Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nitrogen Flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Examination of nonequilibrium effects in an ionized nitrogen flow

A thermo-chemical nonequilibrium ionized nitrogen flow in a shock tube is examined. A one-dimensional computational fluid dynamics code has been developed to study the flowfield incorporating a novel treatment of the electron energy equation. In the present approach, the electron pressure is included in the electron energy flux. In contrast, previous work has removed this term from the flux to facilitate the flux splitting. The code uses a five-species gas model for ionized nitrogen characterized by translational-rotational, vibrational, and electron-electronic temperatures. The results give good agreement with experimental data except for an inadequacy in the electronic source terms. A small difference is observed between the new and old splittings which increases with higher levels of ionization.

Hatfield, John A.↗

Resonant Doppler velocimetry in supersonic nitrogen flow

The development of the Resonant Doppler Velocimeter (RDV) is discussed. It is a new nonintrusive laser technique for flow diagnosis. The RDV technique is applied to supersonic nitrogen flow with sodium atoms as tracer particles. The measurements are achieved by shining a tunable single frequency laser beam into the flow. The resonant absorption spectrum of the seeded species is determined by observing the fluorescence signal intensity as a function of excitation wavelength. By comparing the peak absorption wavelength with a reference frequency marker, the flow velocity along the excitation beam can be obtained through the Doppler shift relation. By fitting the spectrum with a theoretical line profile, the static temperature and pressure of the flow an be determined.

Cheng, S. W. S.↗

DSMC simulations of Mach 20 nitrogen flows about a 70 degree blunted cone and its wake

Numerical results obtained with the direct simulation Monte Carlo (DSMC) method are presented for Mach 20 nitrogen flow about a 70-deg blunted cone. The flow conditions simulated are those that can be obtained in existing low-density hypersonic wind tunnels. Three sets of flow conditions are simulated with freestream Knudsen numbers ranging from 0.03 to 0.001. The focus is to characterize the wake flow under rarefied conditions. This is accomplished by calculating the influence of rarefaction on wake structure along with the impact that an afterbody has on flow features. This data report presents extensive information concerning flowfield features and surface quantities.

Moss, James N.↗

Sensitivity of Simulated Radiative Emission from Nitrogen Flows to Chemical Parameters

Numerical models of hypersonic flows rely on chemistry data inferred from experiments and quantum calculations. Experiments from NASA's Electric Arc Shock Tube (EAST) measure the spectral emission of strong shocks in pure nitrogen flows. These spectral profiles are only approximately captured by numerical simulations. To address these discrepancies, one wishes to calibrate some of the chemical parameters to better match experiment. Because there are hundreds of parameters in the numerical model, a sensitivity analysis was carried out on the entire chemistry database to determine which parameters are most important to analyze in the future. In order to perform this work it was necessary to generate a consistent chemical database that interfaced with both the CFD and line-by-line radiation solver. Using Monte Carlo methods, the total Sobol index was calculated for important parameters. Twenty parameters were identified as important across the nitrogen system. However, it was noted that in some spectral regions, the parametric uncertainty was unable to bound EAST measurements. Further improvements could be made by increasing the parameter uncertainties or addressing other sources of modeling error.

Kaelan B Hansson↗

Sensitivity of Simulated Radiative Emission from Nitrogen Flows to Chemical Parameters

Numerical models of hypersonic flows rely on chemistry data inferred from experiments and quantum calculations. Experiments from NASA's Electric Arc Shock Tube (EAST) measure the spectral emission of strong shocks in pure nitrogen flows. These spectral profiles are only approximately captured by numerical simulations. To address these discrepancies, one wishes to calibrate some of the chemical parameters to better match experiment. Because there are hundreds of parameters in the numerical model, a sensitivity analysis was carried out on the entire chemistry database to determine which parameters are most important to analyze in the future. In order to perform this work it was necessary to generate a consistent chemical database that interfaced with both the CFD and line-by-line radiation solver. Using Monte Carlo methods, the total Sobol index was calculated for important parameters. Twenty parameters were identified as important across the nitrogen system. However, it was noted that in some spectral regions, the parametric uncertainty was unable to bound EAST measurements. Further improvements could be made by increasing the parameter uncertainties or addressing other sources of modeling error.

Kaelan Hansson↗

Changing food nitrogen flow in a food-exporting city

Introduction Nitrogen (N) plays a significant role in food systems, but only a fraction of N is effectively utilized and the rest is lost to the environment and negatively affects the ecosystem. So far, there has been relatively little research on N flow associated with the food production and consumption of production-oriented cities in developing countries. Methods In this study, we present a comprehensive analysis of N flow in the food production and consumption system of Changchun in China between 1991 and 2014, and define three types of nitrogen use efficiency (NUE) and compare them. Results (1) Total new N input into the food system in Changchun increased by 63.75% (240.8 to 394.3 Gg N yr −1 ) during the study period, mainly attributable to the high volume of food exports(total output from 47.63 to 72.51 Gg N yr −1 ). (2) Changchun typically exhibited lower apparent NUE and virtual NUE of the food system, while its actual NUE was typically higher, compared to food-importing cities. (3) The consumption of crop food witnessed a decrease from 24.2 Gg N in 1991 to 18.7 Gg N in 2014, whereas the consumption of animal food showed an upward trend from 2.5 Gg N to 7.7 Gg N. Both urban and rural residents consumed less grain food but more fruits and meat. (4) The total N loss has increased from 131.3 Gg N in 1991 to 266.6 Gg N in 2014. The crop production caused 58.1% of the total N loss in 2014, and the atmospheric loss accounted for 40.2% of the total. Conclusion The study has revealed the distinctive features, fluctuations, and underlying drivers of N flow in the food-exporting city, setting it apart from food-importing city. These findings provide a valuable point of reference for the implementation of customized and diversified nitrogen management strategies in these specific urban areas.

Huang, Wei↗

Velocity and temperature profiles in near-critical nitrogen flowing past a horizontal flat plate

Boundary layer velocity and temperature profiles were measured for nitrogen near its thermodynamic critical point flowing past a horizontal flat plate. The results were compared measurements made for vertically upward flow. The boundary layer temperatures ranged from below to above the thermodynamic critical temperature. For wall temperatures below the thermodynamic critical temperature there was little variation between the velocity and temperature profiles in three orientations. In all three orientations the point of crossing into the critical temperature region is marked by a significant flattening of the velocity and temperature profiles and also a decrease in heat transfer coefficient.

Simoneau, R. J.↗

Velocity and temperature profiles in near-critical nitrogen flowing past a horizontal flat plate

Boundary layer velocity and temperature profiles were measured for nitrogen near its thermodynamic critical point flowing past a horizontal flat plate. The heated surface was oriented both facing upward and downward. The results were compared to earlier work in which measurements were made for vertically upward flow. The boundary layer temperatures ranged from below to above the thermodynamic critical temperature. For wall temperatures below the thermodynamic critical temperature there was little variation between the velocity and temperature profiles in the three orientations. In all three orientations the point of crossing into the critical temperature region is marked by a significant flattening of the velocity and temperature profiles and also a decrease in heat transfer coefficient. As the heat flux and, consequently, wall temperature are further increased significant changes occur in the velocity and temperature profiles. Examination of near-critical heat transfer in these three flow orientations offers insights into the relative role of buoyancy forces in this regime.

Simoneau, R. J.↗

Rotational temperature determination in flowing nitrogen using an electron beam

The measurement of rotational temperature by the electron-beam fluorescence technique is investigated for temperatures between 78 K and 300 K by using the 0-0 band of the nitrogen first negative system. Existing methods for calculating the rotational temperature from electron-beam spectra result in values which are higher than the true temperature and the error increases with density and electron-beam current. The errors are believed to arise through neglect of the effects of secondary electrons. Excitation by low-energy secondary electrons can increase the population of the sparsely populated rotational ground states at the expense of the abundantly populated states. This secondary excitation is proposed as the cause of the error in the calculated rotational temperature and a theoretical study determines that the density and beam current govern the excitation rate. Rotational-temperature measurements are made in a flowing stream of nitrogen at a known temperature for a range of densities and beam currents.

Lillicrap, D. C.↗

Computations of unsteady dissociating nitrogen flows

A time-accurate computer program has been developed to solve flows involving nonequilibrium chemical reactions and vibrational relaxation. The program is based on a multidomain approach and an explicit MacCormack scheme. Results are presented for three simple test cases, involving nitrogen dissociation in a closed box.

Marraffa, Lionel↗

Measurements of a supersonic velocity in a nitrogen flow using inverse Raman spectroscopy

Results are presented for supersonic molecular flow-velocity measurements using inverse Raman spectroscopy. The flow velocity, temperature, and density of flowing N2 molecules are measured because of potential wind-tunnel applications. Uncertainties of less than 5% are found for the velocity measurements, while the uncertainties are about 10% for the temperature and density measurements. The laser probe is stabilized by using I2 fluorescence, and I2 saturated absorption is utilized to provide an absolute frequency reference. Differential detection techniques are employed to reduce detection noise.

Herring, G. C.↗

Heat transfer measurements on biconics at incidence in hypersonic high enthalpy air and nitrogen flows

Heat transfer rate measurements have been obtained at 0, 5, 15, and 21 deg angles-of-attack for a straight biconic scale model of an aeroassisted orbital vehicle proposed for planetary probe missions. Heat-transfer distributions were measured using palladium thin-film resistance gauges deposited on a glass-ceramic substrate. The windward heat transfer correlations were based on equilibrium flow in the shock layer of the model, although the flow may depart from equilibrium in the flow-field.

Gai, S. L.↗

A visual study of radial inward choked flow of liquid nitrogen.

Data and high speed movies were acquired on pressurized subcooled liquid nitrogen flowing radially inward through a 0.0076 cm gap. The stagnation pressure ranged from 0.7 to 4 MN/sq m. Steady radial inward choked flow appears equivalent to steady choked flow through axisymmetric nozzles. Transient choked flows through the radial gap are not uniform and the discharge pattern appears as nonuniform impinging jets. The critical mass flow rate data for the transient case appear different from those for the steady case. On the mass flow rate vs pressure map, the slope and separation of the isotherms appear to be less for transient than for steady radial choked flow.

Hendricks, R. C.↗

Acquisition and correlation of cryogenic nitrogen mass flow data through a multiple orifice Joule-Thomson device

Liquid nitrogen mass flow rate, pressure drop, and temperature drop data were obtained for a series of multiple orifice Joule-Thomson devices, known as Visco Jets, over a wide range of flow resistance. The test rig used to acquire the data was designed to minimize heat transfer so that fluid expansion through the Visco Jets would be isenthalpic. The data include a range of fluid inlet pressures from 30 to 60 psia, fluid inlet temperatures from 118 to 164 R, outlet pressures from 2.8 to 55.8 psia, outlet temperatures from 117 to 162 R and flow rate from 0.04 to 4.0 lbm/hr of nitrogen. A flow rate equation supplied by the manufacturer was found to accurately predict single-phase (noncavitating) liquid nitrogen flow through the Visco Jets. For cavitating flow, the manufacturer's equation was found to be inaccurate. Greatly improved results were achieved with a modified version of the single-phase equation. The modification consists of a multiplication factor to the manufacturer's equation equal to one minus the downstream quality on an isenthalpic expansion of the fluid across the Visco Jet. For a range of flow resistances represented by Visco Jet Lohm ratings between 17,600 and 80,000, 100 percent of the single-phase data and 85 percent of the two-phase data fall within + or - 10 percent of predicted values.

Papell, S. Stephen↗

Cryogenic and Simulated Fuel Jet Breakup in Argon, Helium and Nitrogen Gas Flows

Two-phase flow atomization of liquid nitrogen jets was experimentally investigated. They were co-axially injected into high-velocity gas flows of helium, nitrogen and argon, respectively, and atomized internally inside a two-fluid fuel nozzle. Cryogenic sprays with relatively high specific surface areas were produced, i.e., ratios of surface area to volume were fairly high. This was indicated by values of reciprocal Sauter mean diameters, RSMD's, as measured with a scattered- light scanning instrument developed at NASA Lewis Research Center. Correlating expressions were derived for the three atomizing gases over a gas temperature range of 111 to 422 K. Also, the correlation was extended to include waterjet breakup data that had been previously obtained in simulating fuel jet breakup in sonic velocity gas flow. The final correlating expression included a new dimensionless molecular-scale acceleration group. It was needed to correlate RSMD data, for LN2 and H2O sprays, with the fluid properties of the liquid jets and atomizing gases used in this investigation.

Ingebo, Robert D.↗