Search NASA⌕ Search

SEARCH · Search NASA

Results for “OI”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Structural, Electrical, and Electromechanical Properties of Inverse Hybrid Perovskites from First-Principles: The Case of (CH 3 NH 3 ) 3 OI

Inverse-hybrid perovskites (IHPs) with large polarization have recently been predicted from first-principles computations. Here, we use one representative from the IHP class of materials, (CH 3 NH 3 ) 3 OI (MA3OI), to propose a route to the first-principles prediction of structural and electrical properties, such as polarization, polarization reversibility, and the associated coercive field for hybrid organic–inorganic perovskites. The route relies on the construction of the polarization reversal path that models experimental measurements. Such a path was found to play an important role in the ground-state search as well as in the identification of competing structural variations. The latter is believed to be the origin of the structural disorder that is characteristic of hybrid organic–inorganic perovskites. The application of such an approach to MA3OI leads to the prediction of several structural variations that are expected to result in a structurally disordered phase above 766 K and of the polar ground state with a polarization of 25.3 μC/cm 2 that is reversible with the application of an electric field. The upper estimate for the coercive field associated with homogeneous polarization reversal is 6.9 GV/m. The piezoelectric constants of MA3OI are predicted to be an order of magnitude smaller in comparison with a prototypical inorganic ferroelectric PbTiO 3 ; however, the low symmetry of the MA3OI structure yields finite values for all components of the piezoelectric tensor. The polarization in MA3OI is tunable by the epitaxial strain (11.5% change under 5% epitaxial strain), although less so as compared with PbTiO 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Throughfall-Reduction Drying Effects on Forest Floor Plant Tissue Biomass (Oi+Oe soil horizons) and Moisture Content in Four Lowland Panamanian Forests

Objectives: Climatic drying is predicted for many tropical forests, yet effects on soil properties across moisture and soil gradients within tropical forests remain poorly characterized, hampering predictions of forest-climate feedbacks. We hypothesized that drying would suppress soil CO2 fluxes (i.e., respiration) in already-drier tropical forests by further reductions in soil moisture, but increases CO2 fluxes in wetter tropical forests by alleviating anaerobiosis and soil saturation. We measured soil CO2 fluxes, soil moisture, soil temperature, and forest floor biomass during wet-dry cycles (2015 – 2022) in four Panamanian forests that vary in rainfall and soil fertility. We also surveyed all tree species and identified to species in 2018 and 2019.Results: We found that soil moisture peaked in the wet season and declined in the dry season. Measured soil CO2 fluxes declined in the dry season and peaked in the early wet season ahead of peak soil moisture, resulting in a lower soil moisture optimum for respiration than previously modeled. Forest floor biomass peaked in the dry season, in contrast. Chronic throughfall exclusion also suppressed soil moisture across the four forests to 20cm depths, and also initially suppressed soil CO2 fluxes across forests. There was sustained suppression of soil CO2 fluxes after four years in the wettest forest only (-28 ± 4% during the dry season), but elevated soil CO2 fluxes in a fertile forest after four years (+75 ± 28% during the late wet season). The unexpected negative drying effect in the wettest, most infertile forest could have resulted from reduced vertical flushing of nutrients into soils, as the drying effect increased with time. Including hydro-nutrient interactions in ecosystem models could improve predictions of tropical forest-climate feedbacks (results presented in Cusack et al. 2023). Datasets included: Datasets included here include .csv and .xls files for forest floor biomass (equivalent to the Oi+Oe soil horizons), and a subset include forest floor biomass moisture content (weight/weight) in the study plots. There is also a .kml file that includes coordinates for all 32 plots included in the study of four forests (n = 4 throughfall reduction and n = 4 control plots per site). No special software is needed to open these files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Development of a Supercharged Octane Number and a Supercharged Octane Index

Gasoline knock resistance is characterized by the Research and Motor Octane Number (RON and MON), which are rated on the CFR octane rating engine at naturally aspirated conditions. However, modern automotive downsized boosted spark ignition (SI) engines generally operate at higher cylinder pressures and lower temperatures relative to the RON and MON tests. Using the naturally aspirated RON and MON ratings, the octane index (OI) characterizes the knock resistance of gasolines under boosted operation by linearly extrapolating into boosted “beyond RON” conditions via RON, MON, and a linear regression K factor. Using OI solely based on naturally aspirated RON and MON tests to extrapolate into boosted conditions can lead to significant errors in predicting boosted knock resistance between gasolines due to non-linear changes in autoignition and knocking characteristics with increasing pressure conditions. Here, a new “Supercharged Octane Number” (SON) method was developed on the CFR engine at increased intake pressures, which improved the correlation to boosted knock-limited automotive SI engine data over RON for several surrogate fuels and gasolines, including five “Co-Optima” RON 98 fuels and an E10 regular grade gasoline. Furthermore, the conventional OI was extended to a newly introduced Supercharged Octane Index (OI S ) based on SON and RON, which significantly improved the correlation to fuel knock resistance measurements from modern boosted SI engine knock-limited spark advance tests. This demonstrated the first proof of concept of a SON and OI S to better characterize a fuel’s knock resistance in modern boosted SI engines.

42 ENGINEERING↗
DOE OSTI2021

Octane Index Applicability over the Pressure-Temperature Domain

Modern boosted spark-ignition (SI) engines and emerging advanced compression ignition (ACI) engines operate under conditions that deviate substantially from the conditions of conventional autoignition metrics, namely the research and motor octane numbers (RON and MON). The octane index (OI) is an emerging autoignition metric based on RON and MON which was developed to better describe fuel knock resistance over a broader range of engine conditions. Prior research at Oak Ridge National Laboratory (ORNL) identified that OI performs reasonably well under stoichiometric boosted conditions, but inconsistencies exist in the ability of OI to predict autoignition behavior under ACI strategies. Instead, the autoignition behavior under ACI operation was found to correlate more closely to fuel composition, suggesting fuel chemistry differences that are insensitive to the conditions of the RON and MON tests may become the dominant factor under these high efficiency operating conditions. This investigation builds on earlier work to study autoignition behavior over six pressure-temperature (PT) trajectories that correspond to a wide range of operating conditions, including boosted SI operation, partial fuel stratification (PFS), and spark-assisted compression ignition (SACI). A total of 12 different fuels were investigated, including the Co-Optima core fuels and five fuels that represent refinery-relevant blending streams. It was found that, for the ACI operating modes investigated here, the low temperature reactions dominate reactivity, similar to boosted SI operating conditions because their PT trajectories lay close to the RON trajectory. Additionally, the OI metric was found to adequately predict autoignition resistance over the PT domain, for the ACI conditions investigated here, and for fuels from different chemical families. This finding is in contrast with the prior study using a different type of ACI operation with different thermodynamic conditions, specifically a significantly higher temperature at the start of compression, illustrating that fuel response depends highly on the ACI strategy being used.

02 PETROLEUM↗
DOE OSTI2025

Effect of bisphosphonate treatment on the oim mouse middle ear ossicles' structure, composition and hearing

Hearing loss is common in people with osteogenesis imperfecta (OI or brittle bone disease). Bisphosphonates are commonly used to treat long bone fragility in children with OI. However, its impact on the bone quality of the middle ear ossicles and hearing remains unknown. This study determines whether bisphosphonates treatment itself may contribute to hearing loss in OI by evaluating its effects in the oim/oim mouse model of severe OI having normal auditory function. Specifically, this study reports the effects of alendronate (ALN), a nitrogen-containing bisphosphonate, on ossicle morphology, porosity, and elemental composition in 14-week-old oim/oim mice treated weekly, starting at 2 weeks of age. The ossicles were examined using synchrotron microtomography and X-ray fluorescence microscopy (XFM). Hearing was assessed longitudinally until 26 weeks of age by determining auditory brainstem response (ABR) thresholds in another group of mice also treated weekly starting at 2 weeks of age. ALN treatment further reduces in size the already small oim/oim ossicles, specifically in female mice. Porosity, bone composition, and hearing function, however, were generally not affected by the ALN treatment. Furthermore, ALN does not prevent joint fusions, excessive bone formations, or enlarged joint spaces in WT or oim/oim experimental groups. One ALN-treated oim/oim mouse with a bone formation in the interior of the footplate, and one ALN-treated WT mouse with a fixed footplate had frequency-specific hearing loss. Since footplate abnormalities are not observed in PBS-treated mice in this study, it remains unclear whether ALN fails to prevent these changes or contributes to their development. Future studies should investigate the mechanisms of ossicular abnormalities and bisphosphonates modulatory role in the ossicles.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Role of different organic and inorganic amendments in the biofortification of iodine in Coriandrum sativum crop

Iodine deficiency disorder (IDDs) is one of the most prevailing and common health issues in mountainous communities. An effective way to control the prevalence and emergence of IDDs in remote areas is to use iodized salt. However, recent studies indicated that iodized salt is mostly lost during the cooking process. The current study of iodine biofortification differed from the previous studies in two main aspects: it involved exogenous organic iodine (OI), and inorganic iodine such as potassium iodide (KI), added in the amended soils, which previous studies did not consider. Moreover, the translocation, transformation, and distribution of iodine from soil to plants are poorly understood in amended soil. Thus, identifying an effective management option to enhance iodine (I) bioavailability in nutrient-deficient soils is currently a significant challenge. Therefore, a greenhouse study was conducted to investigate the effects of organic and inorganic soil amendments on the uptake of different iodine sources in coriander crops. Results showed that applying an inorganic iodine source significantly enhanced the iodine edible part of the crop compared to the control ( p < 0.05). The application of soil amendments relatively improved iodine uptake by the coriander crop compared to the control. The highest iodine was found in crop tissues grown in wood ash-amended soil supplemented with KI (291.97 μg kg −1 ). The KI uptake was significantly higher than the OI ( p < 0.05). Compared to OI, a higher translocation factor (0.96) and distribution coefficient (3.51) were found for plants treated with KI. Thus, this study indicates that a suitable soil amendment can be a better option for iodine biofortification and that it can serve as an alternative to iodized salt in preventing IDDs.

Tianyi, Yan↗
DOE OSTI2025

Photocarrier dynamics at the interface between WS 2 and ozone-irradiated graphene

We investigate the photocarrier properties of heterostructures (HSs) formed by WS 2 and ozone-irradiated graphene (OI-graphene), with a focus on the impact of ozone irradiation. Photoluminescence and Raman spectroscopy reveal a pronounced doping effect induced by ozone irradiation on the graphene layer. Transient absorption measurements demonstrate a substantial suppression of charge transfer efficiency across the interface in the presence of ozone molecules. Spatially resolved pump-probe measurements further show a significant reduction in the diffusion coefficient of photocarriers in WS 2 on OI-graphene compared to that of individual WS 2 monolayers. The slower diffusion suggests enhanced spatial separation of electrons and holes in the WS 2 layer, induced by a built-in electric field at the interface. This effect arises from the combined influences of doping and dielectric property changes caused by ozone molecules. These findings highlight the critical influence of ozone irradiation on graphene and HS interfaces, offering valuable insights for the design of future graphene-based two-dimensional HSs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Improving tide-estuary representation in MPAS-Ocean (Final Report)

The overarching goal of this research is to produce a skill-assessed tide-estuary representation, including BGC (biogeochemistry) components of the ecosystem, into the MPAS-O global climate modeling system. Specifically, in the original proposal we proposed one-way nesting, into global MPAS-O, of a high-resolution model for TES (tidal and estuary systems) including the coupling of the BGC components. We have completed the proposed tasks during the past 4 years. Specifically, after extensive consultation with the MPAS-O group during the first year, we have decided to go beyond the original proposal and to two-way nest SCHISM into MPAS-O. As a result, SCHISM-CoSiNE (with CoSiNE being the BGC model) is now fully integrated into MPAS-O as a subroutine (more precisely, an analysis member) and can be invoked as MPAS-O is running with two-way exchange of information between the TES and global models (with proper spatial interpolation done on the fly). As originally proposed, we have also developed the new finite-volume (FV) model MPAS-OI (aka ELCIRC-sub) for TES. We have conducted several tests using the coupled MPAS-SCHISM- CoSiNE model and also MPAS-OI for Columbia River, San Francisco Bay and Chesapeake Bay. Four journal publications have been produced so far as the result of the project and 1 is under review (cf. Publication section). With these achievements, we will be ready to conduct fully coupled simulations of TES and global ocean anywhere, as soon as some missing capabilities in MPAS-O (e.g. tides, improved ability to handle the boundary conditions, and streamlining of the global BGC model) are worked out. The significance of the outcome of this project cannot be overstated. It marks the first time, as far as we know, that a global climate model is tightly coupled to a bona fide nearshore and terrestrial model (SCHISM system); in fact SCHISM is the first bona fide compound flooding model that seamlessly covers the coastal ocean, estuaries, rivers and watersheds (Ye et al. 2020; Zhang et al. 2020). The coupled model will reduce the errors and uncertainties of the MPAS-O global climate model system. It also complements and extends on-going E3SM project, as the latter seeks in the long-term to include components required to simulate impacts of sea-level change and storm surge on coastal regions, including wave models and focusing resolution in coastal and storm-track regions, as an important component of the Cryosphere-ocean system. Note that a spectral wave model (the unstructured-grid version of Wave Watch III, aka Wind Wave Model) is already incorporated inside the SCHISM system and is therefore directly accessible in the coupled system.

58 GEOSCIENCES↗
DOE OSTI2022

Comparative Genomics Applied to Systematically Assess Pathogenicity Potential in Shiga Toxin-Producing Escherichia coli O145:H28

Shiga toxin-producing Escherichia coli (STEC) O145:H28 can cause severe disease in humans and is a predominant serotype in STEC O145 environmental isolates. Here, comparative genomics was applied to a set of clinical and environmental strains to systematically evaluate the pathogenicity potential in environmental strains. While the core genes-based tree separated all O145:H28 strains from the non O145:H28 reference strains, it failed to segregate environmental strains from the clinical. In contrast, the accessory genes-based tree placed all clinical strains in the same clade regardless of their genotypes or serotypes, apart from the environmental strains. Loss-of-function mutations were common in the virulence genes examined, with a high frequency in genes related to adherence, autotransporters, and the type three secretion system. Distinct differences in pathogenicity islands LEE, OI-122, and OI-57, the acid fitness island, and the tellurite resistance island were detected between the O145:H28 and reference strains. A great amount of genetic variation was detected in O145:H28, which was mainly attributed to deletions, insertions, and gene acquisition at several chromosomal “hot spots”. Finally, our study demonstrated a distinct virulence gene repertoire among the STEC O145:H28 strains originating from the same geographical region and revealed unforeseen contributions of loss-of-function mutations to virulence evolution and genetic diversification in STEC.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

On the mechanism of radiation and thermal-induced degradation of the insulation cables in nuclear power plants-the presence of long-lived polyenyl C-centered radicals

Radiolytically and thermally produced long-lived polyenyl C-centered radicals in the nuclear power plants’ insulation cables are detected and measured after more than 45 months of aging since the irradiation and the thermal treatment. Electron Paramagnetic Resonance (EPR) results of the irradiated Cross-linked Polyethylene (XLPE) and Ethylene Propylene Rubber (EthProRu), used as primary insulation materials at Nuclear Power Plants (NPP), clearly demonstrate the presence of polyenyl radicals along with allyl and peroxyl radicals. The yields of these free radicals are dose-rate dependent. EPR results also show the presence of the long-lived polyenyl along with allyl and peroxyl free radicals in the thermally treated XLPE, and EthProRu. These free radicals can cause a major failure in the performance of these cables in NPPs. Besides, the results showed the enhancement in the oxidation reactions due to the migration of copper ions from the conductor to the bulk of the insulation. Further, this study also shows that the oxidation index (OI) and Elongation at Break (EAB) increases and decreases respectively at higher doses and temperatures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Generation of Subauroral Longitudinally Extended Emissions Following Intensifications of the Poleward Boundary of the Substorm Bulge and Streamer Production

Observations showing the development of Subauroral Longitudinally Extended Emigerssions on a global scale are presented. It is demonstrated that they occur as a separation of an east-west arc-like band of luminosity that detaches away from the equatorward edge of the auroral distribution following episodes of auroral streamer production. They persist for time intervals on the order of ~30 min and devolve into patchy disjointed segments before they fade. Emissions are seen in both 557.7 nm OI and 391.4 nm N + 2 1NG lines, and 630.0 nm emissions are often observed equatorward. The 391.4 nm emissions are typically weaker and fade away more quickly than the 557.7 nm emissions, suggesting that an auroral precipitation source is initially present but is rapidly depleted as the forms age. All cases are associated with enhanced Subauroral Polarization Stream (SAPS) flows, and one event shows clear association with large-scale Giant Undulations (GUs) and the formation of spur-like forms that fold equatorward under the main oval. A model is proposed for the production of subauroral longitudinally extended forms in which nonlinear growth of SAPS-induced surface waves on the plasmapause results in a disruption of the boundary. It is suggested that hot plasma of plasma sheet origin becomes entrained in the plasmasphere to produce transient precipitation-associated auroral emissions that may decay into STEVE emissions and that cold dense plasma from the plasmasphere becomes entrained onto open drift paths to feed long-lived drainage plumes. This process may occur quasi periodically during intense substorms and storm-time conditions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Clonality, local population structure, and gametophyte sex ratios in cryptic species of the Sphagnum magellanicum complex

Sphagnum (peatmoss) comprises a moss (Bryophyta) clade with approximately 300-500 species. The genus has unparalleled ecological importance because Sphagnum-dominated peatlands store almost a third of the terrestrial carbon pool and peatmosses engineer the formation and microtopography of peatlands. Genomic resources for Sphagnum are being actively expanded, but many aspects of their biology are still poorly known. Among these are the degree to which Sphagnum species reproduce asexually, and the relative frequencies of male and female gametophytes in these haploid-dominant plants. Here, we assess clonality and gametophyte sex ratios and test hypotheses about the local-scale distribution of clones and sexes in four North American species of the S. magellanicum complex. These four species are difficult to distinguish morphologically and are very closely related. We also assess microbial communities associated with Sphagnum host plant clones and sexes at two sites. 405 samples of the four species, representing 57 populations, were subjected to RADseq. Analyses of population structure and clonality based on the molecular data utilized both phylogenetic and phenetic approaches. Multi-locus genotypes (genets) were identified using the RADseq data. Sexes of sampled ramets were determined using a molecular approach that utilized coverage of loci on the sex chromosomes after the method was validated using a sample of plants that expressed sex phenotypically. Sex ratios were estimated for each species, and populations within species. Differences in fitness between genets was estimated as the numbers of ramets each genet comprised. Degree of clonality (numbers of genets/numbers of ramets [samples]) within species, among sites, and between gametophyte sexes were estimated. Sex ratios were estimated for each species, and populations within species. Sphagnum-associated microbial communities were assessed at two sites in relation to Sphagnum clonality and sex. All four species appear to engage in a mixture of sexual and asexual (clonal) reproduction. A single ramet represents most genets but 2-8 ramets were detected for some genets. Only one genet is represented by ramets in multiple populations; all other genets are restricted to a single population. Within populations ramets of individual genets are spatially clustered, suggesting limited dispersal even within peatlands. Sex ratios are male-biased in S. diabolicum but female-biased in the other three species, although significantly so only in S. divinum. Neither species nor males/females differ in levels of clonal propagation. At St. Regis Lake (NY) and Franklin Bog (VT), microbial community composition is strongly differentiated between the sites, but differences between species, genets, and sexes were not detected. Within S. divinum, however, female gametophytes harbored 2-3 times the number oi of microbial taxa as males. These four Sphagnum species all exhibit a similar reproductive patterns that result from a mixture of sexual and asexual reproduction. The spatial patterns of clonally replicated ramets of genets suggest that these species fall between the so-called phalanx patterns where genets abut one another but do not extensively mix, because of limited ramet fragmentation, and the guerrilla patterns where extensive genet fragmentation and dispersal results in greater mixing of different genets. Although sex ratios in bryophytes are most often female-biased, both male and female biases occur in this complex of closely related species. The association of far greater microbial diversity for female gametophytes in S. divinum, which has a female-biased sex ratio, suggests additional research to determine if levels of microbial diversity are consistently correlated with differing patterns of sex ratio biases.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Numerical Analysis of Fuel Effects on Advanced Compression Ignition Using a Cooperative Fuel Research Engine Computational Fluid Dynamics Model

Growing environmental concerns and demand for a better fuel economy are driving forces that motivate the research for more advanced engines. Multi-mode combustion strategies have gained attention for their potential to provide high thermal efficiency and low emissions for light-duty applications. These strategies target optimizing the engine performance by correlating different combustion modes to load operating conditions. The extension from boosted spark ignition (SI) mode at high loads to advanced compression ignition (ACI) mode at low loads can be achieved by increasing the compression ratio and utilizing intake air heating. Further, in order to enable an accurate control of intake charge condition for ACI mode and rapid mode-switches, it is essential to gain fundamental insights into the autoignition process. Within the scope of ACI, homogeneous charge compression ignition (HCCI) mode is of significant interest. It is known for its potential benefits, operation at low fuel consumption, low NOx, and particulate matter (PM) emissions. In the present work, a virtual Cooperative Fuel Research (CFR) engine model is used to analyze fuel effects on ACI combustion. In particular, the effect of fuel octane sensitivity (S) (at constant Research Octane Number (RON)) on autoignition propensity is assessed under beyond-RON (BRON) and beyond-MON (BMON) ACI conditions. The three-dimensional CFR engine computational fluid dynamics (CFD) model employs a finite-rate chemistry approach with a multi-zone binning strategy to capture autoignition. Two binary blends with Research Octane Number (RON) of 90 are chosen for this study: primary reference fuel (PRF) with S = 0 and toluene–heptane (TH) blend with S = 10.8, representing paraffinic and aromatic gasoline surrogates. Reduced mechanisms for these blends are generated from a detailed gasoline surrogate kinetic mechanism. Simulation results with the reduced mechanisms are validated against experimental data from an in-house CFR engine, with respect to in-cylinder pressure, heat release rate, and combustion phasing. Thereafter, the sensitivity of combustion behavior to ACI operating condition (BRON versus BMON), air-fuel ratio (λ = 2 and 3), and engine speed (600 and 900 rpm) is analyzed for both fuels. It is shown that the sensitivity of a fuel’s autoignition characteristics to λ and engine speed significantly differs at BRON and BMON conditions. Moreover, this sensitivity is found to vary among fuels, despite the same RON. It is also observed that the presence of low-temperature heat release (LTHR) under BRON condition leads to more sequential autoignition and longer combustion duration than BMON condition. Finally, the study indicates that the octane index (OI) fails to capture the trend in the variation of autoignition propensity with S under the BMON condition.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Upward propagation of gigantic jets revealed by 3D radio and optical mapping

Occasionally, lightning will exit the top of a thunderstorm and connect to the lower edge of space, forming a gigantic jet. Here, we report on observations of a negative gigantic jet that transferred an extraordinary amount of charge between the troposphere and ionosphere (~300 C). It occurred in unusual circumstances, emerging from an area of weak convection. As the discharge ascended from the cloud top, tens of very high frequency (VHF) radio sources were detected from 22 to 45 km altitude, while simultaneous optical emissions (777.4 nm OI emitted from lightning leaders) remained near cloud top (15 to 20 km altitude). This implies that the high-altitude VHF sources were produced by streamers and the streamer discharge activity can extend all the way from near cloud top to the ionosphere. The simultaneous three-dimensional radio and optical data indicate that VHF lightning networks detect emissions from streamer corona rather than the leader channel, which has broad implications to lightning physics beyond that of gigantic jets.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Rethinking PCMI Failures Under Transient Conditions

Under PCMI conditions, the cladding strain is driven by either pellet swelling during normal operation or pellet thermal expansion in transients. The loading in PCMI is displacement controlled because friction between the pellet and the cladding results in a strain compatibility at the pellet/cladding interface. Failure is known to occur under PCMI loading conditions during operation when normal power changes result in release of iodine (and other fission products) causing stress corrosion cracking where the crack-propagation rate is dependent upon the cladding stress but slow relative to strictly mechanical failures. Failures after normal power changes are often referred to as failure by pellet-cladding interaction or PCI to distinguish it from PCMI. Such failures are considered displacement-controlled failures, as noted above, and occur with limited plastic strain. This is different to what is typically thought of as PCMI failure under transient conditions, either Anticipated Operational Occurrences (AOOs) or Reactivity Insertion Accidents (RIAs), which is generally assumed to occur once the cladding reaches a mechanical strain limit. But there are two features in the typical PCMI failure in an RIA that are not consistent with the PCMI assumptions. The first is the ductile shear failure feature in cross section and the second is a large crack opening post failure (e.g., see OI-11 failure in NSRR program). The ductile feature is indicative of a plastic instability that requires very large local strains, and the large crack opening must be the result of a release of energy, both of which are not expected if stress in the cladding was only driven by thermal expansion in the pellet. It is concluded that there must be a mechanism (likely related to rod internal pressure) that eliminates strain compatibility between the pellet and cladding – allowing strain localization to occur in what are known as PCMI transient failures. In some sense, these PCMI failures may actually be early burst failures that occur when thermal expansion causes uniform strains greater than a defined limit and fission gas pressure eliminate the strain compatibility

Cantonwine, Paul↗
DOE OSTI2021

Room temperature plasma-etching and surface passivation of far-ultraviolet Al mirrors using electron beam generated plasmas

The development of optical systems operating in the far ultraviolet range (FUV, λ=100-200 nm) is limited by the efficiency of passivated aluminum (Al) mirrors. Although it is presently possible to obtain high-reflectivity FUV mirrors through physical vapor deposition, the process involves deposition with substrates at high temperatures, which is technically challenging for large optical elements. A novel passivation procedure for bare Al mirrors is reported. The treatment consisted of using a low-temperature electron-beam generated plasma produced in a gas mixture of Ar and SF6 to etch away the native oxide layer from the Al film, while simultaneously promoting the generation of a thin aluminum tri-fluoride (AlF3) layer on the Al surface. In the first section we analyze the effect of varying both ion energy and SF6 concentration on the FUV reflectance, thickness, composition, and surface morphology of the resulting AlF3 protective layers. In the second section, the reflectivity of samples is optimized at selected important FUV wavelengths for astronomical observations. Notably, samples attained state-of-the-art reflectances of 75% at 108.5 nm (He Lyman γ), 91% at 121.6 nm (H Lyman α), 90% at 130.4 nm (OI), and of 95% at 155.0 nm (C IV). The stability over time of these passivated mirrors is also investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Approach to Startup Inventory for Viable Commercial Power Plant

Summary • FPP realization within the next 10-15 years will require dedicated efforts to improve DIR, burn fraction, fueling efficiency, and/or processing times. • Modest improvements from either the fuel cycle side or plasma physics side should be possible with considered allocation of R&D funding. • Current gaps in particular include blanket extraction at scale, improved efficiency in isotope separation and detritiation, and maximizing DIR efficiency. • Total costs for FPP construction and commissioning depend heavily on site regulation, so decreases in required SI and OI can lead to large decreases in capital outlay. • Some subsystems in the fuel cycle are required from a environmental management perspective but are both energetically expensive and time consuming, particularly water detritiation. • Low inventories but high capital and operational costs mean a centralized water detritiation plant could greatly improve likelihood of deployment of multiple FPPs on the same time scale.

MALONE, COLLIN↗
DOE OSTI2023

Genomic and Phenotypic Characterization of Shiga Toxin-Producing Escherichia albertii Strains Isolated from Wild Birds in a Major Agricultural Region in California

Escherichia albertii is an emerging foodborne pathogen. To better understand the pathogenesis and health risk of this pathogen, comparative genomics and phenotypic characterization were applied to assess the pathogenicity potential of E. albertii strains isolated from wild birds in a major agricultural region in California. Shiga toxin genes stx2f were present in all avian strains. Pangenome analyses of 20 complete genomes revealed a total of 11,249 genes, of which nearly 80% were accessory genes. Both core gene-based phylogenetic and accessory gene-based relatedness analyses consistently grouped the three stx2f-positive clinical strains with the five avian strains carrying ST7971. Among the three Stx2f-converting prophage integration sites identified, ssrA was the most common one. Besides the locus of enterocyte effacement and type three secretion system, the high pathogenicity island, OI-122, and type six secretion systems were identified. Substantial strain variation in virulence gene repertoire, Shiga toxin production, and cytotoxicity were revealed. Six avian strains exhibited significantly higher cytotoxicity than that of stx2f-positive E. coli, and three of them exhibited a comparable level of cytotoxicity with that of enterohemorrhagic E. coli outbreak strains, suggesting that wild birds could serve as a reservoir of E. albertii strains with great potential to cause severe diseases in humans.

59 BASIC BIOLOGICAL SCIENCES↗