Search NASA⌕ Search

SEARCH · Search NASA

Results for “OLAF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

The water factor in harvest-sprouting of hard red spring wheat

Sprouting in unthreshed, ripe, hard red spring wheat (Triticum aestivum L.) is induced by rain, but sprouting does not necessarily occur because the crop is wetted. The spike and grain water conditions conducive to sprouting were determined in a series of laboratory experiments. Sprouting did not occur in field growing wheat wetted to 110% water concentration until the spike water concentration was reduced to 12% and maintained at this concentration for 2 days before wetting. When cut at growth stage 11.3, Feekes scale, Saratovskaya 20 (USSR) sprouted after 4 days drying, Olaf and Alex between 7 and 15 days drying and Columbus, recognized for its resistance to harvest time sprouting, after more than 15 days drying. Sprouting potential was enhanced after 4 wetting drying cycles in which any wetted interval was too brief to permit sufficient water imbibition to initiate sprouting. At harvest ripeness, grain water concentration exceeded spike water concentration by 0.7 percentage units. Following 6 months storage, 20% of the kernels in 300 spike bundles (simulating windrows) sprouted within 28 hrs after initiation of wetting to saturation (150% water concentration). Ninety percent sprouting occurred within 8 days in bundles maintained at 75% water concentration and higher, but less sprouting occurred in bundles dried to 50% water concentration before resaturation.

Bauer, A.↗

Solution of structural analysis problems on a parallel computer

The problems of a blade-stiffened panel with a hole subjected to compression, and a deployable space mast subjected to tip loads, are treated through the application of FEM to model generation followed by the solution of a linear system of equations. Direct and iterative approaches to the solution of the linear systems are solved in turn; for the panel problems using varying numbers of processors, the incomplete Cholesky-conjugate gradient method was the fastest iterative method on all but two instances in which the number of processors was large.

Storaasli, Olaf↗

Three parallel computation methods for structural vibration analysis

The Lanczos (1950), multisectioning, and subspace iteration sequential methods for vibration analysis presently used as bases for three parallel algorithms are noted, in the aftermath of three example problems, to maintain reasonable accuracy in the computation of vibration frequencies. Significant computation time reductions are obtained as the number of processors increases. An analysis is made of the performance of each method, in order to characterize relative strengths and weaknesses as well as to identify those parameters that most strongly affect computation efficiency.

Storaasli, Olaf↗

A university teaching simulation facility

An experimental telerobotics (TR) simulation is described suitable for studying human operator (HO) performance. Simple manipulator pick-and-place and tracking tasks allowed quantitative comparison of a number of calligraphic display viewing conditions. A number of control modes could be compared in this TR simulation, including displacement, rate, and acceleratory control using position and force joysticks. A homeomorphic controller turned out to be no better than joysticks; the adaptive properties of the HO can apparently permit quite good control over a variety of controller configurations and control modes. Training by optimal control example seemed helpful in preliminary experiments.

Stark, Lawrence↗

CSM parallel structural methods research

Parallel structural methods, research team activities, advanced architecture computers for parallel computational structural mechanics (CSM) research, the FLEX/32 multicomputer, a parallel structural analyses testbed, blade-stiffened aluminum panel with a circular cutout and the dynamic characteristics of a 60 meter, 54-bay, 3-longeron deployable truss beam are among the topics discussed.

Storaasli, Olaf O.↗

Parallel-vector solution of large-scale structural analysis problems on supercomputers

A direct linear equation solution method based on the Choleski factorization procedure is presented which exploits both parallel and vector features of supercomputers. The new equation solver is described, and its performance is evaluated by solving structural analysis problems on three high-performance computers. The method has been implemented using Force, a generic parallel FORTRAN language.

Storaasli, Olaf O.↗

A parallel-vector algorithm for rapid structural analysis on high-performance computers

A fast, accurate Choleski method for the solution of symmetric systems of linear equations is presented. This direct method is based on a variable-band storage scheme and takes advantage of column heights to reduce the number of operations in the Choleski factorization. The method employs parallel computation in the outermost DO-loop and vector computation via the 'loop unrolling' technique in the innermost DO-loop. The method avoids computations with zeros outside the column heights, and as an option, zeros inside the band. The close relationship between Choleski and Gauss elimination methods is examined. The minor changes required to convert the Choleski code to a Gauss code to solve non-positive-definite symmetric systems of equations are identified. The results for two large-scale structural analyses performed on supercomputers, demonstrate the accuracy and speed of the method.

Storaasli, Olaf O.↗

Protection of electrical and electronic equipment against lightning indirect effects on the Airbus A340 wing

The provisions applied to the Airbus A340 wing wiring against lightning indirect effects are presented. The construction and installation of the wiring's shielding systems are described, and the analysis and tests performed to determine the effectiveness of the measures taken are discussed. A first evaluation of the results of the theoretical analysis together with the provisional results of tests indicate a sufficient safety margin between required and achieved protection levels.

Spiller, Olaf↗

Far-ultraviolet mapping of the Cygnus Loop with the Voyager 2 Ultraviolet Spectrometer

FUV maps of the Cygnus Loop made using spectroscopic data from the Voyager 2 Ultraviolet Spectrometer are presented. Emission line features at about 980 and about 1035 A dominate the 500-1700 A spectra of the Cygnus Loop as observed with Voyager. Maps were generated in the light of these two features. The 980 and 1035 A maps are compared with X-ray and optical images of the Cygnus Loop that have been sampled in the same manner. From this comparison it is clear that the 980 A feature arises mainly from regions of bright optical emission, whereas the 1035 A emission more closely resembles the X-ray emission. This general impression can be confirmed by inspection of the spectra as a function of position. Spectra extracted from positions corresponding to the primary shock front show the 1035 A feature to be relatively strong, while the 980 A feature is brighter when substantial optical emission is present within the aperture.

Blair, William P.↗

Discovery of a fast radiative shock wave in the Cygnus Loop using the Hopkins Ultraviolet Telescope

Observations of the far-ultraviolet spectrum of a bright radiative filament on the eastern edge of the Cygnus Loop supernova remnant are described which were made through the Hopkins Ultraviolet Telescope aboard the Astro-1 Space Shuttle mission in December 1990. Observations include strong emission lines of C III 977, N III 991, and O VI 032, 1038 and many fainter lines. A comparison of this spectrum with shock model calculations indicates that the emission at this position in the Cygnus Loop is dominated by 170 km/s shock wave.

Blair, William P.↗

A parallel-vector algorithm for rapid structural analysis on high-performance computers

A fast, accurate Choleski method for the solution of symmetric systems of linear equations is presented. This direct method is based on a variable-band storage scheme and takes advantage of column heights to reduce the number of operations in the Choleski factorization. The method employs parallel computation in the outermost DO-loop and vector computation via the loop unrolling technique in the innermost DO-loop. The method avoids computations with zeros outside the column heights, and as an option, zeros inside the band. The close relationship between Choleski and Gauss elimination methods is examined. The minor changes required to convert the Choleski code to a Gauss code to solve non-positive-definite symmetric systems of equations are identified. The results for two large scale structural analyses performed on supercomputers, demonstrate the accuracy and speed of the method.

Storaasli, Olaf O.↗

Parallel Methods on Large-Scale Structural Analysis and Physics Applications; Symposium, Hampton, VA, Feb. 5, 6, 1991, Selected Papers

Recent advances in parallel methods and algorithms integrated into large-scale codes are presented. Consideration is given to problem decomposition (substructuring), efficient matrix solution algorithms for shared memory architectures, dynamic and transient analysis algorithms for shared memory architectures, and algorithms for distributed and massively parallel architectures. Particular attention is given to partitioning of unstructured problems for parallel processing, parallel-vector computation for linear-structural analysis and nonlinear unconstraint optimization problems, a parallel-vector equation solver for unsymmetric matrices on supercomputers, parallel nonlinear finite element dynamic response, multigrid algorithms for solving structural mechanics problems on supercomputers, structural analysis on massively parallel computers, explicit finite element methods with contact-impact on SIMD computers, and the impact of mapping and sparsity on parallelized finite element method modules.

Storaasli, Olaf O.↗

A multiwavelength study of the supernova remnant N49 in the Large Magellanic Cloud

The 2.5-m du Pont telescope at Las Campanas, the IUE, and archival high-resolution imager X-ray data from the Einstein Observatory are used to present a detailed imaging and spectroscopic study of the SNR N49 in the LMC. The asymmetry of the optical image and the relatively high X-ray and optical luminosity of this remnant both arise from its interaction with an extended dense cloud to the southeast seen in CO emission. The optical spectra reveal clear evidence of reddening variations on spatial scales as small as about 2 arcsec over the face of the SNR. UV line emission is associated primarily with the bright optical filaments, and the total luminosity of N49 is measured in several optical and UV lines. A combined analysis of IUE and optical spectra indicates a range of radiative shock velocities. Implications for the interstellar medium surrounding N49 are discussed.

Vancura, Olaf↗

Parallel-Vector Algorithm For Rapid Structural Anlysis

New algorithm developed to overcome deficiency of skyline storage scheme by use of variable-band storage scheme. Exploits both parallel and vector capabilities of modern high-performance computers. Gives engineers and designers opportunity to include more design variables and constraints during optimization of structures. Enables use of more refined finite-element meshes to obtain improved understanding of complex behaviors of aerospace structures leading to better, safer designs. Not only attractive for current supercomputers but also for next generation of shared-memory supercomputers.

Agarwal, Tarun R.↗

Far-ultraviolet observations of the Crab Nebula using the Hopkins Ultraviolet Telescope

Observations of the FUV spectrum of the central portion of the Crab Nebula SNR using the Hopkins Ultraviolet Telescope (HUT) aboard the Astro-1 space shuttle mission in December 1990 are reported. The C IV 1549-A emission line shows two resolved components representing the front and back sides of the shell expanding at roughly +/- 1100 km/s. The He II 1640-A emission line shows only a blueshifted component corresponding to the near side of the shell. The HUT observation is compared to optical emission-line imagery and to archival IUE observations. This comparison indicates that a distribution emission component, consisting of either a number of individually faint filaments or a diffuse component, produces the bulk of the emission seen by HUT. A grid of photoionization models for the Crab Nebula filaments is calculated to infer the range of limits. The differing UV line ratios observed for these components indicates that varying carbon and/or He abundances are present in the observed material.

Blair, William P.↗