the formation of γ′/γ″ co-precipitates is investigated in Ni-based superalloys with a varying Ti/Al ratio and Ta content and their stability is studied using long-term high-temperature exposure. Transmission electron microscopy and atom probe tomography analyses demonstrate that both higher Ti/Al ratios and increased Ta promote γ″ phase formation, leading to sandwich and compact structures. The compact co-precipitation significantly reduces γ′ precipitate coarsening during 10,000 h exposure at 700°C by restricting elemental diffusion, particularly of aluminum, from the γ matrix to the γ′ phase. For the alloy without a compact structure, and only γʹ precipitates, at the beginning of the exposure, the coarsening rate over 10,000 h was 3.5 times faster than for the alloy with compact γʹ/γʺ precipitates. Evidence of destabilization of the compact morphology was found to occur between 5,000 and 10,000 h exposure and originated from the extensive formation and growth of δ platelets that extended throughout the grains. Thus, the outer layer of the compact, which consists of γʺ, was subjected to the γ″ to δ phase transformation.

gamma double prime↗
DOE OSTI2025

Upcycling Polyethylene Waste into Hybrid Graphitic Porous Carbon Materials Used in High‐Performance Zinc‐Ion Hybrid Capacitors

Polyethylene (PE) waste is a challenge to upcycle into useful materials because this plastic tends to decompose into volatile compounds when heated at relatively low temperatures. In this work, mixtures of PE wastes into a hybrid graphitic porous carbon (HGPC) by a thermal oxidation pretreatment step, with assistance of an inert solid additive (KCl), to functionalize, crosslink, and stabilize the PE waste followed by carbonization and catalytic graphitization steps with a potassium carbonate catalyst, are upcycled. The PE waste‐derived HGPC (PW‐HGPC) has a hybrid structure composed of graphene‐like carbon nanosheets grown on the surface of carbon particles, high porosity with specific surface area, up to 1,763 m 2 g −1 , and good graphitic degree with average Raman I 2D / I G ratios of 0.53. When used as cathode material for zinc‐ion hybrid capacitors, this PW‐HGPC exhibits an excellent specific capacity, up to 126.7 mAh g −1 , at high mass loading of 10 mg cm −2 . Moreover, PW‐HGPC exhibits remarkable cycling stability with capacity retention of >94% after 10 000 cycles. Additionally, the KCl is recycled and reused over five times. This method provides a new solution for upcycling PE wastes into high value‐added carbon materials, not only for zinc‐ion hybrid capacitors but also for other electrochemical energy storage device applications.

hybrid graphitic porous carbon↗
DOE OSTI2024

Abstract for CRADA between NETL and West Virginia University Research Corporation

The National Energy Technology Lab (NETL) will collaborate with West Virginia University to develop and demonstrate a dynamically operated modular, microwave-enhanced catalytic process for the co-production of ammonia and olefins. Ammonia and olefins (e.g., ethylene) are the most widely produced chemicals in the U.S. by volume, but their processes are also the most carbon and energy intensive as they rely on fossil-based feedstocks and combustion of fossil fuels for heating. The project will leverage the unique ability of microwaves to intensify process heating by providing pulsed, targeted energy to active sites of a mixed catalyst bed to convert a mixture of CH 4 /N 2 into ethylene and ammonia. The collaboration will facilitate the development of microwave technology that has the potential to utilize distributed waste resources like shale gas or biogas as well as renewable electricity to produce these valuable chemicals. It is expected that the results will decarbonize chemical production by using renewable energy and waste feedstocks, improve efficiency by reducing unit operations (H 2 production), and de-risk microwave technology for chemical production by demonstrating long-term and dynamic operability. This project was funded by an award from the Department of Energy’s EERE IEDO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mitchell CarbonSAFE

Project update presentation for the 2024 U.S. Department of Energy Fossil Energy and Carbon Management and National Energy Technology Lab Carbon Management Research Project Annual Review Meeting

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Mitchell CarbonSAFE

Project update presentation for the 2025 U.S. Department of Energy Fossil Energy and Carbon Management and National Energy Technology Lab Carbon Management Research Project Annual Review Meeting

Williams-Stroud, Sherilyn [Univ. of Illinois at Ur↗
DOE OSTI2025

Quality Guidelines for Energy System Studies: Capital Cost Scaling Methodology: Revision 4b Report

The National Energy Technology Laboratory (NETL) regularly updates legacy analysis with new studies and cases as the Department of Energy objectives change, technology performance improves, costs are reduced, regulations change, market drivers are established, fuel prices fluctuate, and any number of other relevant factors vary in the market. As legacy studies are updated by NETL, the underlying performance and cost of the cases presented changes, and as such, the methods for interpreting and scaling the cost estimates change. Therefore, it is important that NETL maintain public guidance documents associated with different sets of cost estimates that delineate how a specific set, based on report vintage and/or year published, should be scaled. This Quality Guidelines for Energy System Studies report, providing guidance on capital cost scaling, should generally be applied to NETL case costs included in the report “Cost and Performance Baseline for Fossil Energy Plants Volume 1: Bituminous Coal and Natural Gas to Electricity Revision 4b,” (NETL, 2025) or any cases derived from the cases presented in the referenced report.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Hydrogen-rich syngas production from the steam co-gasification of low-density polyethylene and coal refuse

Gasification provides a promising pathway for transforming waste materials into valuable products, such as fuels and chemicals. Here, this study investigates the steam co-gasification of low-density polyethylene (LDPE) and compressed thickener underflow, representative of coal refuse (CR), in a drop tube reactor. The effects of feed blend ratio (0–100 wt% LDPE) and temperature (800–1000 °C) on syngas composition, tar formation, and process efficiency are examined. The high volatility of LDPE makes it more reactive than CR but also promotes the formation of 2–7 ring aromatic tars. Increasing temperature improves carbon conversion efficiency (CCE), cold gas efficiency (CGE), and syngas yield, although the lower heating value (LHV) of syngas decreases. Hydrogen is the dominant gas product, reaching 59 vol% with the H 2 /CO molar ratio ranging from 2.27 to 4.74. Synergistic effects from alkali and alkali earth metals (AAEMs), particularly K and Ca, in CR ash enhance syngas yield by catalyzing char gasification and tar cracking. Hematite (Fe 2 O 3 ) and ash from sub-bituminous/bituminous coals are explored as tar reforming catalysts. Fe 2 O 3 achieves 100 % tar reforming efficiency, while coal ash, with a lower Fe 2 O 3 content (15 wt%), is less effective at cracking polycyclic aromatic hydrocarbons, particularly naphthalene. These findings demonstrate the flexibility of co-gasification, allowing precise tuning of syngas characteristics for specific downstream applications. Further optimization of waste-derived catalysts could enhance the economic viability of gasification in waste-to-energy processes.

01 COAL, LIGNITE, AND PEAT↗