Search NASA⌕ Search

SEARCH · Search NASA

Results for “PARTICLE SOURCES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Determination of Particle Sources for a Geotail Distribution Function Observed on May 23, 1995

On May 23, 1995, the Comprehensive Plasma Instrumentation (CPI) onboard the Geotail spacecraft observed a complex and structured ion distribution function near the magnetotail midplane at x approximately -10 R(sub E). On the same day, the Wind spacecraft observed a very high density (approximately 40/cubic cm) solar wind and an interplanetary magnetic field (IMF) that was predominantly northward but had several southward turnings. We have inferred the sources of the ions in this distribution function by following approximately 90,000 ion trajectories backward in time using time-dependent electric and magnetic fields obtained from a global MHD (magnetohydrodynamic) simulation. Wind data were used as input for the MHD model. We found that three sources contributed to this distribution: the ionosphere, the plasma mantle which had near-Earth and distant tail components, and the low latitude boundary layer (LLBL). Moreover, distinct structures in the low energy part of the distribution function were found to be associated with individual sources. Structures near 0 deg pitch angle were made up of either ionospheric or plasma mantle ions, while structures near 90 deg pitch angle were dominated by ions from the LLBL source. Particles that underwent nonadiabatic acceleration were numerous in the higher energy part of the ion distribution function, whereas ionospheric and LLBL ions were mostly adiabatic. A large proportion of the near-Earth mantle ions underwent adiabatic acceleration, while most of the distant mantle ions experienced nonadiabatic acceleration.

Ashour-Abdalla, M.↗
DOE OSTI2023

Systems and methods for screening particle source manufacturing and development test data

A computing system obtains test data for a particle source. The test data was generated by the particle source when the particle source was caused to emit particles. The test data comprises a first set of measurements of a first type and a second set of measurements of a second type. The computing system applies a data agnostic predictive model to the test data. The data agnostic predictive model is generated without a parametric analysis of variables of the first type and variables of the second type. The data agnostic predictive model outputs, based upon the test data, a value that is indicative of whether or not the test data is abnormal. Based upon the value, the computing system outputs an indication that the particle source was operating sub-optimally when emitting the particles.

Multari, Rosalie A.↗
DOE OSTI2020

Setting the H-mode pedestal structure: variations of particle source location using gas puff and pellet fueling

Experiments in DIII-D show that a particle source location inside the top of the H-mode pedestal (pellets) maintains a higher pedestal pressure than an edge source (gas fueling) through a widening of the electron temperature pedestal with reduction of the temperature gradient. The effect of these two fueling schemes on the H-mode pedestal structure was examined in DIII-D by comparing controlled pellet-fueled and gas-fueled discharges across a fueling scan up to 40 torr 1 s –1 . High resolution electron profiles reveal that gas fueling lowers the pedestal pressure as the density profile shifts radially outwards and the separatrix density increases, while pellet fueling maintains a constant pedestal pressure. The neutral source locations from pellets and gas are determined with the PELLET and UEDGE codes, respectively, and quantify the particle source localization. Pellets provide significant ionization inside the pedestal top while gas puffing localizes ionization in the scrape-off-layer and pedestal foot, broadly consistent with the density profile structure influenced by the source. ELMs are observed to increase in frequency and reduce impurity content as fueling is increased. Stability analysis with ELITE shows that both conditions are near the type-I ELM corner of the peeling–ballooning stability diagram, which is altered significantly by the introduction of pellets. Since transport mechanisms are not observed to change substantially with particle source location, wider pedestals allow the pellet-fueled discharges to retain higher pedestal temperatures at similar pedestal densities. EPED1 is tested to capture the pedestal pressure, under-predicting the height with pellets and over-predicting the height with gas by ~15%. Overall, these results have important implications for future reactors where pellet fueling will be the primary particle source due to an opaque scrape-off-layer by showing that the neutral source location plays a role in setting the structure of the H-mode pedestal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Plasma-based particle sources

High-brightness particle beams generated by advanced accelerator concepts have the potential to become an essential part of future accelerator technology. In particular, high-gradient accelerators can generate and rapidly accelerate particle beams to relativistic energies. The rapid acceleration and strong confining fields can minimize irreversible detrimental effects to the beam brightness that occur at low beam energies, such as emittance growth or pulse elongation caused by space charge forces. Due to the high accelerating gradients, these novel accelerators are also significantly more compact than conventional technology. Advanced accelerators can be extremely variable and are capable of generating particle beams with vastly different properties using the same driver and setup with only modest changes to the interaction parameters. So far, efforts have mainly been focused on the generation of electron beams, but there are concepts to extend the sources to generate spin-polarized electron beams or positron beams. The beam parameters of these particle sources are largely determined by the injection and subsequent acceleration processes. Although, over the last decade there has been significant progress, the sources are still lacking a sufficiently high 6-dimensional (D) phase-space density that includes small transverse emittance, small energy spread and high charge, and operation at high repetition rate. This is required for future particle colliders with a sufficiently high luminosity or for more near-term applications, such as enabling the operation of free-electron lasers (FELs) in the X-ray regime. Major research and development efforts are required to address these limitations in order to realize these approaches for a front-end injector for a future collider or next-generation light sources. In particular, this includes methods to control and manipulate the phase-space and spin degrees-of-freedom of ultrashort plasma-based electron bunches with high accuracy, and methods that increase efficiency and repetition rate. These efforts also include the development of high-resolution diagnostics, such as full 6D phase-space measurements, beam polarimetry and high-fidelity simulation tools. A further increase in beam luminosity can be achieve through emittance damping. Emittance cooling via the emission of synchrotron radiation using current technology requires kilometer-scale damping rings. For future colliders, the damping rings might be replaced by a substantially more compact plasma-based approach. Here, plasma wigglers with significantly stronger magnetic fields are used instead of permanent-magnet based wigglers to achieve similar damping performance but over a two orders of magnitude reduced length.

43 PARTICLE ACCELERATORS↗
DOE OSTI2015

Nonlinear simulations of particle source effects on edge localized mode

The effects of particle source (PS) with different intensities and located positions on Edge Localized Mode (ELM) are systematically studied with BOUT++ code. The results show the ELM size strongly decreases with increasing the PS intensity once the PS is located in the middle or bottom of the pedestal. The effects of PS on ELM depend on the located position of PS. When it is located at the top of the pedestal, peeling-ballooning (P-B) modes can extract more free energy from the pressure gradient and grow up to be a large filament at the initial crash phase and the broadening of mode spectrum can be suppressed by PS, which leads to more energy loss. When it is located in the middle or bottom of the pedestal, the extraction of free energy by P-B modes can be suppressed, and a small filament is generated. During the turbulence transport phase, the broader mode spectrum suppresses the turbulence transport when PS is located in the middle, while the zonal flow plays an important role in damping the turbulence transport when PS is located at the bottom.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2010

Installation and Characterization of Charged Particle Sources for Space Environmental Effects Testing

Charged particle sources are integral devices used by Marshall Space Flight Center s Environmental Effects Branch (EM50) in order to simulate space environments for accurate testing of materials and systems. By using these sources inside custom vacuum systems, materials can be tested to determine charging and discharging properties as well as resistance to sputter damage. This knowledge can enable scientists and engineers to choose proper materials that will not fail in harsh space environments. This paper combines the steps utilized to build a low energy electron gun (The "Skevington 3000") as well as the methods used to characterize the output of both the Skevington 3000 and a manufactured Xenon ion source. Such characterizations include beam flux, beam uniformity, and beam energy. Both sources were deemed suitable for simulating environments in future testing.

Skevington, Jennifer L.↗
DOE OSTI2018

Ice Nucleating Particle Sources at Oliktok Point Field Campaign Report

The Ice Nucleating Particle Sources at Oliktok Point U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) facility field campaign focused on chemically characterizing springtime aerosol sources at Oliktok Point, Alaska. This work was completed to improve our understanding of air masses influencing the site and altering ice nucleating particle (INP) concentrations measured by Dr. Jessie Creamean of the National Oceanic and Atmospheric Administration (NOAA) during her coordinated, simultaneous ARM field campaign “Exploratory Ice Nucleation Measurements at Oliktok”. Together these ARM field campaigns comprised INPOP (Ice Nucleating Particles at Oliktok Point). The field campaign took place at the Oliktok Point Third ARM Mobile Facility (AMF3) site from March 1 to May 31, 2017. A Davis rotating uniform motion (DRUM) impactor was deployed to collect particles for offline analysis for single-particle chemical characterization (aerosol mixing state). Barring a few interruptions due to power outages at the site, daily samples (24-h duration) were collected for analysis by computer-controlled scanning electron microscopy with energy dispersive X-ray spectroscopy (CCSEM-EDX). Unfortunately our user facility grant at the Pacific Northwest National Laboratory (PNNL) Environmental Molecular Sciences Laboratory (EMSL) was placed on hold from October 2017 to February 2018, limiting our ability to do CCSEM-EDX, as our access is also limited at the Michigan Center for Materials Characterization. Therefore, only a subset of these samples were chosen in consultation with J. Creamean and analyzed by CCSEM-EDX. We have proposed to analyze additional samples, targeting samples collected during marine air masses, as part of our DOE Atmospheric System Research (ASR) proposal “Investigating marine and terrestrial aerosol processes and cloud ice nucleation during the Alaskan Arctic melt season”. The size-resolved aerosol mixing state data produced from the ARM field campaign represent the first of such observations in the springtime at Oliktok Point. Since this AMF3 site is located within the North Slope of Alaska (NSA) oil fields near Prudhoe Bay, the site is continually influenced by combustion emissions, with natural sources also contributing to the background aerosol population.

North Slope of Alaska, Oliktok Point, aerosols, or↗
DOE OSTI2026

Towards a More Predictive Framework for Laser-Driven Particle Sources through Experimental Data-Informed Models

Laser-driven particle acceleration (LDPA) has emerged as a critical technology for high-energydensity physics applications since its discovery at Lawrence Livermore National Laboratory twenty years ago. However, realizing the full potential of these particle sources requires understanding the fundamental acceleration mechanisms and developing enhanced target designs for improved performance. This research addressed the need for controllable, high-performance laser-driven proton sources through two complementary approaches: experimentally investigating sheath field dynamics in multi-picosecond laser regimes and developing novel three-dimensional printed microstructured targets to achieve enhanced particle acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2012

Dynamic radioactive particle source

A method and apparatus for providing a timed, synchronized dynamic alpha or beta particle source for testing the response of continuous air monitors (CAMs) for airborne alpha or beta emitters is provided. The method includes providing a radioactive source; placing the radioactive source inside the detection volume of a CAM; and introducing an alpha or beta-emitting isotope while the CAM is in a normal functioning mode.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2012

Programmably structured plasma waveguide for development of table-top photon and particle sources

Programmable fabrication of longitudinal spatial structures in an optically preformed plasma waveguide in a gas jet was achieved, by using laser machining with a liquid-crystal spatial light modulator as the pattern mask. Fabrication of periodic structures with a minimal period of 200 {mu}m and density-ramp structures with a minimal slope length of 100 {mu}m was attained. The technique is useful for the optimization of various laser-plasma-based photon and particle sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2023

A multi-MeV alpha particle source via proton-boron fusion driven by a 10-GW tabletop laser

Nuclear fusion between protons and boron-11 nuclei has undergone a revival of interest thanks to the rapid progress in pulsed laser technology. Potential applications of such reaction range from controlled nuclear fusion to radiobiology and cancer therapy. A laser-driven fusion approach consists in the interaction of high-power, high-intensity pulses with H- and B-rich targets. We report on an experiment exploiting proton-boron fusion in CN-BN targets to obtain high-energy alpha particle beams (up to 5 MeV) using a very compact approach and a tabletop laser system with a peak power of ~10 GW, which can operate at high-repetition rate (up to 1 kHz). The secondary resonance in the cross section of proton-boron fusion (~150 keV in the center-of-mass frame) is exploited using a laser-based approach. The generated alpha particles are characterized in terms of energy, flux, and angular distribution using solid-state nuclear-track detectors, demonstrating a flux of ~10 5 particles per second at 10 Hz, and ~10 6 per second at 1 kHz. Hydrodynamic and particle-in-cell numerical simulations support our experimental findings. Potential impact of our approach on future spread of ultra-compact, multi-MeV alpha particle sources driven by moderate intensity (10 16 -10 17 W/cm 2 ) laser pulses is anticipated.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2016

Multi-particle inspection using associated particle sources

Disclosed herein are representative embodiments of methods, apparatus, and systems for performing combined neutron and gamma ray radiography. For example, one exemplary system comprises: a neutron source; a set of alpha particle detectors configured to detect alpha particles associated with neutrons generated by the neutron source; neutron detectors positioned to detect at least some of the neutrons generated by the neutron source; a gamma ray source; a set of verification gamma ray detectors configured to detect verification gamma rays associated with gamma rays generated by the gamma ray source; a set of gamma ray detectors configured to detect gamma rays generated by the gamma ray source; and an interrogation region located between the neutron source, the gamma ray source, the neutron detectors, and the gamma ray detectors.

42 ENGINEERING↗
DOE OSTI2015

Finite numbers of sources, particle correlations and the Color Glass Condensate

Here, we show that for a finite number of emitting sources, the Color Glass Condensate produces substantial elliptic azimuthal anisotropy, characterized by v 2 , for two and four particle correlations for momentum greater than or of the order of the saturation momentum. The flow produced has the correct semi-quantitative features to describe flow seen in the LHC experiments with p–Pb and pp collisions. This flow is induced by quantum mechanical interference between the waves of produced particles, and the flow itself is coupled to fluctuations in the positions of emitting sources. We shortly discuss generalizing these results to odd v n , to correlations involving larger number of particles, and to transverse momentum scales ΛQCD << p T << Q sat .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1974

Testing of models of VVH particle sources and propagation

For comparisons between theoretical and observed charge spectra of VVH particles to be meaningful, at least two conditions must be met. First, charge resolution must be adequate to separate important groups of nuclei, and there should be no significant systematic errors in the charge scale developed. Second, there must be adequate rejection of slower particles of smaller Z, which have been observed in several flights. Within these conditions, it has been shown that observed features of the charge spectrum are not accidents of the analysis but reflect real variations in the relative abundances that must be explained by any successful model.

Blanford, G. E., Jr.↗
NASA NTRS1972

Testing of models of VVH particle sources and propagation

For comparisons between theoretical and observed charge spectra of the VVH particles to be meaningful, at least two conditions must be met. First, charge resolution must be adequate to separate important groups of nuclei, and there should be no significant systematic errors in the charge scale developed. Second, there must be adequate rejection of slower particles of smaller Z, which have been observed in several flights. Within these conditions, it has been shown that observed features of the charge spectrum are not accidents of the analysis but reflect real variations in the relative abundances that must be explained by any successful model.

Blanford, G. E., Jr.↗
DOE OSTI2025

Bioaerosols as indicators of central Arctic ice nucleating particle sources

The Arctic is warming at a rapid rate, with implications for microbial communities as the ecosystems change. Some microbes and biogenic materials can affect the persistence of long-lived mixed-phase clouds by serving as ice nucleating particles (INPs). The presence of INPs modulates the cloud phase, and long-term measurements are important to elucidate their seasonal sources and to predict future change. The Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition in 2019–2020 provided the first year-long measurements of bioaerosols and INPs in the central Arctic, with 3 d filters for amplicon sequencing and cumulative INP concentrations from −5 to −30 °C. Here, we investigated the INP seasonal cycle and its relation to the seasonal cycle of bacteria and eukaryotes. INPs were greatly elevated and compositionally similar in summer, aligning with a greater prevalence of local bioaerosol sources, but, despite this, a diverse mixture of sources (marine and terrestrial) was present all times. A common broader Arctic INP population is hypothesized for much of the year by comparable coincident data collected in Svalbard and a sensitivity of both the INPs and bioaerosols to large-scale events.

Barry, Kevin R. [Colorado State Univ., Fort Collin↗
DOE OSTI2018

High-Activity Microscopic Nuclear-Sourced Particles to Investigate Nuclear Release Scenarios - 18026

Advances in microscopy and materials analysis have allowed for the study of materials at resolutions not previously attainable a decade ago. Such information extends to not only their existence, but also their composition, the likely source term and if applicable, their short or long-term environmental stability. This work describes the analysis undertaken on the larger 'ejecta' type of particulate collected following the INES Level 7 incident at the Fukushima Daiichi Nuclear Power Plant in March 2011. However, the methods and procedures employed during this work, on material with enormously contrasting characteristics, have far wider applications within nuclear forensics, safeguards, security and material compliance. Resulting from the analysis of micron-scale 'atmospheric' material in previous works have been able to derive information relating to the emission and subsequent transportation characteristics of the release event, as well as determining the local-scale impacts of this radioactive fallout. This analysis of the larger-scale (100's of micron) 'ejecta' material, collected from closer to the plant, has been able to reveal details pertaining to the specific in-reactor conditions at the time of the release as well as the nature of the explosion events. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗