Search NASA⌕ Search

SEARCH · Search NASA

Results for “National Transportation Safety Board”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Updated General Aviation Non-Airport Crash Density Values Using Data Obtained from the U.S. National Transportation Safety Board for 2000 through 2019

This report documents the calculation of the General Aviation (GA) non-airport crash density for Department of Energy (DOE) sites and power generating facilities licensed by the Nuclear Regulatory Commission (NRC) using the methodology outlined in DOE-STD-3014-2006, Accident Analysis for Aircraft Crash Into Hazardous Facilities. The results of this report will be used by the American Nuclear Society (ANS) for the development of ANS standard 2.36, Accident Analysis for Aircraft Crash into Reactor and Nonreactor Nuclear Facilities.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2026

Updated Commercial Aviation Non-Airport Crash Density Values Using Data Obtained from the U.S. National Transportation Safety Board for 2000 through 2019

This report documents the calculation of the commercial aviation (CA) non-airport crash density for Air Route Traffic Control Center (ARTCC) area associated with the Contiguous United States (CONUS) using the methodology outlined in the Department of Energy (DOE) Standard 3014-2006, Accident Analysis for Aircraft Crash Into Hazardous Facilities. For analytical purposes, the CA aircraft fleet is comprised of aircraft engaged in operations under Title 14 of the Code of Federal Regulations (CFR) Part 121 (i.e., Air Carrier) and Part 135 (i.e., Air Taxi).

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2025

Dynamic response of 17-4 stainless steel as a function of manufacturing method and heat treatment

We present a series of plate-impact experiments on 17-4 stainless steel to study the effect of manufacturing method and heat treatment on the Hugoniot elastic limit (HEL), Hugoniot, phase transformation stress, and spallation strength. Two traditional manufacturing methods were considered, wrought processing and casting, as well as two additive manufacturing methods, laser powder-bed fusion (LPBF) and wire-fed electron beam (EBAM). For both LPBF and EBAM 17-4 stainless steel variants, two billets were printed, enabling the application of two unique heat treatments. The HEL stress depended heavily on the thermal history, with the HEL increasing after the formation of Cu-rich precipitates via heat treatment. The Hugoniot response both below and above the phase transition was unaffected by the manufacturing method or heat treatment. The phase transition stress depended heavily on the thermal history, with its variation being attributed to the presence of various microstructural features. This is supported by a marked increase in the phase transition stress after precipitation hardening. These results suggest that the notion of the phase transition stress being dictated by bulk composition is an oversimplification and the stress fields generated by the meso-scale structure are a dominant force. The spallation strength was lower in the cast material compared to all other 17-4 stainless steel variants due to the presence of brittle δ-ferrite inclusions. Additionally, a drop in the tensile strain-rate was observed in the spallation response above the phase transition stress, which was hypothesized to stem from the kinetics of the reversion to the low-pressure phase during spall.

Compressive stress↗
DOE OSTI2025

Domestic and International Consensus Standards for Nuclear Criticality Safety - Overview & Status

The domestic and international consensus standards for nuclear criticality safety (NCS) were developed based on the lessons-learned from process criticality accidents. These consensus standards were developed to reduce the rate of process criticality accidents in facilities that process, store, handle, or transport fissionable materials by hand. After a significant increase in criticality accidents through the mid-1960s, the rate of criticality accidents decreased as a result of these standards, and the criticality accident rate is extremely low from an industrial safety perspective. The last known criticality accident inside the United States was in 1978 (nearly 47 years ago) at the Idaho Chemical Processing Plant, and outside the United States, an accident occurred at Tokai-mura, Japan, in 1999 (almost 26 years ago). The domestic consensus standards for NCS include the American National Standards (ANS) that are prepared and published by the American Nuclear Society and approved by the American National Standards Institute (ANSI). The ANS Standards Board, the NCS Consensus Committee, and the ANS-8 Subcommittee oversee the development and maintenance of these standards. There are currently 18 standards in the ANS-8 series. Nine ANS-8 standards are either in revision mode or planned for revision. A new standard for the use of nondestructive assay measurements (ANSI/ANS-8.28-2024) for NCS was approved in March of 2024. The international consensus standards for NCS calculations, procedures, and practices are maintained and developed within the International Organization for Standardization, Technical Committee 85 “Nuclear Energy,” Subcommittee 5, “Nuclear Fuel Technology,” and Working Group 8, “Nuclear Criticality Safety.” Eleven standards are currently available, four standards are proposed for revision, and four standards are at various stages of development. This paper provides the NCS community with a high-level overview and status report of domestic and international NCS consensus standards to stimulate interest and to support their continued development.

Bowen, Douglas G [ORNL] (ORCID:0000000212460026)↗
DOE OSTI2026

Cobalt-free and high-rate stable 5V lithium nickel manganese oxide spinel cathodes enabled via surface oxygen vacancies

Spinel LiNi 0.5 Mn 1.5 O 4 offers both the high-rate, low-cost and safety advantages of LiFePO 4 and the high energy density of LiNiₓMnᵧCo₁₋ₓ₋ᵧO₂ and LiNiₓCoᵧAlzO₂ cathodes. However, the large operating voltage of these materials induces electrolyte oxidation, which degrades the interface and drives Mn dissolution. These reactions are further exacerbated at high rates due to temperature rise. In this study, we discover that ammoniacal treatment followed by annealing introduces a high density of oxygen vacancies in the “near-surface region” of LiNi 0.5 Mn 1.5 O 4 particles. These vacancies release electrons changing the oxidation state of Mn and suppressing its tendency to oxidize the electrolyte. Further, these vacancies enhance the electrode’s electronic conductivity (by ∼3-fold) and Li + diffusivity (by ∼2-fold) greatly improving charge transport, especially when operated at high rates. This results in an across-the-board improvement in self-discharge, specific capacity, energy density, rate capability, coulombic efficiency and cycling stability. When cycled at ∼200 mA g −1 , the capacity fade averaged over 3000 cycles for the surface vacancy-enriched material is ∼0.0167% per cycle compared to an order of magnitude higher fade rate for the baseline material. In conclusion, these findings reveal the potential of targeted surface oxygen vacancy doping to develop cobalt-free and high energy density cathodes that tolerate fast charging and deliver improved cycle life.

Cobalt-free cathodes↗