Search NASA⌕ Search

SEARCH · Search NASA

Results for “ORBITAL RENDEZVOUS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Shuttle on-orbit rendezvous targeting: Circular orbits

The strategy and logic used in a space shuttle on-orbit rendezvous targeting program are described. The program generates ascent targeting conditions for boost to insertion into an intermediate parking orbit, and generates on-orbit targeting and timeline bases for each maneuver to effect rendezvous with a space station. Time of launch is determined so as to eliminate any plane change, and all work was performed for a near-circular space station orbit.

Bentley, E. L.↗
NASA NTRS1989

Comparative flight strategies for ascent from Martian surface to orbiter rendezvous

Flight maneuvers and strategies to transport a vehicle from the Martian surface to orbiter rendezvous are analyzed to determine the most fuel-efficient method. Both endo- and exo-atmospheric flight strategies are considered for orbiter rendezvous into parking orbits of arbitrary inclination. It is found that optimal mass efficiency is achieved where the orbiter inclination is equal to or exceeds the latitude of the launch site. It is shown that high aerodynamic lifting capability improves performance for low circular orbit (LCO) rendezvous. It is suggested that the synergetic ballistic-projecting technique is best for optimal LCO rendezvous and that the all-thrust technique with plane change at apoapsis is best for optimal high elliptical orbit rendezvous.

Menees, Gene P.↗
NASA NTRS1975

Mars sample return by orbital rendezvous

The return of Mars surface samples by the orbital rendezvous mode would require smaller, lighter vehicles than the direct return mode and would limit the exposure of the earth return systems to possible contamination by Martian biota. The reference mission considered would use a single Titan IIIE/Centaur launch vehicle, carry a 1 kg sample, and be launched in late 1981. The spacecraft would consist of an orbiter, a Mars lander, a Mars ascent vehicle, an earth return vehicle, and an earth entry capsule. The Mars ascent vehicle is the only all-new vehicle required, the others being derived from Viking and other programs. A key consideration is the feasibility of automatic rendezvous and sample transfer between the ascent vehicle and orbiter in Mars orbit. The maneuvers required and the maneuver algorithm developed in a NASA feasibility study are described in detail. The possibility of international cooperation on a Mars orbital rendezvous mission is discussed.

Moore, J. W.↗
NASA NTRS1995

Enchanted rendezvous: John C. Houbolt and the genesis of the lunar-orbit rendezvous concept

This is the fourth publication of the 'Monographs in Aerospace History' series, prepared by the NASA History Office. These publications are intended to be tightly focused in terms of subject, relatively short in length, and reproduced to allow timely and broad dissemination to researchers in aerospace history. This publication details the arguments of John C. Houbolt, an engineer at the Langley Research Center in Hampton, Virginia, in his 1961-1962 campaign to support the lunar-orbit rendezvous (LOR). The LOR was eventually selected during Project Apollo as the method of flying to the Moon, landing on the surface, and returning to Earth. The LOR opted to send the entire lunar spacecraft up in one launch, enter into the lunar orbit, and dispatch a small lander to the lunar surface. It was the simplest of the various methods, both in terms of development and operational costs, but it was risky. There was no room for error or the crew could not get home; and the more difficult maneuvers had to be done when the spacecraft was committed to a circumlunar flight. Houbolt was one of the most vocal people supporting the LOR.

Hansen, James R.↗
NASA NTRS1999

Mars Orbit Rendezvous Strategy for the Mars 2003/2005 Sample Return Mission

The primary objective of the Mars 2003/2005 Sample Return Project is to return Martian surface materials to Earth from two different sites by the year 2008. The baseline mission plan relies heavily on the use of a Mars orbit rendezvous strategy similar to the lunar orbit rendezvous scheme used for the Apollo missions. The 2003 mission consists of a single spacecraft comprised of a Lander, Rover, and Mars ascent vehicle (MAV). The 2003 mission will be launched on a Delta-III-class launch vehicle in May/June 2003 and arrive at Mars in December 2003/January 2004. The Lander deploys the Rover to collect surface samples from several sites and return them to the Lander where they are transferred to a sample canister onboard the MAV. The MAV is launched into a low Mars orbit (targeted for 600 km circular, 45 deg inclination) and releases the sample canister to await retrieval by an Orbiter launched in 2005. (The sample canister is a passive vehicle with no maneuvering capability.) The duration of Mars surface operations is at most about 90 days. The 2005 mission consists of two separate spacecraft: a Lander/Rover/MAV spacecraft identical to that used for the 2003 mission and an Orbiter carrying an Earth Entry Vehicle (EEV). Both spacecraft will be launched on a single Ariane-5 in August 2005 and arrive at Mars in July/August 2006. A second sample canister is delivered to Mars orbit using the same scenario as was used for the 2003 mission. The Orbiter uses aerocapture for insertion into Mars orbit (targeted for 250 x 1400 km, 45 deg inclination). During its approximately one-year stay at Mars, the Orbiter will search for and attempt to rendezvous first with the 2003 sample canister and then with the 2005 sample canister. After retrieval, each sample canister is transferred to the EEV. The Orbiter departs Mars in July 2007 and returns to Earth in October 2008 on a trajectory targeted for landing at the Utah Test and Training Range (UTTR). After deploying the EEV, the Orbiter performs a deflection maneuver to avoid reentry into Earth's atmosphere.

DAmario, Louis A.↗
NASA NTRS1985

Non-linear guidance laws for automatic orbital rendezvous

In the automatic assembly of space stations or the automatic rendezvous and docking of a space-shuttle vehicle with a space station, it is of interest to determine suitable guidance laws for orbital rendezvous which are amenable to on-board implementation. In this paper, various forms of nonlinear guidance laws for automatic orbital rendezvous of two bodies represented by point masses in a central Newtonian gravitational field are derived. A basic requirement is that the approach be smooth and nonoscillatory. The global dynamic behavior of each of the resulting feedback systems is determined analytically and/or by computer simulation.

Wang, P. K. C.↗