Search NASA⌕ Search

SEARCH · Search NASA

Results for “OCTENES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Production of Linear Octenes from Oligomerization of 1-Butene over Carbon-Supported Cobalt Catalysts

Here, linear octenes were produced in high (70–85%) selectivity from oligomerization of liquid 1-butene using carbon-supported cobalt oxide catalysts in a continuous flow reactor. The liquid products were characterized by two-dimensional gas chromatography–mass spectrometry. Above 95% of the oligomers were C8 olefins, with the other products primarily being branched C12 olefins. The linear octene products at a conversion of 9.77% decreased in selectivity according to 3-octene > trans-2-octene > cis-2-octene > 4-octene. Methyl-heptenes including trans/cis-5-methyl-2-heptene > trans/cis-5-methyl-3-heptene > trans-3-methyl-2-heptene (at the lowest conversion) were the other major products summing to 15.6%. The selectivity of linear octenes decreased from 84 to 78% as the conversion increased from 10% to 29%. The product distribution suggests the reaction pathway involves a head-to-head coupling of two 1-butene molecules to form internal linear octenes. Head-to-tail coupling of two 1-butene molecules or a coupling between 1-butene and 2-butene forms the observed methyl-heptenes. The rate of head-to-head coupling is higher than the rate of head-to-tail or the rate of 1-butene to 2-butene coupling as indicated by the higher selectivity of linear octenes. The activated catalyst contained both Co 3 O 4 and CoO as confirmed by X-ray diffraction (XRD), in situ Raman spectroscopy, and X-ray absorption spectroscopy. The cobalt oxide particle size was estimated to be between 5 and 10 nm by high-resolution transmission electron microscopy and XRD. The Co 3 O 4 /CoO ratio decreased with increasing pretreatment temperature. Metallic cobalt, which has a low catalytic activity, formed at 550 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Catalytic Upgrading of bio-oil using 1-octene and 1-butanol over sulfonic acid resin catalysts

Raw bio-oil from fast pyrolysis of biomass must be refined before it can be used as a transporation fuel, a petroleum refinery feed or for many other fuel uses. Raw bio-oil was upgraded with the neat model olefin, 1-octene, and with 1-octene/1-butanol mixtures over sulfonic acid resin catalysts frin 80 to 150 degrees celisus in order to simultaneously lower water content and acidity and to increase hydrophobicity and heating value. Phase separation and coke formation were key factors limiting the reaction rate during upgrading with neat 1-octene although octanols were formed by 1-octene hydration along with small amounts of octyl acetates and ethers. GC-MS analysis confirmed that olefin hydration, carboxylic acid esterification, acetal formation from aldehydes and ketones and O- and C-alkylations of phenolic compounds occurred simultaneously during upgrading with 1-octene/1-butanol mixtures. Addition of 1-butanol increased olefin conversion dramatically be reducing mass transfer restraints and serving as a cosolvent or emulsifying agent. It also reacted with carboxylic acids and aldehydes/ketones to form esters, and acetals, respectively, while also serving to stabilize bio-oil during heating. 1-Butanol addition also protected the catalysts, increasing catalyst lifetime and reducing or eliminationg coking. Upgrading sharply increased ester content and decreased the amounts of levoglucosan, polyhydric alcohols and organic acids. Upgrading lowered acidity (pH value rise from 2.5 to >3.0), removed the uppleasant ordor and increased hydrocarbon solubility. Water content decreased from 37.2% to < 7.5% dramatically and calorific value increased from 12.6 MJ kg to about 30.0 MJ kg.

Zhang, Zhijun↗

Characterization of thermal destruction behavior of hybrid composites based on polyoxymethylene, ethylene-octene copolymer impact modifier and ZnO nanofiller

Hybrid polymer nanocomposites, composed of polyoxymethylene (POM), ethylene octene copolymer (EOC) and plasma synthesized tetrapod shaped zinc oxide (ZnO), were prepared by using melt compounding. The content of EOC in the POM based composites was varied between 10 and 50 mass %, while the content of ZnO was constant (2 mass %). Thermal behaviour of POM based systems was studied by using thermogravimetric analysis coupled with Fourier transform infrared spectroscopy. The influence of the elastomer content and/or ZnO addition on the thermal stability of POM based systems was evaluated. The influence of the α-octene content in the elastomer on the thermal decomposition behaviour of POM and its nanocomposites with ZnO was also evaluated. Results of thermogravimetric analysis showed that, by rising either the elastomer or ZnO content, thermal stability of the investigated POM composites was increased. The modifying effect of EOC17 in respect of thermal resistance was somewhat larger than that of EOC38 because of the smaller amount of tertiary carbon atoms in the macromolecular structure of the former elastomer. Improved thermal resistance of ZnO containing POM based composites was because of impermeable structure the inorganic nanofiller allowing decrease gas exchange rate and facilitating non-combustible gases, such as CO{sub 2}, stay in the zone of burning. Addition of ZnO have a potential to influence structure of the polymer blend matrix itself by improving its barrier characteristics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reactive Species and Reaction Pathways for the Oxidative Cleavage of 4-Octene and Oleic Acid with H 2 O 2 over Tungsten Oxide Catalysts

The oxidative cleavage of carbon-carbon double bonds (C=C) in alkenes and fatty acids produces aldehydes and acids valued as chemical intermediates. Solid tungsten oxide catalysts are low cost, non-toxic, and selective for the oxidative cleavage of C=C bonds with hydrogen peroxide (H 2 O 2 ) and are, therefore, a promising option for continuous processes. Despite the relevance of these materials, the elementary steps involved and their sensitivity to the form of W sites present on surfaces have not been described. In this work, we combine in situ spectroscopy and rate measurements to identify significant steps in the reaction, the reactive species present on catalysts, and examine differences between the kinetics of this reaction on isolated W atoms grafted to alumina and on those exposed on crystalline WO 3 nanoparticles. Raman spectroscopy shows that W-peroxo complexes (W-(η 2 -O 2 ) formed from H 2 O 2 ) react in a kinetically relevant step to produce epoxides, which undergo hydrolysis at protic surface sites. Subsequently, the CH 3 CN solvent deprotonates diols to form alpha hydroxy ketones that react to form aldehydes and water following nucleophilic attack of H 2 O 2 . Turnover rates for oxidative cleavage, determined by in situ site titrations, on WO x -Al 2 O 3 are 75% greater than those on WO 3 at standard conditions. These differences reflect activation enthalpies (ΔH ‡ ) for oxidative cleavage of 4-octene that are much lower for the isolated WO x sites (36±3 and 60±6 kJ∙mol -1 for WO x -Al 2 O 3 and WO 3 , respectively) and correlate strongly with the difference between enthalpies of adsorption for epoxyoctane (ΔH ads,epox ), which resembles the transition state for epoxidation. The WO x -Al 2 O 3 catalysts mediate oxidative cleavage of oleic acid with H 2 O 2 following a mechanism comparable to that for 4-octene. The WO 3 materials, however, form only the epoxide and do not cleave the C-C bond or produce aldehydes and acids. These differences reflect the distinct site requirements for these reaction pathways and indicate that acid sites required for diol formation are strongly inhibited by oleic acids and epoxides on WO 3 whereas the Al 2 O 3 support provides sites competent for this reaction and increase the yield of the oxidative cleavage products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Data from Reactive Species and Reaction Pathways for the Oxidative Cleavage of 4-Octene and Oleic Acid with H2O2 over Tungsten Oxide Catalysts

Oxidative cleavage of carbon–carbon double bonds (C═C) in alkenes and fatty acids produces aldehydes and acids valued as chemical intermediates. Solid tungsten oxide catalysts are low cost, nontoxic, and selective for the oxidative cleavage of C═C bonds with hydrogen peroxide (H2O2) and are, therefore, a promising option for continuous processes. Despite the relevance of these materials, the elementary steps involved and their sensitivity to the form of W sites present on surfaces have not been described. Here, we combine in situ spectroscopy and rate measurements to identify significant steps in the reaction and the reactive species present on the catalysts and examine differences between the kinetics of this reaction on isolated W atoms grafted to alumina and on those exposed on crystalline WO3 nanoparticles. Raman spectroscopy shows that W–peroxo complexes (W–(η2-O2)) formed from H2O2 react with alkenes in a kinetically relevant step to produce epoxides, which undergo hydrolysis at protic surface sites. Subsequently, the CH3CN solvent deprotonates diols to form alpha-hydroxy ketones that react to form aldehydes and water following nucleophilic attack of H2O2. Turnover rates for oxidative cleavage, determined by in situ site titrations, on WOx–Al2O3 are 75% greater than those on WO3 at standard conditions. These differences reflect the activation enthalpies (ΔH‡) for the oxidative cleavage of 4-octene that are much lower than those for the isolated WOx sites (36 ± 3 and 60 ± 6 kJ·mol–1 for WOx–Al2O3 and WO3, respectively) and correlate strongly with the difference between the enthalpies of adsorption for epoxyoctane (ΔHads,epox), which resembles the transition state for epoxidation. The WOx–Al2O3 catalysts mediate oxidative cleavage of oleic acid with H2O2 following a mechanism comparable to that for the oxidative cleavage of 4-octene. The WO3 materials, however, form only the epoxide and do not cleave the C–C bond or produce aldehydes and acids. These differences reflect the distinct site requirements for these reaction pathways and indicate that acid sites required for diol formation are strongly inhibited by oleic acids and epoxides on WO3 whereas the Al2O3 support provides sites competent for this reaction and increase the yield of the oxidative cleavage products.

Catalysis↗

Octene hydroformylation by using rhodium complexes tethered onto selectively functionalized mesoporous silica and in-situ high pressure IR study

SBA-15-based heterogeneous catalysts were applied to 1-octene hydroformylation. The turn over frequency over SBA-15/γ-aminopropylmethyldimethoxysilane(AEAPMDMS)/Rh catalyst with triphenylphosphine (TPP) ligand prepared by conventional post grafting method was higher than that of the homogeneous catalyst, (Rh(CH3COO)2)2 with TPP. The SBA-15/AEAPMDMS/Rh catalyst can be easily recycled without rhodium loss. The molar ratio of linear to branched nonyl aldehydes was remarkably enhanced over the heterogeneous catalysts. The selectively functionalized rhodium catalyst (SBA-15/Ph2Si(OEt)2/AEAPMDMS/Rh), in which rhodium was selectively tethered intra-pore of SBA-15, was beneficial for improving the selectivity to linear aldehyde. In situ high pressure FT-IR analysis suggested HRh(CO)2(PPh3)2 and HRh(CO)(PPh3)3 to be active species over the SBA-15/AEAPMDMS/Rh catalyst with TPP.

99 GENERAL AND MISCELLANEOUS↗

Cobalt Oxide on N-Doped Carbon for 1-Butene Oligomerization to Produce Linear Octenes

Cobalt oxide supported on N-doped carbon catalysts were investigated for 1-butene oligomerization. The materials were synthesized by treating activated carbon with nitric acid and subsequently with NH3 at 200, 400, 600, and 800 °C, followed by impregnation with cobalt. The 1-butene oligomerization selectivity increased with ammonia treatment temperature of the carbon support. The oligomerization selectivity of cobalt oxide on N-doped carbon synthesized at 800 °C (800A-CoOx/N-C) is 2.6 times higher than previously reported cobalt oxide on N-doped carbon synthesized with NH 4 OH (2A-CoOx/N-C). Over 70% of the butene dimers were linear C8 olefins for all catalysts. The oligomerization selectivity increased with 1-butene conversion. The catalysts were characterized by elemental analysis, N2 adsorption, X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), and X-ray photoelectron spectroscopy (XPS). The nitrogen content of the catalysts increases with ammonia treatment temperature as confirmed by elemental analysis. The surface content of pyridinic nitrogen with a binding energy of 398.4 ± 0.1 eV increased with ammonia treatment temperature as evidenced by deconvolution of N 1s XPS spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization in Ordered Polydisperse Polyolefin Diblock Copolymers

The morphologies of polydisperse ethylene-octene diblock copolymers, synthesized via a novel coordinative chain transfer polymerization process, are examined using two-dimensional synchrotron small-angle and wide-angle X-ray scattering on flow-aligned specimens. The diblock copolymers comprise one amorphous block with high 1-octene content and one semicrystalline block with relatively low 1-octene content, and each block ideally exhibits the most-probable distribution. Near-symmetric diblocks with a sufficiently large octene differential between the amorphous and semicrystalline blocks show well-ordered lamellar domain structures with long periods exceeding 100 nm. Orientation of these domain structures persists through multiple melting/recrystallization cycles, reflecting a robust structure which self-assembles in the melt. The domain spacings are nearly 3-fold larger than those in near-monodisperse polyethylene block copolymers of similar molecular weights. Although the well-ordered lamellar domain structure established in the melt is preserved in the solid state, the crystallites are isotropic in orientation. These materials display crystallization kinetics consistent with a spreading growth habit, indicating that the lamellae do not confine or template the growing crystals. The exceptionally large domain spacings and isotropic crystal growth are attributed to interblock mixing resulting from the large polydispersity; short hard blocks dissolved in the soft-block-rich domains swell the domain spacing in the melt and allow hard block crystallization to proceed across the lamellar domain interfaces.

43 PARTICLE ACCELERATORS↗

Catalytic Conversion of Model Compounds of Plastic Pyrolysis Oil over ZSM-5

Mechanistic investigation of the catalytic conversion of model compounds for plastic pyrolysis oil (1-octene, octadiene, octane, and toluene) over ZSM-5 in a fixed-bed reactor was studied. 1-Octene breaks down into smaller olefins, which undergo further cracking, oligomerization, cyclization, and hydrogen transfer to eventually produce benzene, toluene, xylene (BTX), coke, and hydrogen. The effect of contact time on 1-octene conversion was further investigated and compared with thermodynamics analyses to elucidate the reaction network. Under the reaction conditions (500 oC, 1 atm), octadiene undergoes thermal coking, significantly contributing to reactor fouling. The products from octane cracking are similar to the products from 1-octene conversion whereas toluene undergoes disproportionation, dealkylation and coking. The analysis of spent catalyst showed long-chain hydrocarbons created by oligomerization reactions filled the pores and covered the surface of the catalyst. As a result, when mesoporous ZSM-5 is used instead of conventional, product selectivity is maintained for 70 hours in time-on-stream experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distinctive Stereochemically Linked Cooperative Effects in Bimetallic Titanium Olefin Polymerization Catalysts

The complex (μ-Me 2 C-3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si-( t BuN)](TiMe 2 )} 2 (3) was prepared as a new binuclear catalyst motif for homogeneous olefin polymerization. Complex 3 exists as rac-3 and meso-3 diastereomers, which can be separated and characterized by solution NMR spectroscopy and single-crystal X-ray diffraction. While meso-3 has high thermal stability, rac-3 undergoes thermolysis in solution to quantitatively form the dimeric methylidene complex (μ-Me 2 C-3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)][(μ-CH 2 )Ti]}2 (rac-4). Activation of rac-3 and meso-3 with 1 equiv of Ph 3 C + B(C 6 F 5 ) 4 – yields [(μ-CMe 2 -3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)]} 2 (μ-CH 2 )(μ-CH 3 )Ti 2 ] + B(C 6 F 5 ) 4 – (5; rac-5 and meso-5, respectively). Interestingly, meso-5 is stable in the presence of an additional 1 equiv of Ph 3 C + B(C 6 F 5 ) 4 –, while rac-5 reacts to yield rac-[(μ-CMe2-3,3'){(η5-cyclopentadienyl)[1-Me2Si(tBuN)]}2(μ-CH2)[(TiCH3)(Ti-η1-Ph3C)]2+[B(C6F5)4–]2 (rac-6) as indicated by multinuclear NMR spectroscopy and DFT computation. meso-3 reacts with 2 equiv of B(C 6 F 5 ) 3 to yield meso-[(μ-CMe 2 -3,3'){(η 5 -cyclopentadienyl)[1-Me 2 Si( t BuN)]} 2 (μ-CH 2 )(μ-CH 3 )Ti 2 ]+MeB(C 6 F 5 ) 3 – (meso-7) containing the same meso-5 cation but with a MeB(C 6 F 5 ) 3 –counteranion. These findings, along with catalytic results, indicate that rac-3 and meso-3 remain structurally intact during polymerization, consistent with the observed diastereoselectivity effects. Under identical ethylene/1-octene copolymerization conditions, only activated bimetallic rac-3 produces appreciable polymer, with meso-3 exhibiting low activity, but both yield polymer with a branch density >2× that of the monometallic control [(3- t Bu-C 5 H 3 )SiMe 2 N t Bu]TiMe 2 (Ti 1 ). In ethylene/styrene copolymerizations, rac-3 produces polymers with 3.1× higher M n and 2.1× greater styrene incorporation versus Ti 1 , while meso-3 catalyzes only ethylene-free styrene homopolymerization. In 1-octene homopolymerizations, meso-3 + B(C 6 F 5 ) 3 (i.e., meso-7) produces highly isotactic poly-1-octene (mmmm 91.7%), while rac-3 + Ph 3 C + B(C 6 F 5 ) 4 – (i.e., rac-5), rac-3 + B(C 6 F 5 ) 3 (i.e., rac-7), and meso-3 + Ph 3 C + B(C 6 F 5 ) 4 – (i.e., meso-5) produce only atactic poly-1-octene. In conclusion, these bimetallic polymerization catalysts exhibit distinctive cooperative effects influencing product M n , tacticity, and comonomer selection, demonstrating that binuclear catalyst stereochemical factors are significant.

36 MATERIALS SCIENCE↗

Surface vs Homogeneous Organo-Hafnium Catalyst Ion-Pairing and Ligand Effects on Ethylene Homo- and Copolymerizations

Heterogeneous catalysts have long dominated polyethylene and polypropylene production, but understanding their catalysis is challenged by uncertainties in active site structures and percentages. Surface-bound organometallic catalysts are an emerging strategy to combine successful homogeneous catalysts having well-understood structures, relatively high percentages of active sites, and exceptional control of selectivity, with the attractions of surface catalysts, to transition promising homogeneous systems to large-scale heterogeneous ones. Nevertheless, surface-bound olefin polymerization catalysts typically produce ultrahigh M w ’s but with low activity and comonomer selectivity. Here, we report the systematic synthesis and characterization of a series of pyridylamido–Hf complexes and their corresponding surface catalysts chemisorbed on sulfated alumina (AlS) and zirconia (ZrS). Comparative ethylene homo- and 1-octene copolymerizations reveal similar activity and 1-octene selectivity trends in the homogeneous and heterogeneous systems. For the surface pyridylamido–Hf catalyst series, large variations in activity (up to 10×) and 1-octene incorporation (up to 28×) are achieved by ligand and support manipulation. Interestingly, while the homogeneous catalysts exhibit positive comonomer effects in ethylene/1-octene copolymerization, the surface catalysts behave oppositely. Extended X-ray absorption fine structure (EXAFS) reveals significantly elongated Hf···O bond distances vs typical Hf–O covalent bonds (2.06 vs 1.97 Å). Furthermore, density functional theory (DFT) analysis of the heterolytic ion pair separation enthalpies, olefin insertion energetics, and NBO/Bader charges also suggest electrostatic Hf cation–anionic support binding and catalytic patterns, which are modulated by the ion-pairing energetics and ligand architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Melt and Solid-State Structures of Polydisperse Polyolefin Multiblock Copolymers

Crystallization in polydisperse ethylene-octene multiblock copolymers, polymerized via chain shuttling chemistry, is examined using two-dimensional synchrotron small- and wide-angle X-ray scattering on flow-aligned specimens. The multiblocks are composed of alternating crystalline (hard) blocks of low 1-octene content and amorphous (soft) blocks of high 1-octene content; the block lengths and the number of blocks per chain are characterized by most-probable distributions. These polymers self-assemble into lamellar domain morphologies in the melt, and the melt morphology is retained in the solid state. Despite extensive mixing between hard and soft blocks, the high crystallinity (>50%) of the hard blocks leads to an alignment of the crystallites within the domain structure, with the orthorhombic polyethylene c-axis generally perpendicular to the lamellar domain normal. The interlamellar domain spacings exhibited by the multiblocks, which exceed 100 nm, are estimated to be 5 times larger than those in near-monodisperse block copolymers having a similar chemical composition and a number-average molecular weight equivalent to the multiblock's 'constituent diblock' repeating unit. This swelling factor exceeds the value of 3 previously reported for analogous polydisperse olefin diblock copolymers, due to the lower segregation strength and enhanced phase mixing of the multiblocks studied here.

36 MATERIALS SCIENCE↗

Force-Modulated Selectivity of the Rhodium-Catalyzed Hydroformylation of 1-Alkenes

Here we quantify the regio- chemo-, and enantioselectivity of the hydroformylation of 1-alkenes catalyzed by Rh(I) complexes containing chiral macrocyclic biaryl bis(phosphine) ligands as a function of mechanical force applied to the biaryl backbone of these ligands. Extension forces increase the regioselectivity of the hydroformylation of 1-octene from l:b = 1.2 to 1.9 and decrease the chemoselectivity for C 9 aldehyde relative to 2-octene from 96% to 20% across a ~230 pN change in applied force. Extension forces decrease the enantioselectivity of the hydroformylation of styrene from 28% to 18% ee across a similar force range. Variable temperature 1 H and 31 P NMR analysis of five-coordinate rhodium complexes of the form (P–P)Rh(CO) 2 H established structures in which the bisphosphine ligand occupies one equatorial and one apical position in the trigonal bipyramid with rapid interconversion of the equatorial and apical phosphorus atoms ($ΔG^‡_{223 \text{K}}$ = 9.6–9.9 kcal/mol). Neither the isomeric composition nor fluxional behavior of these complexes was detectably perturbed across a ~300 pN change in applied force.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dimerization of Linear Butenes on Zeolite-Supported Ni 2+

Nickel- and alkali-earth-modified LTA based zeolites catalyze the dimerization of 1-butene in the absence of Bronsted acid sites. The catalyst reaches over 95% selectivity to n-octenes and methylheptenes. The ratio of these two dimers is markedly influenced by the parallel isomerization of 1-butene to 2-butene, shifting the methylheptene/octene ratio from 0.7 to 1.4 as the conversion increases to 35%. At this conversion, the thermodynamic equilibrium of 90% cis- and trans-2-butenes is reached. Conversion of 2-butene results in methylheptene and dimethylhexene with rates that are 1 order of magnitude lower than those with 1-butene. The catalyst is deactivated rapidly by strongly adsorbed products in the presence of 2-butene. The presence of pi-allyl-bound butene and Ni-alkyl intermediates was observed by IR spectroscopy, suggesting both to be reaction intermediates in isomerization and dimerization. Product distribution and apparent activation barriers suggest 1-butene dimerization to occur via a 1'-adsorption of the first butene molecule and a subsequent 1'- or 2'-insertion of the second butene to form octene and methylheptene, respectively. The reaction order of 2 for 1-butene and its high surface coverage suggest that the rate-determining step involves two wealdy adsorbed butene molecules in addition to the more strongly held butene.

Ehrmaier, Andreas↗