SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Nuclear magnetic resonance of phosphorus compounds, discussing signs of spin-spin couplings in dimethylphosphine and methylphosphine
The J = 1-0 and 3-2 transitions of phosphorus nitride, PN, with resolvable hyperfine components at 46.99 GHz and blended components at 140.97 GHz, and transitions of phosphine, PH3, at 47.39 and 46.94 GHz, arising from a small induced dipole moment, have been searched for but not found in interstellar molecular clouds. The J = 3/2-1/2, F - 3/2-3/2 transition of nitric oxide, NO, and the J(K-K+) = 16(4, 12) -15(5, 11) transition of sulfur dioxide, SO2, have been detected in Orion and Sagittarius B2. An unidentified emission line, U140921.8 MHz, has been observed in IRC + 10216.
Utilization of various phosphorus compounds by chlorella - hydrolysis
Relative signs and magnitudes of proton nuclear magnetic resonance coupling constants in phosphorus compounds
Isotopic measurements have been made on organic sulfur and phosphorus compounds recently discovered in the Murchison meteorite. Carbon, hydrogen and sulfur measurements were performed on individual members of the organic sulfur compounds, alkyl sulfonates; and carbon and hydrogen measurements were made on bulk alkyl phosphonates. Cooper and Chang reported the first carbon isotopic measurements of Murchison organic sulfonates, providing insight into the potential synthetic mechanisms of these and, possibly, other organic species. Hydrogen isotopic measurements of the sulforiates now reveal deuterium excesses ranging from +660 to +2730 %. The deuterium enrichments indicate formation of the hydrocarbon portion of these compounds in a low temperature astrophysical environment consistent with that of dense molecular clouds. Measurements of the sulfur isotopes provide further constraints on the origin and mechanism of formation of these organic molecules. Recently, there has been growing documentation of sulfur isotopic anomalies in meteoritic material. Thiemens and Jackson have shown that some bulk ureilites possess excess S-33 and Thiemens et al. have reported excess S-33 in an oldhamite separate from the Norton County meteorite. Rees and Thode reported a large S-33 excess in an Allende acid residue, however, attempts to verify this measurements have been unsuccessful, possibly due to the heterogeneous nature of the carrier phase. With the recognition that sulfur isotopes may reflect chemistry in the protosolar nebula or the precursor molecular cloud, identification of potential carriers is of considerable interest. In the present study, the stable isotopes of sulfur were measured in methane sulfonic acid extracted from the Murchison meteorite. The isotopic composition was found to be: (delta)S-33 = 2.48 %, (delta)S-34 = 2.49 % and (delta)S-36 = 6.76 %. Based upon analysis of more than 60 meteoritic and numerous terrestrial samples, the mass fractionation lines are defined by Delta-33 = (delta)S-33 -0.50(delta)S-34 and Delta-36 = (delta)s-36 - 1.97 (delta)S-34. From these relationships Delta-33 = 1.24 % and Delta-36 = 0.89 % are observed. These anomalies, particularly the Delta-33, lie well outside the range of analytical uncertainty. They are the largest observed in any meteoritic component and the first found in an organosulfur compound. As discussed by Thiemens and Jackson, due to it's position on the periodic chart, sulfur undergoes chemically induced mass independent isotopic fractionations as does oxygen. Experiments by Mauersberger et. al. show that in such processes, the magnitude of fractionation for the different isotopically substituted species varies with mass and angular momentum; thus, anomalies are expected for both S-33 and S-36, but not necessarily of the same magnitude. Laboratory experiments have also confirmed that chemically produced, mass independent fractionations are mediated by molecular symmetry factors. A chemical source of fractionation requires that the sulfur isotopic anomaly was established in the gas phase, probably in reactions involving symmetric CS2. The discovery of an anomalous sulfur isotopic composition in a specific molecule containing excess deuterium is an important advance in the understanding of the cosmochemistry of sulfur. This evidence suggests that methanesulfonic acid was synthesized by interstellar processes. Further measurements and details of possible synthesis and fractionation mechanisms will be presented.
Impacts among asteroidal objects would have altered or destroyed pre-existing organic matter in both targets and projectiles to a greater or lesser degree depending upon impact velocities. To begin filling a knowledge gap on the shock metamorphism of organic compounds, we are studying the effects of shock impacts on selected classes of organic compounds utilizing laboratory shock facilities. Our approach is to subject mixtures of organic compounds, embedded in the matrix of the Murchison meteorite, to simulated hypervelocity impacts by firing them into targets at various pressures. The mixtures are then analyzed to determine the amount of each compound that survives as well as to determine if new compounds are being synthesized. The initial compounds added to the matrix (with the exception of thiosulfate). The sulfonic acids were chosen in part because they are relatively abundant in Murchison, relatively stable, and because they and the phosphonic acids are the first well-characterized homologous series of organic sulfur and phosphorus compounds identified in an extraterrestrial material. Experimental procedures were more fully described in the original proposal. A 20 mm gun, with its barrel extending into a vacuum chamber (10(exp -2) torr), was used to launch the projectile containing the sample at approx. 1.6 km/sec (3,600 mi/hr) into the target material. Maximum pressure of impact depend on target/projectile materials. The target was sufficiently thin to assure minimum pressure decay over the total sample thickness.
In an effort to improve polymer thermal conductivity (TC), Ultem(TradeMark) 1000 was compounded with nano-fillers of carbon allotropes. Ultem(TradeMark) 1000 was selected since it is both solution and melt processable. As-received and modified multiwalled carbon nanotubes (MWCNTs), vapor grown carbon nanofibers (CNF) and expanded graphite (EG) were investigated. MWCNTs were modified by functionalizing the surface through oxidization with concentrated acids, mixing with an alkyl bromide, and addition of alkyl and phosphorus compounds after initial treatment with n-butyl lithium. Functionalization was performed to improve the TC compatibility between the resin and MWCNTs. It was postulated that this may provide an improved interface between the MWCNT and the polymer which would result in enhanced TC. The nano-fillers were mixed with Ultem(TradeMark) 1000 in the melt and in solution at concentrations ranging from 5 to 40 wt%. Ribbons were extruded from the blends to form samples where the nano-fillers were aligned to some degree in the extrusion direction. Samples were also fabricated by compression molding resulting in random orientation of the nano-fillers. Thermal properties of the samples were evaluated by Differential Scanning Calorimetry (DSC) and Thermal Gravimetric Analyzer (TGA). Tensile properties of aligned samples were determined at room temperature. The specimens were cut from the ribbons in the extrusion direction; hence the nano-fillers are somewhat aligned in the direction of stress. Typically it was observed that melt mixed samples exhibited superior mechanical properties compared to solution mixed samples. As expected, increased filler loading led to increased modulus and decreased elongation with respect to the neat polymer. The degree of dispersion and alignment of the nano-fillers was determined by high-resolution scanning electron microscopy (HRSEM). HRSEM of the ribbons revealed that the MWCNTs and CNFs were predominantly aligned in the flow direction. The TC of the samples was measured using a Nanoflash(TradeMark) instrument. Since the MWCNTs and CNF are anisotropic, the TC was expected to be different in the longitudinal (parallel to the nanotube and fiber axis) and transverse (perpendicular to the nanotube and fiber axis) directions. The extruded ribbons provided samples for transverse TC measurements. However, to determine the TC in the longitudinal direction, the ribbons needed to be stacked and molded under 1.7 MPa and 270 C. Samples were then obtained by cutting the molded block with a diamond saw. The largest TC improvement was achieved for aligned samples when the measurement was performed in the direction of MWCNT and CNF alignment (i.e. longitudinal axis). Unaligned samples also showed a significant improvement in TC and may be potentially useful in applications when it is not possible to align the nano-filler. The results of this study will be presented.
Electric discharge reactions in mixtures of phosphine with methane, ammonia and water, obtaining biologically significant inorganic and organic phosphorus compounds
Phosphorus rich plasma enhanced chemical vapor deposition (PECVD) of silicon nitride and silicon dioxide films on n-type indium phosphide (InP) substrates were exposed to electron-beam irradiation in the 5 to 40 keV range for the purpose of characterizing the damage induced in the dielectric. The electron-beam exposure was on the range of 10(exp -7) to 10(exp -3) C/sq cm. The damage to the devices was characterized by capacitance-voltage (C-V) measurements of the metal insulator semiconductor (MIS) capacitors. These results were compared to results obtained for radiation damage of thermal silicon dioxide on silicon (Si) MOS capacitors with similar exposures. The radiation induced damage in the PECVD silicon nitride films on InP was successfully annealed out in an hydrogen/nitrogen (H2/N2) ambient at 400 C for 15 min. The PECVD silicon dioxide films on InP had the least radiation damage, while the thermal silicon dioxide films on Si had the most radiation damage.
Thermodynamic properties of carbon, hydrogen, oxygen, phosphorus, and sulfur compounds
Thermodynamic properties of various carbon- hydrogen-nitrogen-oxygen-phosphorus-sulfur compounds
Flammability and weight loss reduced. Fire-resistant polymers obtained from 1-{(dialkoxyphosphonyl) methyl}-2, 4- and -2, 6-diaminobenzenes by reaction with acyl or diacyl halides of higher functionality. Incorporation of compounds containing phosphorus into certain polymers shown previously to increase fire retardance. Discovery adds new class of polyamides to group of such polymers.
Organic phosphate compound synthesis, purification and use in detection of enzymatic activity in soils by fluorescence after biological oxidation
Hygienic hazards of air pollution from aerial insecticide spraying
Signs of phosphorus-fluorine nuclear resonance spin-spin coupling constants
Stereospecific addition of organophosphides to terminal alkynes
Organic phosphate shown as inhibitory factor from B. stearothermophilus for attachment of amino acids to transfer RNA
IR vibrational and Raman spectra of thiophosphoryl trichloride, thiophosphoryl dichlorofluoride, thiophosphoryl chlorodifluoride and thiophosphoryl trifluoride