SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The use of a photographic pyrometer for nonintrusive measurement of high temperature surfaces in a wind tunnel test is described. The advantages of the pyrometer for measuring surfaces whose unique shape makes use of thermocouples difficult are pointed out. The use of computer operated densitometers or optical processors for the data reduction is recommended.
This paper reports the results of the scale model (1/22) testing of candidate refractory materials to be used as surface coatings for a solid rocket motor plume deflector structure. Five ROM tests were conducted to acquire data to support the selection, thickness determination, and placement of the materials. All data acquisition was achieved through nonintrusive methods. The tests demonstrated that little or no reductions in performance of the full-scale deflector would be experienced if the most economical materials were selected for construction.
The bypass duct of an aircraft engine is a low-pass filter allowing some spinning modes to radiate outside the duct. The knowledge of the radiated modes can help in noise reduction, as well as the diagnosis of noise generation mechanisms inside the duct. We propose a nonintrusive technique using a circular microphone array outside the engine measuring the complex noise spectrum on an arc of a circle. The array is placed at various axial distances from the inlet or the exhaust of the engine. Using a model of noise radiation from the duct, an overdetermined system of linear equations is constructed for the complex amplitudes of the radial modes for a fixed circumferential mode. This system of linear equations is generally singular, indicating that the problem is illposed. Tikhonov regularization is employed to solve this system of equations for the unknown amplitudes of the radiated modes. An application of our mode detection technique using measured acoustic data from a circular microphone array is presented. We show that this technique can reliably detect radiated modes with the possible exception of modes very close to cut-off.
The application of the Lockheed-Georgia 2-D laser velocimeter (LV) burst-counter system to the flow field around a 2- and 3-element high-lift airfoil is discussed. The characteristic behavior of the confluent boundary layer (that is, the boundary layer existing downstream of a slot as it approaches and undergoes separation is evaluated. In this application, the LV represents all ideal instruments for nonintrusively probing into the narrow slots and cove areas characterizing mechanical high-lift systems. The work is being performed in the Lockheed-Georgia 10 x 30-inch low-speed test facility using a 9-inch (basic) chord section of the general aviation GAW-1 airfoil. The LV system employs a 4-W argon laser and operates in an off-axis, backscatter mode with a focus length of about 30 inches. Smoke is used as the seeding medium and is injected downstream of the model such that particle uniformity and size are constant upon completion of the tunnel circuit into the test area. The LV system is fully automated by utilizing a MAC-16 minicomputer for positioning, data acquisition, and preliminary data reduction.