SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Neutron flux and gamma ray source edit computer program for design and analysis of radiation shields in nuclear rocket systems
The role of heating from nuclear radiation in design of the NERVA engine is treated. Some components are subjected to very high gamma heating rates in excess of 0.5 Btu/cubic inch/sec in steel in the primary nozzle or 0.25 Btu/cubic inch/sec in aluminum in the pressure vessel. These components must be cooled by a fraction of the liquid hydrogen propellant before it is passed through the core, heated, and expanded out the nozzle as a gas. Other components that are subjected to lower heating rates such as the thrust structure and the disk shield are designed so that they would not require liquid hydrogen cooling. Typical gamma and neutron heating rates, resulting temperatures, and their design consequences are discussed. Calculational techniques used in the nuclear and thermal analyses of the NERVA engine are briefly treated.
The performance of ideal and real staged primary propellant pumps and bleed-powered turbines was calculated for gas-core nuclear rocket engines over a range of operating pressures from 500 to 5000 atm. This study showed that for a required engine operating pressure of 1000 atm the pump work was about 0.8 hp/(lb/sec), the specific impulse penalty resulting from the turbine propellant bleed flow as about 10 percent; and the heat required to preheat the propellant was about 7.8 MW/(lb/sec). For a specific impulse above 2400 sec, there is an excess of energy available in the moderator due to the gamma and neutron heating that occurs there. Possible alternative pumping cycles are the Rankine or Brayton cycles.
Basic guidelines are presented for a nuclear space power system which utilizes heat pipes to transport thermal power from a fast nuclear reactor to an out of core thermionic converter array. Design parameters are discussed for the nuclear reactor, heat pipes, thermionic converters, shields (neutron and gamma), waste heat rejection systems, and the electrical bus bar-cable system required to transport the high current/low voltage power to the processing equipment. Dimensions are compatible with shuttle payload bay constraints.
Computer programs for solving neutron and gamma transport and gamma heating problems in three- dimensional geometries
Uranium 233 critical mass requirements, neutron kinetic behavior, and neutron and gamma ray heating rates for nuclear light bulb rocket engine
A neutron star in a close binary orbit around another neutron star (or stellar-mass black hole) spirals inward owing to gravitational radiation. We discuss the effects of tidal dissipation during this process. Tidal energy dissipated in the neutron star's core escapes mainly as neutrinos, but heating of the crust, and outward diffusion of photons, blows off the outer layers of the star. This photon-driven mass loss precedes the final coalescence. The presence of this eject material impedes the escape of gamma-rays created via neutrino interactions. If an e(+) - e(-) fireball, created in the late stages of coalescence, were loaded with (or surrounded by) material with the mean column density of the ejecta, it could not be an efficient source of gamma-rays. Models for cosmologically distant gamma-rays burst that involve neutron stars must therefore be anisotropic, so that the fireball expands preferentially in directions where the column density of previously blown-off material is far below the spherically averaged value which we have calculated. Some possible 'scenarios' along these lines are briefly discussed.
Ramaty et al. (1980) have proposed a model of a neutron-star corequake and subsequent shock heating of the atmosphere to account for the gamma-ray burst of March 5, 1979. This model is elaborated by examining the overall energetics and characteristics of the radiation-dominated gas shocks under the assumption of thermodynamic equilibrium, taking into account the electron-positron pair production behind the shock. Using values for the density typical of those expected for neutron-star crusts (100-10,000 g/cu cm) and shock velocities characteristic of the sound speed (40,000-100,000), shock luminosities are obtained comparable to those required if the burst originated in the LMC. In addition, the fraction of energy deposited in electron-positron pairs is in good agreement with observation. Uneven shock heating between the polar and equatorial regions of the neutron star due to the presence of a dipole magnetic field, coupled with a rotation rate of 8 s, can also naturally account for the pulsating phase of the burst.
Gamma ray spectra tabulation following neutron absorption and inelastic scattering events in H, Be, C, O, Al, Cr, Fe, Ni, Zr, W, W isotopes, U-235, and U-238
Solar coronal heating neutron theory based on solar gamma ray flux considerations
High temperature shock heating of relativistically expanding plasmas produced in neutron star binary mergers provides a model for cosmic gamma ray burst sources. This requires the fireball resulting from the merger to have a very high entropy per baryon, mechanisms for which are discussed. The energy, temporal structure and spectrum produced by the blast wave and reverse shock as the fireball is decelerated in an external medium are comparable to those observed, as is the frequency of occurrence and the characteristics of the spatial distribution of the events. Difficulties common to all cosmological gamma ray burst scenarios concern the total amount of energy ultimately appearing at gamma ray energies, the time scales, the spectrum, and the great variety of time profiles. A very general mechanism which overcomes these problems is presented. Situations where the pair plasma is created in regions which are relatively free of baryons are discussed. The effect of the interaction of the expanding fireball with the external medium is considered.
The neutron and gamma radiation from a MHW-RTG was used to evaluate the total response of a shielded 0.3-mm silicon detector. The generator employs a 2200 W(th) PuO2 heat source concept known as the HELIPAK. The total integrated neutron and gamma ray fluxes at 100 cm away from the source along the radial direction were 1.67 x 1,000 n/sq cm/s and 1.49 x 10,000 gamma sq cm/s, respectively. Experimental values of the response function of the shielded silicon detector were used to determine the total counting rates due to photons at bias energies ranging from 50 to 200 keV. For neutrons, analytically computed response functions were used to determine the total counting rates at the same bias energies. It was found that for an aluminum shield the neutrons are not significant, regardless of the thickness of the shield. However, the magnitude of the total counting rate due to neutrons increases with increased atomic number of the shield and becomes comparable to the counting rate due to photons for a platinum shield thickness of 5 cm.
Data are presented that indicate that heat-treated Czochralski-grown aluminum doped silicon that undergoes an appreciable resistivity increase during heating at approximately 450 C is significantly more resistant to both neutron and gamma irradiation than boron doped material (or aluminum doped material that either has not been heat treated or does not experience an appreciable resistivity change during such a treatment). Data interpretation is, however, quite difficult due to the occurrence of severe trapping effects in heat treated material.
Ramatry, et al. proposed a model to account for the 5 March 1979 gamma ray burst in terms of a neutron star corequake and subsequent shock heating of the neutron star atmosphere. This model is extended by examining the overall energetics and characteristics of these shocks, taking into account the e(+)-e(-) pair production behind the shock. The effects of a dipole magnetic field in the shock jump conditions are also examined and it is concluded that the uneven heating produced by such a field can account for the temperature difference between pole and equator implied by the pulsating phase of the burst. The overall energetics and distribution of energy between e(+)-(-) pairs and photons appears to be in agreement with observations if this event is at a distance of 55 kpc as implied by its association with the Large Magellanic Cloud.
Ramatry, et al. proposed a model to account for the 5 March 1979 gamma ray burst in terms of a neutron star corequake and subsequent shock heating of the neutron star atmosphere. This model is extended by examining the overall energetics and characteristics of these shocks, taking into account the e(+)-e(-) pair production behind the shock. The effects of a dipole magnetic field in the shock jump conditions are also examined and it is concluded that the uneven heating produced by such a field can account for the temperature difference between pole and equator implied by the pulsating phase of the burst. The overall energetics and distribution of energy between e(+)-e(-) pairs and photons appear to be in agreement with observations if this event is at a distance of 55 kpc as implied by its association with the Large Magellanic Cloud. Previously announced in STAR as N83-31568
A method for utilizing the decay heat of actinide wastes to power an electric thrust vehicle is proposed. The vehicle, launched by shuttle to earth orbit and to earth escape by a tug, obtains electrical power from the actinide waste heat by thermionic converters. The heavy gamma ray and neutron shielding which is necessary as a safety feature is removed in orbit and returned to earth for reuse. The problems associated with safety are dealt with in depth. A method for eliminating fission wastes via chemical propulsion is briefly discussed.
Reactor shielding, safety studies, and heat pipe development work are described. Monte Carlo calculations of gamma and neutron shield configurations show that substantial weight penalties are incurred if exposure at 25 m to neutrons and gammas must be limited to 10 to the 12th power nvt and 10 to the 6th power rad, instead of the 10 to the 13th power nvt and 10 to the 7th power rad values used earlier. For a 1.6 MW sub t reactor, the required shield weight increases from 400 to 815 kg. Water immersion critically calculations were extended to study the effect of water in fuel void spaces as well as in the core heat pipes. These show that the insertion into the core of eight blades of B4C with a mass totaling 2.5 kg will guarantee subcriticality. The design, fabrication procedure, and testing of a 4m long molybdenum/lithium heat pipe are described. It appears that an excess of oxygen in the wick prevented the attainment of expected performance capability.
Experimental data showing the effects of neutrons, gamma rays, and temperature on the electrical and switching characteristics of phase-control and inverter-type SCR's are presented. The special test fixture built for mounting, heating, and instrumenting the test devices is described. Four SCR's were neutron irradiated at 300 K and four at 365 K for fluences up to 3.2 x 10 exp 13 n/sq. cm, and eight were gamma irradiated at 300 K only for gamma doses up to 5.1 Mrads. The electrical measurements were made during irradiation and the switching measurements were made only before and after irradiation. Radiation induced crystal defects, resulting primarily from fast neutrons, caused the reduction of minority carrier lifetime through the generation of R-G centers. The reduction in lifetime caused increases in the on-state voltage drop and in the reverse and forward leakage currents, and decreases in the turn-off time.