Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMA LIFETIME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Laser ablation-induced spectral plasma characteristics in optical far- and near fields

The aim of this work is to elucidate the ablation-induced plasma physics for chemical species analysis by laser-induced breakdown spectroscopy at higher spatial resolution. To accomplish this, the effect of the laser spot size on the laser ablation-induced plasma characteristics is experimentally investigated, both in optical far-field and near-field ablation configurations, utilizing a Cr thin film of {approx}200 nm thickness on quartz substrate as a target. The far-field ablation is affected under tight focusing conditions, wherein nanosecond laser pulses of 532 nm wavelength are focused to laser focal spot diameters of {approx}7 and 1.5 {mu}m. The measured results show that the ablation-induced plasma from sub-10 {mu}m ablation craters exhibits complex three-dimensional behavior, leading to greatly reduced laser-plasma interaction and an order of magnitude shorter plasma lifetime. Nanosecond laser pulses of 532 nm wavelength are also coupled to a pulled fiber based near-field scanning optical microscopy probe. Due to the sharp tip presence in close proximity of the ablation craters, entirely different plasma evolution behavior is observed, highlighted by orders of magnitude shorter plasma lifetime and strongly directional material ejection. The ablation-induced plasma from reduced lateral crater dimensions both in far- and near-field shows improved contrast of atomic transition signals with respect to the wide-spectrum background, hence confirming the potential for laser-induced breakdown spectroscopy with high spatial resolution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Numerical simulations for cold layer formation in an inverse Z-pinch magnetized target fusion system

One-dimensional magnetohydrodynamic simulations have been performed to study cold layer formation in a magnetized target fusion system with an inverse Z-pinch target plasma. Three phases of cold layer evolution has been identified. During the early compression phase, when liner velocities were not high, formation of a ''classical'' cold layer is observed, with monotonically increasing plasma densities and decreasing temperatures as the liner is approached. During the main compression phase, lasting until close to peak compression, magnetic flux leakage from the plasma to the liner is not important. The cold layer is then characterized by monotonically decreasing plasma temperature, density, and thermal conductivity. This has practical significance, since it would tend to reduce thermal losses to the liner. During the late compression and burn phases, magnetic flux leakage into the liner becomes important. This phase is characterized by a rapid increase in density and a rapid decrease in magnetic field and temperature toward the liner. This yields significantly higher values of thermal conductivity than in the bulk plasma, leading to enhanced thermal losses. During the first two phases, the entire plasma is magnetically confined. During the last phase, the cold layer changes to a wall-confined mode, while the bulk plasma continues to be magnetically confined. This is a major difference from earlier assumptions about wall confinement of such plasmas. These results show that the Kadomtsev stability parameter exceeds unity in the cold layer during the second and third phases, which may be an indication of instability. The choice of the transport model has a significant effect upon plasma evolution and the plasma lifetime. Classical transport yields plasma density levels near the liner that are significantly higher, sometimes by orders of magnitude, than those yielded by Bohm transport. During the main compression phase, Bohm diffusivity yields a lower lifetime, as expected. During the early compression phase, however, the classical lifetime is unexpectedly below the Bohm value. A physical explanation has been provided for these trends.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High energy density Z-pinch plasmas using flow stabilization

The ZaP Flow Z-Pinch research project[1] at the University of Washington investigates the effect of sheared flows on MHD instabilities. Axially flowing Z-pinch plasmas are produced that are 100 cm long with a 1 cm radius. The plasma remains quiescent for many radial Alfvén times and axial flow times. The quiescent periods are characterized by low magnetic mode activity measured at several locations along the plasma column and by stationary visible plasma emission. Plasma evolution is modeled with high-resolution simulation codes – Mach2, WARPX, NIMROD, and HiFi. Plasma flow profiles are experimentally measured with a multi-chord ion Doppler spectrometer. A sheared flow profile is observed to be coincident with the quiescent period, and is consistent with classical plasma viscosity. Equilibrium is determined by diagnostic measurements: interferometry for density; spectroscopy for ion temperature, plasma flow, and density[2]; Thomson scattering for electron temperature; Zeeman splitting for internal magnetic field measurements[3]; and fast framing photography for global structure. Wall stabilization has been investigated computationally and experimentally by removing 70% of the surrounding conducting wall to demonstrate no change in stability behavior.[4] Experimental evidence suggests that the plasma lifetime is only limited by plasma supply and current waveform. The flow Z-pinch concept provides an approach to achieve high energy density plasmas,[5] which are large, easy to diagnose, and persist for extended durations. A new experiment, ZaP-HD, has been built to investigate this approach by separating the flow Z-pinch formation from the radial compression using a triaxial-electrode configuration. This innovation allows more detailed investigations of the sheared flow stabilizing effect, and it allows compression to much higher densities than previously achieved on ZaP by reducing the linear density and increasing the pinch current. Experimental results and scaling analyses will be presented. In addition to studying fundamental plasma science and high energy density physics, the ZaP and ZaP-HD experiments can be applied to laboratory astrophysics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Injection of auxiliary electrons for increasing the plasma density in highly charged and high intensity ion sources

Different electron guns based on cold- or hot-cathode technologies have been developed since 2009 at INFN for operating within ECR plasma chambers as sources of auxiliary electrons, with the aim of boosting the source performances by means of a higher plasma lifetime and density. Their application to microwave discharge ion sources, where plasma is not confined, has required an improvement of the gun design, in order to “screen” the cathode from the plasma particles. Experimental tests carried out on a plasma reactor show a boost of the plasma density, ranging from 10% to 90% when the electron guns are used, as explained by plasma diffusion models.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

FENIX: Towards a Fully Integrated Multiphysics Framework for Plasma Facing Component Modeling

Computational tools have a crucial role to play in accelerating the deployment of fusion as a clean, reliable, abundant, and sustainable energy source. Multiphysics, high-fidelity simulation capabilities can help model, study, and predict intricate interactions between materials performance, plasma exposure, neutron irradiation, and engineering processes. As such, they can assist in the resolution of scientific and engineering challenges underpinning design, construction, and commission of fusion power plants. To address these needs, ongoing efforts are leveraging the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework and delivering new computational tools for the fusion community. These tools inherit crucial attributes from MOOSE. They are open-source, modular, integrated with nuclear industry-standard software quality assurance processes, and enable multiphysics, multi-fidelity, fully integrated, zero- to three-dimensional, and massively parallel simulations. After a short overview of these capabilities, we will present the development of Fusion ENergy Integrated multiphys-X (FENIX), a MOOSE-based application designed to enable plasma facing component design and performance evaluation. Throughout their lifetime, plasma facing components are exposed to extreme thermal loads, repeated thermal shocks, and irradiation by plasma ions, neutral particles, and high-energy neutrons. Consequently, designing a plasma facing component with acceptable lifetime degradation is extremely challenging. FENIX aims to model the multiphysics environment in which plasma facing components evolve to accelerate their design studies. To that end, FENIX couples existing MOOSE capabilities such as heat transfer, thermomechanics, and thermal hydraulics, with tritium transport via the MOOSE-based Tritium Migration Analysis Program, Version 8 (TMAP8), with neutronics via the MOOSE-based high-fidelity neutron-photon transport and fluid dynamics code Cardinal, and finally with Particle-in-Cell plasma simulation capabilities being developed in this project. In this study, we present the current FENIX capabilities and preliminary results of its application to model the Tritium Plasma Experiment set up at Idaho National Laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron current extraction from a permanent magnet waveguide plasma cathode

An electron cyclotron resonance plasma produced in a cylindrical waveguide with external permanent magnets was investigated as a possible plasma cathode electron source. The configuration is desirable in that it eliminates the need for a physical antenna inserted into the plasma, the erosion of which limits operating lifetime. Plasma bulk density was found to be overdense in the source. Extraction currents over 4 A were achieved with the device. Measurements of extracted electron currents were similar to calculated currents, which were estimated using Langmuir probe measurements at the plasma cathode orifice and along the length of the external plume. The influence of facility effects and trace ionization in the anode-cathode gap are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suppression of drift waves in a linear magnetized plasma column

In magnetically confined fusion plasmas, drift wave driven turbulence can lead to enhanced particle transport from the plasma. Because of this, a significant research emphasis has been placed on the suppression of drift waves in the plasma edge. However, the combination of the toroidal geometry and short plasma lifetimes can make it difficult to fully characterize the properties of these instabilities. Because linear magnetized plasma devices offer a combination of simpler geometry and steady state plasma generation, it is possible to perform detailed studies of many types of plasma instabilities-including drift waves. This paper reports on a recent experiment in which low frequency instabilities ({omega} {<=} {omega}{sub ci}) in the Auburn Linear EXperiment for Instability Studies plasma device were characterized as drift waves and through changes in the parallel current, it is shown that it is possible to suppress these instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tailoring the air plasma with a double laser pulse

We present a comprehensive model of plasma dynamics that enables a detailed understanding of the ways the air plasma induced in the atmosphere in the wake of a laser-induced filament can be controlled by an additional laser pulse. Our model self-consistently integrates plasma-kinetic, Navier-Stokes, electron heat conduction, and electron-vibration energy transfer equations, serving to reveal laser-plasma interaction regimes where the plasma lifetime can be substantially increased through an efficient control over plasma temperature, as well as suppression of attachment and recombination processes. The model is used to quantify the limitations on the length of uniform laser-filament heating due to the self-defocusing of laser radiation by the radial profile of electron density. The envisaged applications include sustaining plasma guides for long-distance transmission of microwaves, standoff detection of impurities and potentially hazardous agents, as well as lightning control and protection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Using Charged Particle Imaging to Study Ultracold Plasma Expansion

We develop a projection imaging technique to study ultracold plasma dynamics. We image the charged particle spatial distributions by extraction with a high-voltage pulse onto a position-sensitive detector. Measuring the 2D width of the ion image at later times (the ion image size in the first 20 {mu}s is dominated by the Coulomb explosion of the dense ion cloud), we extract the plasma expansion velocity. These velocities at different initial electron temperatures match earlier results obtained by measuring the plasma oscillation frequency. The electron image size slowly decreases during the plasma lifetime because of the strong Coulomb force of the ion cloud on the electrons, electron loss and Coulomb explosion effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced plasma performance in C-2W advanced beam-driven field-reversed configuration experiments

TAE Technologies’ fifth-generation fusion device, C-2W (also called ‘Norman’), is the world’s largest compact-toroid device and has made significant progress in field-reversed configuration (FRC) plasma performance. C-2W produces record breaking, macroscopically stable, high-temperature advanced beam-driven FRC plasmas, dominated by injected fast particles and sustained in steady state, which is primarily limited by neutral-beam (NB) pulse duration. The NB power supply system has recently been upgraded to extend the pulse length from 30 ms to 40 ms, which allows for a longer plasma lifetime and thus better characterization and further enhancement of FRC performance. An active plasma control system is routinely used in C-2W to produce consistent FRC performance as well as for reliable machine operations using magnet coils, edge-biasing electrodes, gas injection and tunable-energy NBs. Google’s machine learning framework for experimental optimization has also been routinely used to enhance plasma performance. D

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synchrotron radiation by fast fermions in heavy-ion collisions

We study the synchrotron radiation of gluons by fast quarks in strong magnetic field produced by colliding relativistic heavy ions. We argue that due to high electric conductivity of plasma, the magnetic field is almost constant during the entire plasma lifetime. We calculate the energy loss due to synchrotron radiation of gluons by fast quarks. We find that the typical energy loss per unit length for a light quark at the Large Hadron Collider is a few GeV per fm. This effect alone predicts quenching of jets with p{sub perpendicular} up to about 20 GeV. We also show that the spin-flip transition effect accompanying the synchrotron radiation leads to a strong polarization of quarks and leptons with respect to the direction of the magnetic field. Observation of the lepton polarization may provide a direct evidence of existence of strong magnetic field in heavy-ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of non-neutral electron plasma confinement in harmonic and rectangular potentials in a very dense regime

Confinement of high density electron plasmas in a strong uniform magnetic field was experimentally studied in a multi-ring trap (MRT). The trap was housed inside a bore tube and surrounded by a superconducting solenoid. A 5 T magnetic field was used to provide radial confinement while an electrostatic harmonic or rectangular potential well was used for axial confinement. For trapped electrons of N = 1.2 Multiplication-Sign 10{sup 10} in a harmonic potential well (HPW) with the trap length of L{sub T} = 320 mm, the plasma lifetime was about 10{sup 4} s and it became much longer at lower N = 4.5 Multiplication-Sign 10{sup 9}. Such long holding times were achieved without application of rotating electric fields. Contrastingly, in a rectangular potential well (RPW), the plasma of N = 1.2 Multiplication-Sign 10{sup 10} under the same trap length expanded to cover the whole Faraday Cup within 200 s, where its radial expansion rate was {eta} = 3.2 Multiplication-Sign 10{sup -2} mm/s, which was 20 times faster than HPW. The lifetime for RPW became shorter with increasing L{sub T} and scaled as 1/[L{sub T}]{sup 2}. This scaling found for high density plasmas is similar to the obtained one with different Penning-Malmberg traps at UC San Diego (USCD).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Real-time monitoring of trace noble gases using laser-induced breakdown spectroscopy—An investigation of the impact of bulk gas on plasma properties and sensitivity

The impact of Ar and He bulk gases on laser-induced breakdown spectroscopy (LIBS) real-time monitoring of trace Xe and Kr was assessed. LIBS is being developed as a monitoring tool for measuring noble gas transport in molten salt systems, in which traditional sensors may face challenges associated with radiation, corrosive materials, and/or mixed phases. The plasma temperature and electron densities of LIBS plasmas were measured in both static and various flowing Ar and He streams (0–5 L min −1 ). The use of an Ar bulk gas resulted in higher plasma temperature, greater electron densities by an order of magnitude, and extended plasma lifetime compared with when He bulk gas was used. Gas flow rate was found to have little impact on plasma temperature; however, its effect on electron density was significant, indicating the need to consider flow rate–specific models. Matrix effects on emission peaks were reported for both bulk gases. Due to these matrix effects, multivariate models were developed for Xe and Kr ranging from 0 to 700 ppm in both bulk gases. Although the predictive behavior was similar (root mean square error of prediction ranging from 11.1 to 20.6 ppm), the limits of detection were superior in He (Xe: 22.9 ppm, Kr: 30.4 ppm). Furthermore, these models were employed in demonstrative real-time tests (>1 h), which showed strong predictive precision (relative standard deviation <5 %) regardless of the bulk gas. Ultimately, this study provides a guide for the considerations required when developing gaseous LIBS models for real-time monitoring.

Gas flow effects↗

Modeling of reference operating scenario of GOL-NB multiple-mirror trap

Currently, the GOL-NB multiple-mirror trap is being developed at the Budker Institute of Nuclear Physics, Siberian Branch, Russian Academy of Sciences. The main scientific goal pursued by building GOL-NB is direct demonstration of suppression of longitudinal losses of particles and energy from the trap by using sections with a multiple-mirror magnetic field, which can be attached to the central gas-dynamic trap. Plasma heating in GOL-NB will be accomplished by neutral beam injection with a power of up to 1.5MW. The paper presents the first results of modeling the dynamics of the plasma parameters and fast ions under the reference operating scenario of the trap in which traditional short magnetic mirrors, rather than multiple-mirror sections, are attached to the central trap. In such a configuration, the plasma lifetime in the trap is expected to be minimal. The modeling was performed by using the DOL kinetic code. As a result, the initial conditions of the experiments are refined and the requirements to the system of maintaining the particle balance in the trap are determined.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Z-pinch fusion

The Z-pinch configuration offers the promise of a compact fusion device owing to its simple geometry, unity beta, and absence of external magnetic field coils. Increasing the axial current compresses the plasma, resulting in a rapid rise of the fusion reaction rate. Historically, the Z pinch has been plagued by fast growing instabilities that limit plasma lifetimes. Recent progress has resulted from investigating approaches that provide stability. One approach exploits sheared-flow stabilization to produce an equilibrium Z pinch, which sustains the compressed plasma state for durations much longer than other plasma timescales. Recent experimental and simulation results encourage pursuit of the stabilized Z pinch to explore its fusion performance limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Diagnostics of fast formation of distributed plasma discharges using X-band microwaves

We present measurements of high power (25.7 kW), pulsed (800 ns), X-band (9.382 GHz) microwave breakdown plasmas, including reflected power measurements, mixer reflected amplitude and phase measurements, optical emission spectroscopy (OES) measurements, and an analysis that estimates the average electron density and electron temperature. In addition, a six-region, 1-D model was used to determine plasma parameters and compare with the experimental results. The experimental results show that using a 43 Hz repetition rate with an 800 ns pulse, fast (<300 ns) breakdown occurs in neon measured between 50 Torr and 250 Torr, producing plasma that lasts for over 7 μs. It also leads to large microwave reflections (70%) and an on-axis transmission attenuation of −15 dB. Moreover, a comparison between a 1-D model and mixer measurements shows that at 100 Torr, the neon plasma electron density peaked at 2 × 10{sup 12} cm{sup −3}, and the electron temperature peaked at 2.5 eV assuming a Maxwellian distribution. The addition of 2% Ar in Ne reduced the breakdown time and allowed OES measurements to determine the effective electron temperature. OES measurements of mixed (Ne/Ar: 98/2) argon line ratios (420.1 nm/419.8 nm) were used to determine the average effective electron temperature T{sub e(eff)} = 1.2 eV, averaged over the entire 7μs plasma lifetime. They indicate that the electron energy distribution was not Maxwellian but, instead, tended towards a Druyvesteyn character.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interpenetration and stagnation in colliding laser plasmas

We have investigated plasma stagnation and interaction effects in colliding laser-produced plasmas. For generating colliding plasmas, two split laser beams were line-focused onto a hemi-circular target and the seed plasmas so produced were allowed to expand in mutually orthogonal directions. This experimental setup forced the expanding seed plasmas to come to a focus at the center of the chamber. The interpenetration and stagnation of plasmas of candidate fusion wall materials, viz., carbon and tungsten, and other materials, viz., aluminum, and molybdenum were investigated in this study. Fast-gated imaging, Faraday cup ion analysis, and optical emission spectroscopy were used for diagnosing seed and colliding plasma plumes. Our results show that high-Z target (W, Mo) plasma ions interpenetrate each other, while low-Z (C, Al) plasmas stagnate at the collision plane. For carbon seed plasmas, an intense stagnation was observed resulting in longer plasma lifetime; in addition, the stagnation layer was found to be rich with C{sub 2} dimers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron evaporation from an ultracold plasma in a uniform electric field

Electrons in an expanding ultracold plasma are expected to be in quasiequilibrium since the collision times are short compared to the plasma lifetime, yet electron evaporation is observed as the ion density decreases during expansion. A small electric field that shifts the electron cloud with respect to the ions increases the evaporation rate. Treating the electrons as a zero-temperature fluid, their spatial distribution is calculated as a function of the applied field strength and the ion density. The zero-temperature approximation gives the maximum number of electrons the plasma can hold in the absence of evaporation. By applying this calculation at all times during expansion, the flux of cold electrons from the plasma is predicted and found to be in good agreement with the observed electron signal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗