SEARCH · Search NASA

Results for “PEO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Molecular-level Regulation of PEO-Based Electrolytes with CaF 2 Nanoparticles for Advanced Solid-State Lithium Metal Batteries

The poly(ethylene oxide) (PEO)-based electrolyte has caught much attention for its flexibility, interfacial compatibility, and low cost, but the low ionic conductivity and poor mechanical strength severely hinder its further application in solid-state batteries. Herein, a molecular level regulation through adding CaF 2 nanoparticle fillers is proposed to enhance the electrochemical performance of the PEO-based electrolyte. The strong coordination effects of the Ca cation with a Li salt anion and ether-oxygen increase the dissociated Li ion concentration and accelerate Li ion migration, thus enhancing the ionic conductivity of the electrolyte when combined with their physical disruption in the PEO matrix (0.31 mS cm -1 at 55 °C). Moreover, the spontaneous reaction between Li and CaF 2 generates a LiF-rich solid electrolyte interphase, which promotes homogeneous Li deposition. Consequently, the PEO-CaF 2 electrolyte delivers symmetric cells over 6300 h and maintains full batteries over 1000 cycles with 80% capacity retention. In conclusion, the assembled pouch-cell displays robust performance, further demonstrating its potential practical application.

Li, Tao [Lanzhou Univ. (China)] (ORCID:00000003196↗

DOE OSTI2024

Crystallization of Bottlebrush Statistical Copolymers of Polystyrene and Poly(ethylene oxide)

Here, bottlebrush statistical copolymers (BSCPs) with poly(ethylene oxide) (PEO) and polystyrene (PS) side chains grafted to a polynorbornene (PNB) backbone were synthesized by ring-opening metathesis polymerization (ROMP). The impact of the glassy PS side chains on the crystallization of the PEO side chains as a function of the backbone length, grafting densities, and fraction of the PS and PEO side chains is described. The bottlebrush architecture, where the side chains are anchored to the backbone, inherently constrains the mobility of PEO. Compared with the bulk crystallization temperature of PEO, the higher glass transition temperature of PS places further constraints on PEO crystallization. The limited mobility of PEO leads to cold crystallization behavior during heating. Reduced grafting densities, in turn, reduce side-chain crowding, leading to less extended pendant structures. The degree of crystallinity of PEO was found to decrease at lower grafting densities to a point where crystallization was not observed. The average distance between bottlebrush backbones increased linearly with the backbone length, suggesting that the backbone forms a distinct mesodomain. For BSCPs with asymmetric volume fractions of PS and PEO side chains, the degree of crystallinity of PEO increases with a change from cold crystallization to normal nucleation and growth during cooling, as a result of reduced constraints on PEO mobility by the glassy PS side chains.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Backbone Stitching in Bottlebrush Copolymer Mesodomains and the Impact of Side Chain Crystallization

We synthesized bottlebrush statistical copolymers (BSCPs) having poly(ethylene oxide) (PEO) and poly(dimethylsiloxane) (PDMS) side chains attached to a polynorbornene backbone. Small-angle X-ray scattering analysis showed that for densely grafted BSCPs, the scattering length density gradually transitions between the PEO and PDMS domains. For loosely grafted BSCPs, the polymer backbone formed a distinct mesodomain, with a lower electron and mass density than both the PEO and PDMS domains. The bottlebrush backbone essentially “stitches” the PEO and PDMS side chains, looping back and forth from the PEO to PDMS domains with the backbone segments oriented normal to the domain interfaces. Self-consistent field theory (SCFT) calculations validated the stitching of the backbone driven by the microphase separation of PEO and PDMS, along with a strong segmental order of the side chains in the melt. The reduced birefringence upon PEO crystallization suggests the disruption of the strong segmental order by the crystallization. Both the static intrinsic and the form birefringences of the BSCPs decreased upon PEO crystallization. Solid-state NMR confirmed the rigidity of PEO crystallites and the bottlebrush backbone. Self-assembly of BSCPs containing polyhedral oligomeric silsesquioxane (POSS) pendent groups was also evaluated by X-ray scattering, showing the formation of lamellar microdomains that inhibited POSS crystallization.

Hu, Mingqiu↗

DOE OSTI2026

Establishing the Stability of Cross-Linked Poly(ethylene oxide) Blended with Poly(pentyl malonate) against Lithium Metal Anodes

This work focuses on an electrolyte obtained by infusing linear poly(pentyl malonate) (PPM) chains into cross-linked poly(ethylene oxide) (PEO). A lithium salt is added to enable ion transport. Obtaining this electrolyte is only possible because PPM is miscible with PEO irrespective of salt concentration. The properties of this electrolyte are compared against two benchmarks: an electrolyte obtained by infusing linear PEO into cross-linked PEO and cross-linked PEO with no added linear polymer. Measurements of storage moduli and ion transport efficacies are found to be similar across the three electrolytes, suggesting similar stability behavior against lithium metal anodes, based on current theoretical models. Instead, the PPM infused electrolyte outperforms the other two electrolytes. In the cycling tests, the current supported by the PPM infused electrolyte was a factor of 20 higher than that of the PEO infused electrolyte and a factor of 4 higher than that of the cross-linked PEO electrolyte. In the unidirectional plating experiments, the other two electrolytes fail after about 4 h or less, while the PPM containing electrolyte did not fail during the 140 h testing period. Insight into the nature of failure modes was obtained using synchrotron hard X-ray microtomography.

Gido, Lily [University of California, Berkeley]↗

DOE OSTI2026

Upcycling waste PET into functional multiblock copolymers through controlled macromolecular design

Poly(ethylene terephthalate) (PET) oligomers derived from glycolysis depolymerization were converted into multiblock copolymers through diisocyanate-mediated coupling with dihydroxy-terminated oligomers, enabling precise control over copolymer sequence distribution, connectivity, and mechanical performance. Here, we demonstrate that telechelic PET oligomers isolated directly from depolymerized consumer waste can serve as reactive building blocks for the formation of segmented multiblock copolymers, eliminating the need to revert to monomeric feedstocks. Dihydroxy-terminated PET oligomers (Mw ≈ 8 kg mol−1) were coupled with poly(ethylene oxide) (PEO, Mw ≈ 4 kg mol−1) to form PET-PEO multiblock copolymers with high molar mass (Mw ≈ 160 kg mol−1). We further show that the timing of end-capping reactions provides a key control parameter that governs the competition between chain extension and termination, thereby dictating the resulting multiblock architecture and molecular-weight evolution. Evaluation of their mechanical properties reveals that virgin PET exhibits high modulus (∼3 GPa) and strength (43 MPa) but limited ductility (<10% elongation). In contrast, PET–PEO multiblock copolymers retain comparable tensile strength (44 MPa), albeit while exhibiting dramatically enhanced ductility (>90% elongation), forming tougher materials with efficient stress transfer between the rigid PET domains and the flexible PEO segments. When incorporated into PET/PEO blends at low loadings, the multiblock copolymers serve as effective compatibilizers, yielding materials with an intermediate modulus (1.1–1.2 GPa) and improved elongation compared to uncompatibilized blends. Furthermore, the presence of PEO blocks increases water uptake and gas permeability relative to virgin PET, reflecting the tunability of molecular transport through the copolymeric blocks. To our knowledge, this represents the first report of PET–PEO multiblock copolymers derived from post-consumer PET for gas transport applications. These results demonstrate that multiblock copolymer formation from telechelic PET oligomers provides a versatile platform for tailoring the mechanical and transport behavior of polyester-based materials through controlled macromolecular design and establishes a generalizable strategy for transforming consumer plastic waste into functional segmented polymers without requiring complete depolymerization to monomers.

Watson-Sanders, Shelby [Department of Chemistry, U↗

DOE OSTI2025

Confocal Raman Microscopy for Measuring In Situ Temperature-Dependent Structural Changes in Poly(Ethylene Oxide) Thin Films

Crystallization from the melt is a critical process governing the properties of semi-crystalline polymeric materials. While structural analyses of melting and crystallization transitions in bulk polymers have been widely reported, in contrast, those in thin polymer films on solid supports have been underexplored. Herein, in situ Raman microscopy and self-modeling curve resolution (SMCR) analysis are applied to investigate the temperature-dependent structural changes in poly(ethylene oxide) (PEO) films during melting and crystallization phase transitions. By resolving complex overlapping sets of spectra, SMCR analysis reveals that the thermal transitions of 50 µm thick PEO films comprise two structural phases: an ordered crystalline phase and a disordered amorphous phase. The ordered structure of the crystalline PEO film entirely disappears as the polymer is heated; conversely, the disordered structure of the amorphous PEO film reverts to the ordered structure as the polymer is cooled. Broadening of the Raman bands was observed in PEO films above the melting temperature (67 °C), while sharpening of bands was observed below the crystallization temperature (45 °C). The temperatures at which these spectral changes occurred were in good agreement with differential scanning calorimetry (DSC) measurements, especially during the melting transition. The results illustrate that in situ Raman microscopy coupled with SMCR analysis is a powerful approach for unraveling complex structural changes in thin polymer films during melting and crystallization processes. Furthermore, we show that confocal Raman microscopy opens opportunities to apply the methodology to interrogate the structural features of PEO or other surface-supported polymer films as thin as 2 µm, a thickness regime beyond the reach of conventional thermal analysis techniques.

Koh, Miharu [Department of Chemistry, University o↗

DOE OSTI2025

Achieving Electrode Smoothing by Controlling the Nucleation Phase of Metal Deposition Through Polymer‐Substrate Binding

Polymer additives [like polyethylene oxide (PEO)] are widely used for smooth electrode deposition in aqueous zinc and many other battery systems. However, the precise mechanism by which they regulate morphology and suppress dendrite formation remains unclear. In this study, the knowledge gap is addressed by using in situ electrochemical atomic force microscopy to directly observe the interfacial evolution during Zn electrodeposition and polymer adsorption on Cu substrates in the presence of varying concentrations of ZnSO 4 and PEO. Contrary to previous literature assumptions, which emphasize the binding to the growing Zn crystal surfaces or Zn 2+ ions, the results demonstrate that PEO smooths Zn films by promoting nucleation of (002)-oriented Zn platelets through interactions with the Cu substrate. Density functional theory simulations support this finding by showing that PEO adsorption on Cu modifies the interfacial energy of Zn/Cu/electrolyte interfaces, favoring the stabilization of Zn (002) on the Cu substrate, as well as confines Zn electrodeposition to a narrow near-surface region. In conclusion, these findings elucidate a novel design principle for electrode smoothing, emphasizing the importance of substrate selection paired with polymer additives that exhibit an attractive interaction with the substrate but minimal interaction with growing crystals, offering a mechanistic perspective for improved battery performance.

Electrodeposition↗

DOE OSTI2024

Engineering a biopolymer for vascular embolization based on fundamental polymer principals

Herein we describe the engineering of a potential polymer substitute to metal coils for achieving vascular embolization. Our system is based on a methacrylate end-functionalized polyethylene oxide-polypropylene oxide-polyethylene oxide (PEO-PPO-PEO) triblock copolymer which displays thermal-reversible gelation properties and FCC ordering of the original copolymer while also being able to chemically crosslink. This system shows injectability, two-step gelation, chemical crosslinking with a five-fold increase in modulus and is highly resistant to washout under physiological flow conditions. Furthermore, we show that exposure to aqueous flow imparts resistance to swelling where less than 10 % swelling was observed under physiological flow as opposed to more than 60 % under static conditions after 30 days. Auxiliary experiments with PEO-PPO-PEO copolymers of various molecular weights indicate that this phenomenon may possibly be attributed to entanglements known to occur between adjacent micelles, where the reptation time, the time for polymer disentanglement, is long compared to the flow rate.

36 MATERIALS SCIENCE↗

DOE OSTI2026

A structural and electrochemical study of perfluoropolyether-poly(ethylene oxide) solid polymer electrolytes

Solid polymer electrolytes offer attractive safety, processability, and interfacial adhesion for enabling high–energy solid-state lithium batteries, but they are often limited by narrow oxidative stability windows and low lithium-ion transference numbers. In an attempt to broaden the electrochemical stability window and increase lithium-ion transference number of poly(ethylene oxide) (PEO)-based solid polymer electrolytes, we produce an optically clear, crosslinked membrane of PEO and perfluoropolyether (PFPE) using a mixed solvent method and subsequently infuse the membrane with a lithium salt. Structural and thermal analyses reveal nanoscale phase separation between fluorocarbon and hydrocarbon domains with characteristic spacings of 7–8 nm and an elevated glass transition for the hydrocarbon phase. Consistent with this, PFPE-containing membranes exhibit substantially lower ionic conductivity than PEO analogs (dry and plasticized). The transference number and electrochemical stability are similar to pure PEO. These results demonstrate that fluorination implemented as segregated nanoscale domains does not deliver the anticipated transport or stability benefits; instead, phase separation increases tortuosity and suppresses hydrocarbon-phase dynamics. The work underscores the importance of fluorine placement and morphology control, guiding the design of partially fluorinated solid polymer electrolytes toward architectures that avoid detrimental nanoscale phase separation.

Carden, Peyton [ORNL] (ORCID:0000000162296538)↗

DOE OSTI2026

Tunable Nanoscale Structure via Divalent Ion Identity in Charged-Neutral Polymer Blends

Charged-neutral polymer blends, wherein an ioncontaining polymer is blended with a neutral polymer, are potential candidates for battery electrolytes due to their improved ion transport properties and electrochemical stability. Though electrostatic interactions in charged polymer blends can theoretically stabilize ordered nanostructures analogous to those observed in neutral block copolymers, direct experimental evidence remains limited. Here, we investigate the effects of divalent cation identity on the nanoscale morphology of charged-neutral polymer blends composed of poly(ethylene oxide) (PEO) and Mg 2+ or Ca 2+ ioncontaining polymers, poly[3-(methylacryloxy)propylsulfonyl-1-(trifluoromethanesulfonylimide)] (P(Mg(MTFSI) 2 ) or P(Ca- (MTFSI) 2 ). By tuning the size of the divalent counterion, we are able to precisely tune the ion solvation between the free cation and PEO, which acts as a solvent in this system. Differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS) measurements reveal that Mg 2+ and Ca 2+ ions induce distinct structural behavior. In both systems, the blends become more miscible as the concentration of ion-containing polymer is increased indicated by increased suppression of PEO crystallinity. At the highest concentrations of P(Mg(MTFSI) 2 ), the blends undergo microphase separation and generate nanostructures with shortranged ordering. In contrast, calcium ions, which are more readily solvated by PEO, produce more homogeneous blends characterized by a single glass-transition temperature and featureless SAXS data. The results demonstrate the novel experimental confirmation that charged-neutral polymer blends can undergo microphase separation and show that counterion identity can be exploited as a design parameter to control nanoscale morphology.

Ions↗

DOE OSTI2025

Improved interfacial li-ion transport in composite polymer electrolytes via surface modification of LLZO

Composite polymer electrolytes that incorporate ceramic fillers in a polymer matrix offer mechanical strength and flexibility as solid electrolytes for lithium metal batteries. However, fast Li + transport between polymer and Li + -conductive filler phases is not a simple achievement due to high barriers for Li + exchange across the interphase. This study demonstrates how modification of Li 7 La 3 Zr 2 O 12 (LLZO) nanofiller surfaces with silane chemistries influences Li + transport at local and global electrolyte scales. Anhydrous reactions covalently link amine-functionalized silanes [(3-aminopropyl)triethoxysilane (APTES)] to LLZO nanoparticles, which protects LLZO in air. APTES functionalization lowers the poly (ethylene oxide) (PEO)-LLZO interphase resistance to half that of unmodified LLZO and increases effective Li + transference number, while insulating Al 2 O 3 completely blocks ion exchange and lowers transference number and conductivity in PEO-lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-LLZO composites. Modeling an inner resistive interphase between LLZO and PEO surrounded by an outer conductive interphase explains non-linear conductivity trends. Solid-state 7 Li & 6 Li nuclear magnetic resonance shows Li + only exchanges between PEO-LiTFSI and some LLZO interphase, with no appreciable Li + transport through bulk LLZO. Surface functionalization is a promising path toward lowering the polymer-ceramic interphase resistance. This work demonstrates that local changes in Li + transport affect macroscopic performance, highlighting the intricate relationships between all interfaces in inherently heterogeneous composite polymer electrolytes.

25 ENERGY STORAGE↗

DOE OSTI2024

Polysilaketals: High‐Performance Polyether‐Based Electrolytes with Tunable Disubstituted Silane Linkers

Abstract Polymer electrolytes exhibit higher energy density and improved safety in lithium‐ion batteries relative to traditionally used liquid electrolytes but are currently limited by their lower electrochemical performance. Aiming to access polymer electrolytes with competitive electrochemical properties, we developed the anionic ring‐opening polymerization (AROP) of cyclic silaketals to synthesize amorphous silicon‐containing polyether‐based electrolytes with varying substituent bulk of the general formula [OSi(R) 2 (CH 2 CH 2 O) 2 ] n (R=alkyl, phenyl). As opposed to previously reported uncontrolled polycondensation routes toward low molecular weight polysilaketals, AROP allows access to targeted molecular weights above the entanglement threshold of the polymers. The polysilaketal with the lowest steric bulk (P(OSi Me,Me ‐2EO)) exceeds the conductivity of poly(ethylene oxide) (PEO), a leading polymer electrolyte. To the best of our knowledge, this is the first solid polymer electrolyte to achieve this benchmark. Steric bulk in polysilaketals was found to impart stability and two bulkier polysilaketals, P(OSi Et,Et ‐2EO) and P(OSi Me,Ph ‐2EO), exhibited higher current fractions than PEO over a wide range of salt loadings. Moreover, the efficacy of P(OSi Et,Et ‐2EO) was competitive with that of PEO. Taken together, the tunable and competitive electrochemical properties of polysilaketals validate the systematic incorporation of silyl groups as a strategy to access high performance polymer electrolytes.

Rugh, Haley J.↗

DOE OSTI2025

Polysilaketals: High‐Performance Polyether‐Based Electrolytes with Tunable Disubstituted Silane Linkers

Polymer electrolytes exhibit higher energy density and improved safety in lithium-ion batteries relative to traditionally used liquid electrolytes but are currently limited by their lower electrochemical performance. Aiming to access polymer electrolytes with competitive electrochemical properties, we developed the anionic ring-opening polymerization (AROP) of cyclic silaketals to synthesize amorphous silicon-containing polyether-based electrolytes with varying substituent bulk of the general formula [OSi(R)2(CH2CH2O)2]n (R=alkyl, phenyl). As opposed to previously reported uncontrolled polycondensation routes toward low molecular weight polysilaketals, AROP allows access to targeted molecular weights above the entanglement threshold of the polymers. The polysilaketal with the lowest steric bulk (P(OSiMe,Me-2EO)) exceeds the conductivity of poly(ethylene oxide) (PEO), a leading polymer electrolyte. To the best of our knowledge, this is the first solid polymer electrolyte to achieve this benchmark. Steric bulk in polysilaketals was found to impart stability and two bulkier polysilaketals, P(OSiEt,Et-2EO) and P(OSiMe,Ph-2EO), exhibited higher current fractions than PEO over a wide range of salt loadings. Moreover, the efficacy of P(OSiEt,Et-2EO) was competitive with that of PEO. Taken together, the tunable and competitive electrochemical properties of polysilaketals validate the systematic incorporation of silyl groups as a strategy to access high performance polymer electrolytes.

Rugh, Haley J↗

DOE OSTI2025

Solvation governs cation transference in glyme-based lithium battery electrolytes

The efficacy of electrochemical systems is governed by the cation transference number, which represents the fraction of current carried by the working ion. Energy is wasted when field-induced motion also drives anions and solvent molecules, decreasing the transference number to near-zero. We present a systematic study of cation transference in a series of electrolytes: tetraglyme (TG), octaglyme (OG), and poly(ethylene oxide) (PEO) mixed with lithium bis(trifluoromethanesulfonyl)imide. In all three electrolytes, starting from the dilute salt concentration limit, the experimentally measured cation transference number decreases with increasing concentration, reaching a minimum between -0.1 and -0.2, before rising back to positive values. Explicit measurements of field-induced species' velocities by electrophoretic nuclear magnetic resonance indicate that negative cation transference numbers in TG and OG electrolytes are dictated by solvation interactions with minimal contribution from anion-cation interactions. Simulation-based solvation structures indicate that OG serves as a bridge between TG and PEO. Multi-charge positive clusters, which are negligible in TG, become increasingly important at higher chain lengths (OG and PEO). As migrating cations drag their solvation shells, this solvation-induced motion is amplified in glyme electrolytes because of covalent interactions between solvating glyme molecules and free glyme molecules.

Im, Julia↗

DOE OSTI2025

Minimal implicit-solvent coarse-grained simulation of Pluronic block copolymers with ionic liquids

Pluronic block copolymers, composed of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) in a triblock structure (PEO–PPO–PEO), are well known for their amphiphilic character and ability to self‐assemble into micelles in aqueous solution. The addition of ionic liquids (ILs) can further modulate the core–shell structures of these copolymers, influencing their stability, critical micellization temperature, and size. However, fully atomistic simulations often become prohibitively expensive due to the size and complexity of these systems. In this work, coarse‐grained simulations using a minimal implicit‐solvent model were performed to examine how two classes of ILs, namely, 1‐alkyl‐3‐methylimidazolium ([C n C 1 im]) and 1‐alkyl‐3‐methylpyrrolidinium ([C n C 1 pyrr]), change the micellization of Pluronic block copolymers in aqueous solution. The effects of IL concentration and alkyl group length were investigated, and the model greatly improved the efficiency of simulating large‐scale micelle systems. Furthermore, the numerical simulations are qualitatively compared with experimental investigations. Our results show that adding ILs expands the micelle core by embedding IL tails among the PPO blocks, thereby increasing overall micelle size. Less polar ILs generally induce more pronounced micellar growth. However, the effect of IL tail length on conformation and micellar packing is non‐monotonic. Up to moderate chain lengths (around C8–C10), the IL tails can extend sufficiently to increase local separation within the micelle; at longer tail lengths, enhanced hydrophobic clustering and steric hindrance cause the tails to bend or fold, capping further expansion. In addition, although block copolymer chains tend to pack more closely in the presence of longer‐tailed ILs, the random coil size of an individual polymer chain does not necessarily shrink. Meanwhile, these insights provide a deeper understanding of how Pluronic/IL systems interact, informing applications in drug delivery, cosmetics, food, and environmental engineering. Finally, our minimal implicit‐solvent model can be applied to larger systems and longer timescales, substantially reducing computational cost while reproducing key structural trends observed experimentally.

Atomistic simulations↗

DOE OSTI2026

Impact of Salt Chemistry and Interlayer Architecture on Solid Electrolyte Interphase Composition and Performance

Reversible lithium metal anodes require interphases that are chemically stable, mechanically robust, and compatible with scalable processing. Here, we use slot-die-coated, salt-rich PEO interlayers to design SEI nanolayers on Cu current collectors and isolate how salt anion chemistry controls interphase composition and lithium plating/stripping behavior in architectures relevant to Li plating and anode-free cells. Mesoscale modeling shows that dendrite initiation at SEI defects is governed by a tradeoff among interphase thickness, ionic conductivity, and stiffness through defect-driven current focusing, motivating controlled formation from thin precursor layers. Using UHV-transferred XPS and ToF-SIMS depth profiling after controlled Li deposition, we find that fluorinated sulfonylimide salts (LiTFSI, LiFSI) form mixed inorganic/organic interphases containing LiF and PEO-derived alkoxides, with LiFSI producing a more LiF-dominant Li-facing surface than LiTFSI under identical conditions. In contrast, LiNO 3 -containing interlayers yield a comparatively thick nitrate-derived interphase that reduces upon Li contact to an N-rich inorganic layer (Li–N/N 3− , LiN x O y ). In Cu| |Li cells, these designed interlayers reduce interfacial resistance and improve Coulombic efficiency (CE) and critical current density (CCD) relative to uncoated controls, with LiFSI- and LiNO 3 -based interlayers providing the highest CE/CCD. Overall, the results demonstrate a manufacturing-relevant approach to engineer SEI nanolayers by salt chemistry, providing pathways to improve reversible lithium metal anodes while reducing reliance on LiTFSI.

anion chemistry↗

DOE OSTI2026

Particle‐Size‐Dependent Lithium‐Ion Transport in PEO/LLZO Composite Electrolytes

Lithium-metal batteries with solid electrolytes can deliver higher energy density and improved safety than conventional Li-ion batteries. Among solid electrolyte candidates, polymer/ceramic composite electrolytes are attractive because they combine polymer flexibility with the high ionic conductivity of ceramics. However, whether ceramic fillers synergistically reduce polarization losses in the polymer matrix remains unclear. A central unknown is the critical polymer/ceramic interfacial resistance (Rint,crit), below which adding ceramics lowers electrolyte overpotential. Here, we present the first macroscale model framework to quantify R int,crit for composite electrolytes based on polyethylene oxide (PEO) and Ta-doped Li 7 La 3 Zr 2 O 12 (LLZO). A 1D model for DC-polarization of tri-layer cells (PEO-LiTFSI/LLZO/PEO-LiTFSI) shows that LLZO surface functionalization reduces the PEO/LLZO interfacial resistance, consistent with electrochemical impedance measurements. Extending to a 2D composite model, we show notably that Rint,crit scales linearly with LLZO particle diameter and shifts toward experimentally accessible values (e.g., 28.8 Ωcm 2 ) as particle size increases. At fixed ceramic volume fraction, larger LLZO particles reduce the number of interfacial crossings, driving more current through the ceramic phase and lowering concentration polarization. In contrast, R int,crit is largely independent of ceramic volume fraction. These results demonstrate that ceramic filler-size engineering can enable synergistic, energy-efficient transport in polymer/ceramic composite electrolytes.

25 ENERGY STORAGE↗

DOE OSTI2025

Halide perovskite-polymer composite film for bright and stable light-emitting devices

Stability is the primary hindrance for the application of halide perovskite material in light-emitting devices, solar cells, and other devices. In this work, halide perovskite and polymer composite film have been prepared for stable and bright light-emitting devices. Pure-phase Cs4PbBr6 crystals have been synthesized, and their photoluminescence (PL) properties and fluorescence lifetimes have been investigated. The Cs 4 PbBr 6 crystals exhibited high uniformity but underwent rapid photodegradation under light irradiation. To address this issue, we prepared bright light-emitting devices using composite of Cs 4 PbBr 6 crystals and polyethylene oxide (PEO) as the emission layer. The aim was to improve the optical and physical properties of halide perovskites, such as photodegradation and stability. PEO, with its excellent film-forming ability, created a uniform and dense film on the halide perovskite surface, filling microscopic defects and providing a protective barrier. FTIR, morphology, and PL analyses confirmed the protective role of the halide perovskite and polymer composite film. The composite film light-emitting devices demonstrated improved stability and higher PL brightness, with a peak brightness approaching 3 × 10 8 cd/m 2 , which was approximately 75% higher than the pure halide perovskite devices.

Composite film↗