Search NASA⌕ Search

SEARCH · Search NASA

Results for “PH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Aqueous aggregation behavior of citric acid coated magnetite nanoparticles: Effects of pH, cations, anions, and humic acid

Highlights: • Citric acid (CA) coatings greatly enhanced the stability of MNPs at pH = 5–9. • Stability of CA-MNPs increased with pH increase due to CA deprotonation. • The valence and adsorption of ions affected the surface charge of CA-MNPs. • The aggregation behaviors of CA-MNPs agreed with DLVO predictions. Improving the colloidal stability of magnetite nanoparticles (MNPs) is essential for their successful applications. In this study, the surface zeta potential and particle size evolutions of citric acid coated magnetite nanoparticles (CA-MNPs) were measured under varied aqueous conditions using dynamic light scattering (DLS). The effects of pH (5.0–9.0), ionic strength (IS), cations (Na{sup +} and Ca{sup 2+}), anions (phosphate, sulfate, and chloride) and humic acid on the aggregation behaviors of CA-MNPs were explored. Compared with bare MNPs, the stability of CA-MNPs were greatly improved over the typical pH range of natural aquatic environments (pH = 5.0–9.0), as the coated CA-MNPs were highly negatively charged over the pH range due to the low pK{sub a1} value (3.13) of citrate acid. CA-MNPs were more stable in the presence of monovalent cation (Na{sup +}) compared with divalent cation (Ca{sup 2+}), as Ca{sup 2+} could neutralize the surface charge of MNPs more significantly than Na{sup +}. In the presence of anions, the surface charges of CA-MNPs became more negative, and the stability of CA-MNPs followed the order: in phosphate > sulfate > chloride. The observed aggregation trend could be explained by the differences in the valences of the anions and their adsorption behaviors onto CA-MNPs, which altered the surface charges of CA-MNPs. The measured critical coagulation concentrations (CCC) values of CA-MNPs in these electrolyte solutions agreed well with Derjaguin–Landau–Verwey–Overbeek (DLVO) calculations. With the addition of Humic acid (HA), the aggregation of CA-MNPs was inhibited in all electrolyte solutions even with the critical coagulation concentrations. This is due to the adsorption of HA onto CA-MNPs, which enhanced the electrostatic and steric repulsive forces between CA-MNPs. Considering the good stability of CA-MNPs in solutions with varied pH and electrolyte compositions, as well as with the easy synthesis of CA-MNPs and their non-toxicity, this study suggested CA coating as a good strategy to increase the stability of MNPs.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Synthesis and structures of zirconium complexes [Et{sub 2}H{sub 2}N]{sup +}{sub 2}[ZrCl{sub 6}]{sup 2–}, [Me{sub 3}NCH{sub 2}Ph]{sup +}{sub 2}[ZrCl{sub 6}]{sup 2–}•MeCN, [Ph{sub 3}PC{sub 6}H{sub 4}(CHPh{sub 2}-4)]{sup +}{sub 2}[ZrCl{sub 6}]{sup 2–}•2 MeCN, and [Ph{sub 4}Sb]{sup +}{sub 2}[ZrCl{sub 6}]{sup 2–}

The complexes [Et{sub 2}H{sub 2}N]{sup +}{sub 2}[ZrCl{sub 6}]{sup 2–} (1), [Me{sub 3}NCH{sub 2}Ph]{sup +}{sub 2}[ZrCl{sub 6}]{sup 2–}•MeCN (2), [Ph{sub 3}PC{sub 6}H{sub 4}(CHPh{sub 2}-4)]{sup +}{sub 2}[ZrCl{sub 6}]{sup 2–}•2 MeCN (3), and [Ph{sub 4}Sb]{sup +}{sub 2}[ZrCl{sub 6}]{sup 2–} (4) were synthesized by the reaction of zirconium tetrachloride with tetraorganylammonium, -phosphonium, and -stibonium chlorides in acetonitrile and structurally characterized. The nitrogen, phosphorus, and antimony atoms in the cations have a distorted tetrahedral geometry. The Zr–Cl distances in the centrosymmetric octahedral [ZrCl{sub 6}]{sup 2−} anions of complexes 1–4 have similar values, the longest bonds being observed in the anion of complex 4. Acetonitrile molecules are involved in the structural organization of the crystals of complex 3via weak hydrogen bonding with phenyl hydrogen atoms of the organylphosphonium cations. In the crystal of 2, no hydrogen bonds between the cations and solvent molecules are observed; acetonitrile molecules fill the cavities formed by cations and anions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Real-Time Automated pH Control within Batch Processes Relying on Raman pH Measurement

Nuclear fission is an energy source that can provide consistent power with very low associated carbon emissions. However, management of the used nuclear fuel is an important aspect of the application of nuclear power. Recycling of useful components from used fuel is an attractive option, but this involves chemical processing of the fuel. Possible chemical separation technologies that might be used in this regard are sensitive to solution pH. Raman spectroscopy is a promising technique for monitoring the pH of solutions in real time. Classical pH probes are too fragile to be used in the harsh environments encountered in nuclear fuel processing. Raman probes are robust and can withstand these harsh environments to track pH. Coupled with chemometric analysis, the demonstration of the use of Raman spectroscopy to track and predict the pH in carboxylate-buffered systems is made possible. Utilizing this spectroscopy in conjunction with Programmable Logic Controllers mimics industrial control systems used in many modern industrial settings. This showcases a pragmatic approach toward leveraging Raman spectroscopy and chemometric model outputs as inputs for a real-time control system. The model to predict pH created by chemometrics proved to be successful in tracking pH. The optimal pH for TALSPEAK extraction of lanthanides and actinides from aqueous solution is known to proceed in a narrow pH range of around pH = 2.8 ± 0.1. This study uses Raman optical monitoring and automated control to return and maintain solution pH within this range after acid or base perturbations move the solution pH well outside this region. Root-mean-square errors show that pH changes measured using Raman spectroscopy on the batch process solution are reliably measured and used to automatically correct and maintain solution pH. Measurement of solution pH tracks favorably with electrochemical pH probe comparison measurements. As a result, the ability to showcase Raman spectroscopy paired with chemometrics analysis acts as a durable, better alternative data source compared to traditional pH probes to optimize the separation efficiency in the used nuclear fuel processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Simulations of aerosol pH in China using WRF-Chem (v4.0): sensitivities of aerosol pH and its temporal variations during haze episodes

Aerosol pH is a fundamental property of aerosols in terms of atmospheric chemistry and its impact on air quality, climate, and health. Precise estimation of aerosol pH in chemical transport models (CTMs) is critical for aerosol modeling and thus influences policy development that partially relies on results from model simulations. We report the Weather Research and Forecasting Model coupled with Chemistry (WRF-Chem) simulated PM 2.5 pH over China during a period with heavy haze episodes in Beijing, and explore the sensitivity of the modeled aerosol pH to factors including emissions of nonvolatile cations (NVCs) and NH 3 , aerosol phase state assumption, and heterogeneous production of sulfate. We find that default WRF-Chem could predict spatial patterns of PM 2.5 pH over China similar to other CTMs, but with generally lower pH values, largely due to the underestimation of alkaline species (NVCs and NH 3 ) and the difference in thermodynamic treatments between different models. Increasing NH 3 emissions in the model would improve the modeled pH in comparison with offline thermodynamic model calculations of pH constrained by observations. In addition, we find that the aerosol phase state assumption and heterogeneous sulfate production are important in aerosol pH predictions for regions with low relative humidity (RH) and high anthropogenic SO 2 emissions, respectively. These factors should be better constrained in model simulations of aerosol pH in the future. Analysis of the modeled temporal trend of PM 2.5 pH in Beijing over a haze episode reveals a clear decrease in pH from 5.2 ± 0.9 in a clean period to 3.6 ± 0.5 in a heavily polluted period. The increased acidity under more polluted conditions is largely due to the formation and accumulation of secondary species including sulfuric acid and nitric acid, even though being modified by alkaline species (NVCs, NH 3 ). Our result suggests that NO 2 oxidation is unlikely to be important for heterogeneous sulfate production during the Beijing haze as the effective pH for NO 2 oxidation of S(IV) is at a higher pH of ~6.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

General Kinetic Model for pH Dependence of Proton-Coupled Electron Transfer: Application to an Electrochemical Water Oxidation System

The pH dependence of proton-coupled electron transfer (PCET) reactions, which are critical to many chemical and biological processes, is a powerful probe for elucidating their fundamental mechanisms. Herein, a general, multichannel kinetic model is introduced to describe the pH dependence of both homogeneous and electrochemical PCET reactions. According to this model, a weak pH dependence can arise from the competition among multiple sequential and concerted PCET channels involving different forms of the redox species, such as protonated and deprotonated forms, as well as different proton donors and acceptors. The contribution of each channel is influenced by the relative populations of the reactant species, which often depend strongly on pH, leading to complex pH dependence of PCET apparent rate constants. This model is used to explain the origins of the experimentally observed weak pH dependence of the electrochemical PCET apparent rate constant for a ruthenium-based water oxidation catalyst attached to a tin-doped In2O3 (ITO) surface. The weak pH dependence is found to arise from the intrinsic differences in the rate constants of participating channels and the dependence of their relative contributions on pH. This model predicts that the apparent maximum rate constant will become pH-independent at higher pH, which is confirmed by experimental measurements. Our analysis also suggests that the dominant channels are electron transfer at lower pH and sequential PCET via electron transfer followed by fast proton transfer at higher pH. Furthermore, this work highlights the importance of considering multiple competing channels simultaneously for PCET processes.

Catalysts↗
DOE OSTI2018

pH-Dependent Interactions between Keggin Heteropolyanions in Dilute Solutions: pH-Dependent Interactions between Keggin Heteropolyanions in Dilute Solutions

Previously, Keggin phosphotungstate heteropolyanions (HPA), PW 12 O 40 3– , are known to interact via short-range attraction and long-range repulsion (SALR) at moderate and high solution concentrations and low-pH (pH = 1). These interactions were identified through the observation of structure factor peaks in small-angle X-ray scattering (SAXS) data reported previously (J. Phys. Chem. C 2016, 120, 1317). Here we describe the interactions between the same heteropolyanions with extremely low concentrations at low (pH = 0) and high pH (pH = 4.7) conditions. The solution chemistry of Keggin heteropolyanions at these two pH values offers a unique way to change the charge of the cluster anions without changing the structure (from the perspective of SAXS) and, at the same time, changing the hydrogen bonding interactions. The structure factors obtained from concentration dependent SAXS data reveal that the change in pH changes the nature of SALR interactions, consistent with the presence of the plenary PW 12 O 40 3– anion at pH = 0 and the monovacant lacunary PW 11 O 39 7– anion at pH = 4.7. At the low pH condition, the attractive interactions dominate to provide a peak near Q = 0 Å –1 momentum transfer in the structure factors, whereas at pH = 4.7 the repulsive interactions dominate, thereby eliminating the peak near Q = 0 Å –1 . The experimental findings presented here are in agreement with the recent liquid state theory and computer simulation predictions on SALR interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Mechanistic Pathways for N 2 O Elimination from trans -R 3 Sn-O-N=N-O-SnR 3 and for Reversible Binding of CO 2 to R 3 Sn-O-SnR 3 (R = Ph, Cy)

The rate and mechanism of the elimination of N 2 O from trans-R 3 Sn-O-N=N-O-SnR 3 (R = Ph ( 1 Ph ) and R = Cy ( 1 Cy )) to form R 3 Sn-O-SnR 3 (R = Ph ( 2 Ph ) and R = Cy ( 2 Cy )) have been studied using both NMR and IR techniques to monitor the reactions in the temperature range of 39–79 °C in C 6 D 6 . Activation parameters for this reaction are ΔH ‡ = 15.8 ± 2.0 kcal·mol –1 and ΔS ‡ = –28.5 ± 5 cal·mol –1 ·K –1 for 1 Ph and ΔH ‡ = 22.7 ± 2.5 kcal·mol –1 and ΔS ‡ = –12.4 ± 6 cal·mol –1 ·K –1 for 1 Cy . Addition of O 2 , CO 2 , N 2 O, or PPh 3 to sealed tube NMR experiments did not alter in a detectable way the rate or product distribution of the reactions. Computational DFT studies of elimination of hyponitrite from trans-Me 3 Sn-O-N=N-O-SnMe 3 ( 1 Me ) yield a mechanism involving initial migration of the R 3 Sn group from O to N passing through a marginally stable intermediate product and subsequent N 2 O elimination. Reactions of 1 Ph with protic acids HX are rapid and lead to formation of R 3 SnX and trans-H 2 N 2 O 2 . Reaction of 1 Ph with the metal radical •Cr(CO) 3 C 5 Me 5 at low concentrations results in rapid evolution of N 2 O. At higher •Cr(CO) 3 C 5 Me 5 concentrations, evolution of CO 2 rather than N 2 O is observed. Addition of 1 atm or less CO 2 to benzene or toluene solutions of 2 Ph and 2 Cy resulted in very rapid reaction to form the corresponding carbonates R 3 Sn-O-C(=O)-O-SnR 3 (R = Ph ( 3 Ph ) and R = Cy ( 3 Cy )) at room temperature. Evacuation results in fast loss of bound CO 2 and regeneration of 2 Ph and 2 Cy . Variable temperature data for formation of 3 Cy yield ΔH o = –8.7 ± 0.6 kcal·mol –1 , ΔS o = –17.1 ± 2.0 cal·mol –1 ·K –1 , and ΔG o 298K = –3.6 ± 1.2 kcal·mol –1 . Furthermore, DFT studies were performed and provide additional insight into the energetics and mechanisms for the reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A Proposal of Conducting Bioequivalence Trials with Gastric pH Modulators for Two Oral Formulations Demonstrating Different Dissolution Profiles at Elevated pH

In this paper, a special case for bioequivalence evaluation of oral formulations is discussed. Drug formulations with different forms of active moieties (e.g., free base and salt) may yield different dissolution characteristics and, thus, differ in absorption at elevated gastric pH . However, routine bioequivalence trials using subjects with normal gastric pH (i.e., ~ 1) may fail to identify these differences because dissolution/absorption profiles of the two formulations at normal gastric pH are similar. In the case of palbociclib, it is confirmedthat the free base and salt formulations showed different absorption in patients with different gastric pH . Significant reduction in drug absorption was observed only in patients with elevated gastric pH using free base formulation. The discovery that the free base had significantly reduced absorption hinged on the inclusion of enough patients with elevated gastric pH to detect a difference in a bioequivalence trial. This raises a concern, as demonstrated through simulation, that dissolution/absorption differences in other formulations could be missed in routine bioequivalence trials. Aside from differences in active pharmaceutical ingredients ( API s), other factors, such as changes in excipients or manufacturing methods, may also lead to exposure differences between formulations at elevated gastric pH . For formulations containing different forms of the same active moiety or the same API and showing different dissolution profiles at elevated pH (i.e., pH ~ 4–6.8), evaluation of bioequivalence with gastric pH modulators (e.g., a H 2 blocker) in addition to routine bioequivalence assessments may help to ensure therapeutic equivalence in patients with elevated gastric pH .

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Method of evaluating pH using an inorganic-oxide nanoparticle based optical pH sensor

A method for evaluating the pH of an aqueous solution by utilizing the optical properties of a pH sensing material includes optically active nanoparticles fixed to a substrate. The optically active nanoparticles have a localized refractive index modulation over a pH range from 2.0 to 12.0 of at least 1% and, where the plurality of optically active nanoparticles have an average nanoparticle diameter of less than about 500 nanometers. The method includes contacting the pH sensing material with the aqueous solution, illuminating the pH sensing material, and monitoring an optical signal generated through comparison of incident light and exiting light to determine the optical transmission, absorption, reflection, and/or scattering of the pH sensitive material. The optical signal of the pH sensitive material varies in response to the pH of the aqueous solution, providing a means by which the pH and any changes in the pH may be analyzed.

02 PETROLEUM↗
DOE OSTI2018

Impact of pH on Aqueous-Phase Phenol Hydrogenation Catalyzed by Carbon-Supported Pt and Rh

In aqueous phase, the rates of hydrogenation of aromatic substrates such as phenol on Pt/C and Rh/C are influenced by varying activity of hydronium ions. Decreasing the pH from 8 to 1 increases the rate of hydrogenation of phenol on Pt at 20 bar H 2 and 80 °C by 15-fold. This increase is attributed to weakening of the hydrogen binding energy (HBE) on the metal surface with decreasing pH. A weaker HBE at lower pH is also predicted by ab initio molecular dynamics simulations, providing atomistic insight into the impact of electrolyte ion distribution and interfacial solvent reorganization on HBE. The lower HBE results in a decrease in the activation energy for addition of adsorbed H from the metal to the adsorbed organic (with a Brønsted–Evans–Polanyi slope of ~1). In conclusion, the kinetic model derived accounts also for the lack of pH dependence at low hydrogen coverages (at 1 bar H 2 on Pt or up to 70 bar H 2 on Rh), when the weakening of the HBE decreases the hydrogen coverage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Potential-pH diagrams considering complex oxide solution phases for understanding aqueous corrosion of multi-principal element alloys

The potential-pH diagram, a graphical representation of the thermodynamically predominant reaction products in aqueous corrosion, is originally proposed for the corrosion of pure metals. The original approach only leads to stoichiometric oxides and hydroxides as the oxidation products. However, numerous experiments show that non-stoichiometric oxide scales are prevalent in the aqueous corrosion of alloys. In the present study, a room temperature potential-pH diagram considering oxide solid solutions, as a generalization of the traditional potential-pH diagram with stoichiometric oxides, is constructed for an FCC single-phase multi-principal element alloy (MPEA) based on the CALculation of PHAse Diagram method. The predominant reaction products, the ions in aqueous solution, and the cation distribution in oxides are predicted. The oxide solid solution is stabilized by the mixing free energy (or mixing entropy) and the stabilizing effect becomes more significant as the temperature increases. Consequently, solid solution oxides are stable in large regions of the potential-pH diagram and the mixing free energy mostly affects the equilibrium composition of the stable oxides, while the shape of stable regions for oxides is mostly determined by the structure of the stable oxides. Agreements are found for Ni 2+ , Fe 2+ , and Mn 2+ between the atomic emission spectroelectrochemistry measurements and thermodynamic calculations, while deviations exist for Cr 3+ and Co 2+ possibly due to surface complexation with species such as Cl - and the oxide dissolution. By incorporating the solution models of oxides, the current work presents a general and more accurate way to analyze the reaction products during aqueous corrosion of MPEAs.

Materials Science↗
DOE OSTI2022

Method of evaluating pH using a metallic nanoparticle incorporated nanocomposite-based optical pH sensor

A method for evaluating the pH of an aqueous solution by utilizing the optical properties of a pH sensing material comprised of plurality of optically active nanoparticles dispersed in matrix material. The optically active nanoparticles have an electronic conductivity greater than about 10−1 S/cm and generally have an average nanoparticle diameter of less that about 500 nanometers, and the matrix material is a material which experiences a change in surface charge density over a pH range from 2.0 to 12.0 of at least 1%. The method comprises contacting the pH sensing material and the aqueous solution, illuminating the pH sensing material, and monitoring an optical signal generated through comparison of incident light and exiting light to determine the optical transmission, absorption, reflection, and/or scattering of the pH sensitive material. The optical signal of the pH sensitive material varies in response to the pH of the aqueous solution.

Ohodnicki, Jr., Paul R.↗
DOE OSTI2024

Mild pH-decoupling aqueous flow battery with practical pH recovery

Establishing a pH difference between the two electrolytes (pH decoupling) of an aqueous redox flow battery (ARFB) enables cell voltages exceeding the 1.23 V thermodynamic water-splitting window, but acid–base crossover penalizes efficiency and lifetime. Here we employ mildly acidic and mildly alkaline electrolytes to mitigate crossover, achieving high round-trip energy efficiency with open circuit voltage >1.7 V. We implemented an acid–base regeneration system to periodically restore electrolytes to their initial pH values. The combined system exhibited capacity fade rate <0.07% per day, round-trip energy efficiency >85% and approximately 99% Coulombic efficiency during stable operation for over a week. Cost analysis shows that the tolerance of acid–base crossover could be increased if the pH-decoupling ARFB achieved a higher voltage output and lower resistance. Finally, this work demonstrates principles for improving lifespan, rate capability and energy efficiency in high-voltage pH-decoupling ARFBs and pH recovery concepts applicable for pH-decoupling systems.

25 ENERGY STORAGE↗
DOE OSTI2019

Electrocatalytic Hydrogen Evolution in Neutral pH Solutions: Dual-Phase Synergy

Electrolysis in neutral pH solutions (e.g., wastewater and seawater) presents a transformative way for environmentally friendly, cost-effective hydrogen production. However, one of the biggest challenges is the lack of active, robust hydrogen evolution reaction (HER) catalysts. Herein we present a catalyst with dual active sites of MoP2 and MoP which function synergistically to promote HER in neutral pH solutions. In our microbial electrolysis cell (MEC) which uses neutral pH wastewater as a feedstock, the new catalyst generates an average HER current density of ~157 A m-2Cathode-Surface-Area, higher than Pt/C (~145 A m-2Cathode-Surface-Area), ~5 times higher than the state-of-art platinum-group-metal (PGM)-free catalysts in MECs. The new catalyst also outperforms Pt/C in natural seawater with ~10% higher and more stable HER current density. The fundamental reason for the enhanced HER performance is identified to be the synergy between MoP2 and MoP phases, with MoP2 promoting H2O chemisorption/dissociation and MoP efficiently converting Hads to H2.

Xie, Xiaohong↗
DOE OSTI2019

Coarse-Grained Models for Constant pH Simulations of Carboxylic Acids

A model for carboxylic acids, in both the protonated and deprotonated states, is developed in which hydrogen interaction sites are not used and all interactions are short-ranged. A method for constant pH simulations, which exploits these features of the model, is developed. Here, the constant pH method samples protonation states by making discrete Monte Carlo steps and is able to efficiently move between states in two steps. The method is applied to the polymer poly(methacrylic acid), a pH-responsive polymer that undergoes structural changes as a function of pH. The model is able to reproduce the structural changes induced by pH.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Explanation of Dramatic pH-Dependence of Hydrogen Binding on Noble Metal Electrode: Greatly Weakened Water Adsorption at High pH

Hydrogen oxidation reaction (HOR) and hydrogen evolution reaction (HER) are both 2 orders slower in alkaline electrolyte than in acidic electrolyte, but no explanation has been provided. The first step toward understanding this dramatic pH-dependent HOR/HER performance is to explain the pH-dependent hydrogen binding to the electrode, a perplexing behavior observed experimentally. In this work, we carried out Quantum Mechanics Molecular Dynamics (QMMD) with explicit considerations of solvent and applied voltage ( U ) to in situ simulate water/Pt(100) interface in the condition of under-potential adsorption of hydrogen ( H UPD ). We found that as U is made more negative, the electrode tends to repel water, which in turn increases the hydrogen binding. We predicted a 0.13 eV increase in hydrogen binding from pH = 0.2 to pH = 12.8 with a slope of 10 meV/pH, which is close to the experimental observation of 8 to 12 meV/pH. Thus, we conclude that the changes in water adsorption are the major causes of pH-dependent hydrogen binding on a noble metal. Furthermore, the new insight of critical role of surface water in modifying electrochemical reactions provides a guideline in designing HER/HOR catalyst targeting for the alkaline electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗