SEARCH · Search NASA
Results for “NiTe”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Pressure-driven Lifshitz transition in type-II Dirac semimetal NiTe[subscript 2]
Abstract not provided
Magnetic properties of Fe{sub 2}P-type Tb{sub 6}FeTe{sub 2}, Tb{sub 6}CoTe{sub 2}, Tb{sub 6}NiTe{sub 2} and Er{sub 6}FeTe{sub 2} compounds
The magnetic ordering of the Fe{sub 2}P-type Tb{sub 6}FeTe{sub 2}, Tb{sub 6}CoTe{sub 2} Tb{sub 6}NiTe{sub 2} and Er{sub 6}FeTe{sub 2} phases (space group P6-bar 2m) has been investigated through magnetization measurement and neutron powder diffraction. Tb{sub 6}FeTe{sub 2}, Tb{sub 6}CoTe{sub 2} and Tb{sub 6}NiTe{sub 2} demonstrate high-temperature ferromagnetic and low-temperature spin reorientation transitions, whereas Er{sub 6}FeTe{sub 2} shows antiferromagnetic transition, only. The Tb{sub 6}FeTe{sub 2} and Tb{sub 6}NiTe{sub 2} phases show same high-temperature collinear ferromagnetic structure, whereas Tb{sub 6}FeTe{sub 2} is the commensurate non-collinear ferromagnet and Tb{sub 6}NiTe{sub 2} is the canted ferromagnetic cone with K{sub 1}=[0, 0, {+-}3/10] and K{sub 2}=[{+-}2/9, {+-}2/9, 0] wave vectors at 2 K. The magnetic structure of Er{sub 6}FeTe{sub 2} is a flat spiral with K{sub 1}=[0, 0, {+-}1/10] at 2 K. The magnetic entropy change for Tb{sub 6}NiTe{sub 2} is {Delta}S{sub m}=-4.86 J/kg K at 229 K for the field change {Delta}{mu}{sub 0}H=0-5 T. In addition, novel Fe{sub 2}P-type Gd{sub 6}FeTe{sub 2}, Zr{sub 6}FeTe{sub 2}, Hf{sub 6}FeTe{sub 2}, Dy{sub 6}NiTe{sub 2}, Zr{sub 6}NiTe{sub 2} and Hf{sub 6}NiTe{sub 2} phases have been obtained. -- Graphical abstract: The novel Fe{sub 2}P-type Tb{sub 6{l_brace}}Fe, Co, Te{r_brace}Te{sub 2} and Er{sub 6}FeTe{sub 2} phases (space group P6-bar 2m) show the complex magnetic ordering below 18-228 K. The magnetocaloric effect for Tb{sub 6}NiTe{sub 2} in terms of the isothermal entropy change, -{Delta}S{sub m}, has the maximum value of 4.86 J/kg K at 229 K for the 0-5 T field change.
Dimensional crossover and band topology evolution in ultrathin semimetallic NiTe 2 films
Nickel ditelluride (NiTe 2 ), a recently discovered Type-II Dirac semimetal with topological Dirac fermions near the Fermi energy, is expected to exhibit strong thickness-mediated electronic tunability and intrinsic two-gap superconductivity in the single-layer limit. Realizing such intriguing phenomena requires the fabrication of ultrathin NiTe 2 films and an understanding of the underlying physics that is still under debate. By conducting experimental band mappings of ultrathin films prepared with molecular beam epitaxy, we reveal spectroscopic evidence for the dimensionality crossover of single-crystalline ultrathin NiTe 2 films as a function of film thickness. As the film thickness increases from one to five layers, the gap in the conical topological surface states closes. Comparisons of experimental to first-principles results also highlight difficulties in fabricating atomically smooth single-layer NiTe 2 films. Our results not only provide further impetus for studying emergent phenomena in NiTe 2 but also underscore the limitations of fabricating NiTe 2 films for device applications.
Cetyltrimethylammonium bromide assisted self-assembly of NiTe{sub 2} nanoflakes: Nanoflake arrays and their photoluminescence properties
NiTe{sub 2} nanoflakes and their self-assembled nanoflake arrays (one-dimensional nanostructures) have been prepared by a single-step hydrothermal method using Ni(CH{sub 3}COO){sub 2}.4H{sub 2}O, Na{sub 2}TeO{sub 3}, glucose, and cetyltrimethylammonium bromide (CTAB). CTAB was found to strongly influence the structure and morphology of the resultant NiTe{sub 2}. Morphological transformations from nanoflakes to self-assembled nanoflake arrays and then to solid smooth nanowires were observed as CTAB concentration was increased in the growth solution. Photoluminescence of the NiTe{sub 2} self-assembled nanoflake arrays was investigated for the first time and the formation mechanism of the NiTe{sub 2} nanostructures is also discussed. - Graphical abstract: NiTe{sub 2} nanoflakes and their self-assembled nanoflake arrays have been prepared by a single-step hydrothermal method using Ni(CH{sub 3}COO){sub 2}.4H{sub 2}O, Na{sub 2}TeO{sub 3}, glucose, and cetyltrimethylammonium bromide (CTAB).
Neutron Irradiation Effects on Thermal and Mechanical Properties of NITE-SiC
Among the myriad of methods to produce SiC, only a few result in a stoichiometric and crystalline SiC that exhibits stability after radiation damage at temperatures beyond 200 deg. C. High purity SiC processed via chemical vapor deposition (CVD) is the best example of such a material. Another processing method, named nano-infiltration transient eutectic-forming (NITE) SiC, also yields a radiation stable material. It is a fabrication strategy that takes advantage of liquid-phase sintering to yield dense SiC. Specifically, SiC nanopowder feedstock mixed thoroughly with oxide additives are sintered at high-temperature (T<1850 deg. C). This maximum temperature is too low to result in significant creep or grain growth in SiC-based materials, and therefore allows for encapsulation of SiC fibers or SiC coated fuel particles in the NITE SiC matrix. Neutron irradiation effects in NITE-SiC-based materials (composites, monolithic materials, and some with surrogate fuel particles) have been studied to a limited extent. The goal of this study was to examine neutron irradiation effects at two different doses on five different NITE-SiC variants at two different temperatures. Volumetric swelling, degradation of thermal conductivity, and evolution in mechanical properties are reported accordingly.
Fermi-crossing Type-II Dirac fermions and topological surface states in NiTe 2
Transition-metal dichalcogenides (TMDs) offer an ideal platform to experimentally realize Dirac fermions. However, typically these exotic quasiparticles are located far away from the Fermi level, limiting the contribution of Dirac-like carriers to the transport properties. Here we show that NiTe 2 hosts both bulk Type-II Dirac points and topological surface states. The underlying mechanism is shared with other TMDs and based on the generic topological character of the Te p-orbital manifold. However, unique to NiTe 2 , a significant contribution of Ni d orbital states shifts the energy of the Type-II Dirac point close to the Fermi level. In addition, one of the topological surface states intersects the Fermi energy and exhibits a remarkably large spin splitting of 120 meV. Our results establish NiTe 2 as an exciting candidate for next-generation spintronics devices.
Unconventional critical behavior in the quasi-one-dimensional S=1 chain NiTe 2 O 5
In this work, we report a new quasi-one-dimensional S = 1 chain compound NiTe 2 O 5 . From the comprehensive study of the structure and magnetic properties on high quality single crystalline NiTe 2 O 5 , it’s revealed that NiTe 2 O 5 undergoes a transition into an intriguing long-range antiferromagnetic order at T N = 30.5 K, in which longitudinal magnetic moments along the chain direction are ferromagnetically ordered, while their transverse components have an alternating ferromagnetic-antiferromagnetic coupling. Even though the temperature dependence of magnetic susceptibility represents an archetypal anisotropic antiferromagnetic order, we found that critical behavior of unconventional nature with α'~0.25 and β~0.18 is accompanied by the temperature evolution of the antiferromagnetic order parameter.
Bulk Fermi surfaces of the Dirac type-II semimetallic candidate NiTe 2
Here, we present a study on the Fermi surface of the Dirac type-II semimetallic candidate NiTe 2 via the temperature and angular dependence of the de Haas–van Alphen (dHvA) effect measured in single crystals grown through Te flux. In contrast to its isostructural compounds like PtSe 2 , band-structure calculations predict NiTe 2 to display a tilted Dirac node very close to its Fermi level that is located along the Γ to A high-symmetry direction within its first Brillouin zone. The angular dependence of the dHvA frequencies is found to be in agreement with the first-principles calculations when the electronic bands are slightly shifted with respect to the Fermi level (ε F ), and therefore provide support for the existence of a Dirac type-II node in NiTe 2 . Nevertheless, we observed mild disagreements between experimental observations and density functional theory (DFT) calculations as, for example, nearly isotropic and light experimental effective masses. This indicates that the dispersion of the bands is not well captured by DFT. Despite the coexistence of Dirac-like fermions with topologically trivial carriers, samples of the highest quality display an anomalous and large either linear or sublinear magnetoresistivity. Finally, this suggests that Lorentz invariance breaking Dirac-like quasiparticles dominate the carrier transport in this compound.
Materials Data on NiTe by Materials Project
NiTe is lead oxide-like structured and crystallizes in the trigonal R-3m space group. The structure is two-dimensional and consists of three NiTe sheets oriented in the (0, 0, 1) direction. Ni2+ is bonded to four equivalent Te2- atoms to form a mixture of edge and corner-sharing NiTe4 tetrahedra. There are three shorter (2.50 Å) and one longer (2.54 Å) Ni–Te bond lengths. Te2- is bonded in a 4-coordinate geometry to four equivalent Ni2+ atoms.
Materials Data on Ta(NiTe)2 by Materials Project
Ta(NiTe)2 crystallizes in the orthorhombic Pnma space group. The structure is two-dimensional and consists of two Ta(NiTe)2 sheets oriented in the (0, 0, 1) direction. Ta is bonded in a 11-coordinate geometry to eight Ni and three Te atoms. There are a spread of Ta–Ni bond distances ranging from 2.71–2.76 Å. There are two shorter (2.90 Å) and one longer (2.95 Å) Ta–Te bond lengths. There are two inequivalent Ni sites. In the first Ni site, Ni is bonded in a 9-coordinate geometry to four equivalent Ta, two equivalent Ni, and three Te atoms. There are one shorter (2.41 Å) and one longer (2.53 Å) Ni–Ni bond lengths. There are one shorter (2.53 Å) and two longer (2.57 Å) Ni–Te bond lengths. In the second Ni site, Ni is bonded in a 9-coordinate geometry to four equivalent Ta, two equivalent Ni, and three Te atoms. There are one shorter (2.54 Å) and two longer (2.57 Å) Ni–Te bond lengths. There are two inequivalent Te sites. In the first Te site, Te is bonded in a 4-coordinate geometry to two equivalent Ta and two Ni atoms. In the second Te site, Te is bonded in a 5-coordinate geometry to one Ta and four Ni atoms.
Development of the tailored SiC/SiC composites by the combined fabrication process of ICVI and NITE methods
In order to improve the thermo-mechanical performances of SiC/SiC composite, process improvement and modification by the combination of nano-infiltration and transient eutectic-phase (NITE) method and chemical vapor infiltration (CVI) method were studied. Multilayered PyC/SiC fiber coating and matrix infiltration within fiber-tows were prepared with isothermal/isobaric CVI (ICVI) method and full-densification of SiC matrix was examined with NITE methods using four kinds of processing options. Applied pressure was useful for nearly-full matrix densification due to the promoting infiltration driving force of SiC nano-powder intra-fiber-tows, but simultaneously caused the sever degradation of fibers and interphase with fracture, resulting in lower strength. Increase of additives amount and additional polymer were effective ways for matrix densification by SiC nano-power infiltration intra-fiber bundles without pressure. Thermal conductivity was greatly improved with the decrease of matrix porosity. The tailoring of thermo-mechanical properties might be easily controlled by the SiC matrix porosity without processinduced fibers and interphases degradations.
Optimized NiTe 2 /Ni back contacts via chemical deposition for high performance CdTe solar cells
The development of efficient and stable back contacts remains a major challenge in achieving high performance and long-term stability of CdTe thin-film solar cells. Here, this work revisits the formation of NiTe 2 by chemical bath deposition (CBD) as a back contact for CdTe devices. An optimized CBD recipe, based on high-purity precursors and the addition of copper chloride directly into the bath, was developed and applied to fabricate Cu-doped CdTe solar cells. A modified Cu-free methodology was also applied to Group V doped absorbers. The process included pinhole filling, ion milling, CBD, annealing, and sputtering to form a low-barrier back contact. Devices fabricated using this method achieved consistent open-circuit voltages (V oc ) above 800 mV and fill factors (FF) exceeding 70%. The best Cu-doped devices reached power conversion efficiencies (PCE) above 18 %, and preliminary results with Group V-doped material demonstrated compatibility of the method with high-efficiency, state-of-the-art CdTe devices. This study shows that NiTe 2 /Ni back contacts, formed via an optimized chemical process followed by sputtering of Ni, represent a promising pathway for achieving low-barrier and potentially stable back contacts in modern CdTe photovoltaics.
Materials Data on Lu7(NiTe)2 by Materials Project
Lu7(NiTe)2 crystallizes in the orthorhombic Imm2 space group. The structure is three-dimensional. there are four inequivalent Lu sites. In the first Lu site, Lu is bonded in a 4-coordinate geometry to three equivalent Ni and one Te atom. There are two shorter (2.74 Å) and one longer (3.12 Å) Lu–Ni bond lengths. The Lu–Te bond length is 3.13 Å. In the second Lu site, Lu is bonded in a 3-coordinate geometry to three Te atoms. There are two shorter (3.15 Å) and one longer (3.19 Å) Lu–Te bond lengths. In the third Lu site, Lu is bonded in a 5-coordinate geometry to two equivalent Ni and three Te atoms. Both Lu–Ni bond lengths are 2.73 Å. There are one shorter (3.07 Å) and two longer (3.14 Å) Lu–Te bond lengths. In the fourth Lu site, Lu is bonded in a distorted rectangular see-saw-like geometry to two equivalent Ni and two equivalent Te atoms. Both Lu–Ni bond lengths are 2.76 Å. Both Lu–Te bond lengths are 3.11 Å. Ni is bonded in a 7-coordinate geometry to seven Lu atoms. There are two inequivalent Te sites. In the first Te site, Te is bonded in a 7-coordinate geometry to seven Lu atoms. In the second Te site, Te is bonded in a 8-coordinate geometry to eight Lu atoms.
Materials Data on NiTe by Materials Project
NiTe is Tungsten Carbide-like structured and crystallizes in the hexagonal P6_3/mmc space group. The structure is three-dimensional. Ni2+ is bonded to six equivalent Te2- atoms to form a mixture of face, edge, and corner-sharing NiTe6 octahedra. The corner-sharing octahedral tilt angles are 52°. All Ni–Te bond lengths are 2.67 Å. Te2- is bonded in a 6-coordinate geometry to six equivalent Ni2+ atoms.
Materials Data on Sc5(NiTe)2 by Materials Project
Sc5(NiTe)2 crystallizes in the orthorhombic Pnma space group. The structure is three-dimensional. there are five inequivalent Sc sites. In the first Sc site, Sc is bonded in a 6-coordinate geometry to three Ni and three equivalent Te atoms. There are two shorter (2.60 Å) and one longer (2.65 Å) Sc–Ni bond lengths. There are one shorter (2.99 Å) and two longer (3.08 Å) Sc–Te bond lengths. In the second Sc site, Sc is bonded in a 7-coordinate geometry to six Ni and one Te atom. There are a spread of Sc–Ni bond distances ranging from 2.63–2.86 Å. The Sc–Te bond length is 3.18 Å. In the third Sc site, Sc is bonded in a 5-coordinate geometry to one Ni and four Te atoms. The Sc–Ni bond length is 2.66 Å. There are two shorter (2.93 Å) and two longer (3.00 Å) Sc–Te bond lengths. In the fourth Sc site, Sc is bonded in a 5-coordinate geometry to one Ni and four Te atoms. The Sc–Ni bond length is 2.69 Å. There are a spread of Sc–Te bond distances ranging from 2.99–3.16 Å. In the fifth Sc site, Sc is bonded in a 6-coordinate geometry to three Ni and three Te atoms. There are two shorter (2.62 Å) and one longer (2.85 Å) Sc–Ni bond lengths. There are one shorter (3.01 Å) and two longer (3.03 Å) Sc–Te bond lengths. There are two inequivalent Ni sites. In the first Ni site, Ni is bonded in a 5-coordinate geometry to seven Sc and two equivalent Ni atoms. Both Ni–Ni bond lengths are 2.66 Å. In the second Ni site, Ni is bonded in a 9-coordinate geometry to seven Sc and two equivalent Ni atoms. There are two inequivalent Te sites. In the first Te site, Te is bonded to seven Sc atoms to form distorted edge-sharing TeSc7 pentagonal bipyramids. In the second Te site, Te is bonded in a 8-coordinate geometry to eight Sc atoms.
Materials Data on Er7(NiTe)2 by Materials Project
Er7(NiTe)2 crystallizes in the orthorhombic Imm2 space group. The structure is three-dimensional. there are four inequivalent Er sites. In the first Er site, Er is bonded in a 3-coordinate geometry to three Te atoms. There are two shorter (3.17 Å) and one longer (3.21 Å) Er–Te bond lengths. In the second Er site, Er is bonded in a 4-coordinate geometry to three equivalent Ni and one Te atom. There are two shorter (2.77 Å) and one longer (3.16 Å) Er–Ni bond lengths. The Er–Te bond length is 3.17 Å. In the third Er site, Er is bonded in a distorted square co-planar geometry to two equivalent Ni and two equivalent Te atoms. Both Er–Ni bond lengths are 2.81 Å. Both Er–Te bond lengths are 3.14 Å. In the fourth Er site, Er is bonded in a 5-coordinate geometry to two equivalent Ni and three Te atoms. Both Er–Ni bond lengths are 2.77 Å. There are one shorter (3.11 Å) and two longer (3.17 Å) Er–Te bond lengths. Ni is bonded in a 7-coordinate geometry to seven Er atoms. There are two inequivalent Te sites. In the first Te site, Te is bonded in a 8-coordinate geometry to eight Er atoms. In the second Te site, Te is bonded in a 7-coordinate geometry to seven Er atoms.
Materials Data on Y5(NiTe)2 by Materials Project
Y5(NiTe)2 crystallizes in the orthorhombic Cmcm space group. The structure is three-dimensional. there are three inequivalent Y sites. In the first Y site, Y is bonded in a 7-coordinate geometry to three Ni and four equivalent Te atoms. There are two shorter (2.86 Å) and one longer (2.91 Å) Y–Ni bond lengths. There are two shorter (3.34 Å) and two longer (3.37 Å) Y–Te bond lengths. In the second Y site, Y is bonded in a 6-coordinate geometry to three Ni and three equivalent Te atoms. There are two shorter (2.85 Å) and one longer (2.97 Å) Y–Ni bond lengths. There are one shorter (3.15 Å) and two longer (3.24 Å) Y–Te bond lengths. In the third Y site, Y is bonded in a square co-planar geometry to two Ni and two equivalent Te atoms. There are one shorter (2.91 Å) and one longer (3.17 Å) Y–Ni bond lengths. Both Y–Te bond lengths are 3.17 Å. There are two inequivalent Ni sites. In the first Ni site, Ni is bonded in a 9-coordinate geometry to seven Y and two equivalent Ni atoms. Both Ni–Ni bond lengths are 2.50 Å. In the second Ni site, Ni is bonded in a 9-coordinate geometry to seven Y and two equivalent Ni atoms. Te is bonded in a 8-coordinate geometry to eight Y atoms.