Search NASA⌕ Search

SEARCH · Search NASA

Results for “Non-Return-to-Zero”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Reduction of amplified spontaneous emission noise using a statistical signal adaptive filter

This paper proposes a statistical signal adaptive filter (SSAF) based on adaptive total variation to reduce amplified spontaneous emission (ASE) noise in optical amplifiers, e.g. erbium doped fiber amplifiers. Non-return-to-zero on–off keying signal to noise ratio (SNR) is degraded by ASE noise. However, this can be improved by squeezing ASE using the proposed SSAF after photodetection to effectively remove the noise by analyzing the signal movement statistically. We obtained 4-dB SNR gain by reducing ASE beat noise compared with not applying SSAF. Simultaneous optical bandpass filter and SSAF application reduced the 2-dB power penalty for a 20-km optical link more than when only SSAF was used.

36 MATERIALS SCIENCE↗

Low-dark current 10 Gbit/s operation of InAs/InGaAs quantum dot p-i-n photodiode grown on on-axis (001) GaP/Si

We demonstrate 10 Gbit/s operation of InAs/InGaAs quantum dot (QD) p-i-n photodiodes (PDs) grown on on-axis (001) GaP/Si substrates. A 3.0 × 50 μm2 QD PD shows a small dark current of 0.2 nA at a bias voltage of −3 V, which corresponds to a dark current density of 0.13 mA/cm2. This low-dark current characteristic obtained from a narrow-stripe device indicates that sidewall and threading dislocations have small effects on the dark current. The 3 dB bandwidth was 5.5 GHz at a bias voltage of −5 V. Large signal measurement with non-return-to-zero signals shows 10 Gbit/s eye opening.

Inoue, D.↗

Changing NRZ data to biphase logic

Simple arrangement of four integrated circuits changes stream of binary data from non-return-to-zero (NRZ) coding to biphase logic coding. Selection of wiring and integrated circuits enables control and balancing of propagation delay without requiring excessive and expensive hardware.

Baker, E. B.↗

Efficient digital encoding scheme

Modified NRZ (non-return-to-zero) code immunizes record and playback systems against dc drift and bit slippage. In order to maximize bit packing density improved code called J-NRZ gives 100 percent NRZ efficiently and solves DC drift problem by adding check bits in specified format when long string is encountered. Remainder of data stream is encoded in NRZ format.

Obrien, D. E., III↗

Multiple speed expandable bit synchronizer

A multiple speed bit synchronizer was designed for installation in an inertial navigation system data decoder to extract non-return-to-zero level data and clock signal from biphase level data. The circuit automatically senses one of four pre-determined biphase data rates and synchronizes the proper clock rate to the data. Through a simple expansion of the basic design, synchronization of more than four binarily related data rates can be accomplished. The design provides an easily adaptable, low cost, low power alternative to external bit synchronizers with additional savings in size and weight.

Bundinger, J. M.↗

Carrier phase recovery performance for PN-spread TDRSS link with radio-frequency interference

The carrier-phase recovery performance of a Costas loop for a nonlinear satellite channel with uplink and downlink noise is analyzed, and the extension of these results to the case where uplink radio-frequency interference (RFI) is present is considered. The signal format here is binary phase-shift-keyed (BPSK) or unbalanced quaternary phase-shift-keyed (UQPSK), the signals being either the non-return-to-zero (NRZ) or biphase (Manchester) type. With UQPSK, at least one data stream must be PN-spread. The channel comprises additive white Gaussian noise (WGN), a wideband filter, a bandpass nonlinearity and more additive WGN. The RFI being considered is pulsed continuous-wave, pulsed WGN, or a combination of the two. It is noted that the Tracking and Data Relay Satellite System (TDRSS) will be subjected to RFI from certain locations, especially in the S-band of frequencies. The characteristics of this link are generalized to form the assumptions underlying this analysis. The analytical results given include the S-curve of the equivalent loop and the phase-error variance of the linearized loop.

Mckenzie, T. M.↗

Effects of NRZ-M Modulation on Convolutional Codes Performance

Non-return-to-zero mark (NRZ-M) modulation is often used to resolve data sense in suppressed carrier telemetry systems because such systems are subject to half cycle slips that result in complementing the encoded data stream. The performance of coded telemetry systems with NRZ-M is sensitive to the order in which the various operations are done. A system that demodulates the NRZ-M waveform and then decodes performs differently from a system that does the decoding first. The performance of the NASA standard (7, 1/2) convolutional codes is determined for several systems using NRZ-M. Several different demodulation schemes for NRZ-M are considered. It is shown that, even for the best soft-decision method examined, there is a 2.7 dB loss at a decoded bit error rate of 0.005 if the NRZ-M demodulation occurs before rather than after Viterbi decoding.

Deutsch, L. J.↗

Fast Clock Recovery for Digital Communications

Circuit extracts clock signal from random non-return-to-zero data stream, locking onto clock within one bit period at 1-gigabitper-second data rate. Circuit used for synchronization in opticalfiber communications. Derives speed from very short response time of gallium arsenide metal/semiconductor field-effect transistors (MESFET's).

Tell, R. G.↗

A 250-Mbit/s ring local computer network using 1.3-microns single-mode optical fibers

A 250-Mbit/s three-station fiber-optic ring local computer network was built and successfully demonstrated. A conventional token protocol was employed for bus arbitration to maximize the bus efficiency under high loading conditions, and a non-return-to-zero (NRS) data encoding format was selected for simplicity and maximum utilization of the ECL-circuit bandwidth.

Eng, S. T.↗

Effects Of Phase Jitter On Lock Detection In QPSK

Report presents study of performances of digital carrier-signal-tracking loops used in reception of radio signals containing quadrature-phase-shift-keyed (QPSK) modulation representing binary non-return-to-zero data. Presents mathematical models of received signal and of noise. Describes lock-detector algorithm and presents equations characterizing lock-detection performance. Equations applied in analyses of three QPSK carrier-tracking loops: Costas crossover loop, maximum a posteriori estimation loop, and generalized Costas loop. Results of computer simulations agree with equations.

Mileant, Alexander↗

Open-Loop Acquisition Of Suppressed Carrier Signals

Three digital techniques for open-loop acquisition of suppressed carrier signals in presence of binary-phase-shift-keyed (BPSK) modulation representing non-return-to-zero (NRZ) data symbols. Based on assumption that offset, tau, between timing of symbols and clock in receiver unknown, but fixed fraction of symbol period, T. In all three, fast Fourier transforms (FFT's) performed on outputs of integrate-and-dump filters that are parts of Costas-type loops used to demodulate BPSK signals. Timing of integrate-and-dump filters constant. Outputs mixed to obtain an error signal.

Shah, Biren N.↗

Behavior Of Costas Loop In Reception Of Telemetry

Report presents study of behavior of Costas loop in reception of binary non-return-to-zero telemetry signal phase-shift-modulated onto sinusoidal or square-wave subcarrier signal in turn phase-modulated onto carrier signal. Equations describe degradation of performance of Costas loop in terms of phase jitter, conditions causing loss of lock, and other effects. Costas loop used to track telemetry signal with residual carrier in presence of Doppler shift. Performance optimized by suitable choice of bit rate, waveform and frequency of subcarrier, and noise bandwidth of filters in arms of Costas loop.

Nguyen, Tien Manh↗

Effects Of Asymmetry Of NRZ Data Signals On Performance

Report presents theoretical analysis of effects of asymmetry in binary non-return-to-zero (NRZ) data signals upon performance of radiotelemetry system. Simple mathematical model predicting overall degradation of bit signal-to-noise ratio of telemetry system derived. Shows degradation increases with asymmetry.

Nguyen, Tien M.↗

Three Alternative Symbol-Lock Detectors

Three symbol-lock detectors proposed as alternatives in advanced receivers processing non-return-to-zero binary data signals. Two perform operations similar to those of older square-law and absolute-value types. However, integrals computed during nonoverlapping symbol periods and, therefore, only one integrator needed in each such detector. Proposed detectors simpler, but performances worse because noises in overlapping samples correlated, whereas noises in nonoverlapping samples not correlated. Third detector is signal-power-estimator type. Signal integrated during successive half symbol cycles, and therefore only one integrator needed. Half-cycle integrals multiplied to eliminate effect of symbol polarity, and products accumulated during M-cycle observation period to smooth out estimate of signal power. If estimated signal power exceeds threshold, delta, then lock declared.

Shihabi, Mazen M.↗

Compensating For Unbalance In Pulse-Code Phase Modulation

Algorithm proposed for use in pulse-code phase-modulation transmitter in which non-return-to-zero (NRZ) or biphase data modulated directly onto radio-frequency residual carrier signal. Devised to compensate somewhat for effect, upon distant receiver, of unbalance in stream of transmitted data. Formulated to compute combinations of modulation index, data rate, and transmitter power compensating for measured unbalance in transmitted data stream.

Nguyen, Tien M.↗

Effect Of Transition Density On Performance Of A DTTL

One estimates minimum transition density needed to limit symbol-error rate. Theoretical calculations and accompanying computer simulations provide numerical basis for specification of minimum data-transition density needed for adequate performance of radio receiver processing noisy signal containing non-return-to-zero (NRZ) stream of data symbols (bits). By use of digital-data-transition-tracking loop (DTTL), receiver strives to synchronize operation with data symbols. Performance of receiver in terms of ability to keep symbol-error rate (SER) in output of receiver below specified level depends on symbol signal-to-noise ratio (SSNR) of incoming signal and on degree of synchronization. Ability of DTTL to maintain synchronization depends partly on SSNR and partly on data-transition density.

Nguyen, Tien M.↗

Noncoherent DTTLs for Symbol Synchronization

Noncoherent data-transition tracking loops (DTTLs) have been proposed for use as symbol synchronizers in digital communication receivers. [Communication- receiver subsystems that can perform their assigned functions in the absence of synchronization with the phases of their carrier signals ( carrier synchronization ) are denoted by the term noncoherent, while receiver subsystems that cannot function without carrier synchronization are said to be coherent. ] The proposal applies, more specifically, to receivers of binary phase-shift-keying (BPSK) signals generated by directly phase-modulating binary non-return-to-zero (NRZ) data streams onto carrier signals having known frequencies but unknown phases. The proposed noncoherent DTTLs would be modified versions of traditional DTTLs, which are coherent. The symbol-synchronization problem is essentially the problem of recovering symbol timing from a received signal. In the traditional, coherent approach to symbol synchronization, it is necessary to establish carrier synchronization in order to recover symbol timing. A traditional DTTL effects an iterative process in which it first generates an estimate of the carrier phase in the absence of symbol-synchronization information, then uses the carrier-phase estimate to obtain an estimate of the symbol-synchronization information, then feeds the symbol-synchronization estimate back to the carrier-phase-estimation subprocess. In a noncoherent symbol-synchronization process, there is no need for carrier synchronization and, hence, no need for iteration between carrier-synchronization and symbol- synchronization subprocesses. The proposed noncoherent symbolsynchronization process is justified theoretically by a mathematical derivation that starts from a maximum a posteriori (MAP) method of estimation of symbol timing utilized in traditional, coherent DTTLs. In that MAP method, one chooses the value of a variable of interest (in this case, the offset in the estimated symbol timing) that causes a likelihood function of symbol estimates over some number of symbol periods to assume a maximum value. In terms that are necessarily oversimplified to fit within the space available for this article, it can be said that the mathematical derivation involves a modified interpretation of the likelihood function that lends itself to noncoherent DTTLs. The proposal encompasses both linear and nonlinear noncoherent DTTLs. The performances of both have been computationally simulated; for comparison, the performances of linear and nonlinear coherent DTTLs have also been computationally simulated. The results of these simulations show that, among other things, the expected mean-square timing errors of coherent and noncoherent DTTLs are relatively insensitive to window width. The results also show that at high signal-to-noise ratios (SNRs), the performances of the noncoherent DTTLs approach those of their coherent counterparts at, while at low SNRs, the noncoherent DTTLs incur penalties of the order of 1.5 to 2 dB.

Simon, Marvin↗