Search NASA⌕ Search

SEARCH · Search NASA

Results for “PAIRING ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Non-empirical pairing energy functional in nuclear matter and finite nuclei

We study {sup 1}S{sub 0} pairing gaps in neutron and nuclear matter as well as T=1 pairing in finite nuclei on the basis of microscopic two-nucleon interactions. Special attention is paid to the consistency of the pairing interaction and normal self-energy contributions. We find that pairing gaps obtained from low-momentum interactions depend only weakly on approximation schemes for the normal self-energy, required in present energy-density functional calculations, while pairing gaps from hard potentials are very sensitive to the effective-mass approximation scheme.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Low Energy Pair Breaking Mechanism

A new set of time dependent coupled channel equations for pair breaking are deduced from the variational principle. The odd-even effect in fission is investigated within the model. The essential idea is that the seniority one and the seniority two configuration mixing is managed under the action of some inherent low lying time dependent excitations produced in the avoided crossing regions. It must be mentioned that the odd-even effect in cold fission is a strange phenomenon. The odd even fragmentation dominates at very low excitation energy while the even-even partitions are dominant for excitations above 4-6 MeV. The problem is that in cold processes the nuclear system doesn't possess enough energy to break a pair. This phenomenon is explained within our equations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Neutrino pair energy deposition in supernovae

The role of neutrino-antineutrino annihilation (producing an electron-positron pair) in delayed type II supernova explosions is investigated theoretically. The assumptions and analysis of Goodman et al. (1987) are examined in detail, with a focus on the need for a large density gradient at the edge of the neutrinosphere. It is found that the neutrino annihilation mechanism cannot contribute significantly to the energy of the explosion.

Cooperstein, J.↗

Alternative method for evaluating the pair energy of nucleons in nuclei

An alternative method for determining the odd–even effect parameter related to special features of the Casimir operator in Wigner’s mass formula for nuclei is proposed. A procedure for calculating this parameter is presented. The proposed method relies on a geometric interpretation of the Casimir operator, experimental data concerning the contribution of spin–orbit interaction to the nuclear mass for even–even and odd–odd nuclei, and systematics of energy gaps in the spectra of excited states of even–even nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Non-empirical Nuclear Energy Functionals, Pairing Gaps and Odd-Even Mass Differences

First, we briefly outline some aspects of the starting project to design non-empirical energy functionals based on low-momentum vacuum interactions and many-body perturbation theory. Second, we present results obtained within an approximation of such a scheme where the pairing part of the energy density functional is constructed at first order in the nuclear plus Coulomb two-body interaction. We discuss in detail the physics of the odd-even mass staggering and the necessity to compute actual odd-even mass differences to analyze it meaningfully.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross section for production of low-energy electron-positron pairs by relativistic heavy ions

Starting with the lowest-order unscreened QED matrix element for electron-positron pair production by heavy charged particles, the paper calculates the cross section for this process differential in all independent variables and valid for all pair energies small compared to the incident particle energy. Integration over the possible emission angles of one of the pair members gives an expression that is valid for low-energy pairs that can be compared with previous work based on the Weizsaecker-Williams method. Integration over the possible angles of the other pair member then yields an expression identical to one derived by Racah. The high energy-transfer limit of the expression for the cross section integrated over electron and positron angles is found to be identical to that of Kelner in the unscreened case.

Eby, P. B.↗

Maximizing Revenue from Electrical Energy Storage Paired with Community Solar Projects in NYISO Markets

The New York State Public Service Commission recently made significant changes to the compensation mechanisms for distributed energy resources, such as solar generation. The new mechanisms, called the Value of Distributed Energy Resources (VDER), alter the value proposition of potential installations. In particular, multiple time-of-generation based pricing alternatives were established, which could lead to potential benefits from pairing energy storage systems with solar installations. This paper presents the calculations to maximize revenue from a solar photovoltaic and energy storage system installation operating under the VDER pricing structures. Two systems in two different zones within the New York Independent System Operator area were modeled. The impact of AC versus DC energy storage system interconnections with solar generation resources was also explored. The results show that energy storage systems could generate significant revenue depending on the pricing alternative being targeted and the zone selected for the project.

14 SOLAR ENERGY↗

Pair creation energy and Fano factor of silicon measured at 185 K using 55 F e X-rays

Here, the pair creation energy, ωω and the Fano factor of silicon were measured using a CCD sensor and X-rays from an 55 Fe source. The measurements were performed at a sensor temperature of 185K. The pair creation energy was measured for X-rays in the 1.7–6.5 keV range. The measured pair creation energy is ω=(3.650 ± 0.009) eV at the MnK α line energy. The Fano factor at this energy is F = 0.128±0.001. The agreement with theory and previous measurements is satisfactory. The system gain was obtained from flat field exposures using the Poisson distribution properties. These results and the details of our measurement procedure are presented below.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Shell closures, loosely bound structures, and halos in exotic nuclei

Inspired by the recent experiments indicating doubly magic nuclei that lie near the drip-line and encouraged by the success of our relativistic mean-field (RMF) plus state-dependent BCS approach to the description of the ground-state properties of drip-line nuclei, we develop this approach further, across the entire periodic table, to explore magic nuclei, loosely bound structures, and halo formation in exotic nuclei. In our RMF+BCS approach, the single-particle continuum corresponding to the RMF is replaced by a set of discrete positive-energy states for the calculations of pairing energy. Detailed analysis of the single-particle spectrum, pairing energies, and densities of the nuclei predict the unusual proton shell closures at proton numbers Z = 6, 14, 16, 34, and unusual neutron shell closures at neutron numbers N = 6, 14, 16, 34, 40, 70, 112. Further, in several nuclei like the neutron-rich isotopes of Ca, Zr, Mo, etc., the gradual filling of lowlying single-particle resonant state together with weakly bound single-particle states lying close to the continuum threshold helps accommodate more neutrons but with an extremely small increase in the binding energy. This gives rise to the occurrence of loosely bound systems of neutron-rich nuclei with a large neutron-to-proton ratio. In general, the halo-like formation, irrespective of the existence of any resonant state, is seen to be due to the large spatial extension of the wave functions for the weakly bound single-particle states with low orbital angular momentum having very small or no centrifugal barriers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

TU-F-18A-09: CT Number Stability Across Patient Sizes Using Virtual-Monoenergetic Dual-Energy CT

Purpose: Virtual-monoenergetic imaging uses dual-energy CT data to synthesize images corresponding to a single photon energy, thereby reducing beam-hardening artifacts. This work evaluated the ability of a commercial virtual-monoenergetic algorithm to achieve stable CT numbers across patient sizes. Methods: Test objects containing a range of iodine and calcium hydroxyapatite concentrations were placed inside 8 torso-shaped water phantoms, ranging in lateral width from 15 to 50 cm, and scanned on a dual-source CT system (Siemens Somatom Force). Single-energy scans were acquired from 70-150 kV in 10 kV increments; dual-energy scans were acquired using 4 energy pairs (low energy: 70, 80, 90, and 100 kV; high energy: 150 kV + 0.6 mm Sn). CTDIvol was matched for all single- and dual-energy scans for a given phantom size. All scans used 128×0.6 mm collimation and were reconstructed with 1-mm thickness at 0.8-mm increment and a medium smooth body kernel. Monoenergetic images were generated using commercial software (syngo Via Dual Energy, VA30). Iodine contrast was calculated as the difference in mean iodine and water CT numbers from respective regions-of-interest in 10 consecutive images. Results: CT numbers remained stable as phantom width varied from 15 to 50 cm for all dual-energy data sets (except for at 50 cm using 70/150Sn due to photon starvation effects). Relative to the 15 cm phantom, iodine contrast was within 5.2% of the 70 keV value for phantom sizes up to 45 cm. At 90/150Sn, photon starvation did not occur at 50 cm, and iodine contrast in the 50-cm phantom was within 1.4% of the 15-cm phantom. Conclusion: Monoenergetic imaging, as implemented in the evaluated commercial system, eliminated the variation in CT numbers due to patient size, and may provide more accurate data for quantitative tasks, including radiation therapy treatment planning. Siemens Healthcare.

07 ISOTOPE AND RADIATION SOURCES↗

Constraints on the electron-hole pair creation energy and Fano factor below 150 eV from Compton scattering in a Skipper-CCD

Fully-depleted thick silicon Skipper-charge-coupled devices (Skipper-CCDs) have achieved sub-electron read-out noise and are an important technology to probe neutrino and light dark matter interactions. However, the successful search for rare neutrino or dark-matter events requires the signal and all backgrounds to be fully characterized. In particular, a measurement of the electron-hole pair creation energy below 150 eV and the Fano factor are necessary for characterizing the dark matter and neutrino signals. Moreover, photons from background radiation may Compton scatter in the silicon bulk, producing events that can mimic a dark matter or neutrino signal. We present a measurement of the Compton spectrum using a Skipper-CCD and a $^{241}$Am source. With these data, we measure the electron-hole pair-creation energy to be $\left(3.71 \pm 0.08\right)$ eV at 130 K in the energy range between 99.3 eV and 150 eV. By measuring the widths of the steps at 99.3 eV and 150 eV in the Compton spectrum, we introduce a novel technique to measure the Fano factor, setting an upper limit of 0.31 at 90% C.L. These results prove the potential of Skipper-CCDs to characterize the Compton spectrum and to measure precisely the Fano factor and electron-hole pair creation energy below 150 eV.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental determination of electron-hole pair creation energy in 4H-SiC epitaxial layer: An absolute calibration approach

Electron-hole pair creation energy ({epsilon}) has been determined from alpha spectroscopy using 4H-SiC epitaxial layer Schottky detectors and a pulser calibration technique. We report an experimentally obtained {epsilon} value of 7.28 eV in 4H-SiC. The obtained {epsilon} value and theoretical models were used to calculate a Fano factor of 0.128 for 5.48 MeV alpha particles. The contributions of different factors to the ultimate alpha peak broadening in pulse-height spectra were determined using the calculated {epsilon} value and Monte-Carlo simulations. The determined {epsilon} value was verified using a drift-diffusion model of variation of charge collection efficiency with applied bias.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Degeneracy Removal of Spin Bands in Collinear Antiferromagnets with Non–Interconvertible Spin–Structure Motif Pair

Energy bands in antiferromagnets are supposed to be spin degenerate in the absence of spin–orbit coupling (SOC). Recent studies have identified formal symmetry conditions for antiferromagnetic crystals in which this degeneracy can be lifted, spin splitting, even in the vanishing SOC (i.e., non-relativistic) limit. Materials having such symmetries could enable spin-split antiferromagnetic spintronics without the burden of using heavy-atom compounds. However, the symmetry conditions that involve spin and magnetic symmetry are not always effective as practical material selection filters. Furthermore, these symmetry conditions do not readily disclose trends in the magnitude and momentum dependence of the spin-splitting energy. Here, it is shown that the formal symmetry conditions enabling spin-split antiferromagnets can be interpreted in terms of local motif pairs, such as octahedra or tetrahedra, each carrying opposite magnetic moments. Here, collinear antiferromagnets with such a spin-structure motif pair, whose components interconvert by neither translation nor spatial inversion, will show spin splitting. Such a real-space motif-based approach enables an easy way to identify and design materials (illustrated in real example materials) having spin splitting without the need for SOC, and offers insights into the momentum dependence and magnitude of the spin splitting.

36 MATERIALS SCIENCE↗

Characterization of a quadrant diamond transmission X-ray detector including a precise determination of the mean electron–hole pair creation energy

Precise monitoring of the incoming photon flux is crucial for many experiments using synchrotron radiation. For photon energies above a few keV, thin semiconductor photodiodes can be operated in transmission for this purpose. Diamond is a particularly attractive material as a result of its low absorption. The responsivity of a state-of-the art diamond quadrant transmission detector has been determined, with relative uncertainties below 1% by direct calibration against an electrical substitution radiometer. From these data and the measured transmittance, the thickness of the involved layers as well as the mean electron–hole pair creation energy were determined, the latter with an unprecedented relative uncertainty of 1%. Lastly, the linearity and X-ray scattering properties of the device are also described.

47 OTHER INSTRUMENTATION↗

Determination of electron-hole pair creation energy in Cd 0.9 Zn 0.1 Te 0.98 Se 0.02 quaternary semiconductor for room-temperature gamma-ray detection

We report the first-time measurement of the electron-hole pair (ehp) creation energy (W ehp ) in novel Cd 0.9 Zn 0.1 Te 0.98 Se 0.02 (CZTS) quaternary semiconductor. CZTS in single crystalline form is poised to be the future of large-volume room-temperature gamma-ray detectors due to its excellent compositional homogeneity with highly reduced defects, high-Z (atomic number) constituents, wide bandgap (1.6 eV), and superior charge transport properties. Despite a great deal of study of the material and device properties since its inception, the W ehp in CZTS has not been measured experimentally. Accurate determination of W ehp is essential for calibration of the spectrometer and other theoretical calculations. In this study we have used an absolute calibration approach, which is based on an iterative approach that yields the Wehp as the best-fit parameter. Using a 241 Am alpha emitting radioisotope and a planar CZTS detector, the Wehp in CZTS was calculated to be 4.47 eV. The obtained value has been validated by accurately predicting the peak energy for gamma rays emitted by a 137 Cs source and read by a CZTS detector with different dimensions. The dependences of the calculated W ehp value on the detector dimensions, type of interaction, and effect of charge trapping are also discussed.

42 ENGINEERING↗