Search NASA⌕ Search

SEARCH · Search NASA

Results for “PLASMATRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

The plasmatron: Advanced mode thermionic energy conversion

A theory of the plasmatron was developed. Also, a wide range of measurements were obtained with two versatile, research devices. To gain insight into plasmatron performance, the experimental results are compared with calculations based on the theoretical model of plasmatron operation. Results are presented which show that the plasma arc drop of the conventional arc (ignited) mode converter can be suppressed by use of an auxiliary ion source. The improved performance, however, is presently limited to low current densities because of voltage losses due to plasma resistance. This resistance loss could be suppressed by an increase in the plasma electron temperature or a decrease in spacing. Plasmatron performance characteristics for both argon and cesium are reported. The argon plasmatron has superior performance. Results are also presented for magnetic cutoff effects and for current distributing effects. These are shown to be important factors for the design of practical devices.

Hansen, L. K.↗

Low current plasmatron fuel converter having enlarged volume discharges

A novel apparatus and method is disclosed for a plasmatron fuel converter ("plasmatron") that efficiently uses electrical energy to produce hydrogen rich gas. The volume and shape of the plasma discharge is controlled by a fluid flow established in a plasma discharge volume. A plasmatron according to this invention produces a substantially large effective plasma discharge volume allowing for substantially greater volumetric efficiency in the initiation of chemical reactions within a volume of bulk fluid reactant flowing through the plasmatron.

30 DIRECT ENERGY CONVERSION↗

Installation of a Plasmatron at the Belgian Nuclear Research Centre and its Use for Plasma-Wall Interaction Studies

In JET and ITER, the first wall will be covered by beryllium and a full or partial W divertor will be common. In DEMO, only high-Z, low erosion material such as tungsten will be present as a plasma facing material. In present day tokamaks, the very high fluence/low temperature plasma cannot be obtained. Important key issues to be resolved according to plasma wall interaction studies are the tritium retention, dust production, resilience to large steady-state fluences, transient loads, surface erosion, material redeposition and neutron damage. Some linear plasma simulators come close to the very high fluences expected in ITER and DEMO such as PSI -2; PISCES-B; NAGDIS-II and pilot-PSI. In future the larger device MAGNUM-PSI will have even higher fluences and lower temperatures for large scale components. The plasmatron facility VISION I to be installed in Mol, will have the capability to investigate mixed materials (with beryllium/tritium contaminations) and in the long term neutron activated samples. The ETHEL plasmatron VISION I from JRC-Ispra was transferred to SCKCEN (Mol, Belgium) recently. The equipment is meant to study plasma-wall interaction, in particular the interaction with hydrogen isotopes. The facility is capable to produce relatively cold self-sustained volumetric plasmas with a high plasma flux density at the target of about 10{sup 20}-10{sup 21} ions/m{sup 2} .s. The plasmatron has a volume of 18 litres, a target diameter of {approx}25 cm and modular ion energies in the range of 20-500 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The plasmatron as an advanced performance thermionic converter

A study concerned with the improvement of thermionic converter performance has shown that the plasma arc drop of the conventional arc (ignited) mode converter can be suppressed by use of an auxiliary ion source as in a plasmatron converter. However, this improved performance is now limited to low current densities and narrow interelectrode spacings because of voltage losses due to plasma resistance. An examination of plasmatron performance characteristics for both argon and cesium plasma has shown that the argon plasmatron is superior.

Hansen, L. K.↗

Spectroscopic studies of non-thermal plasma jet at atmospheric pressure formed in low-current nonsteady-state plasmatron for biomedical applications

The optical and electrophysical characteristics of the nonequilibrium low-temperature plasma formed by a low-current nonsteady-state plasmatron are experimentally investigated in the present work. It is demonstrated that experimental data on the optical diagnostics of the plasma jet can provide a basis for the construction of a self-consistent physical and mathematical plasma model and for the creation of plasma sources with controllable electrophysical parameters intended for the generation of the required concentration of active particles. Results of spectroscopic diagnostics of plasma of the low-current nonsteady-state plasmatron confirm that the given source is efficient for the generation of charged particles and short-wavelength radiation—important plasma components for biomedical problems of an increase in the efficiency of treatment of biological tissues by charged particles. Measurement of the spatial distribution of the plasma jet potential by the probe method has demonstrated that a negative space charge is formed in the plasma jet possibly due to the formation of electronegative oxygen ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser plasmatron for diamond coating deposition

An experimental installation with a laser plasmatron based on a continuous wave CO{sub 2} laser with a radiation power of up to 3.5 kW has been created. The plasmatron design makes it possible to bring out the plasma jet into atmospheric air both along and across the laser beam direction. The spatial temperature distributions on the metal substrate surface heated by the plasma jet are measured. The threshold power for optical discharge maintenance as a function of the gas flow rate and the focal length of the focusing lens are obtained for an Ar and Ar/CH{sub 4}/H{sub 2} gas mixture under atmospheric pressure; the radiation spectrum of the discharge plasma is measured. A one-dimensional model of the discharge for estimation of its geometrical parameters in a convergent laser beam with consideration of radiation refraction on the discharge is given.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling instrumented test articles for Plasmatron X aerothermal environment

This work discusses the ablative response of thermal protection system materials when exposed to aerothermal environments. It focuses on modeling instrumented test article assemblies tested in the Plasmatron X inductively coupled plasma wind tunnel. For this purpose, as the samples are mounted to a water-cooled arm using numerous assembly components and are embedded with thermocouples for in-depth temperature measurements, the variation in ablative response of the samples as a result of these components is studied. The aerothermal boundary conditions for Plasmatron X are obtained for hypersonic flight-relevant conditions using the multi-physics aerothermal framework built at the University of Illinois at Urbana-Champaign. For simulating the material response, a material response code, Porous Material Analysis Toolbox based on OpenFOAM (PATO) is used. In PATO, numerous configurations and materials of thermocouples were studied. The optimal configuration for obtaining temperature measurements with minimal error using embedded thermocouples was found to be the U-shaped Type S, 30 American wire gauge thermocouple configuration.

Thermal Protection Systems↗

Modeling instrumented test articles for Plasmatron X aerothermal environment

This work discusses the ablative response of thermal protection system materials when exposed to aerothermal environments. It focuses on modeling instrumented test article assemblies tested in the Plasmatron X inductively coupled plasma wind tunnel. For this purpose, as the samples are mounted to a water-cooled arm using numerous assembly components and are embedded with thermocouples for in-depth temperature measurements, the variation in ablative response of the samples as a result of these components is studied. The aerothermal boundary conditions for Plasmatron X are obtained for hypersonic flight-relevant conditions using the multi-physics aerothermal framework built at the University of Illinois at Urbana-Champaign. For simulating the material response, a material response code, Porous Material Analysis Toolbox based on OpenFOAM (PATO) is used. In PATO, numerous configurations and materials of thermocouples were studied. The optimal configuration for obtaining temperature measurements with minimal error using embedded thermocouples was found to be the U-shaped Type S, 30 American wire gauge thermocouple configuration.

Thermal Protection Systems↗

Effect of ion beam irradiation on the structure of ZnO films deposited by a dc arc plasmatron

The deposition of polycrystalline ZnO film on a cold substrate was performed by using a plasmatron in rough vacuum condition. Low energy oxygen ion beam generated by a cold cathode ion source was introduced during the deposition process. The change of film property on the ion beam energy was checked. It is shown that irradiation by 200 eV ions improves crystalline structure of the film. Increasing of ion beam energy up to 400 eV leads to the degradation of a crystalline structure and decreases the deposition rate.

36 MATERIALS SCIENCE↗

Epitaxial synthesis of diamond layers on a monocrystalline diamond substrate in a torch microwave plasmatron

The epitaxial growth of a diamond single-crystal film in a torch microwave discharge excited by a magnetron of a domestic microwave oven with the power of {<=}1 kW in an argon-hydrogen-methane mixture with a high concentration of methane (up to 25% with respect to hydrogen) at atmospheric pressure on a sub-strate of a synthetic diamond single crystal (HPHP) with the orientation (100) and 4 Multiplication-Sign 4 mm in size is obtained. A discharge with the torch diameter of {approx}2 mm and the concentration of the microwave power absorbed in the torch volume of >10{sup 3} W/cm{sup 3} is shown to be effective for epitaxial enlargement of a single crystal of synthetic diamond. The structure of the deposited film with the thickness up to 10 {mu}m with high-quality morphology is investigated with an optical microscope as well as using the methods of the Raman scattering and scanning electron microscopy.

36 MATERIALS SCIENCE↗

Reduced Toxicity Fuel Satellite Propulsion System Including Plasmatron

A reduced toxicity fuel satellite propulsion system including a reduced toxicity propellant supply for consumption in an axial class thruster and an ACS class thruster. The system includes suitable valves and conduits for supplying the reduced toxicity propellant to the ACS decomposing element of an ACS thruster. The ACS decomposing element is operative to decompose the reduced toxicity propellant into hot propulsive gases. In addition the system includes suitable valves and conduits for supplying the reduced toxicity propellant to an axial decomposing element of the axial thruster. The axial decomposing element is operative to decompose the reduced toxicity propellant into hot gases. The system further includes suitable valves and conduits for supplying a second propellant to a combustion chamber of the axial thruster. whereby the hot gases and the second propellant auto-ignite and begin the combustion process for producing thrust.

Schneider, Steven J.↗

Analysis of non-equilibrium phenomena in inductively coupled plasma generators

This article addresses the modeling of non-equilibrium phenomena in inductively coupled plasma discharges. In the proposed computational model, the electromagnetic induction equation is solved together with the set of Navier-Stokes equations in order to compute the electromagnetic and flow fields, accounting for their mutual interaction. Semi-classical statistical thermodynamics is used to determine the plasma thermodynamic properties, while transport properties are obtained from kinetic principles, with the method of Chapman and Enskog. Particle ambipolar diffusive fluxes are found by solving the Stefan-Maxwell equations with a simple iterative method. Two physico-mathematical formulations are used to model the chemical reaction processes: (1) A Local Thermodynamics Equilibrium (LTE) formulation and (2) a thermo-chemical non-equilibrium (TCNEQ) formulation. In the TCNEQ model, thermal non-equilibrium between the translational energy mode of the gas and the vibrational energy mode of individual molecules is accounted for. The electronic states of the chemical species are assumed in equilibrium with the vibrational temperature, whereas the rotational energy mode is assumed to be equilibrated with translation. Three different physical models are used to account for the coupling of chemistry and energy transfer processes. Numerical simulations obtained with the LTE and TCNEQ formulations are used to characterize the extent of non-equilibrium of the flow inside the Plasmatron facility at the von Karman Institute. Each model was tested using different kinetic mechanisms to assess the sensitivity of the results to variations in the reaction parameters. A comparison of temperatures and composition profiles at the outlet of the torch demonstrates that the flow is in non-equilibrium for operating conditions characterized by pressures below 30 000 Pa, frequency 0.37 MHz, input power 80 kW, and mass flow 8 g/s.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure of Diamond-Like Silicon–Carbon Films Alloyed by Vanadium

The structure of diamond-like silicon–carbon films formed on silicon substrates by magnetron and plasmatron codeposition using a closed-field magnetron and a plasmatron activated by tungsten cathode has been studied by transmission electron microscopy. The main feature of the films alloyed by vanadium to concentrations of 12–31 at % was found to be a layered structure of the film cross section. It was established that vanadium alloying leads to the formation of vanadium carbide (VC) nanocrystals; the nanocrystal size increases from 1–2 to 10 nm. At the maximum vanadium content, VC nanocrystals have an anisotropic shape: they are extended in the direction perpendicular to the film–substrate interface.

36 MATERIALS SCIENCE↗

Coaxial microwave plasma source

Physical principles underlying the operation of a pulsed coaxial microwave plasma source (micro-wave plasmatron) are considered. The design and parameters of the device are described, and results of experimental studies of the characteristics of the generated plasma are presented. The possibility of application of this type of plasmatron in gas-discharge physics is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conversion of methane in a coaxial microwave torch

A microwave coaxial plasmatron (microwave torch) is used as a plasmachemical converter of methane into hydrogen and hydrocarbons. The measured energy cost of methane decomposition is close to its minimum theoretical value. Such a low energy cost is unsurpassed for reactors operating at atmospheric pressure. A model of the plasmachemical converter is constructed. The results of calculations in the frame-work of this model agree well with experimental data.

08 HYDROGEN↗

Study of the optical-discharge plasma in multicomponent mixtures of molecular gases

Based on a 5-kW cw CO{sub 2} laser, an atmospheric-pressure plasmatron for the gas-phase synthesis of diamond films is fabricated. The conditions of the existence of a laser plasma in molecular gas mixtures are determined. The minimal radiation powers required for maintaining a stationary optical discharge (SOD) are measured at different concentrations of the components of Ar-CH{sub 4}-H{sub 2} gas mixtures and different flow velocities. The emission spectra of the SOD plasma are measured in pure Ar and the Ar-H{sub 2}-CH{sub 4} mixture along and across the propagation direction of the plasma jet. The characteristic green emission spectrum at the plasma periphery exhibits the intense lines of the C{sub 2} radical, which is responsible, in our opinion, for the formation of polycrystalline diamond films. (interaction of laser radiation with matter. laser plasma)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Acetylene from the co-pyrolysis of biomass and waste tires or coal in the H{sub 2}/Ar plasma

Acetylene from carbon-containing materials via plasma pyrolysis is not only simple but also environmentally friendly. In this article, the acetylene produced from co-pyrolyzing biomass with waste tire or coal under the conditions of H{sub 2}/Ar DC arc plasma jet was investigated. The experimental results showed that the co-pyrolysis of mixture with biomass and waste tire or coal can improve largely the acetylene relative volume fraction (RVF) in gaseous products and the corresponding yield of acetylene. The change trends for the acetylene yield of plasma pyrolysis from mixture with raw sample properties were the same as relevant RVF. But the yield change trend with feeding rate is different from its RVF. The effects of the feeding rate of raw materials and the electric current of plasmatron on acetylene formation are also discussed.

01 COAL, LIGNITE, AND PEAT↗