Search NASA⌕ Search

SEARCH · Search NASA

Results for “NiMo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Trace levels of PtRu on NiMo foam electrodes towards hydrogen evolution reaction

Electrochemical water splitting plays a critical role in high purity hydrogen production. To lower capital cost and energy consumption, efficient catalysts are required to boost the hydrogen evolution reaction (HER), especially in alkaline media. Although PtRu alloy materials are still considered the state-of-the-art catalyst for the HER under alkaline media, large-scale application is hindered by its scarcity and high cost. NiMo alloy catalysts can be potential Pt-free alternatives to drive the sluggish kinetics of the HER under alkaline media, but their HER activity is still not ideal due to the limitation of Volmer step. Herein, we investigated the impact of trace levels of PtRu catalysts on NiMo electrodes towards the HER by incorporating advantages of both PtRu and NiMo catalysts to minimize cost and maintain a promising HER activity. Trace levels of PtRu catalysts from 0.0173 to 0.2648 mg cm −2 were loaded on commercial NiMo foam electrodes by a facile electrodeposition technique utilizing ppm concentration levels of PtRu in electrolyte. The results show that 0.0173 mg cm −2 PtRu loading on NiMo electrode can significantly enhance HER activity compared to the pristine NiMo foam electrode (Tafel slopes drop from ∼170 to ∼60 mV dec −1 ) due to the remarkable decline of energy barriers towards water dissociation and hydrogen adsorption. Meanwhile, the rate determining step (RDS) switches from the Volmer step to the Heyrovsky step when the PtRu loading increases to 0.0675 mg cm −2 . Promising catalytic stability is observed at 100 mA cm −2 over the course of 50 h with a PtRu loading of 0.1198 mg cm −2 . In conclusion, this work demonstrates a potential strategy to decrease the cost and simultaneously maintain superior HER performance by integrating trace levels of PtRu catalyst with NiMo foam electrodes.

Electrochemical water splitting↗
DOE OSTI2026

Sustainable Synthesis of NiMo Alloy Nanoparticles for Hydrogen Evolution Catalysis Using a Recyclable Ionic Liquid Solvent

Advancing the sustainability of nanoparticle electrocatalyst synthesis requires reducing solvent waste without compromising catalytic performance. Here, we report a rapid, microwave‐assisted colloidal synthesis of NiMo alloy nanoparticles in the ionic liquid 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIM‐NTf 2 ), which serves as both reaction medium and recyclable solvent. NiMo nanoparticles with tunable compositions were obtained within 1 min at 230 °C, with Ni 0.86 Mo 0.14 giving the highest activity toward the hydrogen evolution reaction (HER), achieving an onset potential of −129 mV, an overpotential at 10 mA cm −2 of −290 mV versus RHE in acidic electrolyte, and >99% Faradaic efficiency. The ionic liquid was recovered and purified via aqueous NH 4 OH extraction, removing over 99% of residual Mo species, and reused for up to five successive syntheses. Nanoparticles prepared in recycled BMIM‐NTf 2 retained comparable crystallinity, morphology, and catalytic activity, with stable HER performance over 45 h of electrolysis. These results demonstrate that ionic liquid recycling can improve the sustainability of the preparation of NiMo nanoparticle electrocatalysts while preserving performance and material integrity.

bimetallic alloy↗
DOE OSTI2026

Hydrotreatment of Nylon 66 and Amide Model Compounds Over Sulfided NiMo Catalysts

Molybdenum sulfide-based catalysts, such as nickel–molybdenum on alumina (NiMoS x /Al 2 O 3 ), are widely used in hydrotreating and have potential for catalyzing waste plastic conversion via hydrogenolysis, yet their performance, such as reaction kinetics and network, for amide-rich polymer feeds is poorly defined. Here we combine Nylon 66 with the amide model compound, N,N-dibutylhexanediamide (DBDAD), to quantify hydrodeoxygenation (HDO) and hydrodenitrogenation (HDN) chemistry in a stirred batch reactor (53 bar H 2 , 280–320°C). DBDAD conversion is near-linear with time, indicating strong adsorption of the substrates on the active sites. Time-resolved product identification indicates parallel C─O first-cleavagedeoxygenation (DO) and C─N first-cleavagedenitrogenation (DN) sequences proceeding through amine and diol intermediates, respectively, to C 4 ─C 6 alkanes. Increasing temperature shifts selectivity toward DN, decreasing the initial r(DO)/r(DN) from 1.38 (280°C) to 0.69 (320°C), with an apparent activation energy of 173 kJ mol −1 for DBDAD conversion. At 300°C, nylon 66 converts faster than DBDAD, producing a complex mixture of oxygen- and nitrogen-containing species and an initial rate ratio r(DO)/r(DN) of 1.6. No heteroaromatic nitrogen products are detected by the method used. These results provide reaction pathways and product signatures relevant to hydro-processing catalysts exposed to polyamide-derived streams.

Nylon 66↗
DOE OSTI2023

Using nickel-molybdenum cathode catalysts for efficient hydrogen gas production in microbial electrolysis cells

A low-cost cathode catalyst based on a NiMo alloy was examined here to replace noble metals for the hydrogen production in microbial electrolysis cells (MECs). Two NiMo catalysts were synthesized through either an electrochemical assisted (NiMo Elec) or a hydrothermal (NiMo Ht) approach. The NiMo Ht method enriched the electrocatalyst with Mo atoms compared to the NiMo Elec approach, producing a similar current density with a minimal overpotential of 50mV compared to Pt. Further, in MEC tests using the NiMo Ht catalyst, H 2 was generated at a highest rate of 81±3 L H2 /L-d (current density of 44.4 ± 0.9 A/m 2 ) at a cell voltage of -0.86 V, and a Coulombic efficiency of >97%. Modifying the closely stacked MEC design to include a reference electrode, and analysis of the electrode potentials using the electrode potential slope method, revealed a large contribution of the cathode resistance (5.3±0.5mΩm 2 ) compared to the anode (1.4±0.2mΩm 2 ) and ohmic resistance (0.83mΩm 2 ) for a total internal resistance of 7.6±0.5mΩm 2 . The high performance of the NiMo Ht catalyst coupled with its low cost provides an economically viable approach to advance the generation of biohydrogen in MECs.

25 ENERGY STORAGE↗
DOE OSTI2022

The effect of silica oxide support on the catalytic activity of nickel-molybdenum bimetallic catalyst toward ethanol steam reforming for hydrogen production

This work investigates the effects of molybdenum promoter and silica oxide (SiO 2 ) support morphology on the ethanol steam reforming (ESR) performance of Nickel-Molybdenum (NiMo) bimetallic catalysts. Ordered mesoporous SiO 2 (SBA-15) and commercial SiO 2 supports were used as the oxide support materials. The synthesized catalysts were prepared via the wet impregnation method and characterized via XRD, H 2 -TPR, BET, FTIR, and Raman techniques. This study shows that NiMo bimetallic catalyst supported on SBA-15 has superior catalytic activity and better coking resistance at an intermediate temperature of 600 ⁰C than commercial SiO 2 supported catalysts. The presence of a uniform mesoporous structure of SBA-15 with an average pore diameter of ~ 2 nm can obstruct the carbon formation, leading to improved coking resistance. The catalytic enhancement of NiMo bimetallic catalysts toward ESR can also be linked to the ability of Mo promoter in enhancing the interaction between NiMo nanoparticles and SiO 2 support materials and restraining agglomeration of Ni nanoparticles, which results in further improvement of NiMo nanoparticle dispersion and inhibit its sintering. The NiMo bimetallic catalysts supported on SBA-15 illustrated the high H 2 yield of ~ 54% and carbon conversion of ~ 89% with the excellent stability for ESR performed at 600 ⁰C and the steam-to-carbon ratio of 2 over 65 hours.

25 ENERGY STORAGE↗
DOE OSTI2021

3D Printed Nickel–Molybdenum-Based Electrocatalysts for Hydrogen Evolution at Low Overpotentials in a Flow-Through Configuration

Three-dimensional (3D) printed, hierarchically porous nickel molybdenum (NiMo) electrocatalysts were synthesized and evaluated in a flow-through configuration for the hydrogen evolution reaction (HER) in 1.0 M KOH(aq) in a simple electrochemical H-cell. 3D NiMo electrodes possess hierarchically porous structures because of the resol-based aerogel precursor, which generates superporous carbon aerogel as a catalyst support. Relative to a traditional planar electrode configuration, the flow-through configuration allowed efficient removal of the hydrogen bubbles from the catalyst surface, especially at high operating current densities, and significantly decreased the overpotentials required for HER. An analytical model that accounted for the electrokinetics of HER as well as the mass transport with or without the flow-through configuration was developed to quantitatively evaluate voltage losses associated with kinetic overpotentials and ohmic resistance due to bubble formation in the porous electrodes. Furthermore, the chemical composition, electrochemical surface area (ECSA), and roughness factor (RF) were also systematically studied to assess the electrocatalytic performance of the 3D printed, hierarchically porous NiMo electrodes. An ECSA of 25163 cm2 was obtained with the highly porous structures, and an average overpotential of 45 mV at 10 mA cm–2 was achieved over 24 h by using the flow-through configuration. The flow-through configuration evaluated in the simple H-cell achieved high electrochemical accessible surface areas for electrochemical reactions and provided useful information for adaption of the porous electrodes in flow cells.

08 HYDROGEN↗
DOE OSTI2022

Co-Hydrotreating of Catalytic Fast Pyrolysis Oils with Straight-Run Diesel

Catalytic Fast Pyrolysis (CFP) of biomass provides an opportunity for producing stabilized bio-oils (CFP oils) that can be further processed into hydrocarbon transportation fuels via hydroprocessing. Standalone hydrotreating of CFP oils has been pursued and has been shown to be able to produce hydrocarbon products with low oxygen contents of <1wt%, but the process is costly due to the high requirements of hydrogen and high capital costs. The costs can be reduced by co-processing in refineries, which takes advantage of the existing refinery infrastructure and the economies of the larger scale of petroleum processing operations. In this contribution, we evaluated co-hydrotreating of CFP oil with straight-run diesel in a laboratory continuous hydrotreating reactor. The CFP oil had been produced over a bi-functional metal-acid catalyst (Pt/TiO2) and contained 17 wt% oxygen on dry basis, and it was fed to the reactor together with straight-run diesel in the proportion of 20 vol%:80 vol%. The co-hydrotreated diesel products had acceptable cetane numbers (>40), and the calculated carbon efficiencies were high (~95%) for the CFP portion of the feed mixtures. Biogenic carbon incorporation in the product was confirmed by C-14 analysis. Sulfided NiMo catalyst gave better performance with respect to the diesel product quality than CoMo did due to the higher hydrogenation activity of NiMo. A comparison of standalone hydrotreating of the CFP oil and the straight-run diesel to co-hydrotreating showed good correspondence. Major challenges and risks associated with co-hydrotreating are discussed in this presentation.

biomass↗
DOE OSTI2026

From Powder to Power: Tailored Pre-Milling Strategy that Optimizes Microstructure for Efficient Hydrogen Evolution

The hydrogen evolution reaction (HER) plays a critical role in enabling large-scale electrolytic hydrogen production and advancing future technologies and fuel production. Among non-precious metals, NiMo-based catalysts are particularly attractive due to their capability to promote both water dissociation and hydrogen adsorption in alkaline media. However, conventional NiMo catalysts often suffer from incomplete alloying, particle aggregation, weak metal–support interactions, and surface oxidation, which significantly limit active site utilization, electronic conductivity, and long-term stability. Herein, we report a scalable, solid-state, two-step ball milling strategy for constructing an efficient NiMo/C catalyst for the HER. Pre-milling the metal precursors prior to carbon incorporation promotes efficient solid-state activation, leading to the formation of uniformly alloyed, ultrafine, and defect-rich Ni–Mo nanoparticles with robust metal–carbon interfacial anchoring. Benefiting from this integrated structural design, the optimized NiMo/C catalyst exhibits low overpotentials and Tafel slopes, reduced charge-transfer resistance, and excellent durability under alkaline conditions. Comprehensive structural and surface analysis reveal that the enhanced HER performance can be attributed to the synergistic interplay of homogeneous Ni–Mo alloying, uniform nanoparticle dispersion on a defect-rich carbon scaffold, enhanced accessibility of catalytically active sites, and optimized electronic coupling that stabilizes the catalyst surface. This work highlights the two-step solid-state ball milling strategy as a simple, robust, and scalable route for the preparation of effective and durable non-precious metal HER electrocatalysts, offering practical insights toward large-scale and inexpensive hydrogen production.

Yang, Xiaoxuan [Oak Ridge National Laboratory (ORN↗
DOE OSTI2025

Palm oil deoxygenation with glycerol as a hydrogen donor for renewable fuel production using nickel-molybdenum catalysts: The effect of support

Palm oil, one of the most widely used vegetable oils, offers significant potential as a sustainable feedstock for biofuel production. This study explores the deoxygenation of palm oil using glycerol as a hydrogen donor, with nickel-molybdenum (NiMo) catalysts supported on commercial alumina (Al 2 O 3 ), and zeolite (HZSM-5) comparing with self-prepared zirconia (ZrO 2 ). The catalysts were synthesized via incipient wetness impregnation and evaluated for their performance in biofuel production. NiMo/Al 2 O 3 exhibited the lowest oxygen removal efficiency (68.5 %), while NiMo/HZSM-5 achieved a higher oxygen removal (74.3 %) but also demonstrated the highest coke formation. The type of support material influenced the resulting biofuel range, with NiMo/HZSM-5 and NiMo/ZrO 2 favoring jet fuel production, whereas NiMo/Al 2 O 3 was more suitable for diesel production. Notably, NiMo/ZrO 2 exhibited the highest performance in palm oil deoxygenation while minimizing coke formation. These findings highlight NiMo/ZrO 2 as a promising catalyst for efficient and stable biofuel production, with the support material significantly influencing product yield and fuel quality.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Coprocessing Biomass Fast Pyrolysis and Catalytic Fast Pyrolysis Oils with Vacuum Gas Oil in Refinery Hydroprocessing

Fast pyrolysis and catalytic fast pyrolysis (CFP) have been considered to be promising approaches for converting lignocellulosic biomass into liquid bio-oils followed by upgrading to produce fuel-range hydrocarbon products. Co-processing fast pyrolysis and CFP bio-oils with petroleum feedstocks leverages the existing petroleum refining infrastructure, which reduces Capex for the overall conversion technologies for biomass to fuel and enables fast adoption of the technologies and biofuels. Here, we reported the co-processing of different woody fast pyrolysis and CFP bio-oils with petroleum vacuum gas oil (VGO) at 5-25% bio-oil blending levels over a NiMo sulfide catalyst for mild hydrocracking. The catalyst activities over ~300 hours time on stream, the product yield and properties, and the biogenic carbon content in products are provided. Co-processing of the raw fast pyrolysis bio-oil in our configuration was not successful because the instability of the bio-oil resulted in reactor plugging and bio-oil stabilization by hydrogenation enabled their stable co-processing with VGO, whereas the CFP bio-oil can be co-processed without pretreatment. Simultaneous hydrodesulfurization, hydrodeoxygenation, and hydrocracking reactions occurred during co-processing and no obvious decrease in hydrodesulfurization and hydrocracking conversion of VGO was observed, suggesting the minimal impact of co-processed bio-oils on the reaction of VGO and also the simultaneous conversion of bio-oil and VGO to produce fuel products with much-reduced S and O content. Biogenic carbon content in co-processed products calculated by yield mass balance, together with results from isotopic measurements, indicates high biogenic carbon incorporation into liquid hydrocarbon products. In conclusion, higher biogenic carbon incorporation into fuel products was observed when co-processing CFP bio-oils than the fast pyrolysis bio-oils and over 90% of carbon in CFP bio-oil was incorporated into liquid hydrocarbon products.

09 BIOMASS FUELS↗
DOE OSTI2024

Co-hydrotreatment of Bio-oil and Waste Cooking Oil to Produce Transportation Fuels

This paper reports the co-hydrotreatment of the heavy bio-oil fraction with waste cooking oil (WCO) using NiMo/γ-Al 2 O 3 catalyst, followed by the distillation of resulting deoxygenated oil and the characterization of resulting fuel cuts. The heavy BTG bio-oil fraction was obtained by removing the very reactive light-oxygenated compounds via rotary evaporation, subsequently mixed with 1-butanol. The resulting oil was blended with WCO and subjected to a two-step co-hydrotreatment process. The first step, called “stabilization,” is aimed at saturating highly reactive hydrogen-deficient compounds. The second step, called “deoxygenation,” aimed to remove bio-oil oxygen, primarily as H 2 O. This study examined the impact of varying bio-oil concentrations (0, 10, 20, 30, 40 wt.% of WCO) on the upgraded oil's yield, composition, and fuel properties. The resulting hydrotreated oil was distilled into gasoline-range, kerosene-range, and diesel-range hydrocarbons at <150 °C, 150 to 250 °C, and 250 to 350 °C, respectively. The yield of the hydrotreated oil indicates that as the bio-oil concentration increases, the amounts of coke (0.7 to 2.4 %) and water (2 to 10 wt. %) increase while the organic layer yields decrease (80 to 63 %). The coke yield was comparable to the coke yield obtained when co-processing the pyrolytic lignin fraction. This suggests that coke is formed from both the sugar oligomers and the lignin-derived oligomers. The UV-fluorescence analysis on the hydrotreated oil shows that more polycondensed and conjugated ring compounds formed as the bio-oil concentration is increased. These compounds are precursors of coke. FTIR results showed that most raw materials were converted to biofuels after the hydrotreatment. To achieve less than 1 wt. % of coke yield, blends with up to 20 wt. % pyrolysis oil should be used. An increase in bio-oil concentration leads to a slight increase in gasoline yield and a decrease in kerosene and diesel yields. The identified carbon species found in the fuel cuts include n-paraffin, iso-paraffin, cycloparaffin, and aromatics. Further, the jet fuel cut (kerosene) was characterized by density, surface tension, and viscosity. Our product conforms to the standard specifications for sustainable aviation fuels (Jet A-1). Further research is suggested to fine-tune the operating parameters for achieving reduced coke yield and enhanced kerosene yield.

09 BIOMASS FUELS↗
DOE OSTI2024

Co-Hydrotreatment of Pyrolytic Lignin and Waste Cooking Oil to Produce Hydrocarbons

The co-hydrotreatment of pyrolysis bio-oils and vegetable oils could facilitate the integration of bioderived fuels into existing fuel infrastructures without significant modifications. Co-hydrotreatment studies with different PL/WCO blend ratios (0, 10, 20, 30, and 40 wt %) were conducted over the NiMo/γ-Al 2 O 3 catalyst. The coke formation value for WCO was 0.7 wt % and ranged between 1.5 and 2.5 wt % with the increase of pyrolytic lignin in the blend. The data suggest that coke is formed from both the sugar- and lignin-derived oligomers since the coke yield reported in this study is comparable with the coke yield obtained by coprocessing the bio-oil fraction without light oxygenate compounds, based on previous studies. All blends are recommended for co-hydrotreatment based on coke yield. The resulting organic phase was distilled into hydrocarbons at <150 °C, 150 to 250 °C, and 250 to 350 °C. The organic product’s overall hydrocarbon distribution was strongly dependent on the pyrolytic lignin concentration. The yield of the distillation cut with a boiling point range between 250 and 350 °C was higher in the hydrotreated samples, with more than 20% during distillation. Two-dimensional GC×GC was used to determine carbon distribution on the combustibles. FTIR and UV fluorescence spectra showed that most feedstocks were converted to potential combustibles for transportation applications after hydrotreatment. The distillation cuts properties, such as density, viscosity, and surface tension, were reported and compared to transportation fuel properties. Hydrocarbon yields reveal the potential of cohydrotreatment to upgrade pyrolytic lignin into valuable products. Furthermore, these findings provide useful insights into utilizing pyrolytic lignin to produce promising combustibles suitable for transportation applications.

co-hydrotreatment↗
DOE OSTI2025

Conversion of Compositionally Diverse Plastic Waste over Earth-Abundant Sulfides

Chemical deconstruction of polyolefin plastic wastes via hydroconversion is promising for mitigating plastic accumulation in landfills and the environment. However, hydroconversion catalysts cannot handle complex feedstocks containing multiple polymers, additives, and heteroatom impurities. Here, we report a single-step strategy using earth-abundant metal sulfide catalysts to deconstruct these wastes. We show that NiMoS x /HY catalysts deconstruct polyolefin feedstocks, achieving ~81–94% selectivity to liquid products. Postsynthetic zeolite modification enhances the catalyst’s activity by >2.5 times, achieving over 95% selectivity to liquid fuels with controllable product distribution in the naphtha, jet fuel, and diesel range. The catalyst is resilient to increasingly complex feedstocks, such as additive-containing polymers and mixed plastics composed of polyolefins and heteroatom-containing polymers, including poly(vinyl chloride). As a result, we extend the strategy to single-use polyolefin wastes that can generate toxic byproducts, such as HCl and NH 3 , and eliminate their emissions by integrating reaction and sorption in a one-step process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enabling Efficient Water Splitting with Advanced Materials Designed for High pH Membrane Interface

This research focuses on durable, high-performance materials and interfaces for advanced water splitting, enabling a clear pathway for achieving <$2/KgH2 (on scale) via anion exchange membrane (AEM)-based electrolysis. We aim to advance this goal via an improved fundamental understanding of both hydrogen and oxygen evolution reactions (HER/OER) leading to platinum group metal (PGM)-free catalyst materials. Here, we use NiFeCo and NiMo as OER and HER catalysts, respectively, in a full alkaline electrolysis cell. A thermally stable, multi-cation AEM is used to operate the cell at elevated temperatures thereby lowering the operating potential by increasing the kinetics of the respective catalytic reactions. The transition metal catalysts, paired with this novel AEM, have been used to achieve an operating potential of 1.79 V at 1 A/cm2. This potential is 300 mV lower than similar electrolysis cells equipped with PGM-based catalysts. We have also demonstrated the efficacy of the less caustic potassium carbonate solution as a replacement for potassium hydroxide as an electrolyte. By using a carbonate-based electrolyte, the hydroxide ion required for the anodic reaction is continuously replenished by re-establishing an equilibrium with water. This consideration, coupled with the reduced alkalinity of the carbonate solution, yields an electrolysis cell capable of sustained operation with minimal increase in operating potential.

Kendrick, Ian↗
NASA NTRS1986

Undercooled and rapidly quenched Ni-Mo alloys

Hypoeutectic, eutectic, and hypereutectic nickel-molybdenum alloys were rapidly solidified by both bulk undercooling and melt spinning techniques. Alloys were undercooled in both electromagnetic levitation and differential thermal analysis equipment. The rate of recalescence depended upon the degree of initial undercooling and the nature (faceted or nonfaceted) of the primary nucleating phase. Alloy melts were observed to undercool more in the presence of primary Beta (NiMo intermetallic) phase than in gamma (fcc solid solution) phase. Melt spinning resulted in an extension of molybdenum solid solubility in gamma nickel, from 28 to 37.5 at % Mo. Although the microstructures observed by undercooling and melt spinning were similar the microsegregation pattern across the gamma dendries was different. The range of microstructures evolved was analyzed in terms of the nature of the primary phase to nucleate, its subsequent dendritic growth, coarsening and fragmentation, and final solidification of interfenderitic liquid.

Tewari, S. N.↗
NASA NTRS1987

Effect of undercooling on the microstructure of Ni-35 at. pct Mo (eutectic) and Ni-38 at. pct Mo (hypereutectic) alloys

Ni-35 at. pct Mo and Ni-38 at. pct Mo alloy specimens have been solidified from various levels of undercooling in the differential thermal analysis and the electromagnetic levitation units in a pyrex/vycor bed. The evolution of the microstructure in the solified specimens has been examined in terms of the degree of undercooling, the nature of the first phase to nucleate from the melt, and the specimen cooling rate. The melt has been observed to undercool more in the presence of intermetallic NiMo (beta) phase as compared to that in the presence of nickel-rich solid solution (gamma). The 'anomalous eutectic' type of microstructure has been shown to result from the initial formation of the dendritic skeleton of either of the two phases, its segmentation due to convection and ripening, and the subsequent nucleation of the other phase in the interdendritic liquid regions. The recalescence behavior has been examined as a function of undercooling and the nature of the phase nucleating first in the melt.

Tewari, S. N.↗
NASA NTRS1987

Characterization of ion beam modified ceramic wear surfaces using Auger electron spectroscopy

An investigation of the surface chemistry and morphology of the wear surfaces of ceramic material surfaces modified by ion beam mixing has been conducted using Auger electron spectroscopy and secondary electron microscopy. Studies have been conducted on ceramic/ceramic friction and wear couples made up of TiC and NiMo-bonded TiC cermet pins run against Si3N4 and partially stabilized zirconia disc surfaces modified by the ion beam mixing of titanium and nickel, as well as ummodified ceramic/ceramic couples in order to determine the types of surface changes leading to the improved friction and wear behavior of the surface modified ceramics in simulated diesel environments. The results of the surface analyses indicate that the formation of a lubricating oxide layer of titanium and nickel, is responsible for the improvement in ceramic friction and wear behavior. The beneficial effect of this oxide layer depends on several factors, including the adherence of the surface modified layer or subsequently formed oxide layer to the disc substrate, the substrate materials, the conditions of ion beam mixing, and the environmental conditions.

Wei, W.↗