SEARCH · Search NASA
Results for “Nozomi”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Experimental and Numerical Study on the Effect of Nitric Oxide on Autoignition and Knock in a Direct-Injection Spark-Ignition Engine
We report Nitric Oxide (NO) can significantly influence the autoignition reactivity and this can affect knock limits in conventional stoichiometric SI engines. Previous studies also revealed that the role of NO changes with fuel type. Fuels with high RON (Research Octane Number) and high Octane Sensitivity (S = RON – MON (Motor Octane Number)) exhibited monotonically retarding knocklimited combustion phasing (KL-CA50) with increasing NO. In contrast, for a high-RON, low-S fuel, the addition of NO initially resulted in a strongly retarded KL-CA50 but beyond the certain amount of NO, KL-CA50 advanced again. The current study focuses on same high-RON, low-S Alkylate fuel to better understand the mechanisms responsible for the reversal in the effect of NO on KLCA50 beyond a certain amount of NO. Experiments were conducted to measure the responses of KL-CA50 and trace-autoignition CA50, the latter being indicative of CA50 at which end-gas autoignition starts to become measurable from the apparent heat-release rate. Chemical-kinetics simulations were conducted to reveal the role of NO for end-gas autoignition, with a specific focus on sequential autoignition in a thermally stratified end-gas. The simulation results reveal that the magnitude of low-temperature heat release (LTHR) generally increases with NO. However, the relative importance of NO for enhancing LTHR diminishes when the LTHR inherent to a fuel’s chemistry is strong, such as at lower temperatures in a thermal boundary layer. This rendered more uniform LTHR within a hypothetical thermal boundary and led to a more sequential (i.e. slower) autoignition event. It was also revealed that a change in compression ratio influences the importance of intermediate-temperature heat release (ITHR) due to changes of the temperature-pressure history of the end-gas. Together with the condition where end-gas autoignition occurs more sequentially, the shorter time spent in LTHR and ITHR regime can counter the increase in autoignition reactivity at high NO levels and allow KLCA50 to advance
Distinguishing Elements at the Sub‐Nanometer Scale on the Surface of a High Entropy Alloy
Materials in crystalline form possess translational symmetry (TS) when the unit cell is repeated in real space with long- and short-range orders. The periodic potential in the crystal regulates the electron wave function and results in unique band structures, which further define the physical properties of the materials. Amorphous materials lack TS due to the randomization of distances and arrangements between atoms, causing the electron wave function to lack a well-defined momentum. High entropy materials provide another way to break the TS by randomizing the potential strength at periodic atomic sites. The local elemental distribution has a great impact on physical properties in high entropy materials. It is critical to distinguish elements at the sub-nanometer scale to uncover the correlations between the elemental distribution and the material properties. Here, the use of synchrotron X-ray scanning tunneling microscopy (SX-STM) with sub-nm scale resolution in identifying elements on a high entropy alloy (HEA) surface is demonstrated. By examining the elementally sensitive X-ray absorption spectra with an STM tip to enhance the spatial resolution, the elemental distribution on an HEA's surface at a sub-nm scale is extracted. In conclusion, these results open a pathway towards quantitatively understanding high entropy materials and their material properties.
Does Selectivity of Molecular Catalysts Change with Time? Polymerization Imaged by Single‐Molecule Spectroscopy
Abstract The chemoselectivity of molecular catalysts underpins much of modern synthetic organic chemistry. However, little is known about the selectivity of individual catalysts because this single‐catalyst‐level behavior is hidden by the bulk catalytic behavior. Here, for the first time, the selectivity of individual molecular catalysts for two different reactions is imaged in real time at the single‐catalyst level. This imaging is achieved through fluorescence microscopy paired with spectral probes that produce a snapshot of the instantaneous chemoselectivity of a single catalyst for either a single‐chain‐elongation or a single‐chain‐termination event during ruthenium‐catalyzed polymerization. Superresolution imaging of multiple selectivity events, each at a different single‐molecular ruthenium catalyst, indicates that catalyst selectivity may be unexpectedly spatially and time‐variable.
Does Selectivity of Molecular Catalysts Change with Time? Polymerization Imaged by Single-Molecule Spectroscopy
The chemoselectivity of molecular catalysts underpins much of modern synthetic organic chemistry. However, little is known about the selectivity of individual catalysts because this single-catalyst-level behavior is hidden by the bulk catalytic behavior. In this work, for the first time, the selectivity of individual molecular catalysts for two different reactions is imaged in real time at the single-catalyst level. This imaging is achieved through fluorescence microscopy paired with spectral probes that produce a snapshot of the instantaneous chemoselectivity of a single catalyst for either a single-chain-elongation or a single-chain-termination event during ruthenium-catalyzed polymerization. Superresolution imaging of multiple selectivity events, each at a different single-molecular ruthenium catalyst, indicates that catalyst selectivity may be unexpectedly spatially and time-variable.
Inline small-angle X-ray scattering-coupled chromatography under extreme hydrostatic pressure
As continuing discoveries highlight the surprising abundance and resilience of deep ocean and subsurface microbial life, the effects of extreme hydrostatic pressure on biological structure and function have attracted renewed interest. Biological small-angle X-ray scattering (BioSAXS) is a widely used method of obtaining structural information from biomolecules in solution under a wide range of solution conditions. Due to its ability to reduce radiation damage, remove aggregates, and separate monodisperse components from complex mixtures, size-exclusion chromatography-coupled SAXS (SEC-SAXS) is now the dominant form of BioSAXS at many synchrotron beamlines. While BioSAXS can currently be performed with some difficulty under pressure with non-flowing samples, it has not been clear how, or even if, continuously flowing SEC-SAXS, with its fragile media-packed columns, might work in an extreme high-pressure environment. Here we show, for the first time, that reproducible chromatographic separations coupled directly to high-pressure BioSAXS can be achieved at pressures up to at least 100 MPa and that pressure-induced changes in folding and oligomeric state and other properties can be observed. Further, the apparatus described here functions at a range of temperatures (0°C–50°C), expanding opportunities for understanding biomolecular rules of life in deep ocean and subsurface environments.
Creation of Multi-Principal Element Alloy NiCoCr Nanostructures via Nanosecond Laser-Induced Dewetting
The multi-principal element alloy nanoparticles (MPEA NPs), a new class of nanomaterials, present a highly rewarding opportunity to explore new or vastly different functional properties than the traditional mono/bi/multimetallic nanostructures due to their unique characteristics of atomic-level homogeneous mixing of constituent elements in the nanoconfinements. Here, in this paper, the successful creation of NiCoCr nanoparticles, a well-known MPEA system is reported, using ultrafast nanosecond laser-induced dewetting of alloy thin films. Nanoparticle formation occurs by spontaneously breaking the energetically unstable thin films in a melt state under laser-induced hydrodynamic instability and subsequently accumulating in a droplet shape via surface energy minimization. While NiCoCr alloy shows a stark contrast in physical properties compared to individual metallic constituents, i.e., Ni, Co, and Cr, yet the transient nature of the laser-driven process facilitates a homogeneous distribution of the constituents (Ni, Co, and Cr) in the nanoparticles. Using high-resolution chemical analysis and scanning nanodiffraction, the environmental stability and grain arrangement in the nanoparticles are further investigated. Thermal transport simulations reveal that the ultrashort (≈100 ns) melt-state lifetime of NiCoCr during the dewetting event helps retain the constituent elements in a single-phase solid solution with homogenous distribution and opens the pathway to create the unique MPEA nanoparticles with laser-induced dewetting process.
Understanding non-stochiometric deposition of multi-principal elemental NiCoCr thin films
Multi-principal elemental NiCoCr thin films with compositional flexibility have potential applications as a thermal barrier, corrosion-resistant coatings, and functional energy materials. In this study, the non-stochiometric multi-principal element alloy thin film formation behavior from an equiatomic ablation target of NiCoCr using pulsed laser deposition has been reported. Here, the effect of varying laser fluence on compositions of constituent elements in the NiCoCr thin films is systematically investigated. The increase in laser fluence typically increases the likelihood of acquiring undesirable particulates in thin films. Therefore, to maintain the film quality the laser fluences are adjusted within the range of 1.3–3.3 J·cm -2 , while the film thicknesses are kept constant at ~30 nm. Results show that the constituent elements are well-distributed in the formed NiCoCr thin films, however, having average atomic percentages of Ni and Cr twice as high as Co irrespective of the equiatomic composition of individual elements in the ablation target. This stochiometric alteration in the as-deposited thin films is governed by the rate of ablation and subsequent evaporation of each element, which is facilitated by the optical properties and vapor pressure of individual constituent elements. Additionally, electron energy-loss spectroscopy and x-ray absorption spectroscopy analysis reveal that the thin films have partially oxidized, with the Cr oxidation contributing the most to the O-K edge in comparison to Ni and Co. Finally, this study presents a laser-assisted pathway for fabricating compositionally flexible NiCoCr thin films and develops an understanding of the non-equilibrium laser-material interactions and how the intrinsic properties of constituent elements affect the stoichiometric flow of materials from the target to the final film deposition.
Small-angle X-ray scattering studies of enzymes
Explore the source record for details and available documents.
Strong effect of liquid Fe–S on elastic wave velocity of olivine aggregate: Implication for the low velocity anomaly at the base of the lunar mantle
The origin of the seismic low velocity zone (LVZ) observed at the base of the lunar mantle is important for understanding the nature of the lunar mantle. Liquid Fe–S is considered as a possible candidate of the cause of the LVZ. However, effect of liquid Fe–S on elastic wave velocity of mantle rock has been considered to be minor, according to theoretical estimation based on the high dihedral angle of liquid Fe–S in olivine aggregate observed in previous microstructural analysis of polished sample cross sections. Here, in this work, we carry out direct measurements of elastic wave velocities of liquid Fe–S-bearing olivine aggregate and report strong reduction of the elastic wave velocities in the presence of liquid Fe–S. The effects of liquid Fe–S in olivine aggregates are much more pronounced than the theoretical estimation. Three-dimensional X-ray microtomography analysis reveals that the geometry of liquid Fe–S strongly depends on the size, with larger liquid Fe–S blobs having low aspect ratios, which may predominantly affect elastic wave velocity. Since smaller spherical Fe–S blobs are much more abundant than the larger elongated blobs, conventional dihedral angle analyses based on scanning electron microscope images tend to statistically over-sample smaller blobs and under-sample larger blobs. Our results suggest that the LVZ at the base of the lunar mantle can be explained by the presence of 4.3–5.0 vol.% liquid Fe–S. The LVZ may be a hidden reservoir of highly siderophile elements (HSEs), which may explain the low abundance of HSEs in the lunar mantle compared to the Earth.
Lithium and boron isotopic compositions of olivine in chondrules from carbonaceous and ordinary chondrite meteorites: Implications for the origin of solar 11 B/ 10 B ratio
We report the origin of solar 11 B/ 10 B ratio ~4 remains an open question. It has been thought that a significant portion of boron in the Solar System was derived from continuous spallation nucleosynthesis during interactions between Galactic Cosmic Rays and C—N—O nuclei in the interstellar medium. However, because GCR-produced boron is characterized by 11 B/ 10 B ~2.5, an endmember with 11 B/ 10 B > 4 is required to account for the solar 11 B/ 10 B ratio. Two leading hypotheses for the sources of 11 B-rich components include low energy spallation in the Sun’s parental molecular cloud and the neutrino process during the supernova explosions. In this study, lithium and boron elemental and isotopic compositions of seven porphyritic olivine chondrules and one isolated olivine crystal from four meteorites (Allende, Yamato 81020, Asuka 12236, and QUE 97008) were determined in-situ to help constrain which of the two nucleosynthetic mechanisms has most likely supplied the forming Solar System with extra 11 B. Apparent isotopic variations in Li/Si, B/Si, δ 7 Li and δ 11 B were found in chondrule olivine crystals, but only three chondrules exhibit statistically resolved δ 11 B heterogeneities. Using these three chondrules as a basis for discussion, we evaluated the processes that could potentially cause elemental and isotopic variations of Li and B. We argue that the data can be best understood in the context of condensation of lithium-boron-rich material onto chondrule precursors in (an) initially heterogeneous gaseous reservoir(s), which could be realized if the Solar System derived 11 B-rich components from a supernova or supernovae.
HIDALGO: A FUN object from the earliest epoch of the solar system’s history
Not Available
Mineralogical and isotopic constraints on early, high-temperature events and reservoirs recorded in the interior of a Type B Ca-Al-rich inclusion from the reduced CV3 chondrite Vigarano
A coordinated mineralogical and oxygen and Al-Mg isotopic study of a Type B Ca-Al-rich inclusion (CAI) from the reduced CV3 chondrite Vigarano was carried out using electron microprobe analysis, transmission electron microscopy, and secondary ion mass spectrometry. This CAI, a once molten igneous object, shows heterogeneous oxygen isotopic compositions among its constituent mineral phases. Spinel is uniformly 16 O-rich with Δ 17 O ≤ −23 ‰. The Δ 17 O values of Al,Ti-diopside in the CAI core range from −11 ‰ to −18 ‰, which are positively correlated with its TiO 2 contents, whereas diopside in the Wark–Lovering (WL) rim is 16 O-rich with Δ 17 O = −23 ‰. Melilite in the CAI mantle shows Δ 17 O values ≤ −10 ‰ only when Åk <15 but becomes more 16 O-poor (Δ 17 O = −3 ‰ to −9 ‰) when Åk >15 . These correlated chemical and oxygen isotopic variations were likely established during crystallization of melilite and Al,Ti-diopside from a partial melt, while spinel preserves the original 16 O-rich composition of the CAI precursor. We infer that a partial melt was isotopically evolving from 16 O-rich to 16 O-poor during melilite crystallization, then back to 16 O-rich during Al,Ti-diopside crystallization via exchange with different gas reservoirs of 16 O-poor and 16 O-rich compositions during heating event(s). Our Al-Mg isotopic measurements of the CAI core and mantle define a single isochron with an inferred initial 26 Al/ 27 Al ratio of (4.93 ± 0.18) × 10 −5 , indistinguishable from that of the WL rim. This indicates that multiple high-temperature events and oxygen isotope exchange with isotopically distinct gas reservoirs occurred rapidly during the CAI formation.
Tuning Enzyme Thermostability via Computationally Guided Covalent Stapling and Structural Basis of Enhanced Stabilization
Enhancing the thermostability of enzymes without impacting their catalytic function represents an important yet challenging goal in protein engineering and biocatalysis. We recently introduced a novel method for enzyme thermostabilization that relies on the computationally guided installation of genetically encoded thioether “staples” into a protein via cysteine alkylation with the noncanonical amino acid O-2-bromoethyl tyrosine (O2beY). Here, we demonstrate the functionality of an expanded set of electrophilic amino acids featuring chloroacetamido, acrylamido, and vinylsulfonamido side-chain groups for protein stapling using this strategy. Using a myoglobin-based cyclopropanase as a model enzyme, our studies show that covalent stapling with pchloroacetamido-phenylalanine (pCaaF) provides higher stapling efficiency and enhanced stability (thermodynamic and kinetic) compared to the other stapled variants and the parent protein. Interestingly, molecular simulations of conformational flexibility of the cross-links show that the pCaaF staple allows fewer energetically feasible conformers than the other staples, and this property may be a broader indicator of stability enhancement. Using this strategy, pCaaF-stapled variants with significantly enhanced stability against thermal denaturation (ΔT m ' = +27 °C) and temperature-induced heme loss (ΔT 50 = +30 °C) were obtained while maintaining high levels of catalytic activity and stereoselectivity. Crystallographic analyses of singly and doubly stapled variants provide key insights into the structural basis for stabilization, which includes both direct interactions of the staples with protein residues and indirect interactions through adjacent residues involved in heme binding. This work expands the toolbox of protein stapling strategies available for protein stabilization.
Mapping Competitive Reduction upon Charging in LiNi 0.8 Co 0.15 Al 0.05 O 2 Primary Particles
Side reactions involving surface reduction play a critical role in the failure of LiNi 0.8 Co 0.15 Al 0.05 O 2 to reach its theoretical capacity as a cathode material for Li-ion batteries. While macroscopic consequences are known, the underlying nanoscopic mechanisms are not fully elucidated. By coupling X-ray spectroscopy with several X-ray microscopy modalities, we have spatially resolved the extent of Ni oxidation at several states of charge and uncovered heterogeneity that is hidden when considering ensemble measurements alone. The use of morphologically controlled particles enabled high-resolution imaging of these materials, uncovering gradients of Ni oxidation states within individual primary particles. At high states of charge, these gradients revealed regions of possible oxygen deficiency extending deeper into the particle than previously observed. Surface-sensitive X-ray coupled scanning tunneling microscopy allows oxidation states to be measured at the material's surface, showing predominantly Ni II in the first atomic layer and mixtures of Ni II with Ni III /Ni IV already appearing 1.5 nm into the particle. These results reveal the subtle interplay between irreversible surface transformations and the bulk reactions that ultimately define function, which will refine strategies of surface passivation that are key to overcoming current performance limitations.
Impact of Transition Metal Doping on the Structural and Optical Properties of Halide Perovskites
Metal ion doping into halide perovskite materials is a promising approach to enhance long-term film stability and improve solar cell performance. Moreover, the idea of doping metals into halide perovskites is also driven by applications in heterogeneous catalysis. Here, we investigate the incorporation of the transition metals Pt and Pd into mixed-halide perovskite materials. We find that Pt aggregates in large clusters in iodine- and bromine-rich perovskite film compositions, whereas Pd incorporation depends on the underlying bromine to iodine ratio. Furthermore, by using optical and structural characterization methods, we observe that phase segregation in the perovskite layer is suppressed upon doping of either of these metals into the material. This approach further shows the potential to obtain catalytically active halide perovskite films in which the perovskite can serve as a host matrix.
Cooling Mixed A-Site Halide Perovskites: Impact of Temperature on Optical and Structural Properties
The widespread utilization of perovskite-based photovoltaics requires probing both the structural and optical properties under extreme operating conditions to gain a holistic understanding of the material behavior under stressors. Here, in this study, we investigate the temperature-dependent behavior of mixed A-site cation lead triiodide perovskite thin films (85% methylammonium and 15% formamidinium) in the range from 300 to 20 K. Through a combination of optical and structural techniques, we find that the tetragonal-to-orthorhombic phase transition occurs at similar to 110 K for this perovskite composition, as indicated by the change in the diffraction pattern. With decreasing temperature, the quantum yield increases with a concurrent elongation of the carrier lifetimes, indicating suppression of nonradiative recombination pathways. Interestingly, in contrast to single A-site cation perovskites, an additional optical transition appears in the absorption spectrum when the phase transition is approached, which is also reflected in the emission spectrum. We propose that the splitting of the optical absorption and emission is due to local segregation of the mixed cation perovskite during the phase transition.
X-ray Spectroscopy of a Rare-Earth Molecular System Measured at the Single Atom Limit at Room Temperature
Not Available