Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHOTOGRAPHY - AIR FLOW - WINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Flow visualization of secondary flows in three curve ducts

Streak photography flow measurements are made for secondary flows in three 90-deg curved ducts of square cross section and different radii of curvature, at Dean numbers of 15,000-36,000 and radius ratios of 0.5, 2.3, and 3.0. Attention is given to secondary flow patterns for three cross sections in each bend: the inlet zero-deg plane, the midpoint 45-deg plane, and the outlet 90-deg plane. After a rapid transition region, the pressure-driven secondary flow patterns were characterized by flow moving toward the outer curved wall at the axial midplane and returning to the inner wall along the duct walls. The 0.5-radius ratio elbow was found to have the greatest influence on upstream inlet conditions.

Sanz, G. M.↗
NASA NTRS2017

Quantitative Image Analysis Techniques with High-Speed Schlieren Photography

Optical flow visualization techniques such as schlieren and shadowgraph photography are essential to understanding fluid flow when interpreting acquired wind tunnel test data. Output of the standard implementations of these visualization techniques in test facilities are often limited only to qualitative interpretation of the resulting images. Although various quantitative optical techniques have been developed, these techniques often require special equipment or are focused on obtaining very precise and accurate data about the visualized flow. These systems are not practical in small, production wind tunnel test facilities. However, high-speed photography capability has become a common upgrade to many test facilities in order to better capture images of unsteady flow phenomena such as oscillating shocks and flow separation. This paper describes novel techniques utilized by the authors to analyze captured high-speed schlieren and shadowgraph imagery from wind tunnel testing for quantification of observed unsteady flow frequency content. Such techniques have applications in parametric geometry studies and in small facilities where more specialized equipment may not be available.

Pollard, Victoria J.↗
NASA NTRS1979

Application of multispectral color photography to flame flow visualization

For flames of short duration and low intensity of radiation a spectroscopical flame diagnostics is difficult. In order to find some other means of extracting information about the flame structure from its radiation, the feasibility of using multispectral color photography was successfully evaluated. Since the flame photographs are close-ups, there is a considerable parallax between the single images, when several cameras are used, and additive color viewing is not possible. Each image must be analyzed individually, it is advisable to use color film in all cameras. One can either use color films of different spectral sensitivities or color films of the same type with different color filters. Sharp cutting filters are recommended.

Stoffers, G.↗
NASA NTRS1978

A stereoscopic visual study of coherent structures in turbulent shear flow

Stereoscopic photography was used to record the three-dimensional motions of fluid elements along a flat-plate turbulent boundary layer flow. The outer region of the boundary layer was dominated by the formation and convection of transverse vortices, formed at the high-speed front between low- and high-speed fluid elements. Vortical motions observed in the wall region consisted of (1) motions of single particles around part of a circle, (2) streamwise vortices, and (3) transverse vortices.

Praturi, A. K.↗
NASA NTRS1972

A study of temporal estaurine flow dynamics

Multispectral photography,infrared imagery, image enhancement, and oceanographic, radiometric, and meteorological data were used in the study of temporal estuarine flow dynamics, nearshore circulation, and the resulting dispersal of suspended and dissolved substances introduced from the continent. Repetitive multispectral photography, IR imagery, total radiance and irradiance, water surface temperatures, salinity, total suspended solids, visibility, current velocity, winds, dye implants, and high contrast image enhancement were used to observe and describe water mass boundaries in the nearshore zone and to attempt to establish on what repetitive scale these coastal features should be observed to better understand their behavior. Water mass variability patterns, seen naturally and with the use of dyes, along the North Carolina coast and in the Chesapeake Bay are being studied as synoptic data on the basic dynamics of circulation, flushing, and mixing in coastal waters.

Mairs, R. L.↗
NASA NTRS1988

Reduced gravity and ground testing of a two-phase thermal management system for large spacecraft

Experiments were performed aboard the NASA-JSC KC-135 aircraft to study the effect of reduced gravity on two-phase (liquid/vapor) flow and condensation. A prototype two-phase thermal management system for a large spacecraft was tested. Both visual observation and photography of the flow regimes were made. Ground test simulations of the KC-135 flight tests were conducted for comparison purposes. Two-phase pressure drops were predictable by the Heat Transfer Research Institute (HTRI) method, or the Friedel correlation.

Hill, D. G.↗
NASA NTRS1987

A microgravity boiling and convective condensation experiment

A boiling and condensing test article consisting of two straight tube boilers, one quartz and one stainless steel, and two 1.5 m long glass-in-glass heat exchangers, on 6 mm ID and one 10 mm ID, was flown on the NASA KC-135 0-G aircraft. Using water as the working fluid, the 5 kw boiler produces two phase mixtures of varying quality for mass flow rates between 0.005 and 0.1 kg/sec. The test section is instrumented at eight locations with absolute and differential pressure transducers and thermocouples. A gamma densitometer is used to measure void fraction, and high speed photography records the flow regimes. A three axis accelerometer provides aircraft acceleration data (+ or - 0.01G). Data are collected via an analog-to-digital conversion and data acquisition system. Bubbly, annular, and slug flow regimes were observed in the test section under microgravity conditions. Flow oscillations were observed for some operating conditions and the effect of the 2-G pullout prior to the 0-G period was observed by continuously recording data throughout the parabolas. A total fo 300 parabolas was flown.

Kachnik, Leo↗
NASA NTRS1973

Lava flows in Mare Imbrium - Geologic evaluation from Apollo orbital photography

A study of Apollo photographs indicates that all Eratosthenian age mare deposits in the Imbrium basin consist of extensive lava flows from a single eruptive source region bounded by 18 to 23 N and 28 to 32 W in the south-southwest corner of the basin. It is suggested that three major eruptive periods occurred between 3.0 plus or minus 0.4 and 2.5 plus or minus 0.3 b.y. Lavas assigned to these three phases extended for 1200, 600, and 400 km, respectively, over slopes approaching 1:1000. These materials cover an area of 200,000 sq km and have a volume of perhaps 40,000 cu km. The vent source of the youngest lava phase appears to be a 20 km long, structurally controlled fissure at 22 deg 50 min N and 31 deg 20 min W. The flow heights and lengths are consistent with the lunar gravity and imply extremely high rates of lava extrusion with low viscosity of the basalt melt playing a secondary role. The location of the volcanic source region on the intersection of major ring faults from two large basins suggests a basin structural control.

Schaber, G. G.↗
NASA NTRS1992

A stroboscopic technique for using CCD cameras in flow visualization systems for continuous viewing and stop action photography

A technique for synchronizing a pulse light source to charge coupled device cameras is presented. The technique permits the use of pulse light sources for continuous as well as stop action flow visualization. The technique has eliminated the need to provide separate lighting systems at facilities requiring continuous and stop action viewing or photography.

Franke, John M.↗