Search NASA⌕ Search

SEARCH · Search NASA

Results for “Neutron Streaming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A Neutron Streaming Problem to Test Rattlesnake Methods for TREAT

This work demonstrates the progress made at Idaho National Laboratory in the neutronic modeling of neutron streaming in the TREAT reactor core. The streaming in the slotted elements is important because of its effect on the axial distribution and energy deposition in the experiment vehicle. Two methods implemented in Rattlesnake: 1) tensor diffusion coefficients and, 2) super-homogenization, yield much improved power distributions using a diffusion solution with homogenized fuel elements. The RMS difference in the power distribution decreases below 0.661% compared to a reference Monte Carlo simulation. The maximum differences are within 1.5% of this reference. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Neutron Streaming Problem to Test Rattlesnake Methods for TREAT

This work demonstrates the progress made at Idaho National Laboratory in the neutronic modeling of neutron streaming in the TREAT reactor core. The streaming in the slotted elements is important because of its effect on the axial distribution and energy deposition in the experiment vehicle. Two methods implemented in Rattlesnake: 1) tensor diffusion coefficients and, 2) superhomogenization, yield much improved power distributions using a diffusion solution with homogenized fuel elements. The RMS difference in the power distribution decreases below 0.661% compared to a reference Monte Carlo simulation. The maximum differences are within 1.5% of this reference.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

ITER Neutronic Challenges for Upper Port 14

The future of magnetically confined nuclear fusion facilities is extremely promising, yet there are extensive challenges that still have to be addressed. These challenges range significantly, but one of the more difficult challenges is nuclear shielding and nuclear safety. The challenge of adequately shielding neutrons is especially prevalent at ITER. Throughout the lifetime of ITER there will be large quantities of high energy (14.1- MeV) neutrons generated, with the expected neutron lifetime fluence to be around 0.3 MW.a/m{sup 2}. For such a large neutron fluence, shielding is a very important factor for the operation of ITER. Not only the shielding of the people that will be supporting the facility, but also to the components that surround the plasma. Without the many diagnostics that are planned for ITER operation, ITER would not be able to function. But with the inclusion of the diagnostics and the many apertures required, an interesting neutronics environment is created. This environment is like nothing we have seen or are currently able to create on the earth. Due to this unknown, significant time and effort is being placed on the research, design, and analysis of the ITER neutronics environment. A neutron has an interesting life after birth within the plasma on ITER. There are many different paths and reactions that can take place; so many, that trying to simplify the problem has brought significant unknowns into the analysis. Due to unique material compositions, neutron streaming paths, and neutronics requirements, the simplest of ITER neutronics calculations have to be thought out in great detail. Placing a new hole for a diagnostic creates a new streaming path; internal components must survive a high fast neutron flux, while external components face a completely different neutron energy spectrum of a high flux; material activation within human accessible areas must be maintained to an allowable level. As the complexity of the ITER device grows, so does the complexity of the neutronics challenges.

61 RADIATION PROTECTION AND DOSIMETRY↗

Investigation of first mirror heating for the collective Thomson scattering diagnostic in ITER

Collective Thomson scattering (CTS) has the capabilities to measure phase space densities of fast ion populations in ITER resolved in configuration space, in velocity space, and in time. In the CTS system proposed for ITER, probing radiation at 60 GHz generated by two 1 MW gyrotrons is scattered in the plasma and collected by arrays of receivers. The transmission lines from the gyrotrons to the plasma and from the plasma to the receivers contain several quasioptical mirrors among other components. These are designed to produce astigmatic beam patterns in the plasma where the beam shapes will have a direct impact on the signal strength of the diagnostic, the spatial resolution, and the robustness of probe and receiver beam overlap against density excursions. The first mirror has a line of sight to the plasma and is thus exposed to severe neutron streaming. The present neutronics and thermomechanical modeling of a first mirror on the high field side indicates that the mirror curvature may warp due to heating. This may alter the beam quality, and therefore, thermal effects have to be accounted for during the design of the mirror. The modeling further demonstrates that thin mirrors are superior to thick mirrors from a thermomechanical point of view.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Uncollided Flux Implementation for Discrete Ordinates Radiation Transport Solutions in Rattlesnake

Simulation of neutron streaming over long distances in optically thin narrow pipes sur- rounded by optically thicker materials that can absorb and/or scatter neutrons presents a simulation challenge to most neutron transport methods. Without sophisticated variance reduction techniques, this problem can be intractable for Monte Carlo techniques. Deterministic methods are often limited due to large angular discretization errors, this phenomenon is commonly known as ray effects. The uncollided component of the angular flux solution is the most anisotropic part and it can be difficult for discrete ordinate methods to accurately represent. The number of discrete angles required to overcome these ray effects is prohibitively large for the hodoscope configuration. Hence, other approaches must be taken to better simulate neutron streaming within the hodoscope collimator slots. In this report, we present an algorithm for semi-analytical calculation of the uncollided flux.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design of microfission chamber for ITER operations

Microfission chambers (MFCs) are one of the most important diagnostics for measuring neutron source strength in ITER. Using MFCs for high-power operations (fusion power of 100 kW-1 GW) and for low-power operations (<100 kW) in combination is one way to fulfill the target measurement requirements of ITER. The MFCs for high-power operations will be installed behind blanket modules in both the upper and lower outboard regions of the vacuum vessel so as to be insensitive to changes in the position of the plasma. For low-power operations, one possible location of MFCs is inside the equatorial (EQ) port. The effect of streaming neutrons and of changes in the position of the plasma on the responses of MFCs is estimated based on a neutron Monte Carlo calculation using the MCNP Version 5 code. Results suggest that the effect of streaming neutrons should be taken into account if the MFCs for high-power operations are installed closer than 20 cm to the gap between blanket modules. It has also been found for MFCs of low-power operations that the averaged output of the MFCs installed at the top and bottom of the EQ port is sensitive to horizontal plasma shifts but not to vertical shifts. This finding suggests that corrections based on the position of the plasma center will be needed for the absolute measurement of neutron source strength.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Comparison of Reg. Guide 1.99 fluence attenuation methods

U.S. Regulatory Guide 1.99 Revision 2 (U.S. Nuclear Regulatory Commission, 1988, 'Radiation Embrittlement of Reactor Vessel Materials,' Regulatory Guide 1.99, Revision 2, Washington, D.C.) provides for the use of two substantially different methods for determining through-wall fluence in nuclear reactor pressure vessels. One method is a generic attenuation curve based on a simplistic exponential decay equation. Partly due to the simplicity of its application, the generic attenuation method is predominantly used for licensing calculations. However, it has a limitation in that at increasing distances away from the core belt-line, it becomes increasingly less accurate because it cannot account for neutron streaming effects in the cavity region surrounding the pressure vessel. The other attenuation method is based on a displacement per atom (dpa) calculation specific to the reactor vessel structure. The dpa method provides a more accurate representation of fluence attenuation through the reactor pressure vessel (RPV) wall at all elevations of the pressure vessel because it does account for neutron streaming in the cavity region. A requirement for using the dpa method, however, is an accurate flux solution through the RPV wall. This requirement has limited the use of traditional transport methods, such as discrete ordinates, that are limited by their treatment of cavity regions (i.e., air) outside the pressure vessel wall. TransWare Enterprises, under the sponsorship of EPRI and BWRVIR has developed an advanced three-dimensional transport methodology capable of producing fully converged flux solutions throughout the entire reactor system, including in the cavity region and primary shield structures. This methodology provides an accurate and reliable determination of through-wall fluence in boiling water reactor (BWR) and pressurized water reactor (PWR) pressure vessels, thus allowing the dpa method to be implemented with high reliability. Using this advanced 3-D methodology, this paper presents comparisons of the generic and dpa attenuation methods at critical locations in both BWR and PWR pressure vessel walls. (author)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A novel concept of QUADRISO particles : Part II Utilization for excess reactivity control.

In high temperature reactors, burnable absorbers are utilized to manage the excess reactivity at the early stage of the fuel cycle. In this paper QUADRISO particles are proposed to manage the initial excess reactivity of high temperature reactors. The QUADRISO concept synergistically couples the decrease of the burnable poison with the decrease of the fissile materials at the fuel particle level. This mechanism is set up by introducing a burnable poison layer around the fuel kernel in ordinary TRISO particles or by mixing the burnable poison with any of the TRISO coated layers. At the beginning of life, the initial excess reactivity is small because some neutrons are absorbed in the burnable poison and they are prevented from entering the fuel kernel. At the end of life, when the absorber is almost depleted, more neutrons stream into the fuel kernel of QUADRISO particles causing fission reactions. The mechanism has been applied to a prismatic high temperature reactor with europium or erbium burnable absorbers, showing a significant reduction in the initial excess reactivity of the core.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Neutronics for diagnostics in ITER - Paper 121

ITER, currently under construction in the south of France, will be the first tokamak producing large amounts of neutrons and having a fusion energy gain factor, which is the ratio between the fusion power produced and the input power necessary to maintain the plasma, greater than 10. ITER will be able to generate 500 MW of fusion power, from which 400 MW are 14.1 MeV neutrons from the Deuterium-Tritium fusion reactions in the thermonuclear plasma. For such nuclear machine neutronics are of paramount importance, being a design driver for many of its components, in particular its Ports and its numerous Diagnostics, for which the influence of neutronics is especially important in three main areas: - Shielding: there is a strong need to provide nuclear shielding to areas where human access is foreseen for maintenance. Also, to minimize any impact in the primary shielding components (blankets) in order to avoid significant increases in the heating of the Vacuum Vessel (VV) and Superconductive Coils. - Sensors and diagnostic components: most of the diagnostics have sensitive components that need to be shielded against radiation to survive. Efficient shielding is not always possible, and the radiation levels are usually the decisive factor for selecting the most appropriate component. - Neutron measurements: a large set of neutron diagnostics will be implemented to measure the neutron production and its emissivity profile. Although the scale and performance of ITER will not be very far from a commercial reactor, it is ultimately an experiment to improve the understanding of reactor-grade tokamak plasmas and their effect on plasma facing components. To accomplish this task, large efforts are being dedicated to design over 45 different diagnostics systems. This paper gives an overview of the main activities related to neutronics within the ITER Diagnostics Division. They include the neutron streaming problems in the Ports and the common neutronics issues of the diagnostics housed inside them, as well as the challenges of the in vessel diagnostics. Also the special calculations needed for the neutron diagnostics. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Uncollided Flux Techniques for Discrete-Ordinate Radiation Transport Solutions in Rattlesnake

One of the only real-time-resolved measurement tools used at the Transient Test Reactor (TREAT) is the fast-neutron hodoscope. The hodoscope was used for monitoring and measuring fuel motion during a transient pulse. The hodoscope is a line of sight detection and imaging system that provides both temporal and spatial resolution of fuel motion during transients, and in-place measurement of fuel distribution during and after transient experiments. However, the hodoscope relies on fast neutron streaming out of the reactor core, which provides a challenge to transient modeling and simulation. However, use of a first collision source approach can be used to overcome this shortcoming. Hence, the TREAT modeling and simulation team has initiated research to implement such capabilities in the neutron transport code Rattlesnake. This report reviews uncollided flux techniques (first and last collision methods) to be implemented in the Rattlesnake SN code in order to mitigate ray effects in modeling the TREAT reactor+hodoscope system. Angular discretization techniques (SN and PN) for the transport equation are notoriously poor at capturing effectively streaming effects.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Heterogeneous Neutron Leakage Model for PWR Pin-by-pin Calculation

In the last few decades, the nodal diffusion calculation accompanied with the assembly homogenization has been widely employed. The single assembly calculation with the reflective boundary condition (BC) would be carried out to determine the assembly-homogenized parameters. Because of the reflective BC, no axial and/or radial leakage rates have been taken into accounted for the lattice calculation. To represent the global influence of the reactor core on an assembly calculation, one mostly frequently uses a procedure called leakage model to approximately take into account the absorption due to the macroscopic structure of the physical flux in a heterogeneous situation. For the assembly homogenization, this absorption is introduced as the product of the leakage coefficient and the buckling obtained for an equivalent homogeneous medium using the well-known homogeneous B1 theory. Clearly, this is an imperfect representation of leakages in a heterogeneous medium. However, the errors introduced by the foregoing procedure are small for the whole? -assembly homogenization in a PWR. When it comes to the pin-by-pin calculation, it is not the case. The leakage rate? will be affected by the neutron streaming effect caused by the heterogeneity of the assembly. Especially when poison pins or empty channels are present, the streaming effect becomes important. The errors introduced appear particularly visible. The heterogeneous leakage model? which assumes that the neutron flux is variational and the leakage rate is not uniform over the lattice pitch is a more appropriate choice. When the heterogeneous leakage model is applied in the lattice calculation for the pin-cell homogenization, the pin-homogenized problem would be changed compared with the original assembly problem without any homogenization technique. So, the Cooperation of the heterogeneous leakage model with the pin-cell homogenization theory is unsettled. In this paper, both homogenous and heterogeneous leakage models are evaluated in pin-by-pin calculation. Their implements used in pin-cell homogenization of the lattice calculation are studied. The diffusion coefficient obtained from transport cross-section and the space-dependent leakage coefficient together with the two leakage models are analyzed for the practical reactor-core applications.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comprehensive Analysis of Streaming and Shutdown Dose Rate Experiments at JET with ORNL Fusion Neutronics Workflows

Current experimental fusion systems and conceptual designs of fusion pilot plants (FPPs) are growing in complexity and size. Several radiation metrics are crucial to the safe operation of fusion machines, including neutron flux streaming through openings and the shutdown dose rate (SDDR). Most current designs of advanced experimental fusion systems—and the most probable candidates for FPPs—are based on the tokamak concept, which is prone to neutron streaming through the myriad openings needed for diagnostic and support systems. SDDR is caused by decay gamma rays from radionuclides that become activated by neutrons during the operation of a fusion system that use deuterium-deuterium (DD), tritium-tritium, or deuterium-tritium plasma. Because computational tools have become essential for determining these radiation metrics, they must be validated against reliable and applicable experimental data. Experiments at the Joint European Torus (JET) provide a unique source of experimental data for validating computational tools and nuclear data used to determine SDDR and neutron fluxes in streaming-dominated geometries. Here, this paper presents the comprehensive analysis of the high-performance DD JET SDDR, and streaming experiments performed using Oak Ridge National Laboratory (ORNL) fusion workflows. The computational results were compared with experimental results that consist of online SDDR measurements with ionization chambers and neutron fluence streaming measurements using thermoluminescent detectors. The ratio of calculated-to-experimental SDDR values ranges from 0.6 to 2.5, and the streaming results range from 0.5 to 8.0. Future work will include analyzing the JET 2021 DTE2 campaign alongside the integration of the Shift Monte Carlo transport code into all ORNL fusion neutronics workflows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using gamma-ray emission to measure areal density of ICF capsules

Fusion neutrons streaming from a burning ICF capsule generate gamma rays via nuclear inelastic scattering in the ablator of the capsule. The intensity of gamma-ray emission is proportional to the product of the ablator areal density ('{rho}R') and the yield of fusion neutrons, so by detecting the gamma rays we can infer the ablator areal density, provided we also have a measurement of the capsule's total neutron yield. In plastic-shell capsules, for example, {sup 12}C nuclei emit gamma rays at 4.44 MeV after excitation by 14.1-MeV neutrons from D+T fusion. These gamma rays can be measured by the Gamma Reaction History (GRH) experiment being built at the National Ignition Facility (NIF). A linear error analysis indicates the chief sources of uncertainty in inferred areal density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using gamma-ray emission to measure areal density of inertial confinement fusion capsules

Fusion neutrons streaming from a burning inertial confinement fusion capsule generate gamma rays via inelastic nuclear scattering in the ablator of the capsule. The intensity of gamma-ray emission is proportional to the product of the ablator areal density ({rho}R) and the yield of fusion neutrons, so by detecting the gamma rays we can infer the ablator areal density, provided we also have a measurement of the capsule's total neutron yield. In plastic-shell capsules, for example, {sup 12}C nuclei emit gamma rays at 4.44 MeV after excitation by 14.1 MeV neutrons from D+T fusion. These gamma rays can be measured by a new gamma-ray detector under development. Analysis of predicted signals is in progress, with results to date indicating that the method promises to be useful for diagnosing imploded capsules.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Activation of Air and Utilities in the National Ignition Facility

Detailed 3-D modeling of the NIF facility is developed to accurately simulate the radiation environment within the NIF. Neutrons streaming outside the NIF Target Chamber will activate the air present inside the Target Bay and the Ar gas inside the laser tubes. Smaller levels of activity are also generated in the Switchyard air and in the Ar portion of the SY laser beam path. The impact of neutron activation of utilities located inside the Target Bay is analyzed for variety of shot types. The impact of activating TB utilities on dose received by maintenance personnel post-shot is analyzed. The current NIF facility model includes all important features of the Target Chamber, shielding system, and building configuration. Flow of activated air from the Target Bay is controlled by the HVAC system. The amount of activated Target Bay air released through the stack is very small and does not pose significant hazard to personnel or the environment. Activation of Switchyard air is negligible. Activation of Target Bay utilities result in a manageable dose rate environment post high yield (20 MJ) shots. The levels of activation generated in air and utilities during D-D and THD shots are small and do not impact work planning post shots.

61 RADIATION PROTECTION AND DOSIMETRY↗