Search NASA⌕ Search

SEARCH · Search NASA

Results for “OUTLET STRUCTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

CFD Analysis of Upper Plenum Flow for a Sodium-Cooled Small Modular Reactor

Upper plenum flow behavior is important for many operational and safety issues in sodium fast reactors. The Prototype Gen-IV Sodium Fast Reactor (PGSFR), a pool-type, 150 MWe output power design, was used as a reference case for a detailed characterization of upper plenum flow for normal operating conditions. Computational Fluid Dynamics (CFD) simulation was utilized with detailed geometric modeling of major structures. Core outlet conditions based on prior system-level calculations were mapped to approximate the outlet temperatures and flow rates for each core assembly. Core outlet flow was found to largely bypass the Upper Internal Structures (UIS). Flow curves over the shield and circulates within the pool before exiting the plenum. Cross-flows and temperatures were evaluated near the core outlet, leading to a proposed height for the core outlet thermocouples to ensure accurate assembly-specific temperature readings. A passive scalar was used to evaluate fluid residence time from core outlet to IHX inlet, which can be used to assess the applicability of various methods for monitoring fuel failure. Additionally, the gas entrainment likelihood was assessed based on the CFD simulation results. Based on the evaluation of velocity gradients and turbulent kinetic energies and the available gas entrainment criteria in the literature, it was concluded that significant gas entrainment is unlikely for the current PGSFR design.

computational fluid dynamics↗

Next Generation Nuclear Plant Project Technology Development Roadmaps: The Technical Path Forward for 750–800°C Reactor Outlet Temperature

This document presents the NGNP Critical PASSCs and defines their technical maturation path through Technology Development Roadmaps (TDRMs) and their associated Technology Readiness Levels (TRLs). As the critical PASSCs advance through increasing levels of technical maturity, project risk is reduced and the likelihood of within-budget and on-schedule completion is enhanced. The current supplier-generated TRLs and TDRMs for a 750–800°C reactor outlet temperature (ROT) specific to each supplier are collected in Appendix A.

42 ENGINEERING↗

INNOVATIVE APPROACHES TO COMPLYING WITH VERY LOW NATIONAL POLLUTANT DISCHARGE ELIMINATION SYSTEM (NPDES) PERMIT LIMITS FOR METALS

The NPDES permit issued to the Savannah River Site (SRS) in 2003 contained very low metals limits for several outfalls. Copper, lead and zinc limits were as low as seven micrograms per liter (7 ug/l), 1 ug/l, and 100 ug/l, respectively. The permit contained compliance schedules that provided SRS with only three to five years to select and implement projects that would enable outfall compliance. Discharges from a few outfalls were eliminated or routed into other locations relatively inexpensively. However, some outfall problems were much more difficult to correct. SRS personnel implemented several innovative projects in order to meet compliance schedule deadlines as inexpensively as possible. These innovations included (1) connecting several outfall discharges to the site's Central Sanitary Wastewater Treatment Facility (CSWTF), (2) constructing a treatment wetlands and completing a water-effects ratio (WER) on its effluent, (3) installing a stannous chloride feed system to remove mercury in an existing air stripper, and (4) constructing a humic acid feed system to increase effluent dissolved organic carbon (DOC) content and take advantage of biotic ligand modeling to raise effluent limits.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Partial inhibition of activin receptor-like kinase 4 alleviates bladder fibrosis caused by bladder outlet obstruction

The bladder undergoes profound structural alterations after bladder outlet obstruction (BOO), characterized by hypertrophy of the bladder wall and accumulation of extracellular matrix (ECM). Transforming growth factor-β (TGF-β) has been found to promote fibrosis of the bladder induced by partial bladder outlet obstruction (pBOO). Activin receptor-like kinase 4 (ALK4) is a downstream receptor of the TGF-β superfamily. However, the role of the ALK4–Smad2/3 pathway in the pathogenesis of bladder fibrosis caused by pBOO remains unknown. This study focused on learning the role of ALK4 in the process of bladder fibrosis caused by pBOO. The pBOO mice models showed that ALK4 expression was found to upregulate in the wild-type bladder 6 weeks after pBOO compared to control group. Then, mice with heterozygous knockout of the ALK4 gene (ALK4+/−) were generated. Histological analysis and Western blot (WB) results showed significant suppression of collagen expression in the bladders of ALK4+/− mice after pBOO compared with WT mice. WB also showed that ALK4+/− mice demonstrated significant suppression of phosphorylated Smad2/3 (p-Smad2/3) expression in the bladder 6 weeks after pBOO but not of phosphorylated extracellular signal-regulated kinase, c-Jun N-terminal kinase or protein 38 (p-ERK, p-JNK, p-P38) expression. This effect might have occurred through partial inactivation of the Smad2/3 signaling pathway. In vitro, ALK4 overexpression promoted collagen production in cultured BSMCs and activated the Smad2/3 signaling pathway. Taken together, our results demonstrated that ALK4 insufficiency alleviated bladder fibrosis in a mouse model of pBOO partly by suppressing Smad2/3 activity.

60 APPLIED LIFE SCIENCES↗

Automatic Identification and Truncation of Boundary Outlets in Complex Imaging-Derived Biomedical Geometries

Fast and accurate reconstruction of imaging-derived geometries and subsequent quality mesh generation for biomedical computation are enabling technologies for both clinical and research simulations. Often, the transformation of image to mesh is the rate-limiting step, requiring arduous manual manipulations. A challenging part of this process is the introduction of computable, orthogonal boundary patches, namely the outlets, into treed structures, such as vasculature, arterial or airway trees. Herein, we present efficient and robust algorithms for automatically identifying and truncating the outlets for complex biomedical geometries. Our approach is based on a conceptual decomposition of objects into three different types of local structures, including tips, segments, and branches, where the tips determine the outlets. We define the tips by introducing a novel geometric concept called the average interior center of curvature (AICC), and identify those that are physically stable and numerically noise resistant through successive inflation and deflation tests. We compute well-defined orthogonal planes, which truncate the tips into outlets. The rims of the outlets are then connected into curves, and the outlets are then closed using Delaunay triangulation with the curves as the boundary constraints. Our approach is efficient, with near linear time complexity. We illustrate the effectiveness and robustness of our approach with a variety of complex lung and coronary artery geometries.

60 APPLIED LIFE SCIENCES↗

Air/fuel supply system for use in a gas turbine engine

A fuel injector for use in a gas turbine engine combustor assembly. The fuel injector includes a main body and a fuel supply structure. The main body has an inlet end and an outlet end and defines a longitudinal axis extending between the outlet and inlet ends. The main body comprises a plurality of air/fuel passages extending therethrough, each air/fuel passage including an inlet that receives air from a source of air and an outlet. The fuel supply structure communicates with and supplies fuel to the air/fuel passages for providing an air/fuel mixture within each air/fuel passage. The air/fuel mixtures exit the main body through respective air/fuel passage outlets.

42 ENGINEERING↗

Heat transfer device having an enclosure and a non-permeable barrier inside the enclosure

A heat transfer device includes a hollow spacer between opposed substrates, defining an enclosure, at least one of the substrates adapted to be secured to at least one heat source. A non-permeable barrier is in the enclosure between the substrates. A first chamber inside the enclosure is defined by the spacer, the substrates, and the barrier, the first chamber in fluid communication with at least one first inlet and first outlet. A second chamber inside the enclosure and outside the first chamber and is defined by the spacer, the substrates, and the barrier, the second chamber in fluid communication with at least one second outlet. A wick structure is secured to at least one substrate, a first portion of the wick structure in the first chamber, and a second portion of the wick structure in the second chamber and interconnecting in passive liquid communication with the first portion.

Shaeri, Mohammad Reza↗

Report on Properties and Microstructure of 3D Printed Inc-718

The report presents the microstructure and mechanical properties of 3D printed Inconel 718 to assess its potential use as a structural material for the Transformation Challenge Reactor (TCR). The structural components near the outlet of the core will experience significant neutron fluxes and outlet coolant temperatures from the hot standby temperature of 300°C to nearly 550°C at the center of the part. These components must support the core in appropriate loading conditions and require structural analysis at relevant temperatures. Strong spatial and chemical heterogeneity was found in as-built (ASB) Inconel 718. Three heat treatments were designed and conducted to simplify the microstructure and determine how each precipitating phase contributed to the overall strength. Baseline mechanical properties were measured from uniaxial tensile tests on subsize SS-J2 specimens at room temperature and at elevated temperatures of 300, 450, and 600°C. Microstructure electron microscopy was performed on ASB Inconel 718 and heat treated to correlate the observed mechanical properties with nanoscale features. Homogenization of the microstructure led to a highly ductile Inconel with lower strength compared with wrought Inconel 718. The tensile properties of additively manufactured 718 using a standard ASTMrecommended heat treatment were consistent with literature and with the ASTM for the properties of this alloy. A higher fraction of the δ phase led to shorter uniform elongation without altering other engineering properties.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Report on Evolution of Inconel 718 Following HFIR Irradiation

The report presents the microstructure and mechanical properties of 3D printed Inconel 718 after irradiation in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) to assess its potential use as a structural material. The structural components near the outlets of several proposed reactor cores will experience significant neutron fluxes and outlet coolant temperatures ranging from the hot standby temperature of 300 °C to nearly 550 °C at the center of the part. These components must support the core in appropriate loading conditions and require structural analysis at relevant temperatures. In FY21, three heat treatments were designed and conducted to simplify the microstructure and to determine how each precipitating phase contributed to the overall strength. In FY21, baseline mechanical properties were measured from uniaxial tensile tests on subsize SS-J2 specimens at room temperature and at elevated temperatures of 300, 450, and 600 °C to serve a comparison to the irradiated properties. Four capsules containing 3D printed Inconel 718 were inserted into HFIR in FY21 for a matrix of two temperatures and two doses. The lower of the two doses was available for characterization in FY22. Multiple heat treatments of Inconel 718 irradiated to nominal conditions of 2 displacements per atom (dpa) at either 300 or 600 °C were strained with uniaxial tensile tests at the Irradiated Material Examination and Testing (IMET) Facility to discern the mechanical properties. Transmission electron microscopy was performed to correlate the observed mechanical properties with nanoscale features. The initially homogenous AM718-HM increased in strength at both irradiation temperatures based on a high density of nanometer-scale radiation-induced cavities at lower temperature and nucleation and growth of γ" precipitates at higher temperatures. The precipitate-hardened AM718-HT2 showed very small differences in strength before and after irradiation: the contribution to strength from γ" precipitates was replaced with dislocation loops. Because the radioactivity of the nickel superalloys from neutron activation limited the scope of the analysis, a feasibility study examined the possibility of an ultra-miniature specimen geometry, colloquially SS-Tiny (SS-T), for mechanical property determination using the nonirradiated Inconel 718. This study found an overestimation of ductility from the SS-T geometry with yield strength and ultimate tensile strength slightly above the SS-J2 geometry: this could be contributed to a reduction in specimen thickness.

36 MATERIALS SCIENCE↗

U.S. Pellet Industry Overview

The U.S. production of wood pellets has grown to over 8 million tons by 2015 (FAO 2016). The majority of the production capacity increase took place in the U.S. Southeast and is associated with industrial wood pellet production for export markets. In 2015, over 5 million tons were exported, 99% of which went to EU markets (84% to the UK alone) (EUROSTAT 2015, FAOSTAT 2016, USDA 2016). The production and consumption growth of U.S. residential wood pellets has been slow in comparison. The industrial and residential wood pellet markets are beginning to merge slowly, but production excess (e.g., in 2015 and 2016) in the industrial wood pellet segment could not be fully absorbed by domestic or oversea residential markets. The main growth path for U.S. wood pellet production is still seen to lie in oversea markets (Bingham 2016, Strauss 2016). Demand increases for industrial pellets are projected to occur within the next years in Europe (Netherlands, Denmark, UK, Belgium) and Asia (predominantly Japan). At the same time, subsidy schemes in Europe are also bound to be phased out within the next decade. U.S. suppliers will have to compete with other supply regions (e.g., Western Canada to Asia) in the long-term, and are already focusing on selling more and more into non-subsidized markets such as biochemicals, absorbents, and soil amendments (Keppler 2016). An outlook of U.S. industrial wood pellet production under a potential growth in U.S. biopower demand and a lack thereof shows a wood pellet oversupply of 9-10 million tons by 2030, equaling roughly 12.5 million tons of production capacity, 20-30 large-scale plants, or 15 million green tons of woody biomass. Once the U.S. production of wood pellets outgrows combustion market demand (which will plateau even with a domestic expansion of biopower) the industry will require additional outlets to avoid a structural decline and bankruptcy. This will create a resource push and cost reduction, driving the development of a U.S. cellulosic biofuels industry.

09 BIOMASS FUELS↗

Modeling Functional Organic Chemistry in Arctic Rivers: An Idealized Siberian System

Rivers of the Arctic will become ever more important for the global climate, since they carry a majority of continental dissolved organic carbon flux into the rapidly changing polar ocean. Aqueous organics comprise a wide array of functional groups, several of which are likely to impact coastal and open water biophysical properties. Light attenuation, interfacial films, aerosol formation, gas release and momentum exchange can all be cited. We performed Lagrangian kinetic modeling for the evolution of riverine organic chemistry as the molecules in question make their way from the highlands to Arctic outlets. Classes as diverse as the proteins, sugars, lipids, re-condensates, humics, bio-tracers and small volatiles are all included. Our reduced framework constitutes an idealized northward flow driving a major hydrological discharge rate and primarily representing the Russian Lena. Mountainous, high solute and tundra sources are all simulated, and they meet up at several points between soil and delta process reactors. Turnover rates are parameterized beginning with extrapolated coastal values imposed along a limited tributary network, with connections between different terrestrial sub-ecologies. Temporal variation of our total dissolved matter most closely resembles the observations when we focus on the restricted removal and low initial carbon loads, suggesting relatively slow transformation along the water course. Thus, channel combinations and mixing must play a dominant role. Nevertheless, microbial and photochemical losses help determine the final concentrations for most species. Chemical evolution is distinct for the various functionalities, with special contributions from pre- and post-reactivity in soil and delta waters. Several functions are combined linearly to represent the collective chromophoric dissolved matter, characterized here by its absorption. Tributaries carry the signature of lignin phenols to segregate tundra versus taiga sources, and special attention is paid to the early then marine behaviors of low molecular weight volatiles. Heteropolycondensates comprise the largest percentage of reactive carbon in our simulations due to recombination/accumulation, and they tend to be preeminent at the mouth. Outlet concentrations of individual structures such as amino acids and absorbers lie above threshold values for biophysical influence, on the monolayer and light attenuation. The extent of coastal spreading is examined through targeted regional box modeling, relying on salinity and color for calibration. In some cases, plumes reach the scale of peripheral arctic seas, and amplification is expected during upcoming decades. Conclusions are mapped from the Lena to other boreal discharges, and future research questions are outlined regarding the bonding type versus mass release as permafrost degrades. Dynamic aqueous organic coupling is recommended for polar system models, from headwaters to coastal diluent.

54 ENVIRONMENTAL SCIENCES↗

Effects of bypass flow and power change and deviation on performance of thermal mixing structure of HTR-PM - 18424

The temperature of bypass flow not flowing through the reactor core is obviously lower than that of the main coolant helium in a High Temperature Gas-cooled Reactor (HTGR). In addition, change and deviation of reactor power because of power regulation will introduce higher radial temperature difference of coolant helium from reactor to steam generator. In order to investigate the effects of bypass flow and power change and deviation on radial temperature difference of the helium flow entering the steam generator, model experiments and simulation calculations are proposed to evaluate the mixing performance of the thermal mixing structure at HTR-PM reactor core outlet. The experiments on Test Facility Hot Gas Mixing (TF-HGM) are carried out to observe the influences of bypass flow and reactor power deviation on mixing performance. In addition, some simulation calculations are conducted for the main mixing structure of the TF-HGM facility and the thermal mixing structure of HTR-PM. According to the results of experiments and simulation calculations, the maximum radial temperature difference at the outlet of the mixing structure fulfils the requirement by steam generator, less than 30 deg. C ({+-}15 deg. C), under all considered conditions. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Systems and methods for periodic nodal surface based reactors, distributors, contactors and heat exchangers

The present disclosure relates to a transport mechanism apparatus for transporting at least one of a gas or a fluid. The transport mechanism may have an inlet, an outlet and an engineered cellular structure forming a periodic nodal surface, which may include a triply periodic minimal surface (TPMS) structure. The structure is formed in a layer-by-layer three dimensional (3D) printing operation to include cells propagating in three dimensions, where the cells include non-intersecting, continuously curving wall portions having openings, and where the opening in the cells form a plurality of flow paths throughout the transport mechanism from the inlet to the outlet, and where portions of the cells form the inlet and the outlet.

Iyer, Jaisree Kannan↗

Devices and methods for managing noncombustible gasses in nuclear power plants

Systems passively eliminate noncondensable gasses from facilities susceptible to damage from combustion of built-up noncondensable gasses, such as H2 and O2 in nuclear power plants, without the need for external power and/or moving parts. Systems include catalyst plates installed in a lower header of the Passive Containment Cooling System (PCCS) condenser, a catalyst packing member, and/or a catalyst coating on an interior surface of a condensation tube of the PCCS condenser or an annular outlet of the PCCS condenser. Structures may have surfaces or hydrophobic elements that inhibit water formation and promote contact with the noncondensable gas. Noncondensable gasses in a nuclear power plant are eliminated by installing and using the systems individually or in combination. An operating pressure of the PCCS condenser may be increased to facilitate recombination of noncondensable gasses therein.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Devices and methods for managing noncondensable gasses in nuclear power plants

Systems passively eliminate noncondensable gasses from facilities susceptible to damage from combustion of built-up noncondensable gasses, such as H2 and O2 in nuclear power plants, without the need for external power and/or moving parts. Systems include catalyst plates installed in a lower header of the Passive Containment Cooling System (PCCS) condenser, a catalyst packing member, and/or a catalyst coating on an interior surface of a condensation tube of the PCCS condenser or an annular outlet of the PCCS condenser. Structures may have surfaces or hydrophobic elements that inhibit water formation and promote contact with the noncondensable gas. Noncondensable gasses in a nuclear power plant are eliminated by installing and using the systems individually or in combination. An operating pressure of the PCCS condenser may be increased to facilitate recombination of noncondensable gasses therein.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Ducted combustion systems utilizing duct-exit tabs

A ducted combustion system is disclosed. The ducted combustion system includes a combustion chamber bound by a flame deck surface of a cylinder head of an internal combustion engine and by a piston top surface of a piston disposed within the internal combustion engine. The system includes a fuel injector including one or more orifices, the one or more orifices injecting fuel into the combustion chamber as at least one fuel jet. The system includes at least one duct disposed within the combustion chamber between the flame deck surface and the piston top surface, the at least one duct including one or more structural tabs proximate to an outlet of the at least one duct and being disposed such that the at least one fuel jet, at least partially, enters one of the at least one duct upon being injected into the combustion chamber.

42 ENGINEERING↗

Transporting particulate material

A material transporting system comprises a material transporting apparatus (100) including a material transporting apparatus hopper structure (200, 202), which comprises at least one rotary transporting apparatus; a stationary hub structure (900) constraining and assisting the at least one rotary transporting apparatus; an outlet duct configuration (700) configured to permit material to exit therefrom and comprising at least one diverging portion (702, 702'); an outlet abutment configuration (800) configured to direct material to the outlet duct configuration; an outlet valve assembly from the material transporting system venting the material transporting system; and a moving wall configuration in the material transporting apparatus capable of assisting the material transporting apparatus in transporting material in the material transporting system. Material can be moved from the material transporting apparatus hopper structure to the outlet duct configuration through the at least one rotary transporting apparatus, the outlet abutment configuration, and the outlet valve assembly.

36 MATERIALS SCIENCE↗

Hierarchical triply periodic minimal surface structures as heat exchangers and reactors

The present disclosure relates to a transport mechanism apparatus for transporting at least one of a gas or a fluid. The transport mechanism may have an inlet, an outlet and a triply periodic minimal surface (TPMS) structure. The TPMS structure is formed in a layer-by-layer three dimensional (3D) printing operation to include cells propagating in three dimensions, where the cells include wall portions having openings, and where the cells form a plurality of flow paths throughout the transport mechanism from the inlet to the outlet, and where the cells form the inlet and the outlet.

Roy, Pratanu↗