Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear depletion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Possible ozone depletions following nuclear explosions

The degree of depletion of the ozone layer ensuing after delivery of strategic nuclear warheads (5000 and 10,000 Mton) due to production of nitrogen oxides is theoretically assessed. Strong depletions are calculated for 16-km and 26-km altitudes, peaking 1-2 months after detonation and lasting for three years, while a significant depletion at 36 km would peak after one year. Assuming the explosions occur between 30 and 70 deg N, these effects should be much more pronounced in this region than over the Northern Hemisphere as a whole. It is concluded that Hampson's concern on this matter (1974) is well-founded.-

Whitten, R. C.↗
DOE OSTI2023

Evaluation of the spatial self-shielding impact for TRISO-based nuclear fuel depletion

Reactor physics analyses of nuclear cores with nuclear fuel concepts containing tristructural isotropic (TRISO) particles, such as pebbles or compact fuel elements, rely on various degrees of simplification to keep these highly heterogeneous problems computationally tractable. One such limitation regards the level of spatial discretization employed during burnup calculations, where traditionally only a limited number of spatial zones are modeled at the full core level and assume that the spectrum is constant within the fuel elements and TRISO particles in this depletion zone. This type of assumption neglects the impact of spatial self-shielding effect within the kernels (microscale level) as well as within the compact or pebbles (mesoscale level). Furthermore, the Monte Carlo code Serpent 2 contains many relevant features for efficiently modeling this type of geometry, including a collision-based domain decomposition intended for very large burnup calculations, which we leveraged for this work to quantify the impact of capturing neutron flux variations occurring at the micro- and mesoscale level on a series of high-temperature gas-cooled reactor fuel element depletion problems. While spatial self-shielding is observed at both scales, with differences from a volume-averaged burnup of ±7% within the kernels and ±2% between TRISO particles within the fuel element, the conjugated effect on nuclide inventories and multiplication factor are negligible, hence confirming that assuming a single average spectrum value may be sufficient for most applications.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Monte Carlo neutronics benchmarks on nuclear fuel depletion: A review

Monte Carlo (MC) neutronics codes are used widely for academic and industrial needs. Several schemes of coupling MC neutronics code with isotope generation and depletion code exist, which are used for performing nuclear fuel depletion simulations. These simulations can estimate the inventory of isotopes in neutron irradiated nuclear reactor fuel. However, the accuracy of these simulations shall be validated through experiments. MC codes are seldom validated by isotopic benchmarks compared to criticality benchmarks. This work compiles and analyzes the fuel depletion benchmarks and validations used to analyze the performance of MC-based fuel depletion neutronics codes. Analyses of these benchmarks and validations showed that the computed concentrations of 133 Cs, 135 Cs, 137 Cs, 148 Nd, 239 Pu, 240 Pu, and 241 Pu in the irradiated fuel by the depletion codes agreed with the measured values within 10% error. However, the computed concentrations of 125 Sb, 242 Cm, 243 Cm, 244 Cm, 245 Cm, and 246 Cm had errors more than 15% compared to the measured values. As a result, Ventina depletion code showed the most accurate predictions for the greatest number of isotope concentrations compared to ORIGEN2 and CINDER90.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Introduction of the Adding and Doubling Method for Solving Bateman Equations for Nuclear Fuel Depletion

This paper introduces and evaluates the Adding and Doubling Method (ADM) for solving the Bateman equations for depletion systems with varying numbers of nuclides and compares it to the Chebyshev Rational Approximation Method (CRAM), both implemented in the reactor physics analysis application Griffin. ADM, when applied to the Crank-Nicolson Finite Difference method, can produce results comparable in accuracy and precision to CRAM with comparable run times for systems with 35 or 297 nuclides. For systems with more than 300 nuclides, the matrix-matrix operations required by ADM are significantly more costly than the matrix-vector operations required by CRAM, making CRAM the more efficient method for systems with large numbers of nuclides. ADM is an accurate method that maintains other advantages over CRAM in that it does not depend on pre-generated coefficients or require complex number operations. ADM also manages to outperform CRAM by a factor of more than 250 in terms of run time for depletion systems that require multiple Bateman solves while the depletion matrix and time step size remain constant over all depletion intervals.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Global error analysis of the Chebyshev rational approximation method

The Chebyshev rational approximation method (CRAM) has become a widely adopted method for solving nuclear depletion problems. Therefore, understanding CRAM’s accuracy is important for the safe operation of nuclear power plants. This article performs a global error analysis of CRAM and finds that, as the length of the time step approaches zero, the relative error measured between the exact and CRAM solutions at a fixed end time approaches one and infinity for even and odd orders, respectively; for intermediate time step sizes, a minimum in relative error is observed. Finally, we show that the reason for CRAM’s behavior is that the method is inconsistent. Two best practices for using CRAM, derived from these results, are: (1) use CRAM order 16 or higher, (2) if necessary, increase the CRAM order when multiphysics coupling requires smaller time steps.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Development and verification of the pyIsoDep depletion package for nuclear thermal propulsion reactors

Nuclear thermal propulsion technology is currently being developed by the National Air and Space Administration for future manned Mars missions. There are multiple on-going activities to develop and enhance computational capabilities, single- and multi-physics, to advance the readiness level of this technology. The prediction of short-lived fission products is crucial to understand the reactivity penalty and the decay heat production during the different burnout stages of the vehicle. Generally, the solution entails coupled neutronic-depletion analysis. However, such simulations are somewhat expensive, especially if the duration of each engine burn is to be optimized. Therefore, there is a need to complement such high-fidelity techniques with time-efficient alternatives that do not require the sequential neutronic and depletion analysis. This paper details the methods and capabilities of pyIsoDep, an open-source code used for depletion analysis of nuclear thermal propulsion reactors. The package is general, in principle, and thus can be applied to any fission system, and can potentially be extended for fusion systems. The package was developed to provide a flexible and efficient alternative to pre-existing higher order depletion codes that could integrate well into mission and transient analysis of nuclear thermal propulsion reactors. Finally, this paper presents a validation and verification of pyIsoDep against analytical and Serpent-generated solutions. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

AMPX and SCALE Nuclear Data Libraries for Depletion [Slides]

This presentation touches on AMPX and SCALE nuclear data libraries for depletion. AMPX is a nuclear data processing code suite that generates continuous-energy and multigroup neutron and gamma libraries used in SCALE and VERA, covariance data used in S/U calculations, and depletion, activation and decay origin data for Oak Ridge Isotope Generation code (ORIGEN).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Plant Reload Optimization (prlo)

The PRLO framework is built on a modular and extensible architecture that tightly couples advanced evolutionary optimization algorithms with nuclear fuel depletion solvers (i.e., nuclear physics neutronics code). It supports exploring complex, high-dimensional design spaces constrained by user-specified operational, safety, and economic constraints. Objectives such as minimizing fresh fuel enrichment, flattening radial and axial power distributions, and maximizing discharge burnup are evaluated. PRLO’s equilibrium cycle optimization capability enables the identification of core configurations that maintain fuel cycle sustainability over extended planning horizons. Its integration with the RAVEN platform facilitates optimization of loading patterns or fuel shuffling schemes across multiple cycles. The interface with SIMULATE, a licensed industry-standard nodal code developed by Studsvik, ensures accurate neutronic and thermal-hydraulic feedback for reactor core design. PRLO’s automated workflow engine supports iterative design refinement, enabling utilities to streamline core design processes and meet evolving performance and regulatory targets.

Kim, Junyung [Idaho National Laboratory] (00090005↗
DOE OSTI2022

Assessing Fuel Cycle Options for Elysium Molten Chloride Salt Fast Reactor from Spent Nuclear Fuel, Plutonium, and Depleted Uranium (Final CRADA Report)

Argonne National Laboratory performed calculations in order to determine the viability of various mode of operation and operating conditions for the reactor designed by Elysium Industry. The reactor description, operating conditions, startup fuel composition, and other relevant information were provided by Elysium to Argonne. The tools currently available at Argonne were used to perform the calculations and provide an assessment for the various cases agreed upon. The results were shared with Elysium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Round-robin analysis of highly depleted lithium for Generation IV nuclear reactor applications

Lithium reference materials containing unnaturally high abundances of 7 Li are not currently available, which poses quality control problems for highly depleted lithium materials (i.e., depleted in 6 Li) required for Generation IV nuclear reactors. This study presents an interlaboratory comparison of a lithium carbonate (NIST SRM924a) containing nominally natural isotopic abundances (~92.4 % Li-7) and a highly depleted lithium hydroxide material (~99.95 % Li-7). The natural lithium isotope abundances of NIST SRM924a are confirmed, and the 6 Li/ 7 Li ratio of the lithium hydroxide ranged from 0.000399 to 0.000436 with an average of 0.000428 ± 0.000023 (2SD, n = 9). Finally, going forward this material can be used as quality control for analytical work involving highly depleted lithium.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Neutron Absorber Plate Characterization Plan for Criticality Experiments Design

After being used in nuclear installations, depleted fuel can still be highly reactive and must be handled securely to prevent any radiological or criticality concerns. In particular, spent fuel from use in nuclear power reactors must be stored and transported in specifically designed containers using neutron absorber materials to prevent criticality. Various neutron absorber material types exist and are manufactured by various entities, as thoroughly described in the Handbook of Neutron Absorber Materials for Spent Nuclear Fuel Storage and Transportation Applications written by EPRI. Presently, one of the most modern and most widely used types of neutron absorber material contains particles of boron carbide, or B 4 C, embedded in aluminum matrix: Boralcan, manufactured by Rio Tinto. It is very important for the community to know as much as possible about such neutron absorber materials. Therefore, in the recent years, a US Department of Energy National Nuclear Security Administration–Nuclear Criticality Safety Program funded project initiated design of an experiment that places Boralcan neutron-absorbing plates in an established critical assembly using low-enriched uranium fuel at the Sandia Pulsed Reactor Facility/Critical Experiments (SPRF/CX) apparatus at Sandia National Laboratories. The goal of the experiment is to produce high-quality benchmark data to submit to the International Criticality Safety Benchmark Evaluation Project (ICSBEP), for use in validating calculational tools and nuclear data by criticality safety analysts. The project, named IER-554, is currently in its final design stage, following a successful preliminary design. In the work documented in the design study, ten critical configurations using Boralcan neutron absorber plates were designed, and the experiment was proven to be feasible, with a predicted low k eff uncertainty around 100 pcm. An overview of the modeled cutout of the critical assembly with a Boralcan plate is shown in Figure 1, representing one of the configurations planned for the critical experiments. Before the plates are inserted in the critical assembly, it is necessary to know more about their composition and uniformity. This summary focuses on the plate characterization plans. Each plate will undergo (1) neutron transmission measurements at different locations to determine the 10 B areal density and (2) an in-depth x-ray computed tomography (XCT) examination to obtain the exact Sizes and distribution of the B4C powder particles inside the plates. In parallel, plate modeling studies are performed with a goal to determine the validity of the currently used approximation of modeling the neutron absorber plates as a homogeneous mixture of Aluminum 1100 alloy and B4C— instead of explicitly modeling the B4C particles. By using the experimental 10 B areal density measurements, and the exact size and location of the B4C particles obtained by XCT, a plate model can theoretically be built that reproduces the plate with extremely high fidelity. The results of this modeling study could increase the confidence of the criticality safety community in its modeling methods when using this type of neutron absorber material, and the industry could use these validations to change the boron loading credit limits from the U.S. Nuclear Regulatory Commission standard review plan for dry cask storage of spent nuclear fuel. The modeling calculations are performed with SCALE 6.3.0 using the KENO V.a sequence for criticality calculations with the ENDF/B-VIII.0 continuous-energy cross section library.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Wrapper for the optimization of cross-section generation in OpenMC

The "Wrapper for the optimization of cross-section generation in OpenMC" is Python-based software that runs the open-source Monte Carlo code OpenMC (https://docs.openmc.org/en/stable/ ) to generate cross-sections for any reactor geometry. The wrapper then optimizes those cross sections. The optimization aims to choose an energy group structure and a scattering representation that maximize accuracy with respect to continuous-energy results while avoiding significant computational expense. It then outputs these cross-sections in an ISOXML format readable by the Idaho National Lab code suite MOOSE (Olin William Calvin, Mark D DeHart, “Architecture for the Performance of Nuclear Fuel Depletion Calculations”, Idaho National Laboratory report, November 2019). The expected use-cases of this software include: -finding the best group structure and scattering representation for a specific reactor -testing the appropriateness of energy group structures for different reactor types -comparing energy group structures and scattering representations to each other -generating cross sections for use in deterministic codes, including ones found in the MOOSE suite The example reactor geometry included in this release is a generic reactor design, not based on any reactor in existence or in development. It was fabricated for the sole purpose of being a “testbed-geometry” upon which to develop this tool. Since the tool is designed to be generic, the nature of the test geometry is not very important, however, it is valuable to include as an example for users who are unfamiliar with developing reactor geometries for OpenMC.

Kreher, Miriam↗
NASA NTRS1983

Effects of core perturbations on the structure of the sun

The effects of perturbing the inner part of the solar core where the hydrogen abundance has been partially depleted by nuclear burning are investigated. Small regions are mixed within the core and the evolution of the resulting luminosity and radius perturbations is followed. The sensitivity of the solar luminosity and radius to mixing events of different sizes and at different locations in the core is determined and several relationships between the luminosity and radius perturbations are examined to see if the value of one of these perturbations can be inferred from a measurement of the other. It is found that any core perturbation which alters the hydrostatic structures will immediately affect the solar luminosity and radius. The behavior of these perturbations depends on the location of the mixing event within the core. Mixing events cannot produce the decrease in the solar radius without leading to a homogeneous evolution of the solar core and/or to a prohibitively large change in the solar luminosity.

Sweigart, A. V.↗
NASA NTRS1991

The evolution of power management architecture for missions to the outer planets

Outer planet spacecraft have unique requirements that differentiate them from inner planet and Earth orbiter spacecraft. To meet these requirements, the Voyager and Galileo Power Management And Distribution (PMAD) architectures employed shunt regulation and carried on the Mariner tradition of AC power distribution to many of the user loads. Also, autonomous fault recovery was achieved by automatic responses in hardware and software recovery routines. Finally, power distribution switching was expanded to allow for removal of the most trivial load element as the nuclear source depleted itself. The design cycle has begun for a third generation spacecraft set named Comet Rendezvous Asteroid Flyby (CRAF) and Cassini (a saturn orbiter). In their power systems, AC power distribution, relay/fuse load switching, and fault protection will give way to the advantages of DC power and solid state load switches.

Detwiler, R. C.↗
NASA NTRS1994

A search for lithium in Pleiades brown dwarf candidates using the Keck hires echelle

We report Keck Observatory high-resolution echelle spectra of lithium at 670.8 nm in two of the lowest luminosity brown dwarf candidates in the Pleiades. These objects have estimated masses of 0.055 to 0.059 solar mass from their location on a color-magnitude diagram relative to theoretical isochrones. Stellar interior models predict that Li has not burned in them. However, we find no evidence of the Li line, at limits 100 to 1000 times below the initial abundance. This indicates that Li has in fact been depleted, presumably by nuclear processing as occurs in Pleiades stars. Interior models suggest that such large Li depletion occurs only for objects with M greater than 0.09 solar mass at the age of the Pleiades. Thus, it is unlikely that the candidates are brown dwarfs. The brown dwarf candidates present a conflict: either they have masses greater than suggested from their placement on the H-R diagram, or they do have the very low suggested masses but are nonetheless capable of destroying Li, in only 70 Myr. Until this dilemma is resolved, the photometric identification of brown dwarfs will remain difficult. Resolution may reside in higher T(sub eff) derived from optical and IR colors or in lower T(sub eff) in the interior models.

Marcy, Geoffrey W.↗