SEARCH · Search NASA
Results for “PLASMA JETS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cold plasma interactions with plants: Morphing and movements of Venus flytrap and Mimosa pudica induced by argon plasma jet
Not Available
Electron plasma wave Thomson scattering on laboratory plasma jets
Plasma jets created from a 15 lm thick Al foil on a 1 MA pulsed power machine were studied using a new electron plasma wave (EPW) Thomson scattering system in conjunction with previously developed ion acoustic wave (IAW) Thomson scattering and interferometry. These diagnostics give multiple ways of measuring the electron temperature and density of the jet. Analysis of the EPW feature found the on-axis density of the jet to be between 5 X 10 18 and 1.4 X 10 19 cm -3 , which either matched or was higher than interferometry measurements. Outside of the jet, both of these diagnostics measured a density of 7 X 10 17 cm -3 . On one shot, the EPW spectral feature showed two pairs of peaks within a 250 lm scattering length on the edge of the jet, which shows that the boundary of the jet ~1 mm radius jet is 0.1 mm. While electron temperature measurements of the plasma jet are complicated by the probe beam producing inverse bremsstrahlung heating of the jet, comparison of the electron temperature measured between IAW and EPW Thomson scattering showed the EPW feature to imply significantly higher electron temperatures than the IAW feature (e.g., 160 eV vs 70 eV in one case). Various sources of this discrepancy (for example, density gradients, collisions, and a lag in ionization) and their impact on the plasma are discussed.
Effect of plasma on gas flow and air concentration in the effluent of a pulsed cold atmospheric pressure helium plasma jet
In this work, we report on the flow effects induced by a nanosecond pulsed helium cold atmospheric pressure plasma jet impinging on a glass substrate. Herein, gas temperature measurements have been performed using optical emission spectroscopy including rotational spectra of OH(A-X) (0,0) and N 2 (C-B) (0,0) and resonance broadening of a helium emission line at 667.8 nm. The measured increase in gas temperature was less than 15 K. We have measured the air concentration distribution in the jet effluent by means of Rayleigh scattering exploiting the large difference in Rayleigh cross-section of air and helium. The obtained results show that the plasma causes a broadening of the helium channel suggesting an enhanced gas velocity and mixing with the ambient air. The impact of the plasma on the jet effluent is polarity dependent and is larger in the case of positive applied voltage pulses. Using an estimation of the increased gas velocity required to obtain the observed air concentrations, we have shown that both gas heating and electrohydrodynamic (EHD) forces related to the propagation of an ionization front are not causing the observed phenomena. The surface charge which can exist for a much longer time than the duration of the applied voltage pulse is the primary cause of the EHD forces on the bulk charges which lead to significant different air concentration profiles in the jet effluent for plasma on and off.
Current polarity effects on laboratory plasma jets
Plasma jets produced by a pulsed power machine were investigated using Thomson scattering and other diagnostics in order to make detailed comparisons to simulations. These jets were produced from a 15 μm thick disc of Al foil on a 1.2 MA, 100 ns rise time, pulsed power machine. Experiments were performed with both a radially inward and a radially outward current ow in the Al foil to investigate the effects of voltage polarity in the experiments and determine how extended magnetohydrodynamic (XMHD) effects, such as the Hall effect, change the formation of the jet. We recorded Thomson scattering spectra with a low enough laser energy to not perturb the plasma, while providing a high enough signal to noise ratio to resolve the scattered features. This enabled the measurement of the electron temperature in the jet region of the plasma, 15.5±4 eV for both current polarities. Jets with a radially outward current ow were heated more from inverse bremsstrahlung when 10 J of laser energy was used, implying that these jets are denser than the ones with a radially inward current. This higher density was con rmed by interferometry measurements. Experimental results were compared with XMHD computer simulations, which predicted electron temperatures 1.5 to 3 σ above those measured, and significantly higher density than experiments in both polarities. In this paper, possible sources of this discrepancy are discussed.
Fast ion transport by sawtooth instability in the presence of ICRF-NBI synergy in JET plasmas
JET experiments have shown that the three-ion scenarios using waves in the ion cyclotron range of frequencies (ICRF) is an efficient way to build fast ion population through beam ion acceleration by radio frequency (RF) waves. Here, such a heating scheme is applied to plasmas with at least two thermal ion species. Analysis of mixed discharges with complex heating schemes requires a workflow that allows to model thermal and fast ion transport consistently. This paper is dedicated to modelling of a mixed plasma discharge with significant fraction of fast ions and contributes to development of fast ion transport models. For interpretive analysis with the TRANSP code a JET hydrogen-deuterium (HD) plasma discharge with neutral beam injection (NBI) and ICRF heating has been chosen. The task is complicated by NBI-ICRF synergy and plasma magnetohydrodynamic activity, like sawtooth crashes. D beam ions accelerated by RF waves form a high energy tail in fast ion distribution. Significant difference between the neutron rate computed by TRANSP and measured one is observed if the same diffusivity for electrons and ions is assumed. Sensitivity studies show that uncertainties in input plasma parameters and thermal ion transport models are crucial for modelling mixed plasma discharges and increased D transport is required to reach the plasma composition consistent with diagnostic measurements at the plasma edge. Fast ion redistribution by a sawtooth instability is characterised by non-resonant transport due to reconnection of magnetic field lines and resonant transport caused by resonance interaction between the instability and fast ions. With ORBIT simulations it has been shown that resonant interaction strongly affects fast ions of high energies, like beam ions accelerated by RF waves and fusion products. For the considered case, fast ion profiles simulated by ORBIT remain peaked after the sawtooth crashes.
Interferometry of plasma bursts in helium atmospheric-pressure plasma jets
Not provided.
Numerical and Experimental Study of an Aircraft Igniter Plasma Jet Discharge
The spark discharge of an aircraft plasma jet igniter is studied using high-fidelity numerical simulations and X-ray radiography measurements. The target problem here features the thermal expansion of hot gas introduced by the electric spark within a confined igniter cavity, which eventually evolves into a pulsed jet of a high-temperature kernel. A comprehensive set of models adapted from existing strategies for internal combustion engine spark plug discharge is extended to the target problem, including the modeling of energy deposition, plasma reactions, thermodynamic properties, and heat losses. A series of validation and parameter studies are performed and presented. The kernel size is found to be sensitive to heat losses arising from radiation and hot gas remained within the discharge cavity, rather than heat conduction to the wall in the discharge cavity. Depending on the enforced shape of the post-breakdown electric arc, the spark kernel can be off-centered, tilted, and considerably asymmetric. These features have been previously not considered when studying such igniter configurations and may have a first-order impact on the ignition process. Provided a proper setup of the heat loss models and electric arc shape, the numerical results are quantitatively comparable to the experimental results in terms of the kernel size, shape, and velocity throughout different stages after the spark discharge.
Electric Field Measurements at the Surface of a Piezoelectric Transformer for Plasma Jet Formation using the Plasma Research Facility at Sandia National Laboratory (Final Report)
The overall goal of this research is to understand how low-temperature non-equilibrium plasmas form directly off the surface of piezoelectric crystals. Specifically, this project aims to temporally and spatially resolve how the electric field evolves on and near the surface of a piezoelectric transformer (PT) at conditions that produce an atmospheric-pressure air plasma jet emanating from the corner of the PT. In this work, we used the Plasma Research Facility (PRF) at Sandia National Laboratory to conduct temporally- and spatially-resolved electric field induced second harmonic (E-FISH) measurements of the electric field at and near the surface of a piezoelectric transformer, providing a fundamental understanding of how piezoelectric crystals can be used for plasma generation. We carried out two Objectives: Objective 1 – The first objective was to measure the temporal and spatial evolution of the electric field along the surfaces approaching the corner of a rectangular PT just below conditions that lead to plasma jet formation. Such a measurement can be used to explain when and where the electric field peaks, leading to plasma formation; Objective 2 – The second objective was to measure the temporal and spatial evolution of the electric field along the surfaces approaching the corner of a rectangular PT just at conditions of plasma jet formation. This, in principle, gives a more accurate determination of how the electric field leads to plasma formation but is more difficult due to the relatively stochastic plasma jet behavior of a PT. This work was complemented by an award from the Sandia PRF, and we worked with Dr. Edward Barnat at the Sandia PRF to carry out these objectives.
Penetration of Ar and He RF-driven plasma jets into micrometer-sized capillary tubes
The penetration and propagation of cold atmospheric pressure plasmas into volumes having sub-millimeter to micrometer sizes with large aspect ratios is required for enabling an effective disinfection of the inside of catheter tubes, tooth cavities, skin pores and enhance plasma catalysis in porous catalysts. Here, we report on a study using a low voltage RF driven argon and helium plasma jets with the plasma generation outside a capillary tube with a large aspect ratio followed by its penetration and propagation inside the capillary. We present the experimental determination of the limitations on the penetration diameter, and the underpinning mechanisms of the plasma propagation and penetration process. Experimental results include time resolved imaging of plasma propagation and penetration in capillaries with different internal diameter and surface electric field measurements. We found that the time between the plasma jet in first contact with the capillary tube surface and the subsequent penetration into the capillary tube spans several RF cycles due to electric fields at the plasma-tube interface below 4 kV cm –1 . These low electric fields require Penning ionization and/or stepwise ionization and hence a buildup of the metastable and electron density is required to achieve a sufficiently large ionization rate near the capillary tube inlet to enable penetration and propagation. Furthermore, it is found that the propagation of the argon jet into the capillary occurs during the positive half cycle of the RF waveform and is very similar to the propagation of the jet in surrounding air.
Plasma-induced flow instabilities in atmospheric pressure plasma jets
Pulsed plasma excitation of rare gases flowing into air has been shown to impact the stability of the flow in non-equilibrium atmospheric pressure plasma jets (APPJs). In this paper, the results from a numerical modeling investigation of the stability of a round He APPJ with a powered electrode exposed to the gas flow are discussed. Localized gas heating at the powered electrode occurs on the time scale of the voltage pulse, tens to 100 ns, which is short compared to the fluid timescales. An acoustic wave propagates from this heated, expanding gas and exits the jet. The wave disturbs the shear layer between the He and surrounding humid air, exciting a shear instability which grows downstream with the flow and increases the mixing of the humid air into the He. The effects of the eddy-dominated flow on ionization wave (IW) propagation in an APPJ were investigated. The IW followed the regions of the highest helium concentration, resulting in an increased production of NO, HO 2 , and NO 2 .
Studying the Generation Stage of a Plasma Jet in a Plasma Focus Discharge
A dense compact plasmoid generated at the pinch collapse stage is revealed in a plasma focus discharge by laser optical methods. The initial size of the plasmoid is ~1 mm, its electron density is more than 2 × 10{sup 19} cm{sup –3}, and the plasmoid propagates along the axis from the anode at an average velocity of more than 10{sup 7} cm/s. A shock wave is generated in the residual argon plasma during the motion of the bunch, its density decreases to 10{sup 18} cm{sup –3} at a distance of 3 cm from its place of generation, and the plasmoid expands by 3–5 times and almost merges together with the leading edge of the shock wave.
Production and diffusion of H 2 O 2 during the interaction of a direct current pulsed atmospheric pressure plasma jet on a hydrogel
The interaction of cold atmospheric pressure plasma jets with hydrogels has been used as a model system to study the interaction of plasmas with tissues. In this study, we analyze the diffusion of reactive oxygen species (in particular H 2 O 2 ) and quantify the amount of plasma-produced H 2 O 2 species that penetrates into a gelatin hydrogel. We show that the diffusion constant of H 2 O 2 in 10% gelatin hydrogel is similar to its diffusion constant in water and that the production of H 2 O 2 in the hydrogel is significantly less than the production of H 2 O 2 in distilled water for the same plasma operation conditions suggesting that the scavenging of OH radicals at the plasma-gel interface significantly reduces the H 2 O 2 production.
Ion fluxes and memory effects in an Ar–O 2 modulated radiofrequency-driven atmospheric pressure plasma jet
In this work we used molecular beam mass spectrometry to characterize ion fluxes produced by a modulated radiofrequency (RF)-driven atmospheric pressure plasma jet operating in a homogeneous gas environment (Ar + 1% O 2 ). The influence of the RF modulation frequency (100 Hz to 20 kHz) on the ion fluxes was investigated by time-resolved measurements, and the lifetimes of the dominant ions, O 2 + , NO + , O − , O 2 − and O 3 − , were found to be 28 ± 2, 117 ± 8, 7.3 ± 0.4, 17 ± 1 and 23 ± 2 μs, respectively. The absolute ion densities in the near afterglow region were found to be of the order of 1011 cm−3. Significant differences in the dynamics of the positive and negative ions were found; these are explained by the presence of electrons at similar densities in the afterglow produced by electron detachment reactions from negative ions due to the large concentrations of atomic oxygen and singlet delta oxygen. Transitions in ion flux dynamics for different modulation frequencies and at the startup of the plasma were analyzed together with intensified charge coupled device images recording the plasma propagation in order to assess the dynamics of plasma plume propagation and how it is impacted by ‘memory effects’. Quantitative measurements of the ion densities enabling these memory effects are reported. The results in this paper highlight the tremendous impact of memory effects on plasma propagation and the corresponding pre-ionization.
O · , H · , and · OH radical etching probability of polystyrene obtained for a radio frequency driven atmospheric pressure plasma jet
Atmospheric pressure plasma jets have great potential for the surface modification of polymers. In this work, the authors report on polystyrene etching by a radio frequency driven atmospheric pressure plasma jet with a focus on the role of H · , O · , and · OH radicals in this process. The absolute flux of H · , O · , and · OH radicals reaching the surface of the polymer was determined by a COMSOL MULTIPHYSICS reacting fluid dynamics model incorporating detailed transport phenomena in the boundary layer near the substrate. The simulated results of H · and · OH densities in the jet effluent were experimentally verified by two-photon absorption laser induced fluorescence and laser induced fluorescence, respectively. The carbon atom removal flux from the polystyrene surface was taken from previously reported measurements using the same plasma source. The authors show that the boundary layer effects in the interfacial region above the substrate can have a significant impact on the calculated etching probabilities. The reaction probability (β) has a significant uncertainty although a variation of 2 orders of magnitude in β leads to uncertainties of approximately 1 order of magnitude variation in the determined etching probability. The etching probability of polystyrene by · OH radicals was confirmed to be at least an order of magnitude larger than the polystyrene etching probability by O · radicals. The authors also confirmed the weak polystyrene etching probability by H · radicals. The model suggests that the presence of a 30 ppm O 2 impurity can lead to the production of · OH radicals in the far effluent of the Ar + 1% H 2 plasma jet close to the substrate at sufficient densities to enable effective etching.
The interaction of an atmospheric pressure plasma jet with liquid water: dimple dynamics and its impact on crystal violet decomposition
Not Available
Analysis of the Ion Conversion Mechanisms in the Effluent of Atmospheric Pressure Plasma Jets in Ar with Admixtures of O 2 , H 2 O and Air
Ionic species in atmospheric pressure plasma jets (APPJs) play an important role in plasmasurface and plasma-liquid interactions, nonetheless, they have not received the same attention as their neutral reactive species counterparts. In this work, a molecular beam mass spectrometer (MBMS) was used to characterize the ion compositions in the effluent of an APPJ operating in ambient air for different feed gases including Ar + O 2 , Ar + air and Ar + H 2 O mixtures inspired by gas compositions used for biomedical applications. Changes in compositions of positive and negative ions as a function of nozzle-to-substrate distance along the plasma plume were analyzed and compared with a pseudo-1D plug flow model. Positive and negative ions were detected up to distances of 12 mm from the visible plasma plume tip. The measurements enable to follow the ion conversion pathways in the effluent of the APPJs as a function of distance from the nozzle. The trends in ion yield obtained from a pseudo-1D plug flow model showed generally a good agreement with the experimentally observed trends after addition of ionic reactions to the previously reported reaction set but also some distinctive differences were observed. The dominant positive ions in the far effluent are water ion clusters, the most stable ion for all gas mixtures investigated, while a large variety of negative ions was found for different gas mixtures.