SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Photos to use within the Nuclear Materials and Fuels Library (NFML) factsheet, Nuclear Science User Facilities (NSUF) site, or other public articles.
The Reactor Pressure Vessel task of the LWRS Program works with various organizations to obtain archival surveillance materials from commercial nuclear power plants to allow for comparisons of the irradiation-induced microstructural features from reactor surveillance materials with those from similar materials irradiated under high flux conditions in test reactors, such as the UCSB ATR-2 experiment. This report, originally submitted as a Level 3 Milestone M3LW-14OR0402012 – “Complete report on post-irradiation examination plan for ORNL and University of California Santa Barbara assessment of ATR-2 capsules,” has been expanded to providing a reference to access and / or perform characterization of irradiated archival RPV materials that were transferred to the Nuclear Science User Facility (NSUF), Nuclear Fuels and Materials Library (NFML).
Even though nanocrystalline materials (20-100 nm) present an unprecedented potential, scientific knowledge related to the effect of neutron irradiation on the mechanical properties and microstructure is still scarce. Most of the past studies were conducted using ion irradiation which may not have the same effect as neutron irradiation because of the smaller irradiation volume and the higher dose rate. To reach a firm conclusion on the potential of nanocrystalline materials for nuclear reactor applications, extensive study of model metals with different stacking fault energy (SFE) is required to elucidate their behavior in radiation environments. Nanocrystalline copper and nickel are typically chosen because they are commonly used as model FCC metals in studies of radiation effects. Nickel is an FCC metal with a high stacking-fault energy (~125 mJ/m 2 ) compared to copper (~45 mJ/m 2 ). Hence, microcrystalline and nanocrystalline nickel samples were irradiated in the INL’s Advanced Test Reactor (ATR), as a part of FY08 North Carolina State University NSUF Irradiation Experiment# 96 to evaluate the irradiation behavior of these materials. The objective of this FY20 NSUF project# 19122 is to perform PIE (at PNNL NSUF facility) on previously ATR-neutron irradiated (1.2 and 2.6 dpa; 80-89°C) nanocrystalline and microcrystalline nickel samples to investigate the changes in mechanical properties and microstructures and evaluate whether nanocrystalline nickel is relatively more radiation resistant compared to conventional microcrystalline nickel. To perform PIE at PNNL, sixteen neutron irradiated specimens (microcrystalline and nanocrystalline) were transferred from the NSUF Nuclear Fuels and Materials Library at INL. Experimental techniques such as SEM/EBSD, XRD, TEM, Vickers microhardness and tensile testing were employed to characterize the effect of neutron irradiation on the microstructure and mechanical properties of nanocrystalline nickel and compared them with corresponding characteristics of microcrystalline nickel.
This presentation details the activities of the NFML for FY 2021.
Annual report for work completed during FY-21 for the Nuclear Science User Facilities
The U.S. Nuclear Regulatory Commission (NRC) uses the computer code Fuel Analysis under Steady-state and Transients (FAST) to model steady-state and transient fuel behavior to support regulatory decisions. FAST relies on a material properties library (MatLib) that contains the thermal and mechanical properties of the nuclear materials and coolants of interest to support the US commercial nuclear industry. MatLib contains properties for a variety of nuclear fuels, cladding and other structural materials, gases, and coolants. In this document, material property correlations for the materials contained within MatLib are presented and discussed. When available, comparisons are made between the material property correlations and available data. Additionally, uncertainties are quantified on the material proper- ties, which is then used by the NRC to support uncertainty quantification for best-estimate plus uncertainty safety evaluation reviews. This document describes MatLib-1.2, which was updated from MatLib-1.1 to include cleanup of the code for streamlined calls to MatLib from the main FAST source code, and to enable easier readability of the code by developers that maintain and enhance the FAST code. The results of MatLib did not change between MatLib-1.1 and MatLib-1.2; however, the source code changes warranted incrementing the minor numbering of the software version number. The changes may result in faster execution times of FAST-1.2 as compared to FAST-1.1. This document is one of a series of documents on FAST; the other documents detail the models used by FAST as well as its integral assessment to experiments and commercial data.
The U.S. Nuclear Regulatory Commission (NRC) uses the computer code Fuel Analysis under Steady-state and Transients (FAST) to model steady-state and transient fuel behavior to support regulatory decisions. FAST relies on a material properties library (MatLib) that contains the thermal and mechanical properties of the nuclear materials and coolants of interest to support the U.S. commercial nuclear industry. MatLib contains properties for a variety of nuclear fuels, cladding and other structural materials, gases, and coolants. In this document, material property correlations for the materials contained within MatLib are presented and discussed. When available, comparisons are made between the material property correlations and available data. Additionally, uncertainties are quantified on the material properties, which is then used by the NRC to support uncertainty quantification for best-estimate plus uncertainty safety evaluation reviews. This document describes MatLib-1.2.2, updated from MatLib-1.2.1 to include additional properties for metallic fuel. It is one of a series of documents on FAST; the other documents detail the models used by FAST as well as its integral assessment to experiments and commercial data.
The U.S. Nuclear Regulatory Commission (NRC) uses the computer code Fuel Analysis under Steady-state and Transients (FAST) to model steady-state and transient fuel behavior to support regulatory decisions. FAST relies on a material properties library (MatLib) that contains the thermal and mechanical properties of the nuclear materials and coolants of interest to support the US commercial nuclear industry. MatLib contains properties for a variety of nuclear fuels, cladding and other structural materials, gases, and coolants. In this document, material property correlations for the materials contained within MatLib are presented and discussed. When available, comparisons are made between the material property correlations and available data. Additionally, uncertainties are quantified on the material properties, which is then used by the NRC to support uncertainty quantification for best-estimate plus uncertainty safety evaluation reviews. This document describes MatLib-1.1, which was updated from MatLib-1.0 to include the addition of Lua functionality and code changes for integration with FAST. The results of MatLib did not change between MatLib-1.0 and MatLib-1.1; however, the source code changes warranted incrementing the minor numbering of the software version number. This document is one of a series of documents on FAST; the other documents detail the models used by FAST as well as its integral assessment to experiments and commercial data.
Sandia National Laboratories develops and maintains several open-source software packages to support material accountancy analyses. This includes the Material Accountancy Performance Indicator Toolkit (MAPIT), the Fissile Facility Flow Modeler (F3M) and the Separation and Safeguards Performance Model Library (SSPM-L). MAPIT is responsible for performing statistical safeguards analyses on bulk and itemized data from nuclear fuel cycle facilities and can operate on real or synthetic data. MAPIT is the only open-source software for such analyses. F3M is a library of modules, built in MATLAB Simulink, that contain pre made blocks to represent different generic fuel cycle processes. These blocks can be used together in a modular fashion to represent and simulate nuclear fuel cycle processes with the goal of improving facility-level accountancy during the design phase. F3M is also an open-source library. Finally, the SSPM-L library is a series of completed models built from F3M. The library includes facility models such as a generic PUREX facility and a fuel fabrication facility. The SSPM-L library is not open source, but is available to collaborators with a relevant use case. These tools include modeling and simulation pipelines to simulate nuclear fuel cycle facilities and the underlying software needed to simulate measurement uncertainty and perform statistical analyses. Together, these tools can perform end-to-end nuclear material accountancy analyses. This report documents the various improvements made to these tools in FY25. Specifically, we added new statistical test, new statistical modeling capabilities, new fuel cycle facility models, and launched a new open-source model component library.
A complete library of independent fission product yields including covariance information was generated by a sequential Bayesian methodology whose prior information consisted of independent fission product yields and branching ratios of the possible decay modes reported in the recently released ENDF/B-VIII.0 nuclear data library. The Bayesian procedure consisted in the adjustment of independent fission product yields to match the set of stable and long-lived cumulative yields reported in the ENDF/B-VIII.0 nuclear data library which, in this work, were considered as legacy values together with their uncertainties. According to the χ 2 -metric, the results obtained by this methodology show a systematic improvement in the agreement with legacy reported cumulative yields for the entire adjusted independent fission product yield library.
Galaxy Serpent is an ongoing series of virtual, web-based international tabletop exercises designed to advance the application of National Nuclear Forensics Libraries (NNFLs) in investigations involving nuclear and other radioactive material found out of regulatory control. Here, this iteration emphasized interactions between scientific teams and mock investigative entities. Participants utilized their provided NNFLs to assess material consistency with a provided database of holdings, assign confidence levels, and identify key characteristics relevant to investigative queries. The exercise highlighted both challenges encountered and lessons learned, and advanced best practices for integrating a NNFL into nuclear forensics as part of an investigation.
After being used in nuclear installations, depleted fuel can still be highly reactive and must be handled securely to prevent any radiological or criticality concerns. In particular, spent fuel from use in nuclear power reactors must be stored and transported in specifically designed containers using neutron absorber materials to prevent criticality. Various neutron absorber material types exist and are manufactured by various entities, as thoroughly described in the Handbook of Neutron Absorber Materials for Spent Nuclear Fuel Storage and Transportation Applications written by EPRI. Presently, one of the most modern and most widely used types of neutron absorber material contains particles of boron carbide, or B 4 C, embedded in aluminum matrix: Boralcan, manufactured by Rio Tinto. It is very important for the community to know as much as possible about such neutron absorber materials. Therefore, in the recent years, a US Department of Energy National Nuclear Security Administration–Nuclear Criticality Safety Program funded project initiated design of an experiment that places Boralcan neutron-absorbing plates in an established critical assembly using low-enriched uranium fuel at the Sandia Pulsed Reactor Facility/Critical Experiments (SPRF/CX) apparatus at Sandia National Laboratories. The goal of the experiment is to produce high-quality benchmark data to submit to the International Criticality Safety Benchmark Evaluation Project (ICSBEP), for use in validating calculational tools and nuclear data by criticality safety analysts. The project, named IER-554, is currently in its final design stage, following a successful preliminary design. In the work documented in the design study, ten critical configurations using Boralcan neutron absorber plates were designed, and the experiment was proven to be feasible, with a predicted low k eff uncertainty around 100 pcm. An overview of the modeled cutout of the critical assembly with a Boralcan plate is shown in Figure 1, representing one of the configurations planned for the critical experiments. Before the plates are inserted in the critical assembly, it is necessary to know more about their composition and uniformity. This summary focuses on the plate characterization plans. Each plate will undergo (1) neutron transmission measurements at different locations to determine the 10 B areal density and (2) an in-depth x-ray computed tomography (XCT) examination to obtain the exact Sizes and distribution of the B4C powder particles inside the plates. In parallel, plate modeling studies are performed with a goal to determine the validity of the currently used approximation of modeling the neutron absorber plates as a homogeneous mixture of Aluminum 1100 alloy and B4C— instead of explicitly modeling the B4C particles. By using the experimental 10 B areal density measurements, and the exact size and location of the B4C particles obtained by XCT, a plate model can theoretically be built that reproduces the plate with extremely high fidelity. The results of this modeling study could increase the confidence of the criticality safety community in its modeling methods when using this type of neutron absorber material, and the industry could use these validations to change the boron loading credit limits from the U.S. Nuclear Regulatory Commission standard review plan for dry cask storage of spent nuclear fuel. The modeling calculations are performed with SCALE 6.3.0 using the KENO V.a sequence for criticality calculations with the ENDF/B-VIII.0 continuous-energy cross section library.
During the past decade, the US Department of Energy (DOE)/National Nuclear Security Administration (NNSA) Nuclear Criticality Safety Program (NCSP) has been coordinating nuclear criticality safety (NCS) courses to provide training and qualification to new staff, supervisors, managers, regulators, and other professionals involved with NCS. To address the growing need for more NCS training possibilities, a subcritical assembly was designed at Oak Ridge National Laboratory (ORNL). The Oak Ridge Subcritical Assembly (ORSA), operated at ORNL, could be used in a new course for fissile material handlers/operators or as a backup training facility for currently existing NCSP hands-on NCS training. This paper describes some of the design steps necessary for obtaining a final ORSA design, beginning with a successful feasibility study performed in 2020. Numerous parameters within each main element of the assembly were considered, such as the reflector used, the type of fuel coating or plating used, and the number of fuel plates used. The design choices related to each parametric study described in this paper are detailed and justified at the end of each subsection. An overview of the current final design characteristics of ORSA and the experiments’ possibilities is also provided. ORSA will be built with fuel plates from legacy Aerojet General Nucleonics (AGN)-201M research reactors currently stored at the Y-12 National Security Complex (Y-12). The cylindrical fuel plates comprise UO 2 particles embedded in polyethylene and have a nominal enrichment of 19.5 ± 0.5 wt % 235 U. The basis for the final design was the feasibility study from 2020. In the feasibility study, ORSA achieved k eff = 0.95, corresponding to a multiplication factor of 20, with approximately 620 g of 235 U (four 4 cm plates, three 2 cm plates, and two 1 cm plates) and an 8.5 cm thick graphite reflector radially and on top of the assembly. The bottom of the assembly has a graphite thickness of 5 cm, and the chosen graphite density was 2.3 g/cm 3 . All design calculations were performed using SCALE 6.2.4 KENO-VI and with the ENDF/B VII.1 Continuous Energy cross-section library.
This presentation discusses the purpose of this project which is to provide thermal scattering law (TSL) and cross section data to support advanced reactor modeling and criticality safety. The presentation also examines modeling and simulations, evaluation updates, and benchmark applications in connection with the project. In summation, new and updated uranium fuel evaluations have been submitted to the ENDF/B libraries. These include vital fuel materials U-metal, UC, UN, and UO 2 .
The Chlorine Worth Study (CWS) was a series of experiments that took place at the National Criticality Experiments Research Center (NCERC), operated by Los Alamos National Laboratory (LANL). The focus of the experiments was to develop new integral benchmarks for the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook with high sensitivity to chlorine in the thermal neutron energy region and which match sensitivities of aqueous chloride operations at LANL. This work discusses the experiment and how the experimental and simulated results using different nuclear data libraries compare to each other.
The sensitivity of the eigenvalue to uncertainties in nuclear data and its evaluation are important for nuclear criticality safety. TSUNAMI-3D sequences within the SCALE code system offer several options to the user community for calculating eigenvalue sensitivity coefficients with multigroup (MG) and continuous energy (CE) 3D transport capabilities. TSUNAMI-3D sequences implement the adjoint-based perturbation theory with MG KENO code, the Contributon Linked eigenvalue sensitivity/Uncertainty estimation via Track length importance CHaracterization (CLUTCH) method with CE KENO code, and the Iterated Fission Probability (IFP) method with CE KENO and Shift codes. Each method has benefits and limitations depending on the problem that is run. The work presented here aims to adapt the CLUTCH method, which enables the Contributon method's mesh-free, memory-efficient approach for calculating adjoint-weighted tallies for sensitivity calculations, to the MG TSUNAMI-3D sequence. This application would eliminate the explicit adjoint KENO calculation, as well as the memory-consuming mesh flux moment tallies required by the conventional MG TSUNAMI-3D. Smaller memory footprints in the CLUTCH methodology and relatively shorter runtimes in MG KENO transport can make MG TSUNAMI-3D a viable method for some complex problems. Moreover, this adaptation allows MG sensitivity calculations with Shift, ORNL's next-generation high-performance Monte Carlo transport code, which currently does not offer any sensitivity capabilities with MG particle transport simulations. Initial implementation of the new MG TSUNAMI-3D sequence and its preliminary results with a selected critical benchmark experiment in the Verified, Archived Library of Inputs and Data (VALID) are presented in this study.
This presentation provides a brief recap of the ANS Summer meeting in 2018 with a discussion of the results. The presentation also provides an overview of new models and states that all new models have been checked but have not yet been added to the VALID library. It also states that the models were originally created as part of a master's thesis or summer internships. Additionally, all models have been rerun in SCALE 6.3.0 using CE ENDF/B-VIII.0 library. In conclusion, this project has facilitated a significant expansion of validation set containing gadolinium, including 13 cases previously in VALID plus 99 new cases. The completion of IPPE HST experiments confirm no clear trend as a function of concentration or spectrum. Solid absorber cases also show no clear trends and LANL HMT experiments have significant discrepancies in Gd alloy cases. While almost half of the total gadolinium-bearing cases from the ICSBEP Handbook are considered here, the presentation recognizes that there is more work to be done.
This work introduces the novel usage of pseudo-nuclides to model decay effects which are otherwise absent from simplified depletion libraries. Pseudo-nuclides are artificial nuclides which, when added to a simplified depletion library, can preserve quantities of interest such as decay energy release or decay photon activity which are otherwise significantly under-predicted by simplified libraries. Several dozen pseudo-nuclides are capable of accurately modeling decay effects of hundreds of short-lived radionuclides. The computational resources needed to model the decay effects in depletion systems with simplified depletion libraries with pseudo-nuclides are significantly less than those needed when using simplified depletion libraries without pseudo-nuclides. When compared to the similar method of decay heat precursors for a given system, pseudo-nuclides allow for smaller depletion libraries to be generated because of their ability to more accurately model the fission product irradiation effect on decay heat.