Search NASA⌕ Search

SEARCH · Search NASA

Results for “One Atmosphere”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Isolated Rotor Forward Flight Testing from One Atmosphere down to Martian Atmospheric Densities

With the recent interest in Martian exploration using Unmanned Aerial Vehicles (UAV), an experimental study was conducted to investigate rotor performance at Martian atmospheric conditions. Both simulation and testing of rotors is vital for the evaluation of performance and behavior of a rotor, especially when subjected to a Marian atmosphere. One critical test that has not been performed to date is simulated helicopter forward flight in a Martian atmosphere. To achieve this, the test must be conducted in a facility which can be evacuated to the atmospheric pressure and density of Mars. A unique 40-in diameter rotor, roughly approximating a proposed design for a Mars Helicopter (MH), was tested in forward flight at Mars atmospheric pressure at the NASA Ames Planetary Aeolian Laboratory (PAL). The goal of this experiment was to collect rotor thrust, RPM, power, torque, and acoustics measurements. Subsequently, these results are compared with simulated cases using a mid-fidelity Computational Fluid Dynamics (CFD) approach. As expected, rotor thrust and power results are drastically reduced when under low atmospheric conditions. In addition, Reynolds number effects seem to play a vital role that cannot be neglected.

Ament, Geoffrey A.↗
NASA NTRS1998

Boundary Layer Flow Control with a One Atmosphere Uniform Glow Discharge Surface Plasma

Low speed wind tunnel data have been acquired for planar panels covered by a uniform, glow-discharge surface plasma in atmospheric pressure air known as the One Atmosphere Uniform Glow Discharge Plasma (OAUGDP). Streamwise and spanwise arrays of flush, plasma-generating surface electrodes have been studied in laminar, transitional, and fully turbulent boundary layer flow. Plasma between symmetric streamwise electrode strips caused large increases in panel drag, whereas asymmetric spanwise electrode configurations produced a significant thrust. Smoke wire flow visualization and mean velocity diagnostics show the primary cause of the phenomena to be a combination of mass transport and vortical structures induced by strong paraelectric ElectroHydroDynamic (EHD) body forces on the flow.

J Reece Roth↗
NASA NTRS1977

Durability testing at one atmosphere of advanced catalysts and catalyst supports for automotive gas turbine engine combustors, part 1

The durability of catalysts and catalyst supports in a combustion environment was experimentally demonstrated. A test of 1000 hours duration was completed with two catalysts, using diesel fuel and operating at catalytically supported thermal combustion conditions. The performance of the catalysts was determined by monitoring emissions throughout the test, and by examining the physical condition of the catalyst core at the conclusion of the test. The test catalysts proved to be capable of low emissions operation after 1000 hours diesel aging, with no apparent physical degradation of the catalyst support.

Heck, R. M.↗
NASA NTRS1979

One atmosphere melting experiments on ilmenite basalt 12008

An evaluation of a crystal-fractionation model for Apollo 12 ilmenite basalts with melting experiments under controlled oxygen fugacities is reported. The crystallization sequence including olivine, chromium spinel, and pigeonite phases was determined, showing that the changes in melt composition are dominated by olivine crystallization and the decrease in MgO with a corresponding increase in CaO, Al2O3, and TiO2. It is concluded that the bulk composition of the ilmenite basalts was established by crystallization of olivine and minor spinel prior to the onset of pyroxene and plagioclase.

Rhodes, J. M.↗
NASA NTRS2005

Fabrication end Deployment Testing of Meter Solar Sail Quadrants for a Scaleable Square Solar Sail Ground Test System

In order for solar sail propulsion technologies to be considered as a viable option for a wide range of near term practical missions a predictable, stable, reliable, manufactureable, scaleable, and cost effective system must be developed and tested first on earth and then on orbit. The design and development of a Scaleable Square Solar Sail System (S^4) is well underway a t AEC-Able Engineering Co. Inc., and the design and production of the Solar Sails for this system is being carried out by SRS Technologies. In April and May of 2004 a single quadrant 10-meter system was tested at NASA LARC's vacuum chamber and a four quadrant 20-meter system has been designed and built for deployment and testing in the Spring of 2005 at NASA/Glenn Research Center's Plumb Brook Facility. SRS has developed an effective and efficient design for triangular sail quadrants that are supported are three points and provide a flat reflective surface with a high fill factor. This sail design is robust enough for deployments in a one atmosphere, one gravity environment and incorporates several advanced features including adhesiveless seaming of membrane strips, compliant edge borders to allow for film membrane cord strain mismatch without causing wrinkling and low mass (3% of total sail mass) ripstop. This paper will outline the sail design and fabrication process, the lessons learned and the resulting mature production, packaging and deployment processes that have been developed. It will also highlight the scalability of the equipment and processes that were developed to fabricate and package the sails. Based on recent experience, SRS is confidant that flight worthy solar sails in the 40-120-meter size range with areal density in the 4-5g/sq m (sail minus structure) range can be produced with existing technology. Additional film production research will lead to further reductions in film thickness to less than 1 micron enabling production of sails with areal densities as low as 20 g/sq m using the current design resulting in a system areal density of as low as 5.3g/sq m. These areal densities are low enough to allow nearly all of the Solar Sail missions that have been proposed by the scientific community and the fundamental technology required to produce these sails has been demonstrated on the ground test sails that have recently been built. These demonstrations have shown that the technology is mature enough to build sails needed to support critical science missions. Solar Sails will be an enabling technology for NASA's Vision for Space Exploration by allowing communication satellite orbits that can maintain continuous communication with the polar regions of the Moon and Mars and to support solar weather monitoring to provide early warning of solar flares and storms that could threaten the safety of astronauts and other spacecraft.

Laue, Greg↗
NASA NTRS2005

Fabrication and Deployment Testing of Solar Sail Quadrants for a 20-Meter Solar Sail Ground Test System Demonstration

A 20-meter Scalable Square Solar Sail (S(sup 4)) System was produced and successfully completed functional vacuum testing in NASA Glenn's Space Power Facility at Plum Brook Station Ohio in May 2005. The S(sup 4) system was designed and developed by ATK Space Systems, and the design and production of the Solar Sails for this system was carried out by SRS Technologies. The S(sup 4) system consists of a central structure with four deployable carbon fiber masts that support four triangular sails. SRS has developed an effective and efficient design for triangular sail quadrants that are supported at three points and provide a flat reflective surface with a high fill factor. This sail design is robust enough for deployments in a one atmosphere, one gravity environment and incorporates several advanced features including adhesiveless seaming of membrane strips, compliant edge borders to allow for film membrane cord strain mismatch without causing wrinkling and low mass (3% of total sail mass) ripstop. This paper will outline some of the sail design and fabrication processes and the mature production, packaging and deployment processes that have been developed. This paper will also detail the successful ambient and vacuum testing of the sails and the ATK spacecraft structure. Based on recent experience and testing, SRS is confidant that high Technology Readiness Level (TRL) 5-6 solar sails in the 40-120-meter size range with areal density in the 4-5 grams per square meters (sail minus structure) range can be produced with existing technology. Additional film production research will lead to further reductions in film thickness to less than 1 micron enabling production of sails with areal densities as low as 2.0 grams per square meters using the current design, resulting in a system areal densities as low as 5.3 grams per square meters (sail and structure). These areal densities are low enough to allow nearly all of the Solar Sail missions that have been proposed by the scientific community. The fundamental technologies required to produce these systems has been demonstrated on the 20-meter S(sup 4) sails that have recently completed ground testing demonstrating a mature and technology suitable for incorporation into future flight validation and future mission. Solar Sails can support NASA's Vision for Space Exploration by allowing communication satellite orbits that can maintain continuous communication with the polar regions of the Moon and Mars and to support solar weather monitoring to provide early warning of solar flares and storms that could threaten the safety of astronauts and other spacecraft.

Laue, Greg↗
NASA NTRS2006

Recent Advances in Solar Sail Propulsion Systems at NASA

Supporting NASA's Science Mission Directorate, the In-Space Propulsion Technology Program is developing solar sail propulsion for use in robotic science and exploration of the solar system. Solar sail propulsion has the potential to provide longer on-station operation, increased scientific payload mass fraction, and access to previously inaccessible orbits for multiple potential science missions. Two different 20-meter solar sail systems were produced and successfully completed functional vacuum testing last year in NASA Glenn s Space Power Facility at Plum Brook Station Ohio. The sails were designed and developed by ATK Space Systems and L'Garde, respectively. The sail systems consist of a central structure with four deployable booms that support the sails. The sail designs are robust enough for deployments in a one atmosphere, one gravity environment and are scalable to much larger solar sails - perhaps as large as 150 meters on a side. In addition, computational modeling and analytical simulations have been performed to assess the scalability of the technology to the large sizes (150 meters) required to implement the first generation of missions using solar sails. Life and space environmental effects testing of sail and component materials are also nearly complete. This paper will summarize recent technology advancements in solar sails and their successful ambient and vacuum environment testing.

Johnson, Les↗
NASA NTRS2006

Recent Advances in Solar Sail Propulsion at NASA

Supporting NASA's Science Mission Directorate, the In-Space Propulsion Technology Program is developing solar sail propulsion for use in robotic science and exploration of the solar system. Solar sail propulsion will provide longer on-station operation, increased scientific payload mass fraction, and access to previously inaccessible orbits for multiple potential science missions. Two different 20-meter solar sail systems were produced and successfully completed functional vacuum testing last year in NASA Glenn's Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by ATK Space Systems and L'Garde, respectively. These sail systems consist of a central structure with four deployable booms that support the sails. This sail designs are robust enough for deployments in a one atmosphere, one gravity environment, and are scalable to much larger solar sails-perhaps as much as 150 meters on a side. In addition, computation modeling and analytical simulations have been performed to assess the scalability of the technology to the large sizes (>150 meters) required for first generation solar sails missions. Life and space environmental effects testing of sail and component materials are also nearly complete. This paper will summarize recent technology advancements in solar sails and their successful ambient and vacuum testing.

Johnson, Les↗
NASA NTRS1986

Measurements of physical properties of model Titan atmospheres

One aspect of the study of Titan's atmosphere is the elucidation of the chemical and physical nature of the aerosols. In order to facilitate this, a program to produce laboratory synthesized model materials for Titan's aerosol and to study their chemical and physical properties is now in progress. Various processes, including electric discharge, photolysis by ultraviolet light, and irradiation by energetic particles, will be used to produce the materials. A first set of experiments where a nominal Titan mixture (97%N2, 3% CH4, 0.2% H2) was subjected to pulsed high temperature shocks yielded a reddish brown waxy solid. This material was subjected to pyrolysis/gas chromatography, a technique that has been proposed as a method for analysis of the Titan aerosols. Preliminary results show the material to consist of simple hydrocarbons but little else, at least up to temperatures of 600 C. Since the material was colored, compounds other than those mentioned above must be present.

Scattergood, T. W.↗
NASA NTRS2010

Status of Solar Sail Technology Within NASA

In the early 2000s, NASA made substantial progress in the development of solar sail propulsion systems for use in robotic science and exploration of the solar system. Two different 20-m solar sail systems were produced and they successfully completed functional vacuum testing in NASA Glenn Research Center's (GRC's) Space Power Facility at Plum Brook Station, Ohio. The sails were designed and developed by ATK Space Systems and L Garde, respectively. The sail systems consist of a central structure with four deployable booms that support the sails. These sail designs are robust enough for deployment in a one-atmosphere, one-gravity environment and were scalable to much larger solar sails perhaps as large as 150 m on a side. Computation modeling and analytical simulations were also performed to assess the scalability of the technology to the large sizes required to implement the first generation of missions using solar sails. Life and space environmental effects testing of sail and component materials were also conducted. NASA terminated funding for solar sails and other advanced space propulsion technologies shortly after these ground demonstrations were completed. In order to capitalize on the $30M investment made in solar sail technology to that point, NASA Marshall Space Flight Center (MSFC) funded the NanoSail-D, a subscale solar sail system designed for possible small spacecraft applications. The NanoSail-D mission flew on board the ill-fated Falcon-1 Rocket launched August 2, 2008, and due to the failure of that rocket, never achieved orbit. The NanoSail-D flight spare will be flown in the Fall of 2010. This paper will summarize NASA's investment in solar sail technology to-date and discuss future opportunities

Johnson, Les↗
NASA NTRS1991

Germination and growth of wheat in simulated Martian atmospheres

One design for a manned Mars base incorporates a bioregenerative life support system based upon growing higher plants at a low atmospheric pressure in a greenhouse on the Martian surface. To determine the concept's feasibility, the germination and initial growth of wheat (Triticum aestivum) was evaluated at low atmospheric pressures in simulated Martian atmosphere (SMA) and in SMA supplemented with oxygen. Total atmospheric pressures ranged from 10 to 1013 mb. No seeds germinated in pure SMA, regardless of atmospheric pressure. In SMA plus oxygen at 60 mb total pressure, germination and growth occurred but were lower than in the earth atmosphere controls.

Schwartzkopf, Steven H.↗
NASA NTRS1986

Radiative heating and cooling rates in the middle atmosphere

One of the limitations to the accurate calculation of radiative heating and cooling rates in the stratosphere and mesosphere has been the lack of accurate data on the atmospheric temperature and composition. Data from the LIMS experiment on Nimbus-7 has been extended to the South Pole with the aid of other observations. The data have been used as input to codes developed by Ramanathan and Dickinson to calculate the individual components and the net radiative heating rates from 100-0.1 mb. Solar heating due to ozone, nitrogen dioxide, carbon dioxide, water vapor and oxygen is shown to be nearly balanced by cooling in the thermal infrared spectral region due to carbon dioxide, ozone and water vapor. In the lower stratosphere, infrared transfer by ozone leads to heating that is sensitive to the distribution of tropospheric ozone, clouds and water vapor. The heating and cooling rates are adjusted slightly in order to satisfy the global mass balance. The results are in qualitative agreement with earlier calculations, but show additional detail. There is as strong temporal and vertical variation of cooling in the tropics. Radiative relaxation times are as short as 7 days or less at the stratopause.

Gille, John C.↗
NASA NTRS1975

Guidance of an aeromaneuvering orbit-to-orbit shuttle through a statistically varying atmosphere

One candidate for a reusable upper stage to be carried by the space shuttle is an aeromaneuvering orbit-to-orbit shuttle (AMOOS). This concept uses the drag of the vehicle during a pass through the atmosphere rather than the propulsion system to slow the vehicle on a return from a high energy orbit. The nature and magnitude of the sensitivity of AMOOS to uncertainties in the properties of the atmosphere are shown. Various guidance schemes for correcting for the effects that the unpredictable variations in the atmosphere have on the trajectory are discussed. For the mission studied here, a payload retrieval from geosynchronous orbit with aerodynamic plane change, a linear feedback guidance scheme was developed. A relatively simple heuristic law was used to demonstrate the concept. Using optimal control theory a feedback law was developed analytically. Testing with a large number of different atmospheres showed this law to be a feasible means of controlling the AMOOS trajectory. Refinements to the technique offer promise of significant improvement, and these are discussed.

Rehder, J. J.↗