Search NASA⌕ Search

SEARCH · Search NASA

Results for “National Energy Technology Laboratory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Abstract for CRADA among the National Energy Technology Laboratory, National Technology & Engineering Solutions of Sandia, The Regents of the University of California, and Tri-State Generation and Transmission Association, Inc. (AGMT-0855)

The objective of this CRADA is to facilitate cooperation among Tri-State Generation and Transmission Association, Inc. and collaborators of the Institute for the Design of Advanced Energy Systems (IDAES), including the National Energy Technology Laboratory, Sandia National Laboratories, and Lawrence Berkeley National Laboratory. The goal is to develop steady-state and dynamic optimization models of power plants. Tri-State will provide data related to the design and operation of power plants, which will be used to validate the IDAES team’s models and tools. These models will provide insight into potential improvements which could improve heat rate, reduce operations and maintenance costs, and/or improve reliability of the existing fleet of coal plants in the United States.

20 FOSSIL-FUELED POWER PLANTS↗

Abstract - Cooperative Research and Development Agreement between Atrex Energy, Inc. and National Energy Technology Laboratory

The National Energy Technology Laboratory (NETL) will collaborate with Atrex Energy through CRADA (AGMT-0680) to demonstrate their patent-pending, single step electrode infiltration technique on Atrex commercial-scale tubular solid oxide fuel cells (SOFC). For SOFC to be widely accepted in the commercial domain, the stability of the cells must improve and performance degradation must be mitigated for the technology to be economically viable. NETL’s single-step electrode infiltration technique addresses these challenges by introducing a highly-active nanocatalyst material into the SOFC microstructure, improving cell performance and longevity. Atrex will use NETL’s technology to generate two stacks of cells to effectively demonstrate the benefits at a commercially-relevant scale. Upon detailed analysis of the first stack test results, NETL will optimize the solution chemistry of the nanocatalyst material for an improved formula to incorporate into the second test. This work is funded through a Technology Commercialization Fund that has been awarded to NETL and Atrex as is expected to result in licensing of the technology upon a successful project.

25 ENERGY STORAGE↗

Abstract - Cooperative Research and Development Agreement between Ames National Laboratory and National Energy Technology Laboratory AGMT-0609

The goal of this project is to develop a merged environment for simulation and analysis (MESA) at the National Energy Technology Laboratory’s (NETL) Hybrid Performance (Hyper) project laboratory. The MESA sensor lab developed as a component of this research will provide a development platform for investigating: 1) advanced control strategies, 2) testing and development of sensor hardware, 3) various modeling in-the-loop algorithms and 4) other advanced computational algorithms for improved plant performance using sensors, real-time models, and complex systems tools.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Abstract for CRADA between National Energy Technology Laboratory and OCO Chem

The National Energy Technology Laboratory (NETL) and OCO Chem (Participant) will collaborate in the development and scaling of electrochemical technologies that convert carbon dioxide (CO 2 ) into formic acid. This CO 2 -derived product is an industrially relevant chemical with various agricultural and industrial applications, as well as an emerging liquid hydrogen carrier 53 g of H 2 per liter. The use of formic acid as a liquid hydrogen carrier eliminates the challenges of long-distance H 2 transport and storage, which could lead to additional use as a precursor in the “green” energy and chemical sectors. Conventional formic acid production relies on carbon-intensive processes that use fossil fuel-derived starting materials. The collaboration will facilitate the deployment of technologies that convert captured CO 2 , water, and excess renewable electricity into carbon-neutral formic acid. The anticipated results will reduce the carbon footprint of conventional industrial processes, allow more sustainable use of our Nation’s fossil energy resources, and advance NETL’s ongoing CO 2 utilization efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Abstract for CRADA between National Energy Technology Laboratory and Eion Corp

The National Energy Technology Laboratory (NETL) and Eion Carbon (Participant) will collaborate on a lifecycle assessment (LCA) and techno-economic assessment (TEA) of Eion Carbon’s carbon dioxide (CO 2 ) removal process. Eion Carbon’s process removes atmospheric CO 2 using high efficiency, fast-weathering minerals applied on farmland. Eion Carbon’s patented direct measurement process delivers permanent, verifiable carbon removal and diverse environmental co-benefits. This collaboration with NETL aims to produce corroborated assessment reports that will play an instrumental role in follow on funding applications and customer evaluations.

54 ENVIRONMENTAL SCIENCES↗

Abstract for CRADA between National Energy Technology Laboratory and Giner Inc.

The National Energy Technology Laboratory (NETL) and Giner Inc. will collaborate in the development and scaling of an electrochemical system to capture and regenerate CO 2 from air with high efficiency and low energy input under an awarded project from the Department of Energy’s Direct Air Capture Pre Commercialization Technology Prize. Giner’s prototype design utilizes a hydroxide-based sorbent to capture the CO 2 from ambient air and convert it to carbonate in solution. The carbonate is then regenerated electrochemically back into CO 2 , releasing a purified, concentrated CO 2 stream ideal for downstream utilization. This process recycles the capture solution and all generated byproducts, including water and hydrogen, making it an extremely resource- and energy-efficient system. This collaboration will facilitate the deployment of this cost-effective solution for direct air capture of CO 2 to enable reduction in global greenhouse gases and advance NETL’s ongoing CO 2 conversion efforts.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Abstract for CRADA between National Energy Technology Laboratory and Elysia LLC

The National Energy Technology Laboratory (NETL) and Elysia Labs LLC are embarking on a collaborative project to develop and evaluate a low-cost, high-performance carbon dioxide capture process for the burgeoning Direct Air Capture (DAC) industry. The partnership will focus on developing an electrospun fiber based air contactor that promises higher efficiency and lower costs to set a new standard in the DAC field. The expected outcomes of this collaboration include the creation of a DAC contactor that significantly outperforms existing technologies in cost, capacity, cycle time, regeneration energy, and durability. This project is a result of an awarded project from the Department of Energy’s Direct Air Capture Pre-Commercialization Technology Prize.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Abstract for CRADA between National Energy Technology Laboratory and Nūxsen LLC

The National Energy Technology Laboratory (NETL) and Nūxsen are embarking on a collaborative project to research a low-cost, high-performance chemical sorbent for the rapidly growing Direct Air Capture (DAC) industry. The expected outcomes of this collaboration include the production and testing of a carbon dioxide sorbent material with improved cost, capacity, cycle time, regeneration, and durability. This project is the result of funding provided to Nūxsen from the Department of Energy’s Direct Air Capture Pre-Commercialization Technology Prize.

54 ENVIRONMENTAL SCIENCES↗

Abstract for CRADA between National Energy Technology Laboratory and TOPTICA Photonics, Inc.

The National Energy Technology Laboratory (NETL) and Toptica Photonics (Participant) will collaborate to demonstrate the application of a frequency-comb laser (dual-comb spectroscopy) in an optically accessible rotating detonation engine (RDE). RDEs are a next-generation energy conversion technology which are well-suited to hydrogen usage and have the potential to significantly increase the efficiency of gas turbine engine power cycles. However, critical information is needed about the high temperature and pressure detonation wave, which represents an extremely challenging diagnostic environment. Dual-comb spectroscopy can be used to characterize the pressure-broadened IR absorption features at MHz rates, providing information not possible with conventional tunable diode laser (TDL) technologies. This collaboration will, for the first time, demonstrate application of dual-comb spectroscopy within the combustion annulus of a hydrogen-air RDE. If successful, the data generated will help to accelerate commercialization of RDE technologies in support of decarbonizing our nation’s energy sector.

08 HYDROGEN↗

Final Report – Cooperative Research and Development Agreement between National Energy Technology Laboratory and Solar Turbines Incorporated

The National Energy Technology Laboratory is developing the Raman Gas Analyzer (RGA) to be a fast, non-destructive instrument for on-line measurement of gas composition. The RGA prototype has been demonstrated to have an extremely fast response (<1 second) multi-gas analysis capability. All but the noble gases are Raman active, but Raman interaction is weak with gas phase substances. The RGA uses a reflectively lined capillary as the optical cell in a patented configuration, providing both a small sample volume for fast gas exchange, and a much greater Raman signal collection than traditional instrument configurations. This allows very fast measurement of fuel gases (hydrogen, methane, ethane, propane) as well as other common industrial gases (including CO, CO2, N2, O2, H2O). The RGA provides a new enabling technology for faster, smarter process control based on the chemical composition of the gases in the process, such as improving fuel flexibility and efficiency for power generation systems. NETL has constructed a field prototype of the RGA to test the instrument performance in various applications in fossil energy. Through this CRADA, the RGA prototype operation was tested using hydrocarbon mixtures and hydrogen on a combustor test rig for potential use in gas turbine engine testing. The testing was performed at the Solar Turbines Incorporated Harbor Drive facility in downtown San Diego, CA on December 3-7, 2018. The RGA was installed outside a combustor test bay, with a ¼" sample line connected from a point shortly upstream of the test combustor. The combustion test building online gas chromatograph reported analysis of a sample every 6 minutes. During testing, seven test conditions of pure gas or gas mixtures were supplied to a pressurized combustion test rig. A sample of the fuel gas was continuously analyzed using the RGA with a 1 second measurement and reporting time. For each test condition, once the steady condition was reached, the composition of the gas from the RGA measurements is reported, along with the expected composition from the flow meters, and the composition reported by the online gas chromatograph (GC). During this testing, the real-time measurement capability of the RGA was readily apparent. The composition changes occurring in real-time could be followed and observed to correspond to combustion behavior changes on the video monitor at the operator station. The largest concentration species were tracked well through the tests; however, from comparison of the RGA one-second data with the GC steady-state points, it appears the RGA had some difficulty with quantifying hydrocarbon mixtures, especially when some of the hydrocarbons were at low concentration. The difficulty was particularly noted for ethane and butane in these tests. The NETL team intends to address this in 2019. Moderate concentrations of nitrogen, carbon dioxide, and hydrogen (>10%) were readily observed in the spectral data and quantified closely to the GC measurements. While calibration data for propylene was collected in preparation for this testing, it was not observed during the testing, even when the test conditions had high concentrations of propane.

Source record↗

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Princeton University (Abstract)

The National Energy Technology Laboratory (NETL) and Princeton University will collaborate in the development of microwave-plasma technology to convert methane into hydrogen and valuable solid carbon materials. The effort will combine NETL’s vast resources for microwave-enhanced process development, characterization, and design with Princeton University’s extensive expertise in the study of non-equilibrium plasmas employing supersonic nozzles. Lab-scale experiments will be conducted for different conditions to convert and compare their respective performance in hydrogen production. Computational modeling will be performed to verify results from experimental studies conducted in both labs.

08 HYDROGEN↗

Abstract for CRADA between National Energy Technology Laboratory and Colonial Pipeline Company

The National Energy Technology Laboratory (NETL) and Colonial Pipeline Company (Participant) will collaborate in the field demonstration of optical fiber sensor systems developed at NETL on Participant’s fuel pipeline. The optical fiber sensor technologies are capable of distributed temperature and strain sensing, distributed acoustic sensing, and ultrasensitive acoustic sensing. Real-time monitoring of these parameters enables pipeline integrity monitoring, security monitoring, flow rate monitoring, etc. Successful demonstration on a real fuel pipeline at Participant’s facilities will validate the sensor technologies and installation methods at a real scale. This effort aligns with NETL’s mission in reliable and sustainable energy and reducing environmental effects due to pipeline failures.

42 ENGINEERING↗

Abstract for CRADA between National Energy Technology Laboratory and OMC Hydrogen, Inc

The National Energy Technology Laboratory (NETL) and OMC Thermochemistry (Participant) will collaborate in the development of a better understanding of the current domestic data of TRL 7+ syngas conversion technologies and their current and potential markets. This will provide a basis for future comparative life cycle emission and techno-economic evaluations with the participant’s syngas production process using industrial and biogenic CO2 conversion approaches.

10 SYNTHETIC FUELS↗

Abstract for CRADA between National Energy Technology Laboratory and Malachite Technologies, Inc.

The National Energy Technology Laboratory (NETL) and Malachite Technologies, Inc (MTI) will collaborate in the demonstration of early-stage feasibility of a process which will produce JP-10 fuel compliant with Mil Spec MIL-DTL-87107E. Our process will convert, by means of a plasma reactor, carbon dioxide (CO 2 ) feedstock which, along with hydrogen, will serve as a feedstock for an integrated Fischer-Tropsch (FT) reactor. A customized zeolite catalyst will support a highly selective production of JP-10 in the FT reactor.

10 SYNTHETIC FUELS↗

Abstract for CRADA between National Energy Technology Laboratory and ClearSign Technologies Corporation

The National Energy Technology Laboratory (NETL) and ClearSign Technologies Corporation (Participant) will collaborate in the development of a preliminary LCA for the scaling of a hydrogen burner product currently in proof of concept and primarily developed for chemicals processing at refineries. The current combustion product has been tested at 80% hydrogen content (20% natural gas) and maintains the NOx 97% improvement vs incumbent technologies, yet the GHG emissions of the product and use case in refining to chemicals processing would be the focus of this preliminary LCA. The Participant has noted areas where they expect environmental improvements relative to alternatives, but these improvements have not been quantified to date. The collaboration will facilitate characterizing the emissions improvement comparative to some selected incumbent technologies during the deployment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Abstract for CRADA between National Energy Technology Laboratory and Blacksand Technology, LLC

The National Energy Technology Laboratory (NETL) and Black Sand Technology, LLC (Participant) will collaborate in the optimization of low-cost manufacturing routes to produce ultralow-oxygen reactive metal powders of M=Ti, Zr, and Nb using Mg or Ca as reduction agents. Reactive metals have a strong chemical affinity to oxygen, making it very challenging to produce high-purity metal powders of these elements with extremely low oxygen content. This project integrates multiscale modeling and experimental validation to provide fundamental understanding of the thermodynamic limits on the deoxygenation process through HDH and optimize the key deoxygenation parameters to achieve ultralow oxygen content ≤0.1 wt.% in the reactive metal powders. The collaboration will significantly expedite the optimization of deoxygenation processes, reducing the timeline for refining deoxygenation techniques for Ti, Zr and Nb and other reactive refractory metals by about 0.5 and 2 years, respectively. This accelerated timeline translates to substantial cost savings estimated at $\$$3 million in research and development expenditures.

36 MATERIALS SCIENCE↗