Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA BEAM INJECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

The plasma environment during particle beam injection into space plasmas. I - Electron beams. II - Charge-neutral beams

A realistic electrostatic simulation model is used to investigate the plasma environment in the near vicinity of a spacecraft during the injection of electon beams from the spacecraft. The model is described, and the cases of injection into vacuum and into a low-density plasma are addressed. The relationship of the two-dimensional results to the purely field-aligned one-dimensional simulations is discussed. The dependence of the results on the ambient plasma density is investigated. Then, the properties of a charge-neutral beam and the plasma response are examined for the case where the beam has nonzero velocity components parallel and perpendicular to the magnetic field. The parameters used in the simulation are described, and the properties of the beam injection into the vacuum and in the case where a plasma is present are given.

Pritchett, P. L.↗
NASA NTRS1989

Spacecraft charging potential during electron-beam injections into space plasmas

Injections of nonrelativistic electron beams from an infinite conductor have been simulated by using a two-dimensional electrostatic particle code to study the spacecraft charging potential. The simulations show that the conductor charging potential at the end of simulations does not vary with the beam density when the beam density exceeds four times the ambient density. The reflection coefficient, which determines a percentage of incident electrons reflected by the conductor, increases the charging potential. To charge the conductor to the beam energy, the reflection coefficient needs to be about 0.5. The results are applied to explain the spacecraft charging potential measured during the Sepac experiments on Spacelab 1.

Lin, Chin S.↗
NASA NTRS1990

Fast magnetization of a high-to-low-beta plasma beam

The magnetization of a high-beta (plasma energy density/magnetic-field energy density) hydrogen-plasma beam injected into a vacuum transverse magnetic field is studied experimentally. Nominal parameters were Ti = 1 eV, Te = 5 eV, n = 3 x 10 to the 13th/cu cm or less, v(i) = 7 x 10 to the 6th cm/sec or less, t(pulse) less than 70 microsec, and Bz = 300 G or less. Plasma characteristics were measured for a wide beam and a downstream distance, x = 300 rho(i) or less, where x is the downstream distance and rho(i) is the ion gyroradius. A brief initial state of diamagnetic propagation is observed, followed by magnetized propagation accompanied by beam compression transverse to B with as much as a factor of 4 increase in density and a slight drift of the beam in the ion Lorentz force direction.

Song, J. J.↗
NASA NTRS1994

A simulation study of radial expansion of an electron beam injected into an ionospheric plasma

Injections of nonrelativistic electron beams from a finite equipotential conductor into an ionospheric plasma have been simulated using a two-dimensional electrostatic particle code. The purpose of the study is to survey the simulation parameters for understanding the dependence of beam radius on physical variables. The conductor is charged to a high potential when the background plasma density is less than the beam density. Beam electrons attracted by the charged conductor are decelerated to zero velocity near the stagnation point, which is at a few Debye lengths from the conductor. The simulations suggest that the beam electrons at the stagnation point receive a large transverse kick and the beam expands radially thereafter. The buildup of beam electrons at the stagnation point produces a large electrostatic force responsible for the transverse kick. However, for the weak charging cases where the background plasma density is larger than the beam density, the radial expansion mechanism is different; the beam plasma instability is found to be responsible for the radial expansion. The simulations show that the electron beam radius for high spacecraft charging cases is of the order of the beam gyroradius, defined as the beam velocity divided by the gyrofrequency. In the weak charging cases, the beam radius is only a fraction of the beam gyroradius. The parameter survey indicates that the beam radius increases with beam density and decreases with magnetic field and beam velocity. The beam radius normalized by the beam gyroradius is found to scale according to the ratio of the beam electron Debye length to the ambient electron Debye length. The parameter dependence deduced would be useful for interpreting the beam radius and beam density of electron beam injection experiments conducted from rockets and the space shuttle.

Koga, J.↗
NASA NTRS1984

Space plasma investigations on the First Spacelab Mission

A series of investigations was carried out during the First Spacelab Mission to study the space plasma environment from the Shuttle/Spacelab. The emphasis of the experiments was on the performance of particle injections from the Shuttle/Spacelab and studies of the ensuing effects on the orbiter, the near orbiter environment, and the earth's atmosphere. Results of these experiments, including electron beam injections, plasma injections, neutral injections, electron-plasma injections, electron-neutral injections, and ambient environmental measurements, are reviewed.

Roberts, W. T.↗
NASA NTRS1987

Space charge effects during the injection of dense electron beams into space plasmas

One-dimensional electrostatic particle simulations are used to investigate the injection and propagation of intense electron beams and the plasma response to the beam injection. Beam densities greater than about the plasma density are considered. It is shown that if the injection is continuous, most of the beam electrons are drawn back into the spacecraft because of the buildup of positive charge on the spacecraft. Those electrons which are able to propagate away from the spacecraft are emitted periodically because of space charge oscillations induced by electric fields associated with the beam. A substantial increase in the fraction and average energy of electrons which can propagate away can be obtained if the injection is changed to periodic pulses having width and period matched to the induced space charge oscillations.

Winglee, R. M.↗
NASA NTRS1989

Simulation of radial expansion of an electron beam injected into a background plasma

A 2-D electrostatic particle code was used to study the beam radial expansion of a nonrelativistic electron beam injected from an isolated equipotential conductor into a background plasma. The simulations indicate that the beam radius is generally proportional to the beam electron gyroradius when the conductor is charged to a large potential. The simulations also suggest that the charge buildup at the beam stagnation point causes the beam radial expansion. From a survey of the simulation results, it is found that the ratio of the beam radius to the beam electron gyroradius increases with the square root of beam density and decreases inversely with beam injection velocity. This dependence is explained in terms of the ratio of the beam electron Debye length to the ambient electron Debye length. These results are most applicable to the SEPAC electron beam injection experiments from Spacelab 1, where high charging potential was observed.

Koga, J.↗
NASA NTRS1978

Electron beam injection experiments - The beam-plasma discharge at low pressures and magnetic field strengths

The paper describes electron beam injection experiments which clarify observational results obtained in rocket flights. A column of enhanced density plasma, exceeding the density expected from ionization by primary beam electrons, was observed in a large vacuum system at low magnetic fields (1 to 1.5 G) and low ambient pressures (10 to the minus 6 to 10 to the minus 5 torr). The peak luminosity of the discharge was about 10 times that of the beam alone, and the radius increased by a factor of three. In the absence of the discharge, RF emission is observed at 1.1 to 1.2 times the cyclotron frequency, and a strong band of RF noise with upper frequency cutoff at about the cyclotron frequency is observed in the discharge mode, along with higher frequency noise at or near the plasma frequency. The onset of the plasma discharge is critically dependent on beam current. The described results agree with observations obtained at much higher densities and magnetic fields in fusion research studies.

Bernstein, W.↗
NASA NTRS1990

Plasma heating, electric fields and plasma flow by electron beam ionospheric injection

The electric fields and the floating potentials of a Plasma Diagnostics Payload (PDP) located near a powerful electron beam injected from a large sounding rocket into the auroral zone ionosphere have been studied. As the PDP drifted away from the beam laterally, it surveyed a region of hot plasma extending nearly to 60 m radius. Large polarization electric fields transverse to B were imbedded in this hot plasma, which displayed large ELF wave variations and also an average pattern which has led to a model of the plasma flow about the negative line potential of the beam resembling a hydrodynamic vortex in a uniform flow field. Most of the present results are derived from the ECHO 6 sounding rocket mission.

Winckler, J. R.↗
NASA NTRS1987

Neutralization of beam-emitting spacecraft by plasma injection

An impulsive plasma injection has been used to study charge neutralization of the Space Shuttle Orbiter while it was emitting an electron beam into space. This investigation was performed by Space Experiments with Particle Accelerators on Spacelab-1. A plasma consisting of 10 to the 19th argon ion-electron pairs was injected into space for 1 ms while an electron beam was also being emitted into space. The electron beam energy and current were as high as 5 keV and 300 mA. While the orbiter potential was positive before the plasma injection and began to decrease during the plasma injection, it was near zero for 6 to 20 ms after the plasma injection. The recovery time to the initial level of charging varied from 10 to 100 ms. In a laboratory test in a large space chamber using the same flight hardware, the neutralization time was 8-17 ms and the recovery time was 11-20 ms. The long duration of the neutralization effect in space can be explained by a model of diffusion of the cold plasma which is produced near the Orbiter by charge exchange between the neutral argon atoms and the energetic argon ions during plasma injection.

Sasaki, S.↗
NASA NTRS1994

SEPAC co-investigator support

Mission preparation and support, data reduction and analysis, and modelling of beam phenomenon activities are described with respect to the Space Experiments with Particle Accelerators (SEPAC) project. The SEPAC Electron Beam Accelerator was used in observing the life time and drift velocity of ionization streaks in the upper atmosphere by ground based radars. A second active source, the plasma contactor (PC) electrically neutralized the shuttle orbiter during beam injections. Several observations of plasma density enhancements were correlated with orbiter crossings of the magnetic meridian of the Jicamarca, Peru radar located near the magnetic equator. One of several successful experiments was the artificial aurora experiment in which downward directed electron beam pulses were observed by the onboard AEPI camera. Theoretical and modelling efforts focused on phenomena related to electron beam and plasma cloud injection from spacecraft.

Source record↗
NASA NTRS1977

Three-dimensional ion sound turbulence

A fast cold large diameter electron beam is injected into a uniform background plasma. The injected beam current is balanced by a field-aligned return current which gives rise to an ion acoustic instability. The plasma is essentially unbounded and collisionless on the time scale of the pulsed experiment. The fluctuations are analyzed by probe techniques in real time and space as well as in the frequency and wavenumber domains. Strong density fluctuations are observed in the entire ion acoustic spectrum reaching peak amplitudes at the low frequency end. The propagation of phase coherent test waves in the current carrying plasma is investigated. For the highly turbulent regime strong damping is observed while at lower drift velocities direction is observed. Oblique propagation of two strong test waves at different frequencies indicate the role of nonlinear ion Landau damping in absorption of wave energy.

Stenzel, R. L.↗
NASA NTRS1988

Electric potential structures and propagation of electron beams injected from a spacecraft into a plasma

One-dimensional Vlasov simulations are used to study the propagation of electron beams injected from a spacecraft into an ambient plasma and the associated potential structures. It is shown that, for a given beam velocity, the propagation velocity and the potential structure depends on the beam density. In the case of moderate beams, a double layer forms near the beam head which propagates into the ambient plasma much more slowly than the initial beam velocity.

Singh, Nagendra↗
NASA NTRS1992

Plasma effects of active ion beam injections in the ionosphere at rocket altitudes

Data from ARCS rocket ion beam injection experiments are primarily discussed. There are three results from this series of active experiments that are of particular interest in space plasma physics. These are the transverse acceleration of ambient ions in the large beam volume, the scattering of beam ions near the release payload, and the possible acceleration of electrons very close to the plasma generator which produce intense high frequency waves. The ability of 100 ma ion beam injections into the upper E and F regions of the ionosphere to produce these phenomena appear to be related solely to the process by which the plasma release payload and the ion beam are neutralized. Since the electrons in the plasma release do not convect with the plasma ions, the neutralization of both the payload and beam must be accomplished by large field-aligned currents (milliamperes/square meter) which are very unstable to wave growth of various modes.

Arnoldy, R. L.↗
NASA NTRS1983

Electron beam injection experiments - Replication of flight observations in a laboratory beam plasma discharge

Recent electron beam injection experiments in the lower ionosphere have produced two perplexing results: (1) At altitudes from 140 km to 220 km, the beam associated 391.4 nm intensity is relatively independent of altitude despite the decreasing N2 abundance. (2) The radial extent of the perturbed region populated by beam associated energetic electrons significantly exceeds the nominal gyrodiameter for 90 deg injection. A series of laboratory measurements is described in which both of these flight results appear to have been closely reproduced. The laboratory results are reasonably consistent with the transition from a collision dominated to collisionless beam-plasma discharge configuration.

Bernstein, W.↗
NASA NTRS1989

PIC code modeling of spacecraft charging potential during electron beam injection into a background of neutral gas and plasma, part 1

Injections of nonrelativistic electron beams from an isolated equipotential conductor into a uniform background of plasma and neutral gas were simulated using a 2-D electrostatic particle code. The ionization effects on spacecraft charging are examined by including interactions of electrons with neutral gas. The simulations show that the conductor charging potential decreases with increasing neutral background density due to the production of secondary electrons near the conductor surface. In the spacecraft wake, the background electrons accelerated towards the charged spacecraft produce an enhancement of secondary electrons and ions. Simulations run for longer times indicate that the spacecraft potential is further reduced and short wavelength beam-plasma oscillations appear. The results are applied to explain the spacecraft charging potential measured during the SEPAC experiments from Spacelab 1.

Koga, J. K.↗
NASA NTRS1984

Plasma response to the injection of an electron beam

The results of Vlasov-Poisson-solver numerical simulations of the detailed temporal response of a Maxwellian plasma to the sudden injection of an electron beam are presented in graphs and maps and discussed. Phenomena characterized include ion bursts, electron shocks and holes, plasma heating and expulsion, density gradients; cavitons, deep-density-front and solitary-pulse propagation down the density gradient, and Bunemann-mode excitation leading to formation of a virtual cathode and double layers which are at first monotonic or have low-potential-side dips or high-potential-side bumps and become strong as the electron-current density decreases. The strength of the double layer is found to be roughly proportional to the beam energy.

Singh, N.↗
NASA NTRS1983

Plasma jet effects on the ionospheric plasma

Heavy ion beams were injected into the ionospheric plasma (experiments ARCS 1 and ARCS 2). In ARCS 1, operation of a 25eV argon ion source, mounted on a plasma diagnostic payload, produced an accelerated electron population; broadband electric field turbulence; large, spin synchronized electric field perturbations; and depletions of thermal ions. In ARCS 2, the ion source was deployed upward along the local magnetic field direction away from the diagnostic payload, and observed effects are contained within several meters of the ion source. However, enhanced wave levels near the LHR frequency are observed at distances up to 1 km, as are the injected ions themselves. A measurement of the dominant wavelength of the enhanced waves is consistent with an inference based upon the accelerated electron population seen in ARCS 1. This electron population is not evident during ARCS 2.

Moore, T. E.↗