Examining the Influence of Silver(I) Ion Coordination Environment in Ionic Liquids on Olefin–Paraffin Separations using Inverse Gas Chromatography
Explore the source record for details and available documents.
Tryon-Tasson, Nicholas↗
SEARCH · Search NASA
Results for “PARAFFIN”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cationic Tantalum Hydrides Catalyze Hydrogenolysis and Alkane Metathesis Reactions of Paraffins and Polyethylene
Sulfated aluminum oxide (SAO), a high surface area material containing sulfate anions that behave like weakly coordinating anions, reacts with Ta(=CH t Bu)(CH 2 t Bu) 3 to form [Ta(CH 2 t Bu) 2 (O–) 2 ][SAO] (1). Subsequent treatment with H 2 forms Ta–H + sites supported on SAO that are active in hydrogenolysis and alkane metathesis reactions. In both reactions Ta–H + is more active than related neutral Ta–H sites supported on silica. This reaction chemistry extends to melts of high-density polyethylene (HDPE), where Ta–H + converts 30% of a low molecular weight HDPE (M n = 2.5 kg mol –1 ; D = 3.6) to low molecular weight paraffins under hydrogenolysis conditions. Under alkane metathesis conditions Ta–H + converts this HDPE to a high MW fraction (M n = 6.2 kDa; D = 2.3) and low molecular weight alkane products (C 13 –C 32 ). Furthermore, these results show that incorporating charge as a design element in supported d 0 metal hydrides is a viable strategy to increase the reaction rate in challenging reactions involving reorganization of C–C bonds in alkanes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Cellulosic Biomass Sugars to Advantage Jet Fuel: Catalytic Conversion of Corn Stover to Energy Dense, Low Freeze Point Paraffins and Naphthenes (CRADA CRD-12-462 Final Report)
NREL will provide scientific and engineering support to Virent Energy Systems in three technical areas: Process Development/Biomass Deconstruction; Catalyst Fundamentals; and Technoeconomic Analysis. The overarching objective of this project is to develop the first fully integrated process that can convert a lignocellulosic feedstock (e.g., corn stover) efficiently and cost effectively to a mix of hydrocarbons ideally suited for blending into jet fuel. The proposed project will investigate the integration of Virent Energy System's novel aqueous phase reforming (APR) catalytic conversion technology (BioForming) with deconstruction technologies being investigated by NREL at the 1-500 L scale. Corn stover was chosen as a representative large volume, sustainable feedstock.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Thermal Scattering Law Data Development for Paraffin Wax
Paraffin wax is often used as a nuclear moderator to slow down the fast neutrons in experimental critical assemblies [1]. It is a colorless and soft solid material that consists primarily of straight-chain alkanes (n-alkanes), which are hydrocarbons with the general formula CnH2n+2 [2-3]. The length of the hydrocarbon chain ranges from C20 to C30 and higher [2]. It is distinguished by its solid state at room temperature and begins to melt above approximately 310 K [4]. Paraffin wax is a commonly employed substance in the manufacture of shielding. One of its noteworthy characteristics is its ability to effectively absorb the neutrons. Also, it possesses a high macroscopic cross section, which enables it to efficiently moderate neutrons. As a result, paraffin wax is extensively utilized in various applications where moderation and shielding of neutrons are needed. For simulations, it is necessary to evaluate its thermal scattering law (TSL) and cross sections. Computationally, classical molecular dynamics (CMD) simulations provide the capability of simulating atomic details. For example, several unary, binary, and few multi component mixtures have been investigated of the paraffin model by using molecular dynamics simulations [5-12]. An assessment of thermal neutron scattering in a heavy paraffinic oil treated both as a solid and a viscous fluid containing 25% linear branched paraffin (C30H62), 35% one ring cycloalkane (C30H60), 15% two rings cycloalkane (C30H58), and 25% aromatic (C30H60) chains has been studied using CMD simulations for producing TSL data [13]. Nevertheless, there is lack of TSL and cross section data for paraffin wax as most of the reported analyses focus on the unary and binary mixture of n-alkanes, which is not consistent with actual paraffin wax [2]. In this work, we applied the equilibrium CMD simulations technique to explore the structure and dynamical properties of wax, which are fundamental input to calculate the TSL. A paraffin wax system was modeled using the CMD code LAMMPS (Large-scale Atomic/Molecular Massively Parallel Simulator) [14-15] with the semi-empirical COMPASS [16] force field. The density of state (DOS) was calculated from the normalized velocity autocorrelation function (VACF), which is the Fourier transform of the normalized VACF. The DOS was used for the calculation of the TSL and thermal scattering cross sections. The paraffin wax atomic system was constructed by using the MedeA material design platform [17], and was benchmarked using available properties (i.e., density, bond lengths, angles, diffusivity, and viscosity).
Nuclear Criticality Safety Program (NCSP)↗
Development of Thermal Scattering Law and Cross Sections of Hydrogen in Paraffin Wax
Paraffin wax is frequently used as a neutron moderator and shielding material. The main component of paraffin wax is straight-chain alkanes (n-alkanes). The deposition of paraffin wax is primarily attributed to the crystallization of n-alkanes. It is important to gain a deeper understanding of the mechanisms underlying the behavior of paraffin wax, which would impact the thermal scattering Law (TSL) and cross sections and affect the analysis of neutronic and critical systems. In this work, a classical molecular dynamics (CMD) simulation model was used in LAMMPS to create the TSL and cross sections at room temperature and pressure. To generate the required velocity autocorrelation functions (VACF), previously published data were used to validate the approach and models by comparing them with key model parameters. The phonon density of state (DOS) was calculated using Fourier transformation of the normalized VACF. This DOS was used as the primary input to estimate the TSL (S($a$, $β$)) and cross sections of hydrogen in paraffin wax. The TSL and cross sections of hydrogen were estimated using the Full Law Analysis Scattering System Hub (FLASSH) code. The cross section of hydrogen in paraffin wax is consistent with other hydrocarbon materials such as polyethylene with deviations due to structure in the lowest energy region.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Large-Scale Compatibilization of Postconsumer Polyolefins in the Presence of Paraffin Wax as a Rheology Modifier
Postconsumer polyolefins (r-POs) are leading plastic waste contributors today. This study reports, for the first time, the compatibilization of r-POs at a 50 kilogram (kg) scale with a styrene block copolymer compatibilizer in the presence of paraffin waxes as rheology modifiers (RMs). The addition of the rheological modifier (RM) and compatibilizer enhances the melt flow indices (MFIs) and mechanical properties, respectively. One aspect of this study is to compare the effectiveness of low-cost paraffin wax to that of specialized and expensive RMs in r-POs. The mechanical and rheological properties such as the melt flow index (MFI) of r-POs were compared in the presence of two types of RMs. Next, the study explores the challenges encountered when scaling the compatibilization of r-POs in the presence of paraffin wax from a 10-g to a 50-kg scale. The mechanical properties were determined and compared for samples at different scales. The study further investigated the effect of the method used for blending paraffin wax with r-PO and its impact on the value of their MFI and mechanical properties. This at-scale validation could pave the way for the commercialization of r-POs.
crystallinity↗
Real-Time Measurements of Gas-Phase Medium-Chain Chlorinated Paraffins Reveal Daily Changes in Gas-Particle Partitioning Controlled by Ambient Temperature
Chlorinated paraffins (CPs) are synthetic polychlorinated n-alkanes produced as mixtures of a range of C x Cl y H 2x–y+2 formulas. CPs have numerous industrial applications but are toxic, long-lived, and environmentally ubiquitous with environmental releases occurring throughout their production, use, and disposal. Short-chain chlorinated paraffins (SCCPs, C 10–13 ) have been regulated by the United States Environmental Protection Agency since 2009 and by the Stockholm Convention since 2017. SCCP regulation is expected to cause increased production of medium-chain chlorinated paraffins (MCCPs; C 14–17 ), which are currently under consideration for Stockholm Convention regulations. Thus, there is a need to improve the understanding of MCCP environmental transport, distribution, and fate. Existing measurements are limited in their spatial and temporal coverage. Measurements of CP atmospheric loading are particularly scarce. Historically, these measurements have required long sampling times, obscuring the temporal behavior of atmospheric CPs. We report real-time in situ measurements of 18 gas-phase MCCPs. These measurements were made in the United States Southern Great Plains with nitrate ion chemical ionization mass spectrometry (NO 3 –CIMS). Here, the estimated average lower-limit concentration of MCCPs is on the order of single-digit ng/m 3 . MCCP diel behavior is partially explained by gas-particle partitioning with implications for MCCP transport and lifetimes.
54 ENVIRONMENTAL SCIENCES↗
Spontaneous formation of anisotropic microrods from paraffin wax in an aqueous environment
The construction of functional nano-/micro-architectures through self-assembly and self-organization of organic molecules and polymeric materials plays an important role in the development of many technologies. In this study, we report the spontaneous formation of uniform polymer microrods with lengths of up to a few tens of micrometers from paraffin wax. Through a solvent attrition approach, colloidal structures of paraffin wax are introduced into water. After the initial growth stage, the microrods undergo morphological transformation and end-to-end aggregation, processes likely driven by thermodynamics to create equilibrium structures with minimal interfacial energies. Here, the polymer microrods can effectively absorb hydrophobic nanoparticles, indicating their potential to serve as host materials for functional components. The formation of polymer microrods from paraffin wax and their spontaneous growth mechanism discovered in this study may provide new insights to the self-assembly of microstructures.
36 MATERIALS SCIENCE↗
Application of Atmospheric Solids Analysis Probe Mass Spectrometry (ASAP-MS) in Petroleomics: Analysis of Condensed Aromatics Standards, Crude Oil, and Paraffinic Fraction
Atmospheric solids analysis probe mass spectrometry (ASAP-MS) is a powerful tool for analysis of solid and liquid samples. It is an excellent alternative for crude oil analysis without any sample preparation step. Here, ASAP-MS in positive ion mode, ASAP(+)-MS, has been optimized for analysis of condensed aromatics (CA) standards, crude oil, and paraffinic fraction samples using a Synapt G2-S HDMS. Initially, two methodologies were used to access the chemical composition of samples: (1) using a temperature gradient varying from 150 to 600 °C at a heating rate of 150 °C min{sup –1}, and (2) with constant temperature of 300 and 400 °C. ASAP(+)-MS ionized many compounds with a typical petroleum profile, showing a greater signals range of m/z 250–1300 and 200–1400 for crude oil and paraffin samples, respectively. Such performance, mainly related to the detection of high molecular weight compounds (>1000 Da), is superior to that of other traditional ionization sources, such as ESI, APCI, DART, and DESI. Additionally, the CA standards were identified in both forms: radicals, [M]{sup +•}, and protonated cations, [M + H]{sup +}, with minimum fragmentation. Therefore, ASAP was more efficient in accessing the chemical composition of nonpolar and polar compounds. It is promising in its application with ultrahigh resolution MS instruments, such as FT-ICR MS and Orbitrap, since molecular formulas with greater resolution and mass accuracy (<1 ppm) would be assigned. .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Shifting the Paraffin-to-Olefin Ratio and Gasoline Fuel Properties with Bimetallic BEA Zeolite Catalysts in Dimethyl Ether Homologation
Recent research on the production of HOG from DME over BEA zeolites suggests that this process offers an attractive alternative to traditional methanol-to-gasoline (MTG) technologies by operating at milder conditions and providing greater carbon efficiency 1. The HOG product is rich in branched olefins and paraffins, particularly triptane (2,2,3-trimethylbutane) which has high research- and motor-octane numbers (RON 112, MON 101), making it an ideal unleaded fuel or fuel additive for aviation or racing applications 2. RON and MON are important fuel metrics and research shows a correlation between them and paraffin and olefin content 3. Copper-modified BEA (Cu/BEA) is more active than HBEA . Research has identified that ionic Cu(I) species are active for alkane dehydrogenation whereas metallic Cu species responsible for hydrogenation chemistry 4. Here we report on the effect of including ionic Zn and Ni as a means of increasing the dehydrogenation activity of Cu/BEA in DME-to-HOG reactions. Bimetallic Cu-Zn/BEA and Cu-Ni/BEA catalysts were synthesized by first incorporating Ni or Zn by ion-exchange, followed by incipient-wetness impregnation of Cu. Similar metal loadings, acid site densities, and Bronsted/Lewis acid ratios were confirmed across all materials. All catalysts were tested in DME-to-HOG reactions with co-fed H2 at 200 degrees C and 15 psia with 1:1 DME:H-2 and DME weight-hourly space velocity of 2.2 gDME-gcat-1-h-1. Compared at similar turnover numbers (TON), Cu-Ni/BEA displayed similar activity to Cu/BEA however, exhibited greater hydrogenation activity as evidenced by the higher C5-8 P:O ratio. The Cu-Zn/BEA demonstrated decreased activity and the lowest P:O ratio, attributed to enhanced dehydrogenation activity at ionic Zn sites. For the HOG-range products (i.e., C5-8 hydrocarbon species), each catalyst had a 98-99 estimated RON, while the MON decreased with decreasing P:O ratio. Compared to Cu/BEA, these bimetallic catalysts demonstrate a unique balance of hydrogenation and dehydrogenation of the hydrocarbon products to access markedly different P:O product ratios without requiring a separate unit operation or a mixed catalyst bed.
09 BIOMASS FUELS↗
circRNA expression analysis in lung adenocarcinoma: comparison of paired fresh frozen and formalin-fixed paraffin-embedded specimens
Highlights: • First comparison of circRNA expression from paired fresh frozen and FFPE specimens. • Good correlation in circRNAs expression data utilizing fresh frozen or FFPE tissues. • Samples clustered correctly by differentially expressed circRNAs in either group. • Three differentially expressed circRNAs in lung cancers verified by qRT-PCR assay. • circRNA-miRNA-protein coding gene regulation network analyzed by bioinformatics tools. Circular RNA (circRNAs) is a novel class of endogenous non-coding RNAs which is widely involved in carcinogenesis. Archived formalin-fixed paraffin-embedded (FFPE) specimens represent valuable resources for cancer research. Currently there is a lack of systematic analysis on the feasibility of circRNAs expression analysis using FFPE samples. Here, we reported the first comparison study of circRNA expression from paired fresh frozen and FFPE specimens of lung adenocarcinoma. circRNAs expression of paired lung adenocarcinoma and adjacent normal samples, starting from either fresh frozen or FFPE materials, were analyzed via a high-throughput circRNA microarray. Hierarchical clustering was performed on samples. qRT-PCR was used to confirm the differentially expressed circRNAs. The circRNA regulation networks were built by bioinformatics tools for several candidate circRNAs. Our results demonstrated that there was a good correlation in circRNAs expression analysis utilizing fresh frozen or FFPE tissues. Tumors and adjacent normal tissues can be clustered correctly by the differentially expressed circRNAs in fresh frozen or FFPE groups. Furthermore, three differentially expressed circRNAs, hsa{sub c}ircRNA{sub 1}00421, hsa{sub c}ircRNA{sub 1}04329 and hsa{sub c}ircRNA{sub 1}01969 were verified by qRT-PCR assay. Bioinformatics analysis was also applied to predict the circRNA-miRNA-protein coding gene interaction network for each of above circRNAs. To the best of our knowledge, this is the first report demonstrating that the circRNAs microarray analysis, starting from FFPE specimens, is comparable with that based on fresh frozen samples. Therefore FFPE specimen represents a good substitute for fresh frozen tissue, especially when fresh frozen specimen is limited.
60 APPLIED LIFE SCIENCES↗
Plastic shrinkage of mortars cured with a paraffin-based compound – Bimodal neutron/X-ray tomography study
Early-age drying (immediately after casting) of mortars and the corresponding plastic shrinkage were studied using bimodal neutron/X-ray computed tomography. This novel, correlative 3D imaging mode enabled studying simultaneously and without any source of spurious perturbation the water migration and loss processes together with the corresponding deformations due to plastic shrinkage. Bimodal imaging opens up new possibilities for studying dynamic processes of coupled water transport and deformations in porous solids. The measurements were carried out on model systems (cylindrical mortar specimens with height of 19 mm). The study focused on the effect of a paraffin-based curing compound. Our results confirm that when the curing compound was applied directly onto the drying surface in a sufficient amount, both the evaporation rate and the rate of vertical displacement (settlement) were substantially reduced. The results shed a new light on the mechanisms of plastic shrinkage and the action of curing compounds.
36 MATERIALS SCIENCE↗
Thermal energy storage composites with preformed expanded graphite matrix and paraffin wax for long-term cycling stability and tailored thermal properties
Harvesting solar energy, preventing hot spots in electronics, transport of temperature-sensitive materials, and capture and repurposing of thermal energy require a latent heat thermal energy storage (TES) system to store/discharge heat repeatedly. For the practical application of phase change material (PCM) composites within TES systems, reliable thermal performance throughout its operational lifetime is essential. Nevertheless, the reliability of thermal conductivity in multi-phase composites over relevant numbers (>10 3 ) of melt/freeze cycles has barely been studied, particularly for composites containing fillers for thermal conductivity enhancement. Here, we introduce a preform-type expanded graphite (EG)/paraffin wax composite possessing highly robust heat transfer and storage properties even after 10,000 melt/freeze cycles. To achieve such excellent reliability, comparative studies on the combined influence of fabrication process, particle size, EG vol%, binder amount, and compaction on both magnitude and robustness of thermal conductivity were undertaken. Our parametric study has yielded a trade-off between thermal conductivity and latent heat. Based on our modeling, 20 vol% EG approaches the case where all EG particles are well-connected thermally while 10 vol% EG is close to loosely connected fillers in the matrix. Thermal conductivity of our paraffin composites containing 20 vol% EG (25.1 W·m -1 ·K -1 ) is highest among other EG/paraffin composites without aligned EG in the literature. After 10,000 thermal cycling, negligible conductivity fading was observed for the 10 vol% EG composite, while reduction in latent heat remained within 10% for all 10, 14, 17 and 20 vol% EG samples. Here we anticipate this work provides insight on suitable recipe for desirable magnitude and robustness of thermal conductivity of EG/paraffin composites.
25 ENERGY STORAGE↗
Protecting air/moisture-sensitive samples using perdeuterated paraffin wax for solid-state NMR experiments under magic-angle spinning
Solid-state nuclear magnetic resonance (SSNMR) spectroscopy is a powerful technique for materials characterization, yet its application to air- and moisture-sensitive materials is often hindered by the difficulty in maintaining an inert environment during magic-angle spinning (MAS). This is particularly true for fast-MAS rotors that do not generally provide tight seals. Herein, we present a generalizable approach employing perdeuterated paraffin waxes—n-icosane-d42 and c-dodecane-d24—as protective embedding media to analyze sensitive organometallic catalysts using SSNMR. We demonstrate that these waxes significantly slow oxidative degradation under MAS conditions. Weak background 1 H and 13 C NMR signals from the waxes are effectively suppressed using double-quantum filtration and cross-polarization techniques. In conclusion, these findings offer a robust method for expanding the scope of SSNMR to air-sensitive systems, with implications for the structural study of reactive materials and catalysts.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Temperature Quenching and Fluorescence Depolarization of Carbon Nanodots Obtained via Paraffin Pyrolysis
A temperature effect on fluorescence intensity and polarization of a colloidal system of carbon nanodots in glycerol under linearly polarized pumping conditions is studied. Nanodots are obtained via pyrolysis of paraffin in nanopores of a mesoporous silica. An increase in temperature leads to quenching of nanodots fluorescence, and activation energy of the quenching process is assessed. An experimental relationship between the linear fluorescence polarization and temperature is described by the Levshin–Perrin equation, which takes into account the rotational diffusion of luminescent particles (fluorophores) in a liquid matrix. The size of fluorophores is noticeably smaller than that of carbon nanodots according to the Levshin–Perrin model. A difference between the dimensions of the fluorophore and the nanodot indicates that the small atomic groups responsible for luminescence of the nanodot possess high segmental mobility.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Effect of silver($\mathrm{I}$) ion reduction on the selectivity of olefins, paraffins, and aromatic compounds by gas chromatographic stationary phases consisting of silver($\mathrm{I}$) salts in ionic liquids
We report the olefin/paraffin selectivity offered by ionic liquid (IL) stationary phases can be enhanced through the addition of silver(I) ion, which is well-known to undergo selective complexation with unsaturated compounds. However, such stationary phases often suffer from the loss of chromatographic selectivity as silver(I) ion can be reduced to elemental silver. To maintain the separation performance of silver(I) ion/IL stationary phases, an understanding of factors and conditions that promote the reduction of silver(I) ion is needed. In this study, capillary gas chromatography columns featuring a stationary phase consisting of the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C 10 MIM + ][NTf 2 - ]) IL impregnated with [Ag + ][NTf 2 - ] were examined to investigate the effects of temperature, hydrogen content in exposure gas stream, and time of heating/exposure events on olefin selectivity. Retention factors of representative analytes, such as C 6 olefins and paraffins as well as aromatic compounds, were measured after subjecting the columns to the aforementioned conditions, followed by an evaluation of selectivity factors over time. Selectivity factors of olefins and aromatic compounds were observed to decrease significantly when the stationary phases were heated to temperatures higher than 110°C as well as being subjected to mixed gas streams containing greater than 50 mol% of hydrogen. As constant column heating temperatures were applied under exposure gas mixtures containing hydrogen and nitrogen, a gradual decrease in analyte selectivity factors was observed under prolonged periods of time. However, application of a ternary gas mixture comprised of 25/50/25 mol% hydrogen/nitrogen/methane resulted in an increase in the 3-hexyne/cis-2-hexene selectivity when measured at 120°C for 60 h, due to a smaller decrease in the retention factor of 3-hexyne compared to cis-2-hexene.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Catalytic conversion of cyanobacteria-derived fatty acids to alkanes for biorenewable synthetic paraffinic kerosene
A two-step catalytic process for converting cyanobacteria-derived fatty acids to linear and branched alkanes for synthetic paraffinic kerosene was demonstrated.
Chemistry↗
Assessment of Training Performance, Degradation and Robustness of Paraffin-Wax Impregnated Nb 3 Sn Demonstrator Under High Magnetic Field
In the context of high-energy physics, the use of Nb 3 Sn superconducting magnets as a cost-effective and reliable technology depends on improvements in the following areas: long development and manufacturing cycles, conductor degradation after thermal cycling, long training, as well as a demonstration in accelerator magnets with a beam aperture of the full potential of modern Nb 3 Sn conductors. In short, performance, robustness, and cost are the three issues to be addressed. The Magnet Development project (MagDev) of the Swiss Accelerator Research and Technology initiative (CHART) at the Paul Scherrer Institute (PSI) aims to contribute to the solutions to each of these issues, re-thinking the manufacturing and design process. Here in our program, every innovation is to be validated by means of a panoply of fast-turnaround tools: from non-powered and powered samples and coils, tested under background field, to low-field subscale magnets and high field short prototypes. This work presents one element in this panoply of R&D vehicles: a stress-managed Nb 3 Sn coil called BigBOX, impregnated with paraffin wax, and tested, through a collaboration with the Magnet Development Program of the United States (US-MDP), in the background field of Brookhaven National Laboratory (BNL)’s common coils dipole DCC17.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗